Monitoring shear deformation of sliding zone via fiber Bragg grating and particle image velocimetry

Monitoring shear deformation of sliding zones is of great significance for understanding the landslide evolution mechanism,in which fiber optic strain sensing has shown great potential.However,the cor-relation between strain measurements of quasi-distributed fiber Bragg grating(FBG)sensing arrays and shear displacements of surrounding soil remains elusive.In this study,a direct shear model test was conducted to simulate the shear deformation of sliding zones,in which the soil internal deformation was captured using FBG strain sensors and the soil surface deformation was measured by particle image velocimetry(PIV).The test results show that there were two main slip surfaces and two secondary ones,developing a spindle-shaped shear band in the soil.The formation of the shear band was successfully captured by FBG sensors.A sinusoidal model was proposed to describe the fiber optic cable deformation behavior.On this basis,the shear displacements and shear band widths were calculated by using strain measurements.This work provides important insight into the deduction of soil shear deformation using soil-embedded FBG strain sensors.

Advances in femtosecond laser direct writing of fiber Bragg gratings in multicore fibers:technology,sensor and laser applications

In this article,we review recent advances in the technology of writing fiber Bragg gratings(FBGs)in selected cores of multicore fibers(MCFs)by using femtosecond laser pulses.The writing technology of such a key element as the FBG opens up wide opportunities for the creation of next generation fiber lasers and sensors based on MCFs.The advantages of the technology are shown by using the examples of 3D shape sensors,acoustic emission sensors with spatially multiplexed channels,as well as multicore fiber Raman lasers.

Demodulation System for Fiber Bragg Grating Sensors Using Digital Filtering Technique

A discrimination measurement method and demodulation technique for fiber Bragg grating (FBG) sensors were presented using digital filtering technique. The system can control a tunable fiber Fabry-Perot filter with sawtooth wave voltage generated by digital clock to interrogate FBG sensors. Using the analogue digital converter (ADC), the reflected FBG signals were sampled with synchronous digital clock. With the aid of digital matched filtering technique, the sampled FBG signals were processed to obtain the maximum signal-to-noise ratio (SNR) and the Bragg wavelength shift from the FBG signals was recovered. The results demonstrate that this system has a scanning range of 1 520 nm-1 575 nm,and the wavelength detection accuracy is less than 2 pm with 1.5 Hz scanning frequency.

Resistance Spot Welding Method for Metal-Based Fiber Bragg Grating Sensors

Aiming at the requirements of installation and work environment of metal-based fiber Bragg grating(FBG)sensor,a resistance spot welding method is presented.Firstly,the effect of welding parameters on welding quality is discussed theoretically,and a suitable resistance spot welding method for the metal-based FBG sensor is proposed for the first time.Then through serial resistance spot welding tests,the feasibility and practicability of the method are verified,and optimal welding parameters for two different tested metals are obtained.Fatigue performance test validates FBG sensors installed by the proposed method with good fatigue properties and long-term stable measurement performance.The research results can provide technical guidance for engineering structure long-term safety monitoring.

An active temperature compensated fiber Bragg grating vibration sensor for high-temperature application

An active temperature compensated fiber Bragg grating(FBG)vibration sensor with a constant section cantilever beam is proposed for the simultaneous measurement of temperature and vibration,and the sensor is verified by a temperature compensation feedback system.The high-temperature vibration sensor is composed of a quartz cantilever beam and a femtosecond Bragg grating.The feedback control demodulation system of active temperature compensation can adjust the laser wavelength to stabilize the grating offset point and realize simultaneous measurement of temperature and vibration.On this basis,the performance of the sensor is tested and analyzed within the range of 20-400℃by setting up a high-temperature vibration test system.The experimental results show that the sensitivity of the sensor is about 132.33 mV/g,and the nonlinearity is about 3.33%.The sensitivity between the laser wavelength and temperature is about 0.01307 nm/℃.In addition,the active temperature compensated fiber Bragg grating vibration sensor has the advantages of a simple structure,stable performance,easy demodulation and high sensitivity.Moreover,the sensor can achieve high temperature vibration signal monitoring and has good practical application value.

Packaging Effects on Fiber Bragg Grating Sensor Performance

In this paper, the effects of packaging material and structure of fiber Bragg grating sensor performance are investigated. The effects of thermal expansion coefficient of different embedding materials on the temperature sensitivities of the FBG sensors are studied both theoretically and experimentally with good agreement, which provides a means for selection of FBG packaging material to achieve desired temperature sensitivity. We also demonstrate a 4-point bending structured FBG lateral force sensor that measures up to 242N force with well-preserved reflection spectrum, whereas for 3-point bending structure, multiple-peaks start to occur when applied force reaches 72N.

High sensitivity micro-displacement sensor based on fiber Bragg grating and amplification substrate

A micro-displacement sensor based on fiber Bragg grating(FBG) is proposed. The device consists of a pair of FBGs with different central wavelengths fabricated by femtosecond laser phase mask method and a metal substrate with lever structure. The displacement is amplified by lever structure and it converts into axial tension of FBG, which has a high displacement sensitivity. The amplification factors obtained by theoretical analysis and finite element simulation are 2.67 and 2.50, respectively. The experimental results show that in the range of 0-50 μm the shift of FBG center wavelength is linearly related to the displacement of measured object and displacement sensitivity reaches 121 pm/μm. In addition, the cascaded FBG is used to compensate the temperature.

Experimental Measurements of the Sensitivity of Fiber-optic Bragg Grating Sensors with a Soft Polymeric Coating under Mechanical Loading,Thermal and Magnetic under Cryogenic Conditions

The strain and temperature sensing performance of fiber-optic Bragg gratings （FBGs） with soft polymeric coating, which can be used to sense internal strain in superconducting coils, are evaluated under variable cryogenic field and magnetic field. The response to a temperature and strain change of coated-soft polymeric FBGs is tested by comparing with those of coated-metal FBGs. The results indicate that the coated-soft polymeric FBGs can freely detect temperature and thermal strain, their At variable magnetic field, the tested results indicate accuracy and repeatability are also discussed in detail. that the cross-coupling effects of FBGs with different matrixes are not negligible to measure electromagnetic strain during fast excitation. The present results are expected to be able to provide basis measurements on the strain of pulsed superconducting magnet/cable （cable- around-conduit conductors, cable-in-conduit conductors）, independently or utilized together with other strain measurement methods.

Interrogating a Fiber Bragg Grating Vibration Sensor by Narrow Line Width Light

A method to interrogate fiber Bragg grating vibration sensor by narrow line width light is demonstrated. The interrogation scheme takes advantage of the intensity modulation of narrow spectral bandwidth light, such as distributed feedback laser, when a reflection or transmission spectrum curve of an fiber Bragg grating （FBG） moves due to the strain which is applied on the sensor. The sensor＇s response to accelerating frequency and amplitude is measured by experiment. The factors which have impacts on the sensitivity of the interrogation system are also discussed.

Magneto-Optic Fiber Bragg Gratings with Application to High-Resolution Magnetic Field Sensors

Magneto-optic fiber Bragg gratings （MFBG） based on magneto-optic materials have a lot of potential applications for sensing and optical signal processing. The transmission and reflection spectra of guided optical waves in the MFBG are investigated. According to the sensitivity of MFBG spectral lines to the magneto-optic coupling intensity varying with applied magnetic field, a novel magnetic field sensor of high-resolution up to 0.01 nm/（kA/m） is predicted.

Fiber Bragg Grating Sensor Array System Based on Digital Phase Generated Carrier Demodulation and Reference Compensation Method

A novel fiber Bragg grating （FBG） sensor array system based on digital phase generated carrier （PGC） demodulation and reference compensation method is proposed and set up. Experimental results confirm that the digital PGC demodulation can be used for wavelength-division-multiplexed FBG sensor array and the reference compensation method can reduce the environmental interference by approximately 40 dB in the frequency range from 20 Hz to 2 kHz. The minimum detectable wavelength-shift of the sensor system is 1 × 10^-3 pm/Hz^1/2.

Optical fiber Bragg grating sensors in smart structures

ＯｐｔｉｃａｌｆｉｂｅｒＢｒａｇｇｇｒａｔｉｎｇｓｅｎｓｏｒｓｉｎｓｍａｒｔｓｔｒｕｃｔｕｒｅｓＷｅｉｃｈｏｎｇＤｕ１，２，ＷＪｉｎ２，ＳＨＬｉｕ１（１ＨｏｎｇＫｏｎｇＰｏｌｙｔｅｃｈｎｉｃＵｎｉｖ．２ＳｏｕｔｈＣｈｉｎａＮｏｒｍａｌＵｎｉｖ．）Ｏｐ...

Time Division Multiplexing Fiber Bragg Grating Sensor System Using Composite Codes

A novel multi-point sensing scheme to improve the signal-to-noise ratio(SNR),temperature measurement range of the fiber Bragg grating(FBG)sensors is proposed.The new sensing scheme adopted a composite coding technique based on Simplex codes and Golay codes and time division multiplexing technique to enhance the performance of the sensing system.Simulation results,in good agreement with the theory,confirmed that the maximum SNR enhancement of the sensor system employing composite coding based on 15-bit Simplex codes and 16-bit Golay codes was approximately 6.01 dB in comparison to the conventional single pulse case.

Characteristics of Smart Concrete with Fiber Optical Bragg Grating Sensor

Based on the advantages of the fiber Bragg grating sensing technology,this paper presents a principle of a novel smart concrete with fiber optical Bragg grating sensor,analyses the theory and characteristics,illustrates the key technology and method to make the fiber Bragg grating sensor for the smart concrete,and proves the feasibility with experiments.The results indicate that the smart concrete with fiber Bragg grating sensors is feasible in the structure monitoring and damage diagnosing in the long run.

Determination of the Postmortem Interval Using Fiber Bragg Grating Sensors

Fiber Bragg grating(FBG)sensors are often used in monitoring activities and to ensure that environmental parameters satisfy industrial requirements.They offer crucial safety measures in the early detection of hazards due to their greatly reduced size,low weight,flexibility,and immunity to electromagnetic interference.These characteristics make FBGs suitable also for use in relation to the human body for in vivo measurements and long-term monitoring.In this study,recent developments are presented with regard to the utilization of these sensors to measure the so-called post-mortem interval(PMI).Such developments rely on numerical simulations based on the Matlab software and monitoring of the rectal temperature,which is one of the main parameters for estimating the PMI.First,the Matlab software is used to solve the Henssge equation for different ambient temperatures and for different body masses;then a Bragg grating sensors is used for post-mortem dating.The results and their accuracy are discussed.

A Fiber-Optical Intrusion Alarm System Based on Quasi-Distributed Fiber Bragg Grating Sensors

A fiber-optical intrusion alarm system based on quasi-distributed fiber Bragg grating （FBG） sensors is demonstrated in this paper. The algorithms of empirical mode decomposition （EMD） and wavelet packet characteristic entropy are adopted to determine the intrusion location. The intrusion alarm software based on the Labview is developed, and it is also proved by the experiments. The results show that such a fiber-optical intrusion alarm system can offer the automatic intrusion alarm in real-time.

Study on rock deformation monitoring using fiber Bragg grating in simulation experiment

Presented the fiber Bragg grating （FBG） sensors for rock strain monitoring in the 1.2 m long plane stress model of the simulation experiment. In the past, for the lack of appropriate technique to measure the deformation of rock structures, the measurement of deflection was restricted to just a few discrete points along rock, and the measuring points were limited to the location installed with displacement transducers. We developed a method to monitor the deformation of rock structures using fiber optical Bragg grating strain sensors. The sensors were embedded in rock layers of simulation experiment before the materials were put in. These sensors were then used to monitor the experienced strain with different face advancing distance. The test results indicate that, if properly installed, FBG sensors can survive under severe conditions associated with embedment process and yield accurate measurements of strains response. At the same time, we make comparisons of the data obtained by FBG sensors with those by centesimal gauge. The interest in FBG sensors was motivated by the potential advantages that they can offer more than existing sensing technologies.

Engineering approach to in-situ bridge health monitoring with fiber bragg gratings

In this presentation the feasibility and capability of fiber Bragg gratings （FBG） employed in bridge health monitoring are demonstrated on a real bridge. FBG＇ s wavelength shift depending on strain variance has been tested. The technique of FBG installation on bridges has been developed. 12 FBG strain sensors and 3 temperature sensors have been successfully embedded in the prestressed concrete box girder during the construction of Heilongjiang Hulan River Bridge. The prestressing tension process and quasi-static loading process of the girder were monitored with those sensors before it was installed onto the bridge. After the bridge was completed, the FBG sensors embedded have been utilized to monitor the strain shift of the beam under quasi-static load, traffic load and temperature. The results show that the traffic fluxes, possible tatigue damage and deflection of the bridge can be revealed conveniently through strain measurements with these FBG sensors, which provide key information for structural health diagnosis. The fact that the FBG strain sensors have withstood the ordeal of harsh construction process and lasted for more than one year proves that their durability and stability can satisfy the requirements for bridge health monitoring. It is also shown that the FBG strain sensor is more adaptive to long-term structural health monitoring than the electric resistance strain gauge.

Cascaded tilted fiber Bragg grating for enhanced refractive index sensing

We proposed and experimentally demonstrated a cascaded tilted fiber Bragg grating(TFBG)for enhanced refractive index sensing.The TFBG is UV-inscribed in series in ordinary single-mode fiber(SMF)and reduced-diameter SMF with the same tilt angle,and then excites two sets of superposed spectral combs of cladding modes.The cascaded TFBG with total length of 18 mm has a much wider wavelength range over 100 nm and narrower wavelength separation than that of a TFBG only in the SMF,enabling an enlarged range and a higher accuracy of refractive index measurement.The fabricated TFBG with the merits of enhanced sensing capability and temperature self-calibration presents great potentials in the biochemical sensing applications.

Fiber Bragg Grating Based Sensing'Platform for Foot Plantar Pressure Measurement

presented an application of using 3 D printing technique for the design and fabrication of a novel fiber Bragg grating( FBG)based sensing platform for foot planar pressure measurement.Pressure sensing unit was fabricated using 3 D printing technique by layering of extruded polylactic acid( PLA) material and mounting FBG sensor at the center of each sensing unit for pressure measurement. Performance of the sensing system was validated by applying load step by step as well as cyclic load on FBG pressure sensors. A simulation study was carried out using the sensing platform to assess foot plantar pressure distribution arises from weight gaining and losing processes of pregnant woman. The monitored four different foot positions such as first metatarsus,second metatarsus,mid-foot and heel exhibited obvious differences during testing process. Foot plantar pressure of heel was 1. 7 times of the pressure occurred at the first and second metatarsus( fore-foot),while there was limited pressure occurred at the mid-foot position during weight gaining process of a female subject. The occurred pressures at the two metatarsus areas were around 90%( pressure ratio) of heel and decreased continuously as the increase of subject weight,but weight losing process had very limited influence on this pressure ratio. Center of gravity of pregnant woman was found to shift backward substantially during the weighting gaining process,leading to a significant rise of the heel pressure. Hence, the protection of the heel position for female is highly important during both pregnancy and after baby delivery.