Multiscale Study on Low Temperature Crack Resistance Mechanism of Steel Slag Asphalt Mixture

The objective of this paper was to study low temperature crack resistance mechanism of steel slag asphalt mixture(SAM).Thermal stress restrained specimen test(TSRST)and three-point bending test were carried out to evaluate the low-temperature crack resistance of SAM and basalt asphalt mixture(BAM).Based on the digital image correlation technique(DIC),the strain field distribution and crack propagation of SAM were analyzed from the microscopic point of view,and a new index,crack length factor(C),was proposed to evaluate the crack resistance of the asphalt mixture.The crystal phase composition and microstructure of steel slag aggregate(SA)and basalt aggregate(BA)were studied by X-ray diffraction(XRD)and scanning electron microscopy(SEM)to explore the low-temperature crack resistance mechanism of SAM.Results show that the low-temperature crack resistance of SAM is better than that of BAM;SAM has good integrity and persistent elastic deformation,and its bending failure mode is a hysteretic quasi-brittle failure;The SA surface is evenly distributed with pores and has surface roughness.SA has the composition phase of alkaline aggregate-calcite(CaCO3),so it has good adhesion to asphalt,which reveals the mechanism of excellent low-temperature crack resistance of SAM.

Long-term performance of recycled asphalt mixtures containing high RAP and RAS

The application of reclaimed asphalt pavement(RAP)and reclaimed asphalt shingles(RAS)on asphalt pavement can reduce the asphalt paving cost,conserve energy and protect the environment.However,the use of high contents of RAP and RAS in asphalt pavement may lead to durability issues,especially the fatigue cracking and thermal cracking.It is necessary to conduct a series of analyses on asphalt mixtures containing high RAP and RAS,and seek methods to enhance their long-term performance.This paper provides a comprehensive over-view of the long-term performance of recycled asphalt mixtures containing high contents of RAP and RAS.The findings in this research show that rutting resistance of high recycled asphalt mixtures is not a concern,whereas their resistance to fatigue and thermal cracking is not conclusive.Recycling agents can be used to improve the thermal cracking resistance of high recycled asphalt mixtures.An optimum decision on recycling agents will improve the durability properties of high recycled asphalt mixtures.It is recommended that to use a balanced mixture design approach with testing of the blended asphalt binders will provide better understanding of long-term performance of recycled asphalt mixtures containing high RAP and RAS.

Bamboo Fiber Modified Asphalt Mixture Proportion Design and Road Performances Based on Response Surface Method

In order to comprehensively utilize the remaining bamboo residue of bamboo products,this paper presents a research on recycling the bamboo fibers from bamboo residue for improving the performance of the asphalt mixtures.First of all,the basic performance parameters of sinocalamus affinis fiber,phyllostachys pubescens fiber,green bamboo fiber were tested and analyzed,and the optimal content and length were put forward.Then,the mix ratio design of the bamboo fiber modified asphalt mixture was further designed through the response surface method,and was verified the rationality of the mix ratio.Finally,the mixture specimens were made according to the experimental design mix ratio,and the high temperature,low temperature performance and moisture susceptibility of the bamboo fiber modified mixtures asphalt were tested.The results showed that the high temperature performance,low temperature performance and moisture susceptibility of bamboo fiber modified asphalt mixtures were improved compared with the performance of SBS modified asphalt mixture.When the length of bamboo fiber is 7.25 mm and the content of 0.22%,the road performance of the asphalt mixture was optimal.Consequentially,the decomposition of bamboo residue into bamboo fiber and its application in asphalt pavement can improve the reuse of bamboo waste,with remarkable environmental benefits and great promotion value.

Influence of Hydrodynamic Pore Pressure Damage on the Performance of Hot-Mixed Renewable Asphalt Mixture

For evaluating the water stability of hot-mixed renewable asphalt mixture(HRM),the traditional methods are all tested under still water conditions.Except for damage in still water conditions,the hydrodynamic pore pressure generated by the tire driving on the surface water has a great impact.Thus,the RAP contents of the HRMs were designed at 0%,30%,45%and 60%with AC-25 gradation.Then,the self-designed evaluation methods of water stability and dynamic modulus were studied.Finally,the mechanism of the influence of hydrodynamic pore pressure damage on HRMs was studied.The results show that the water stability of HRM containing 30%RAP is equivalent to that of 45%RAP,and the water stability of HRM containing 60%RAP decreases significantly.The Contabro test after MIST treatment can be used as an evaluation method for hydrodynamic pore pressure damage on HRM.Low-speed,heavy-load traffic and larger RAP content have greater damage to the mixture after hydrodynamic pore pressure damage.The performance differences between the aged bitumen and pure bitumen,as well as the aged minerals and new minerals,are continuing to be enlarged in hydrodynamic pore pressure conditions,finally affecting the water stability and dynamic modulus of the HRMs.

Analytical Study on the Effect of Electric Arc Furnace Dust(EAFD)on the Rutting of Asphalt Concrete Mixtures

As a byproduct of the steelmaking process,significant amounts of hazardous electric arc furnace dust(EAFD)are produced.Utilizing the solidification/stabilization technology with asphalt mix is one way to safeguard the environment from its negative effects.Rutting was used as an indicator to assess the asphalt mixture with EAFD since it is an important factor in pavement design.This study’s major goal is to ascertain how EAFD affects the rutting of asphalt-concrete mixtures.To evaluate the ideal asphalt content,the Marshall test method was applied to asphalt-concrete mixtures.EAFD was added to the asphalt cement in four different volume percentages as a binder addition.Then,using the Universal Testing Machine,participants were exposed to a replica of the rutting test(UTM).Experiments were conducted at 25℃,40℃ and 55℃,and at frequencies of 1 Hz,4 Hz and 8 Hz.Rutting was measured for each specimen.Test results showed that rut depth has a negative correlation with EAFD%and a positive correlation with temperature.The use of EAFD has dual advantages,protecting the environment from the adverse impact of EAFD and reducing the cost of asphalt mix without jeopardizing pavement performance.

Normalized fatigue properties of asphalt mixture at various temperatures

This study normalized the mixture's fatigue behavior at various temperatures,and the strength and fatigue tests of the mixture were conducted.The stress state of the asphalt mixture includes direct tensile,uniaxial compression,and indirect tensile.The Desai yield surface and fatigue path were proposed.And a normalized fatigue characteristics model of the mixture was established.The following conclusions were obtained.With the increases in the loading rate,the strength of the asphalt mixture increased.As the temperature increases,the strength of the mixture is reduced.At various temperatures and rates,the strength forms a closed curved surface.The Desai strength yield surface was established,which forms a closed curved surface.When the loading rate and temperature are below a certain critical line,the asphalt mixture will not undergo strength damage.At a fixed stress state,the fatigue damage path of the mixture was determined.The stress ratio was determined considering the influence of the loading rate.In this way,a normalized model can be described to express the asphalt mixture fatigue properties at various temperatures and stress levels.For the asphalt mixture in an indirect tensile state,the normalized fatigue equation parameter is 4.09.This model is more suitable for reflecting the viscous-elastic behavior of the mixtures than the fatigue equation determined by the notional stress ratio.

A review on evaluation of crack resistance of asphalt mixture by semi-circular bending test

Although there are many kinds of fracture tests to choose from in evaluating the crack resistance of asphalt mixture,the semi-circular bending(SCB)test has attracted a lot of attention in the academic road engineering community because of its simplicity,stability,and flexibility in testing and evaluation.The SCB test has become a common method to study the cracking resistance of asphalt mixture in recent years.This paper mainly summarizes the overview of the SCB test,summarizes some research results and common characterization parameters of the SCB test method in monotone test and fatigue test in recent years,and predicts and suggests the research direction of the SCB test in the future.It is found that the research on the monotonic SCB test is more comprehensive,and the research on the SCB fatigue test needs to be further improved in the aspects of loading mode,characterization parameter selection,and so on.Researchers can flexibly adjust the geometric dimensions and the test parameters of semi-cylindrical specimens,and conduct comprehensive analysis combined with the results of numerical simulation.The crack resistance of asphalt mixture can be comprehensively evaluated by fracture energy,fracture toughness,stiffness,flexibility index and other fracture indicators,combined with the crack propagation of the specimen.The analysis of numerical simulation can confirm the test results.In order to standardize the setting of fatigue parameters for future application,it is necessary to standardize the setting of bending performance.

Effects of Aggregate Size and Specimen Scale on Asphalt Mixture Cracking Using a Micromechanical Simulation Approach

A micromechanical model based on discrete element method(DEM) was employed to investigate the effects of aggregate size and specimen scale on the cracking behavior of asphalt mixture. An algorithm for generating three-dimensional aggregates that can reflect the realistic geometry such as shape, size and fracture surface of aggregate particles was developed using a user-defined procedure coded with FISH language in particle flow code in three-dimensions(PFC3 D). The parallel-bond model(PBM), linear contact model(LCM), and slip model(SM), whose sets of micro parameters were obtained by comparing experimental tests with numerical simulation results, were used to characterize the internal contact behavior of asphalt mixture. Digital asphalt mixture specimens were used to simulate the effects of aggregate size and specimen scale on the cracking behavior by the indirect tensile(IDT) test. Some conclusions can be drawn as follows: Both cracks and IDT strength decrease with increasing aggregate size. However, the heterogeneity of contact-force distribution augments with increasing aggregate size, especially with 13.2-16 mm aggregate. The aggregate size of 4.75-9.5 mm dominates in forming skeleton structure for asphalt mixture. The IDT strength decreases and cracks augment with increasing sample scale. The crack growth can be well interpreted from the perspective of energy analysis. The conclusions show that the proposed micromechanical model is suitable for the simulation of crack propagation. This study provides an assistant tool to further study the cracking behavior of particle-reinforced composites material such as asphalt mixture and Portland cement concrete.

Simulation of rheological behavior of asphalt mixture with lattice model

A three-dimensional(3D) lattice model for predicting the rheological behavior of asphalt mixtures was presented.In this model asphalt mixtures were described as a two-phase composite material consisting of asphalt sand and coarse aggregates distributed randomly.Asphalt sand was regarded as a viscoelastic material and aggregates as an elastic material.The rheological response of asphalt mixture subjected to different constant stresses was simulated.The calibrated overall creep strain shows a good approximation to experimental results.

Effect of aggregate gradation on low temperature performance of asphalt paving mixtures

Low temperature cracking has become one of the important factors that diminish asphalt pavement's ride quality and service life.Especially in cold region,cracking caused by low temperature is the main distress form.This paper discussed the effect of aggregate gradation on the low temperature performance in asphalt paving mixtures.A total of 11 asphalt mixtures with 11 different aggregate gradations and one asphalt binder content were studied.Volumetric properties of the coarse aggregate and asphalt mixtures showed aggregate grading has a significant impact on the degree of aggregate interlock in asphalt mixtures.A trend is existed in the low temperature performance with the change of gradation.With the aid of mathematic statistics,it indicates gradation affects the low temperature performance significantly.The findings also indicate the relationship between the degree of aggregate interlock in asphalt mixtures and the low temperature performance:With the stone-to-stone contact developed,the mixture has a high energy to resist contract and deformation at low temperature.The properties of fine aggregate and asphalt play an important part in resisting low temperature cracking in floating structure.But it provides lower energy to resist low temperature cracking compared to the skeleton structure.

Design Method and Performance for Large Stone Porous Asphalt Mixtures

Design method for large stone porous asphalt mixtures (LSPM) was analyzed to avoid the early distresses of semi-rigid asphalt pavements. Based on stone-to-stone skeleton structure concept, processes of LSPM gradation design was given. The gradation composite design for LSPM shows that the LSPM nominal maximum size ( N MS) should be larger than 26.5 mm, and the NMS sieve passing percentage should be greater than 50%. Through experiments and calculations on the volume properties of the aggregate, the range of aggregate gradation curve of LSPM was given. In terms of asphalt binder's normalized test results, MAC-70 and SBS modified asphalt were selected as the asphalt binders. The applicability of large scale Marshall Method and gyratory compaction method to shape specimens was investigated. Based on the asphalt mixture performance evaluation, the optimum asphalt content range (3.1%-3.6%), the bitumen film's thickness range (13-16 μm) and the air void range (13%-18 %) were recommended. Finally, LSPM was tested by the laboratory performance tests including rutting resistance test, fatigue test and water stability test. The theoretic and practical analysis shows that LSPM has a good performance on water permeability, rutting resistance and reflection crack resistance.

High-Temperature Deformation and Low-Temperature Fracture Behavior of Steel Slag Rubber Asphalt Mixture Surface Layer

Steel slag is regarded as one of the most widespread solid by-products of steel smelting with little commercial value.It can play a vital role in the construction industry especially in the field of transportation infrastructure construction.However,there are few evaluation systems established on the high-temperature deformation and low-temperature fracture behavior of steel slag rubber asphalt mixture(SSRAM).This study explores the perfor-mance of SSRAM by uniaxial penetration test,Semi-Circular Bending(SCB)test and evaluates test data through regression analysis.The uniaxial penetration test results shows that the failure deformation of SSRAM increases with the increase of steel slag content.According to the minimum allowable permanent deformation(R TS-min),the deformation of SSRAM should be controlled within 3 mm.Meanwhile,the cracking index of the SSRAM surface layer calculated at low temperature can meet the design requirements.The SCB test results show that the stress peak degradation rate(specimens with 10 mm notch are compared with 0 mm)of SSRAM with 40%steel slag content is 20.04%.That means proper steel slag content makes the stress peak degradation rate of SSRAM reaches the lowest value.The calculation results of fracture energy density(J_(1C))show that the steel slag additive reduced the fracture energy density of SSRAM.However,it is still proved that SSRAM with 40%steel slag has the best low-temperature fracture performance based on critical fracture toughness(K_(1C))and fracture stress peak.Further-more,the crack propagation velocity parametric equation of SSRAM is proposed through fracture mechanics theory and the increase of velocity is exponential.Considering the high-temperature deformation resistance and low-temperature fracture property,the SSRAM surface layer with 40%steel slag content showed a batter application potential.

Numerical simulation of asphalt mixture based on three-dimensional heterogeneous specimen

In order to verify the validity of finite element numerical simulation method for asphalt mixture, which consists of aggregates, mastic (where mastic is a kind of fine mixture composed of asphalt binder mixed with fines and fine aggregates) and air voids, based on three-dimensional (3D) heterogeneous specimen, X-ray computerized tomography (X-ray CT) was used to scan the asphalt specimens to obtain the real internal microstructures of asphalt mixture. CT images were reconstructed to build up 3D digital specimen, and the viscoelastic properties of mastic were described with Burgers model. The uniaxial creep numerical simulations of three different levels of aggregate gradation were conducted. The simulation results agree well with the experimental results. The numerical simulation of asphalt mixture incorporated with real 3D microstructure based on finite element method is a promising application to conduct research of asphalt concrete. Additionally, this method can increase the mechanistic understanding of global viscoelastic properties of asphalt mixtures by linking the real 3D microstructure.

Fracture properties of epoxy asphalt mixture based on extended finite element method

Crack is found to be a major distress that affects the performance of the epoxy asphalt pavement.An extended finite element method was proposed for investigating the fracture properties of the epoxy asphalt mixture.Firstly,the single-edge notched beam test was used to analyze the temperature effect and calculate the material parameters.Then,the mechanical responses were studied using numerical analysis.It is concluded that 5℃ can be selected as the critical temperature that affects the fracture properties,and numerical simulations indicate that crack propagation is found to significantly affect the stress state of the epoxy asphalt mixture.The maximum principal stress at the crack surface exhibits different trends at various temperatures.Numerical solution of stress intensity factor can well meet the theoretical solution,especially when the temperature is lower than 5℃.

Permanent deformation response parameters of asphalt mixtures for a new mix-confined repeated load test

The main objective of this work is to propose new mixture response parameters and to compare correlations with rut depths and sensitivity of permanent deformation response parameters based on field extracted cores and lab-mixed duplicates. A new "mix-confined" test is developed and four new parameters for this test are proposed. Correlation coefficients with rut depths and coefficients of variation (sensitivity) are compared between the four new and two existing parameters. Some parameters are recommended to be used for the newly developed test. The results show that, newly developed test can capture the changes of permanent deformation of asphalt mixtures. Only one new parameter (D1 of Stephen Price model) and one existing parameter (flow number, Fn ) have strong correlations with rut depths of asphalt pavements (R2 greater than 0.7) and have relative small sensitivity (coefficient of variation, COV, less than 30%). For polymer modified asphalt mixtures, the parameter D1 rather than Fn should be used. These findings can be used to check the permanent deformation of asphalt mixture during the mix design.

Effects of Temperature on the Dynamic Properties of Asphalt Mixtures

By using the falling weight deflectometer(FWD),the dynamic loading tests on different thickness of asphalt mixture pavement in different temperature were performed.The experimental results show that the effects of temperature on dynamic properties of asphalt mixture are significant,and the thickness of asphalt mixture is also another important influence factor.The comparisons indicate that effect of temperature on the behaviors of dynamic loading properties and static loading properties of asphalt mixture were quite different.

Effect of Loading Condition and Temperature on Dynamic Properties of Asphalt Mixtures

In order to study the effects of loading condition and temperature on the dynamic properties of asphalt mixtures, the dynamic loading tests on different loading condition (various speeds and loads under a certain roughness) and temperature conditions were performed. The experimental result show that the dynamic properties of asphalt mixtures are influenced by vehicle load and speed, besides, the effects of temperature on dynamic properties of asphalt mixture are significant.

Microstructure modeling and virtual test of asphalt mixture based on three-dimensional discrete element method

The objective of this work is to model the microstructure of asphalt mixture and build virtual test for asphalt mixture by using Particle Flow Code in three dimensions(PFC^(3D))based on three-dimensional discrete element method.A randomly generating algorithm was proposed to capture the three-dimensional irregular shape of coarse aggregate.And then,modeling algorithm and method for graded aggregates were built.Based on the combination of modeling of coarse aggregates,asphalt mastic and air voids,three-dimensional virtual sample of asphalt mixture was modeled by using PFC^(3D).Virtual tests for penetration test of aggregate and uniaxial creep test of asphalt mixture were built and conducted by using PFC^(3D).By comparison of the testing results between virtual tests and actual laboratory tests,the validity of the microstructure modeling and virtual test built in this study was verified.Additionally,compared with laboratory test,the virtual test is easier to conduct and has less variability.It is proved that microstructure modeling and virtual test based on three-dimensional discrete element method is a promising way to conduct research of asphalt mixture.

Fatigue Property of Basalt Fiber-Modified Asphalt Mixture under Complicated Environment

The fatigue property of asphalt mixtures under complicated environment(low-temperature bending performance, chloride penetration, freezing-thawing cycle and their coupling effect) and the improvement effect for relevant property of basalt fiber-reinforcing asphalt mixture under complicated environment are studied. Two grading types of asphalt mixtures, AC-16 I and AC-13 I, are chosen, whose optimum asphalt-aggregate ratio and optimum dosage of basalt fiber are determined by the Marshall test. The standard specimens are made firstly, and then the low temperature bending tests of asphalt mixture and basalt fiber-reinforced asphalt mixture under the coupling effect of the chloride erosion and freezing-thawing cycle have been carried out. Finally, the fatigue property tests of asphalt mixture and basalt fiber-reinforced asphalt mixture under complex environment are performed on MTS material testing system. The results indicate that the tensile strength, the maximum curving tensile stress, the curving stiffness modulus, and fatigue properties of asphalt mixture are infl uenced by the coupling effect of the chloride erosion and freezing-thawing cycle. The low-temperature bending performance and fatigue property of asphalt mixtures under complicated environment can be greatly improved by adding moderate basalt fiber. The dense gradation asphalt mixture possesses stronger ability to resist adverse environmental effects under the same condition.