The work principle of all fiber optical current transducer (AFOCT) was introduced. By analyzing the characteristic of photo-detector's output, a measurement and signal processing scheme based on sine wave modulati...The work principle of all fiber optical current transducer (AFOCT) was introduced. By analyzing the characteristic of photo-detector's output, a measurement and signal processing scheme based on sine wave modulation and demodulation was put forward for eliminating the influence of light intensity change and modulation degree change. A digital signal processing system and a calibration scheme were also advanced. The experimental data show that the mean ratio error is 0.016 74% for direct current and 0.035% for alternating current, and the correlation coefficient of linearity is up to 0.999 982 4, meeting the precision requirement of 0.2 grade. Stability experiments and temperature drift experiments show the AFOCT has a better stable capability.展开更多
A high performance current and voltage measurement system has been developed in power system. The system is composed of two parts: one current measurement element and one voltage measurement element. A Rogowski coil ...A high performance current and voltage measurement system has been developed in power system. The system is composed of two parts: one current measurement element and one voltage measurement element. A Rogowski coil and a capacitive voltage divider are used respectively for the line current and voltage measurements. Active electronic components are used to modulate signal, and power supply for these components is drawn from power line via an auxiliary current transformer. Measurement signal is transmitted by optical fibers, which is resistant to electromagnetic induction and noise. With careful design and the use of digital signal processing technology, the whole system can meet 0.5% accuracy for metering and provides large dynamic range coupled with good accuracy for protective relaying use.展开更多
为探究全光纤电流互感器(fiber optical current transformer,FOCT)调制回路故障对探测器输出信号影响,便于故障预测与故障诊断,文中首先建立包含光电回路相位延迟的正弦波调制FOCT输出信号数学模型,给出调制深度与驱动电压、二次谐波...为探究全光纤电流互感器(fiber optical current transformer,FOCT)调制回路故障对探测器输出信号影响,便于故障预测与故障诊断,文中首先建立包含光电回路相位延迟的正弦波调制FOCT输出信号数学模型,给出调制深度与驱动电压、二次谐波、四次谐波的数学关系式,分析定目标值调制器闭环调制、解调的基本方法。在此基础上通过建立数学模型分析调制深度对探测器输出光强峰值、平均光强、二次谐波、四次谐波的影响。据此提出发生调制回路故障时调制深度降低是导致探测器输出信号异常的关键因素,探测器输出平均光强增大、四次谐波降低、二次/四次谐波比值增加应作为调制回路故障的典型特征。最后开展实际FOCT模拟试验证明理论研究的有效性。展开更多
建立反射式光纤电流互感器R-FOCT(Reflecting Fiber-optic Current Transducer)的数学模型,得到描写模型的差分方程,推导出与之对应的传递函数,仿真系统的频率特性。根据电流传感器的工作特点,提出应用锁定放大器SR830测试R-FOCT频率特...建立反射式光纤电流互感器R-FOCT(Reflecting Fiber-optic Current Transducer)的数学模型,得到描写模型的差分方程,推导出与之对应的传递函数,仿真系统的频率特性。根据电流传感器的工作特点,提出应用锁定放大器SR830测试R-FOCT频率特性的方法。比较测试数据和仿真结果,结果表明,系统的带宽计算和测量方法是可信的,得到了系统带宽大于6kHz的结论。展开更多
文摘The work principle of all fiber optical current transducer (AFOCT) was introduced. By analyzing the characteristic of photo-detector's output, a measurement and signal processing scheme based on sine wave modulation and demodulation was put forward for eliminating the influence of light intensity change and modulation degree change. A digital signal processing system and a calibration scheme were also advanced. The experimental data show that the mean ratio error is 0.016 74% for direct current and 0.035% for alternating current, and the correlation coefficient of linearity is up to 0.999 982 4, meeting the precision requirement of 0.2 grade. Stability experiments and temperature drift experiments show the AFOCT has a better stable capability.
文摘A high performance current and voltage measurement system has been developed in power system. The system is composed of two parts: one current measurement element and one voltage measurement element. A Rogowski coil and a capacitive voltage divider are used respectively for the line current and voltage measurements. Active electronic components are used to modulate signal, and power supply for these components is drawn from power line via an auxiliary current transformer. Measurement signal is transmitted by optical fibers, which is resistant to electromagnetic induction and noise. With careful design and the use of digital signal processing technology, the whole system can meet 0.5% accuracy for metering and provides large dynamic range coupled with good accuracy for protective relaying use.
文摘为探究全光纤电流互感器(fiber optical current transformer,FOCT)调制回路故障对探测器输出信号影响,便于故障预测与故障诊断,文中首先建立包含光电回路相位延迟的正弦波调制FOCT输出信号数学模型,给出调制深度与驱动电压、二次谐波、四次谐波的数学关系式,分析定目标值调制器闭环调制、解调的基本方法。在此基础上通过建立数学模型分析调制深度对探测器输出光强峰值、平均光强、二次谐波、四次谐波的影响。据此提出发生调制回路故障时调制深度降低是导致探测器输出信号异常的关键因素,探测器输出平均光强增大、四次谐波降低、二次/四次谐波比值增加应作为调制回路故障的典型特征。最后开展实际FOCT模拟试验证明理论研究的有效性。
文摘建立反射式光纤电流互感器R-FOCT(Reflecting Fiber-optic Current Transducer)的数学模型,得到描写模型的差分方程,推导出与之对应的传递函数,仿真系统的频率特性。根据电流传感器的工作特点,提出应用锁定放大器SR830测试R-FOCT频率特性的方法。比较测试数据和仿真结果,结果表明,系统的带宽计算和测量方法是可信的,得到了系统带宽大于6kHz的结论。
