Finite element method is used to simulate the high-speed melt spinning process, based on the equation system proposed by Doufas et al. Calculation predicts a neck-like deformation, as well as the related profiles of v...Finite element method is used to simulate the high-speed melt spinning process, based on the equation system proposed by Doufas et al. Calculation predicts a neck-like deformation, as well as the related profiles of velocity, diameter, temperature, chain orientation, and crystallinity in the fiber spinning process. Considering combined effects on the process such as flow-induced crystallization, viscoelasticity, filament cooling, air drag, inertia, surface tension and gravity, the simulated material flow behaviors are consistent with those observed for semi-crystalline polymers under various spinning conditions, The structure change of polymer coils in the necking region described by the evolution of conformation tensor is also investigated. Based on the relaxation mechanism of macromolecules in flow field different types of morphology change of polymer chains before and in the neck are proposed, giving a complete prospect of structure evolution and crystallization of semi-crystalline polymer in the high speed fiber spinning process.展开更多
In this paper,glass fibers were prepared by centrifugal-spinneret-blow(CSB) process.The molten glass got different flow rate from 390 kg/h to 270 kg/h by adjusting the electric current of platinum/10 rhodium alloy bus...In this paper,glass fibers were prepared by centrifugal-spinneret-blow(CSB) process.The molten glass got different flow rate from 390 kg/h to 270 kg/h by adjusting the electric current of platinum/10 rhodium alloy bushing.The diameter and microstructure of glass fibers have been investigated by scanning electron microscopy(SEM) and vertical optical microscope(VOM).The results indicated that the flow rate of molten glass was proportional to the diameter of glass fibers when the molten glass got main flow rate of 330 kg/h.The lower the flow rate was,the finer the average diameter was.展开更多
The influence of modern heat insulation materials on the ecological compatibility and fire resistance of residential and public buildings is considered. The nomenclature of fibrous heat insulation materials from basic...The influence of modern heat insulation materials on the ecological compatibility and fire resistance of residential and public buildings is considered. The nomenclature of fibrous heat insulation materials from basic rocks of volcanic origin is described. For basalt super thin fibers (BSTF), the production technology is described. The factors negatively influencing the engineering-and-economical performance of the duplex technology of production of the BSTF are analyzed. The engineering-and-economical performance of innovative enterprises for the production of basalt heat insulation and measures for its use in construction are given.展开更多
A Yb-doped silica glass fiber laser with a core made by sol-gel method is reported. The maximum power of 1.14 W is obtained with a pump power of 5.46 W at a wavelength of 976 nm. The slope efficiency is 34%. The refra...A Yb-doped silica glass fiber laser with a core made by sol-gel method is reported. The maximum power of 1.14 W is obtained with a pump power of 5.46 W at a wavelength of 976 nm. The slope efficiency is 34%. The refractive index fluctuation across the core is below 5×10^-4 at a doping level of Yb 0.15 mol%, A203 4.0 mol%, and P2O5 2.0 mol%. High background attenuation of 6 dB/m at 1 053 nm limites the slope efficiency and maximum output power.展开更多
High modulus low shrinkage (HMLS) fibers have been prepared by using higher viscosity PET chips. The effects of the process conditions on their structure and properties have been studied by various testing techniques....High modulus low shrinkage (HMLS) fibers have been prepared by using higher viscosity PET chips. The effects of the process conditions on their structure and properties have been studied by various testing techniques. The results show that the suitable spinning speed for preparing of HMLS fibers is 2 000 ～ 2 800 m/min. With the increase of the spinning speed, the density, crystallinity, and birefringence of the initial fibers increase obviously, but the shrinkage ratio decreases rapidly. The effects of process technology on properties of the HMLS fibers have also been discussed.展开更多
Calcium alginate fibers were prepared by wet spinning of sodium alginate into a coagulating bath containing calcium chloride.The thermal degradation and flame retardancy of calcium alginate fibers were investigated wi...Calcium alginate fibers were prepared by wet spinning of sodium alginate into a coagulating bath containing calcium chloride.The thermal degradation and flame retardancy of calcium alginate fibers were investigated with thermal gravimetry(TG),X-ray diffraction(XRD),limiting oxygen index(LOI) and cone calorimeter(CONE).The results show that calcium alginate fibers are inherently flame retardant with a LOI value of 34,and the heat release rate(HRR),total heat release(THR),CO and CO_2 concentrations during com...展开更多
The flow and heat transfer of the basalt melt in the boundary layer on a flat plate is considered. The conditions of formation of the layer and the intensity of heat transfer are determined. A self-similar analysis us...The flow and heat transfer of the basalt melt in the boundary layer on a flat plate is considered. The conditions of formation of the layer and the intensity of heat transfer are determined. A self-similar analysis using the symmetry method was used. A system of ordinary differential equations in self-similar form is obtained. The fluid flow and heat transfer of molten basalt at a laminar steady-state flow in the feeder furnaces are numerically researched. The term “protective layer” on the interface “basalt melt-lining” is introduced. The dependences for the calculation of dimensionless shear stresses and the Nusselt number on the lining surface are obtained. The conditions of rational organization of the technological process of basalt melt feeding in the furnace feeder are formulated.展开更多
基金This work was financially supported by the National Natural Science Foundation of China(Nos.20204007,50390090,20490220,10590355)the Doctoral Foundation of National Education Committee of China(No.20030248008)the 863 Project of China(No.2002AA336120).
文摘Finite element method is used to simulate the high-speed melt spinning process, based on the equation system proposed by Doufas et al. Calculation predicts a neck-like deformation, as well as the related profiles of velocity, diameter, temperature, chain orientation, and crystallinity in the fiber spinning process. Considering combined effects on the process such as flow-induced crystallization, viscoelasticity, filament cooling, air drag, inertia, surface tension and gravity, the simulated material flow behaviors are consistent with those observed for semi-crystalline polymers under various spinning conditions, The structure change of polymer coils in the necking region described by the evolution of conformation tensor is also investigated. Based on the relaxation mechanism of macromolecules in flow field different types of morphology change of polymer chains before and in the neck are proposed, giving a complete prospect of structure evolution and crystallization of semi-crystalline polymer in the high speed fiber spinning process.
文摘In this paper,glass fibers were prepared by centrifugal-spinneret-blow(CSB) process.The molten glass got different flow rate from 390 kg/h to 270 kg/h by adjusting the electric current of platinum/10 rhodium alloy bushing.The diameter and microstructure of glass fibers have been investigated by scanning electron microscopy(SEM) and vertical optical microscope(VOM).The results indicated that the flow rate of molten glass was proportional to the diameter of glass fibers when the molten glass got main flow rate of 330 kg/h.The lower the flow rate was,the finer the average diameter was.
文摘The influence of modern heat insulation materials on the ecological compatibility and fire resistance of residential and public buildings is considered. The nomenclature of fibrous heat insulation materials from basic rocks of volcanic origin is described. For basalt super thin fibers (BSTF), the production technology is described. The factors negatively influencing the engineering-and-economical performance of the duplex technology of production of the BSTF are analyzed. The engineering-and-economical performance of innovative enterprises for the production of basalt heat insulation and measures for its use in construction are given.
文摘A Yb-doped silica glass fiber laser with a core made by sol-gel method is reported. The maximum power of 1.14 W is obtained with a pump power of 5.46 W at a wavelength of 976 nm. The slope efficiency is 34%. The refractive index fluctuation across the core is below 5×10^-4 at a doping level of Yb 0.15 mol%, A203 4.0 mol%, and P2O5 2.0 mol%. High background attenuation of 6 dB/m at 1 053 nm limites the slope efficiency and maximum output power.
文摘High modulus low shrinkage (HMLS) fibers have been prepared by using higher viscosity PET chips. The effects of the process conditions on their structure and properties have been studied by various testing techniques. The results show that the suitable spinning speed for preparing of HMLS fibers is 2 000 ～ 2 800 m/min. With the increase of the spinning speed, the density, crystallinity, and birefringence of the initial fibers increase obviously, but the shrinkage ratio decreases rapidly. The effects of process technology on properties of the HMLS fibers have also been discussed.
基金supported by the Special Program for Key Basic Research of the Ministry of Science and Technology of China(No.2006CB708603)the National Natural Science Foundation of China(No.50673046)Shandong Natural Science Foundation(No.Q2008B04)
文摘Calcium alginate fibers were prepared by wet spinning of sodium alginate into a coagulating bath containing calcium chloride.The thermal degradation and flame retardancy of calcium alginate fibers were investigated with thermal gravimetry(TG),X-ray diffraction(XRD),limiting oxygen index(LOI) and cone calorimeter(CONE).The results show that calcium alginate fibers are inherently flame retardant with a LOI value of 34,and the heat release rate(HRR),total heat release(THR),CO and CO_2 concentrations during com...
文摘The flow and heat transfer of the basalt melt in the boundary layer on a flat plate is considered. The conditions of formation of the layer and the intensity of heat transfer are determined. A self-similar analysis using the symmetry method was used. A system of ordinary differential equations in self-similar form is obtained. The fluid flow and heat transfer of molten basalt at a laminar steady-state flow in the feeder furnaces are numerically researched. The term “protective layer” on the interface “basalt melt-lining” is introduced. The dependences for the calculation of dimensionless shear stresses and the Nusselt number on the lining surface are obtained. The conditions of rational organization of the technological process of basalt melt feeding in the furnace feeder are formulated.
