The supercontinuum （SC） generation in all-normal dispersion （ANDi） photonic-crystal fiber （PCF） pumped by high power picosecond pulses are investigated in this paper. Our results show that an octave SC may be ac...The supercontinuum （SC） generation in all-normal dispersion （ANDi） photonic-crystal fiber （PCF） pumped by high power picosecond pulses are investigated in this paper. Our results show that an octave SC may be achieved by pumping the ANDi PCF with picosecond pump pulses. However, the PCF length required may have to be lengthened to several tens of centimeters, which is much longer than that with femtosecond pump pulses. The relatively long PCF gives rise to much higher Raman gain and stronger Raman frequency shift compared to those with femtosecond pump pulses, which in turn not only cause a distorted temporal waveform and an un-flattened spectrum, but also severely degrade the coherence of the generated SC.展开更多
Based on the concepts of fractal super fibers, the （3, 9＋2）-circle and （9＋2, 3）-circle binary fractal sets are abstracted form such prototypes as wool fibers and human hairs, with the （3）-circle and the （9＋2...Based on the concepts of fractal super fibers, the （3, 9＋2）-circle and （9＋2, 3）-circle binary fractal sets are abstracted form such prototypes as wool fibers and human hairs, with the （3）-circle and the （9＋2）-circle fractal sets as subsets. As far as the （9＋2） topological patterns are concerned, the following propositions are proved： The （9＋2） topological patterns accurately exist, but are not unique. Their total number is 9. Among them, only two are allotropes. In other words, among the nine topological patterns, only two are independent （or fundamental）. Besides, we demonstrate that the （3, 9＋2）-circle and （9＋2, 3）-circle fractal sets are golden ones with symmetry breaking.展开更多
Chains are typically used for tension load transfer. They are very flexible and allow easy length adjustment by hooking at the links. Steel is the traditional material for chains. Recently, synthetic link chains made ...Chains are typically used for tension load transfer. They are very flexible and allow easy length adjustment by hooking at the links. Steel is the traditional material for chains. Recently, synthetic link chains made from ultra-strong polyethylene fibers, branded as Dyneema®, are commercially available. These chains offer a highly improved strength to weight ratio. So far, one type of such chains is available, and it has a Working Load Limit of 100 kN. 50 of such chains, containing 6 links were tested to fracture. The strength of each chain and the location of the failed link were documented during testing for later interpretation. Weibull statistics was applied in order to extrapolate towards the allowable load for very low failure risks (high reliability). Two approaches were used. One extrapolation was based on all results;the other was applied after recognition that the end links failed under a slight negative influence by the connection to the testing equipment. Thus, in fact two populations are mixed, the chains with failing end links and the chains with failing central links. So considering the population without the failing end links is more representative for pure chain behavior without clamping effects. The results from this latter consideration showed a higher Weibull exponent, thus a more realistic extrapolation behavior. Both methods indicate that the reliability at the working load limit of 100 kN is very good.展开更多
基金the National High Technology Research and Development Program of China(Grant No.2011AA030203)the National Natural Science Foundation of China(Grant No.61250017)the Key Research Program of the Chinese Academy Sciences(Grant No.KJZD-EW-W02)
文摘The supercontinuum （SC） generation in all-normal dispersion （ANDi） photonic-crystal fiber （PCF） pumped by high power picosecond pulses are investigated in this paper. Our results show that an octave SC may be achieved by pumping the ANDi PCF with picosecond pump pulses. However, the PCF length required may have to be lengthened to several tens of centimeters, which is much longer than that with femtosecond pump pulses. The relatively long PCF gives rise to much higher Raman gain and stronger Raman frequency shift compared to those with femtosecond pump pulses, which in turn not only cause a distorted temporal waveform and an un-flattened spectrum, but also severely degrade the coherence of the generated SC.
基金supported by the National Natural Science Foundation of China (Nos. 10572076 and10872114)the Natural Science Foundation of Jiangsu Province (No. BK2008370)
文摘Based on the concepts of fractal super fibers, the （3, 9＋2）-circle and （9＋2, 3）-circle binary fractal sets are abstracted form such prototypes as wool fibers and human hairs, with the （3）-circle and the （9＋2）-circle fractal sets as subsets. As far as the （9＋2） topological patterns are concerned, the following propositions are proved： The （9＋2） topological patterns accurately exist, but are not unique. Their total number is 9. Among them, only two are allotropes. In other words, among the nine topological patterns, only two are independent （or fundamental）. Besides, we demonstrate that the （3, 9＋2）-circle and （9＋2, 3）-circle fractal sets are golden ones with symmetry breaking.
文摘Chains are typically used for tension load transfer. They are very flexible and allow easy length adjustment by hooking at the links. Steel is the traditional material for chains. Recently, synthetic link chains made from ultra-strong polyethylene fibers, branded as Dyneema®, are commercially available. These chains offer a highly improved strength to weight ratio. So far, one type of such chains is available, and it has a Working Load Limit of 100 kN. 50 of such chains, containing 6 links were tested to fracture. The strength of each chain and the location of the failed link were documented during testing for later interpretation. Weibull statistics was applied in order to extrapolate towards the allowable load for very low failure risks (high reliability). Two approaches were used. One extrapolation was based on all results;the other was applied after recognition that the end links failed under a slight negative influence by the connection to the testing equipment. Thus, in fact two populations are mixed, the chains with failing end links and the chains with failing central links. So considering the population without the failing end links is more representative for pure chain behavior without clamping effects. The results from this latter consideration showed a higher Weibull exponent, thus a more realistic extrapolation behavior. Both methods indicate that the reliability at the working load limit of 100 kN is very good.
