After current zero,which is the moment when the vacuum circuit breaker interrupts a vacuum arc,sheath development is the first process in the dielectric recovery process.An axial magnetic field（AMF） is widely used i...After current zero,which is the moment when the vacuum circuit breaker interrupts a vacuum arc,sheath development is the first process in the dielectric recovery process.An axial magnetic field（AMF） is widely used in the vacuum circuit breaker when the high-current vacuum arc is interrupted.Therefore,it is very important to study the influence of different AMF amplitudes on the sheath development.The objective of this paper is to study the influence of different AMF amplitudes on the sheath development from a micro perspective.Thus,the particle in cell-Monte Carlo collisions（PIC-MCC） method was adopted to develop the sheath development model.We compared the simulation results with the experimental results and then validated the simulation.We also obtained the speed of the sheath development and the energy density of the ions under different AMF amplitudes.The results showed mat the larger the AMF amplitudes are,the faster the sheath develops and the lower the ion energy density is,meaning the breakdown is correspondingly more difficult.展开更多
The critical electric fields of hot SF6 are calculated including both electron and ion kinetics in wide ranges of temperature and pressure, namely from 300 K up to 4000 K and 2 atmospheres up to 32 atmospheres respect...The critical electric fields of hot SF6 are calculated including both electron and ion kinetics in wide ranges of temperature and pressure, namely from 300 K up to 4000 K and 2 atmospheres up to 32 atmospheres respectively. Based on solving a multi-term electron Boltz- mann equation the calculations use improved electron-gas collision cross sections for twelve SF6 dissociation products with a particular emphasis on the electron-vibrating molecule interactions. The ion kinetics is also considered and its role on the critical field becomes non negligible as the temperature is above 2000 K. These critical fields are then used in hydrodynamics simulations which correctly predict the circuit breaker behaviours observed in the case of breaking tests.展开更多
A 3D Magnetohydrodynamics （MHD） arc model in conjunction with an arc move- ment model is applied to simulate the arc rotation as well as to solve its effect on the pressure in an auto-expansion circuit breaker. The ...A 3D Magnetohydrodynamics （MHD） arc model in conjunction with an arc move- ment model is applied to simulate the arc rotation as well as to solve its effect on the pressure in an auto-expansion circuit breaker. The rotation of the arc driven by an external electromagnetic force is simulated in the case with 200 kA of the short circuit current and 16 ms of arc duration. The arc rotating process and the speed of arc rotation have been obtained in the simulation. A comparison of the pressure in the expansion volume with and without an external magnetic field has been carried out based on the calculation results of two cases. The results of the simulation reveal that the arc rotation, which causes more energy exchange between the arc and its sur- rounding gas, can evidently bring about the pressurization in the expansion volume, which would contribute to more effective arc quenching at current zero and further reducing operation power.展开更多
研究了寄生电感对基于常通型碳化硅(silicon carbide,SiC)结型场效应晶体管(junction field effect transistor,JFET)串联结构的中压直流固态断路器(solid state circuit breaker,SSCB)过电压的影响,并在此基础上提出了一种SSCB的过电...研究了寄生电感对基于常通型碳化硅(silicon carbide,SiC)结型场效应晶体管(junction field effect transistor,JFET)串联结构的中压直流固态断路器(solid state circuit breaker,SSCB)过电压的影响,并在此基础上提出了一种SSCB的过电压抑制方法。首先介绍了基于常通型SiC JFET器件串联结构的SSCB拓扑及工作原理,建立了考虑完整回路寄生电感的SiC JFET串联结构开关过程的数学模型。其次利用MATLAB软件对数学模型进行解析计算,揭示了SSCB开关过程中寄生电感对SiC JFET器件串联运行时过电压的影响机理,并利用PSPICE仿真结果验证了理论分析的正确性。最后设计了一种适用于SSCB过电压抑制的单栅极驱动及缓冲电路,并通过SSCB实验样机验证了所提方法的有效性。展开更多
With the continuous improvement of current levels in power systems, the demands on the breaking capacity requirements of vacuum circuit breakers are getting higher and higher. The breaking capacity of vacuum breakers ...With the continuous improvement of current levels in power systems, the demands on the breaking capacity requirements of vacuum circuit breakers are getting higher and higher. The breaking capacity of vacuum breakers is determined by cathode spots, which provide electrons and metal vapor to maintain the arc. In this paper, experiments were carried out on two kinds of transverse magnetic field（TMF） contacts in a demountable vacuum chamber, the behavior of the cathode spots was recorded by a high-speed charge-coupled device（CCD） video camera, and the characteristics of the cathode spots were analyzed through the image processing method. The phenomenon of cathode spot groups and the star-shaped pattern of the spots were both discovered in the experiment. The experimental results show that with the condition of TMF contacts the initial expansion speed of cathode spots is influenced by some parameters, such as the tested current, contact gap, the structure of the contact, the contact diameter, the number of slots, etc. In addition, the influence of the magnetic field on the formation of the cathode spot groups, the distribution, and the dynamic characteristics of the cathode spots were analyzed. It is concluded that the characteristics of the cathode spots are due to the effect of the magnetic field on the near-cathode plasma. The study of the characteristics of cathode spots in this paper would be helpful in the exploration of the physical process of vacuum arcs, and would be of guiding significance in optimizing the design of vacuum circuit breakers.展开更多
基金supported by the National Key Basic Research Program of China(973 Program) 2015CB251002National Natural Science Foundation of China under Grant 51521065, 51577145,51377128,51323012,51607135+3 种基金Program of State Grid Electrical Power Research Institute GY71-14-004the Science and Technology Project Funds of the Grid State Corporation(Medium voltage DC distribution protection) (SGSNKYOOKJJS1501564)the Science and Technology Project Funds of Hubei Electric Power Company(SGRIZLKJ (2016)325)State Key Laboratory of Electrical Insulation and Power Equipment(EIPE17305)
文摘After current zero,which is the moment when the vacuum circuit breaker interrupts a vacuum arc,sheath development is the first process in the dielectric recovery process.An axial magnetic field（AMF） is widely used in the vacuum circuit breaker when the high-current vacuum arc is interrupted.Therefore,it is very important to study the influence of different AMF amplitudes on the sheath development.The objective of this paper is to study the influence of different AMF amplitudes on the sheath development from a micro perspective.Thus,the particle in cell-Monte Carlo collisions（PIC-MCC） method was adopted to develop the sheath development model.We compared the simulation results with the experimental results and then validated the simulation.We also obtained the speed of the sheath development and the energy density of the ions under different AMF amplitudes.The results showed mat the larger the AMF amplitudes are,the faster the sheath develops and the lower the ion energy density is,meaning the breakdown is correspondingly more difficult.
文摘The critical electric fields of hot SF6 are calculated including both electron and ion kinetics in wide ranges of temperature and pressure, namely from 300 K up to 4000 K and 2 atmospheres up to 32 atmospheres respectively. Based on solving a multi-term electron Boltz- mann equation the calculations use improved electron-gas collision cross sections for twelve SF6 dissociation products with a particular emphasis on the electron-vibrating molecule interactions. The ion kinetics is also considered and its role on the critical field becomes non negligible as the temperature is above 2000 K. These critical fields are then used in hydrodynamics simulations which correctly predict the circuit breaker behaviours observed in the case of breaking tests.
基金supported by National Natural Science Foundation of China (Nos.51177005 and 51477004)
文摘A 3D Magnetohydrodynamics （MHD） arc model in conjunction with an arc move- ment model is applied to simulate the arc rotation as well as to solve its effect on the pressure in an auto-expansion circuit breaker. The rotation of the arc driven by an external electromagnetic force is simulated in the case with 200 kA of the short circuit current and 16 ms of arc duration. The arc rotating process and the speed of arc rotation have been obtained in the simulation. A comparison of the pressure in the expansion volume with and without an external magnetic field has been carried out based on the calculation results of two cases. The results of the simulation reveal that the arc rotation, which causes more energy exchange between the arc and its sur- rounding gas, can evidently bring about the pressurization in the expansion volume, which would contribute to more effective arc quenching at current zero and further reducing operation power.
基金supported by National Natural Science Foundation of China(No.51777153)
文摘With the continuous improvement of current levels in power systems, the demands on the breaking capacity requirements of vacuum circuit breakers are getting higher and higher. The breaking capacity of vacuum breakers is determined by cathode spots, which provide electrons and metal vapor to maintain the arc. In this paper, experiments were carried out on two kinds of transverse magnetic field（TMF） contacts in a demountable vacuum chamber, the behavior of the cathode spots was recorded by a high-speed charge-coupled device（CCD） video camera, and the characteristics of the cathode spots were analyzed through the image processing method. The phenomenon of cathode spot groups and the star-shaped pattern of the spots were both discovered in the experiment. The experimental results show that with the condition of TMF contacts the initial expansion speed of cathode spots is influenced by some parameters, such as the tested current, contact gap, the structure of the contact, the contact diameter, the number of slots, etc. In addition, the influence of the magnetic field on the formation of the cathode spot groups, the distribution, and the dynamic characteristics of the cathode spots were analyzed. It is concluded that the characteristics of the cathode spots are due to the effect of the magnetic field on the near-cathode plasma. The study of the characteristics of cathode spots in this paper would be helpful in the exploration of the physical process of vacuum arcs, and would be of guiding significance in optimizing the design of vacuum circuit breakers.
