Monitoring shear deformation of sliding zone via fiber Bragg grating and particle image velocimetry

Monitoring shear deformation of sliding zones is of great significance for understanding the landslide evolution mechanism,in which fiber optic strain sensing has shown great potential.However,the cor-relation between strain measurements of quasi-distributed fiber Bragg grating(FBG)sensing arrays and shear displacements of surrounding soil remains elusive.In this study,a direct shear model test was conducted to simulate the shear deformation of sliding zones,in which the soil internal deformation was captured using FBG strain sensors and the soil surface deformation was measured by particle image velocimetry(PIV).The test results show that there were two main slip surfaces and two secondary ones,developing a spindle-shaped shear band in the soil.The formation of the shear band was successfully captured by FBG sensors.A sinusoidal model was proposed to describe the fiber optic cable deformation behavior.On this basis,the shear displacements and shear band widths were calculated by using strain measurements.This work provides important insight into the deduction of soil shear deformation using soil-embedded FBG strain sensors.

Determination of the Postmortem Interval Using Fiber Bragg Grating Sensors

Fiber Bragg grating(FBG)sensors are often used in monitoring activities and to ensure that environmental parameters satisfy industrial requirements.They offer crucial safety measures in the early detection of hazards due to their greatly reduced size,low weight,flexibility,and immunity to electromagnetic interference.These characteristics make FBGs suitable also for use in relation to the human body for in vivo measurements and long-term monitoring.In this study,recent developments are presented with regard to the utilization of these sensors to measure the so-called post-mortem interval(PMI).Such developments rely on numerical simulations based on the Matlab software and monitoring of the rectal temperature,which is one of the main parameters for estimating the PMI.First,the Matlab software is used to solve the Henssge equation for different ambient temperatures and for different body masses;then a Bragg grating sensors is used for post-mortem dating.The results and their accuracy are discussed.

Demodulation System for Fiber Bragg Grating Sensors Using Digital Filtering Technique

A discrimination measurement method and demodulation technique for fiber Bragg grating (FBG) sensors were presented using digital filtering technique. The system can control a tunable fiber Fabry-Perot filter with sawtooth wave voltage generated by digital clock to interrogate FBG sensors. Using the analogue digital converter (ADC), the reflected FBG signals were sampled with synchronous digital clock. With the aid of digital matched filtering technique, the sampled FBG signals were processed to obtain the maximum signal-to-noise ratio (SNR) and the Bragg wavelength shift from the FBG signals was recovered. The results demonstrate that this system has a scanning range of 1 520 nm-1 575 nm,and the wavelength detection accuracy is less than 2 pm with 1.5 Hz scanning frequency.

Advances in femtosecond laser direct writing of fiber Bragg gratings in multicore fibers:technology,sensor and laser applications

In this article,we review recent advances in the technology of writing fiber Bragg gratings(FBGs)in selected cores of multicore fibers(MCFs)by using femtosecond laser pulses.The writing technology of such a key element as the FBG opens up wide opportunities for the creation of next generation fiber lasers and sensors based on MCFs.The advantages of the technology are shown by using the examples of 3D shape sensors,acoustic emission sensors with spatially multiplexed channels,as well as multicore fiber Raman lasers.

Resistance Spot Welding Method for Metal-Based Fiber Bragg Grating Sensors

Aiming at the requirements of installation and work environment of metal-based fiber Bragg grating(FBG)sensor,a resistance spot welding method is presented.Firstly,the effect of welding parameters on welding quality is discussed theoretically,and a suitable resistance spot welding method for the metal-based FBG sensor is proposed for the first time.Then through serial resistance spot welding tests,the feasibility and practicability of the method are verified,and optimal welding parameters for two different tested metals are obtained.Fatigue performance test validates FBG sensors installed by the proposed method with good fatigue properties and long-term stable measurement performance.The research results can provide technical guidance for engineering structure long-term safety monitoring.

An active temperature compensated fiber Bragg grating vibration sensor for high-temperature application

An active temperature compensated fiber Bragg grating(FBG)vibration sensor with a constant section cantilever beam is proposed for the simultaneous measurement of temperature and vibration,and the sensor is verified by a temperature compensation feedback system.The high-temperature vibration sensor is composed of a quartz cantilever beam and a femtosecond Bragg grating.The feedback control demodulation system of active temperature compensation can adjust the laser wavelength to stabilize the grating offset point and realize simultaneous measurement of temperature and vibration.On this basis,the performance of the sensor is tested and analyzed within the range of 20-400℃by setting up a high-temperature vibration test system.The experimental results show that the sensitivity of the sensor is about 132.33 mV/g,and the nonlinearity is about 3.33%.The sensitivity between the laser wavelength and temperature is about 0.01307 nm/℃.In addition,the active temperature compensated fiber Bragg grating vibration sensor has the advantages of a simple structure,stable performance,easy demodulation and high sensitivity.Moreover,the sensor can achieve high temperature vibration signal monitoring and has good practical application value.

Packaging Effects on Fiber Bragg Grating Sensor Performance

In this paper, the effects of packaging material and structure of fiber Bragg grating sensor performance are investigated. The effects of thermal expansion coefficient of different embedding materials on the temperature sensitivities of the FBG sensors are studied both theoretically and experimentally with good agreement, which provides a means for selection of FBG packaging material to achieve desired temperature sensitivity. We also demonstrate a 4-point bending structured FBG lateral force sensor that measures up to 242N force with well-preserved reflection spectrum, whereas for 3-point bending structure, multiple-peaks start to occur when applied force reaches 72N.

High sensitivity micro-displacement sensor based on fiber Bragg grating and amplification substrate

A micro-displacement sensor based on fiber Bragg grating(FBG) is proposed. The device consists of a pair of FBGs with different central wavelengths fabricated by femtosecond laser phase mask method and a metal substrate with lever structure. The displacement is amplified by lever structure and it converts into axial tension of FBG, which has a high displacement sensitivity. The amplification factors obtained by theoretical analysis and finite element simulation are 2.67 and 2.50, respectively. The experimental results show that in the range of 0-50 μm the shift of FBG center wavelength is linearly related to the displacement of measured object and displacement sensitivity reaches 121 pm/μm. In addition, the cascaded FBG is used to compensate the temperature.

Experimental Measurements of the Sensitivity of Fiber-optic Bragg Grating Sensors with a Soft Polymeric Coating under Mechanical Loading,Thermal and Magnetic under Cryogenic Conditions

The strain and temperature sensing performance of fiber-optic Bragg gratings （FBGs） with soft polymeric coating, which can be used to sense internal strain in superconducting coils, are evaluated under variable cryogenic field and magnetic field. The response to a temperature and strain change of coated-soft polymeric FBGs is tested by comparing with those of coated-metal FBGs. The results indicate that the coated-soft polymeric FBGs can freely detect temperature and thermal strain, their At variable magnetic field, the tested results indicate accuracy and repeatability are also discussed in detail. that the cross-coupling effects of FBGs with different matrixes are not negligible to measure electromagnetic strain during fast excitation. The present results are expected to be able to provide basis measurements on the strain of pulsed superconducting magnet/cable （cable- around-conduit conductors, cable-in-conduit conductors）, independently or utilized together with other strain measurement methods.

Interrogating a Fiber Bragg Grating Vibration Sensor by Narrow Line Width Light

A method to interrogate fiber Bragg grating vibration sensor by narrow line width light is demonstrated. The interrogation scheme takes advantage of the intensity modulation of narrow spectral bandwidth light, such as distributed feedback laser, when a reflection or transmission spectrum curve of an fiber Bragg grating （FBG） moves due to the strain which is applied on the sensor. The sensor＇s response to accelerating frequency and amplitude is measured by experiment. The factors which have impacts on the sensitivity of the interrogation system are also discussed.

Magneto-Optic Fiber Bragg Gratings with Application to High-Resolution Magnetic Field Sensors

Magneto-optic fiber Bragg gratings （MFBG） based on magneto-optic materials have a lot of potential applications for sensing and optical signal processing. The transmission and reflection spectra of guided optical waves in the MFBG are investigated. According to the sensitivity of MFBG spectral lines to the magneto-optic coupling intensity varying with applied magnetic field, a novel magnetic field sensor of high-resolution up to 0.01 nm/（kA/m） is predicted.

Fiber Bragg Grating Sensor Array System Based on Digital Phase Generated Carrier Demodulation and Reference Compensation Method

A novel fiber Bragg grating （FBG） sensor array system based on digital phase generated carrier （PGC） demodulation and reference compensation method is proposed and set up. Experimental results confirm that the digital PGC demodulation can be used for wavelength-division-multiplexed FBG sensor array and the reference compensation method can reduce the environmental interference by approximately 40 dB in the frequency range from 20 Hz to 2 kHz. The minimum detectable wavelength-shift of the sensor system is 1 × 10^-3 pm/Hz^1/2.

Optical fiber Bragg grating sensors in smart structures

ＯｐｔｉｃａｌｆｉｂｅｒＢｒａｇｇｇｒａｔｉｎｇｓｅｎｓｏｒｓｉｎｓｍａｒｔｓｔｒｕｃｔｕｒｅｓＷｅｉｃｈｏｎｇＤｕ１，２，ＷＪｉｎ２，ＳＨＬｉｕ１（１ＨｏｎｇＫｏｎｇＰｏｌｙｔｅｃｈｎｉｃＵｎｉｖ．２ＳｏｕｔｈＣｈｉｎａＮｏｒｍａｌＵｎｉｖ．）Ｏｐ...

Time Division Multiplexing Fiber Bragg Grating Sensor System Using Composite Codes

A novel multi-point sensing scheme to improve the signal-to-noise ratio(SNR),temperature measurement range of the fiber Bragg grating(FBG)sensors is proposed.The new sensing scheme adopted a composite coding technique based on Simplex codes and Golay codes and time division multiplexing technique to enhance the performance of the sensing system.Simulation results,in good agreement with the theory,confirmed that the maximum SNR enhancement of the sensor system employing composite coding based on 15-bit Simplex codes and 16-bit Golay codes was approximately 6.01 dB in comparison to the conventional single pulse case.

Characteristics of Smart Concrete with Fiber Optical Bragg Grating Sensor

Based on the advantages of the fiber Bragg grating sensing technology,this paper presents a principle of a novel smart concrete with fiber optical Bragg grating sensor,analyses the theory and characteristics,illustrates the key technology and method to make the fiber Bragg grating sensor for the smart concrete,and proves the feasibility with experiments.The results indicate that the smart concrete with fiber Bragg grating sensors is feasible in the structure monitoring and damage diagnosing in the long run.

A Fiber-Optical Intrusion Alarm System Based on Quasi-Distributed Fiber Bragg Grating Sensors

A fiber-optical intrusion alarm system based on quasi-distributed fiber Bragg grating （FBG） sensors is demonstrated in this paper. The algorithms of empirical mode decomposition （EMD） and wavelet packet characteristic entropy are adopted to determine the intrusion location. The intrusion alarm software based on the Labview is developed, and it is also proved by the experiments. The results show that such a fiber-optical intrusion alarm system can offer the automatic intrusion alarm in real-time.

基于正弦式波纹膜片的压差式FBG静力水准仪

为解决建筑物不均匀沉降长期、可靠监测的问题,基于连通器原理,推导了膜片半径r、刚度K、光纤自由段长度l、波长变化量Δλ_(B)等参数和沉降量的线性关系式。以此设计了带有正弦式波纹膜片的压差式光纤布拉格光栅(FBG)静力水准仪,并通过标定试验验证压差式FBG静力水准仪的传感性能。结果表明:此静力水准仪灵敏度不小于13.2 pm/mm,综合误差不大于3.26%,相关性系数均在0.99以上。该型静力水准仪传感性能满足工程结构沉降测量的要求,丰富了FBG静力水准仪的研究,具有理论和现实意义。

基于应变增敏的双层十字型FBG触觉感知单元

触觉感知是仿生智能感知的重要内容,为了提高光纤布拉格光栅(Fiber Bragg Grating, FBG)触觉感知灵敏度,结合机器手指尖触觉感知需求,提出了一种应变增敏的FBG触觉感知单元。基于应变增敏机理和触觉感知机理分析,设计了一种基于应变增敏的双层十字型FBG触觉感知单元,采用刚性球型多点增压结构进行应变增敏。利用仿真分析方法优化了FBG空间分布,并对感知单元进行了静力学和热力学仿真。最后搭建了触觉感知实验平台,结合机器手完成了温度-力触觉协同感知实验。仿真和实验结果表明,FBG1和FBG2的力触觉感知灵敏度分别为18.069 nm/MPa和1.065 nm/MPa,温度感知灵敏度为11.256 pm/℃和11.153 pm/℃。该触觉感知单元有效提高了触觉感知灵敏度,具有良好的线性度和重复性。

FBG传感器在起重机械局部损伤监测中的应用研究

光纤布拉格光栅(Fiber Bragg Grating,FBG)传感器自身应变传递特性和敏感范围波动较大,在应用过程中缺少结合被测结构性能和FBG传感器本身结构特点的应用方法。为此,研究FBG传感器在起重机械局部损伤监测中的应用。根据起重机械的内部振动状况构建损伤模型,在FBG传感器光纤的同一位置放置两个不同的Bragg光栅,并根据波长变化采集局部损伤数据,将采集到的数据输入自回归滑动平均模型(Autoregressive Moving Average Model,ARMA)中,提取损伤状态,完成起重机械局部损伤监测。实验结果表明,所提方法的反馈时间低于0.25 ms,监测到的应变数据与实际应变数据差距相近,监测的损伤部位与设定损伤部位一致,证明该方法监测反馈效率和监测精度高,监测效果好,适用于各种环境下的起重机械局部监测工作。

基于WOA-ELM的空间分层结构FBG三维振动加速度传感器非线性解耦

针对三维振动加速度传感器存在的维间耦合干扰问题,以空间分层结构光纤布拉格光栅(FBG)三维振动加速度传感器为研究对象,阐述了三维振动加速度传感的基本原理。其次,构建了振动加速度动态标定实验平台,并分析了传感器的结构耦合特性。最后,提出一种基于鲸鱼算法优化极限学习机(WOA-ELM)的神经网络模型并进行了非线性解耦实验,其结果显示,在x、y、z三轴的平均测量误差分别降至1.58%、1.17%、0.95%,平均I类和II类误差最大值分别降至0.73%和0.37%。为验证解耦效果,将WOA-ELM与其他算法等进行解耦效果对比。结果表明,WOA-ELM更有效地降低三维振动加速度传感器的维间耦合干扰,提高测量精度。