The power consumption and electric field distribution in a field emission display （FED） panel is optimized with a novel pixel structure. A circuit model is proposed to estimate the total power consumption in an FED ...The power consumption and electric field distribution in a field emission display （FED） panel is optimized with a novel pixel structure. A circuit model is proposed to estimate the total power consumption in an FED panel which is composed of anode energy consumption, energy loss due to the leakage current and the energy dissipated in the parasitic capacitances. Moreover, the parasitic capacitances play a vital part in the power consumption and driving performance. In order to lower the parasitic capacitances, multiple dielectric layers are used as the gate electrode. Due to different etching speeds, a novel pixel structure is formed. As a result, the power consumption of an FED panel is reduced by 28% in a full white picture, and the electron beam performance is also better than that of the conventional structure.展开更多
The mixture of Nano-graphite and organic vehicles doped to Nano-diamond paste. The suitable paste proportion was found. Nano-diamond film (NDF) was prepared by sol-gel coating method on ITO glass at 3000/min. The fiel...The mixture of Nano-graphite and organic vehicles doped to Nano-diamond paste. The suitable paste proportion was found. Nano-diamond film (NDF) was prepared by sol-gel coating method on ITO glass at 3000/min. The field emission characteristics of luminance-current, luminance-voltage and luminance-power of Nano-diamond film were analyzed and tested. Comparing these tested curves, the luminance was well proportional to current was got. Theoretic, the inner resistance of NDF field emission display (FED) consumes electric energy and real voltage change between the cathode and the anode of NDF-FED was very small after electrons emit. So the characteristic of NDF-FED was preferable to describe by luminance-current linear relationship, which was advantageous to device tested and designed.展开更多
The field emission digital display tube with a nano-crystalline graphite cold cathode is designed and fabricated. Under the control of the driving circuits, a dynamic digital display with uniform luminance distributio...The field emission digital display tube with a nano-crystalline graphite cold cathode is designed and fabricated. Under the control of the driving circuits, a dynamic digital display with uniform luminance distribution is realized. The luminance of the character segments is 190 cd/m2 at the operating voltage of 900 V. And the stable emission is attained with a fluctuation of about 3% at an average segment current of 75 μA. The results demonstrate that nano-crystalline graphite film is a promising material for cold cathode.展开更多
A carbon-nanotube-based normally-on-driving under-gate field emission display(FED)panel and its operation principle are presented.In this panel,field emission electrons are extracted directly from the cathode by the h...A carbon-nanotube-based normally-on-driving under-gate field emission display(FED)panel and its operation principle are presented.In this panel,field emission electrons are extracted directly from the cathode by the high anode voltage.The image is realized by modulating the voltage of under-gate,whose value is less than the cathode voltage,to stop the cathode producing field emission electrons.The electric field inside the emission region is calculated by the finite element method.The emission property of the cathode is also studied by numerical calculation method.The results indicate that a uniform and large emission area can be obtained in this new under-gate FED panel.This study provides powerful theoretic support for the feasibility of this new kind of under-gate FED panel.展开更多
Aiming at the influences of poor contact at carbon nanotube (CNT)/electrode interface on luminescence stability in printed CNT film, a new co-sintering process for cathode fabrication was presented to improve the lumi...Aiming at the influences of poor contact at carbon nanotube (CNT)/electrode interface on luminescence stability in printed CNT film, a new co-sintering process for cathode fabrication was presented to improve the luminescent stability of fully printed CNT-FED. By co-sintering the printed silver and CNT layers, CNTs geometrically matched with Ag surface and/or embedded into Ag layer at the bottom of the co-sintered film, large CNTs block and bulk silver nested each other at the top of the co-sintered film. All these structures increased the contact area at CNT/Ag interface, which could increase the probability of forming ohmic contact at CNT/Ag interface. The luminescent stability of printed CNT-FED with co-sintered cathode could be improved as 5.6 times high as that of common devices.展开更多
Based on our study on field emission from multi-walled carbon nanotubes （MWNTs）, we experimentally manufactured field emission display （FED） triode with a MWNTs cold cathode, and demonstrated an excellent performa...Based on our study on field emission from multi-walled carbon nanotubes （MWNTs）, we experimentally manufactured field emission display （FED） triode with a MWNTs cold cathode, and demonstrated an excellent performance of MWNTs as field emitters. The measured luminance of the phosphor screens was 1.8 × 10^3 cd/m^2 for green light. The emission is stable with a fluctuation of only 1.5% at an average current of 260 μA.展开更多
Ultra-narrow-band phosphors have gained widespread applications in lighting and displays to enhance brightness and improve color saturation.Typical phosphor designs employ UCr_(4)C_(4)-type compounds and designing new...Ultra-narrow-band phosphors have gained widespread applications in lighting and displays to enhance brightness and improve color saturation.Typical phosphor designs employ UCr_(4)C_(4)-type compounds and designing new narrow-band phosphors with high color purity is a major challenge.Here,we explored a Eu^(2+)-doped Ba_(5)GeO_(4)Br_(6)phosphor,showing a narrow-band blue emission(λ_(em)=436 nm) excitation at the near-ultraviolet light with a full width at half maximum of 30.7 nm and high color purity of 96.6%.In addition,attractive cathodoluminescence characteristics were systematically analyzed by varying filament current(30-70 mA) and accelerating voltage(3-7 eV).Robust anti-degradation behavior and color point stability under continuous electron beam bombardment were confirmed.Given its excellent performance in photoluminescence and cathodoluminescence,application in wide color gamut displays appears promising.Using commercial phosphors β-SiAlON:Eu^(2+)and K_(2)SiF6:Mn^(4+)as green and red light co nverte rs respectively,and the title phosphor as the blue light converters,the fabricated w-LED exhibits a wide color gamut of 82% NTSC.展开更多
To obtain a triode structure canbon nanotube field emission display （CNT-FED）, the glass plate which contains a glass channels matrix is designed and used as the triode part of the CNT-FED. Normally, the gate electr...To obtain a triode structure canbon nanotube field emission display （CNT-FED）, the glass plate which contains a glass channels matrix is designed and used as the triode part of the CNT-FED. Normally, the gate electrode can be fabricated with screen printing methods and a channels matrix can be fabricated by two- faced chemical corrosion. By adjusting the etch time and the concentration of acid in the process, different shapes of the tunnels can be obtained. The size and morphology of channels are observed by a scanning electron microscope （SEM）, and the ingredients of the corrosion solution are detected by infrared ray （IR） analysis. Voltage is added to the triode structure for obtaining the brightness image of the spot on the screen. Eventually, the electron trace pulling from cathode to anode under an electric field is obtained by simulation. It is concluded that the simulation results accord with the experimental results which realize the optimized triode structure.展开更多
The HOPping Field Emission Display （HOPFED） is a new architecture for field emission displays. The main difference between a conventional Field Emission Display （FED） device and a ItOPFED lies in the spacer struct...The HOPping Field Emission Display （HOPFED） is a new architecture for field emission displays. The main difference between a conventional Field Emission Display （FED） device and a ItOPFED lies in the spacer structure. In a HOPFED, two dielectric plates, named hop and flu spacer, are sandwiched between the emitter and the front plate. The objective of this spacer structure is to improve the performance oF a FED substantially with notable contrast, color purity and luminance uniformity. In order to optimize the structure of the device and to make the electron spot on the screen match the requirement of the phosphor dot dimension, the influence of electrical and structural parameters of the device on the electron spot profile was studied by numerical simulation in this paper. Monte Carlo method was employed to calculate the potential distribution inside hop and flu spacers due to secondary electrons mechanism plays an important role in HOPFED. The results indicated that the potential distribution in the spacers and spot profile depended strongly on the hop voltage, anode voltage and spacer＇s layout. This study may provide a useful theoretical support for optimizing the structure in HOPFED.展开更多
基金The National Basic Research Program of China (973Program) (No.2003CB314702).
文摘The power consumption and electric field distribution in a field emission display （FED） panel is optimized with a novel pixel structure. A circuit model is proposed to estimate the total power consumption in an FED panel which is composed of anode energy consumption, energy loss due to the leakage current and the energy dissipated in the parasitic capacitances. Moreover, the parasitic capacitances play a vital part in the power consumption and driving performance. In order to lower the parasitic capacitances, multiple dielectric layers are used as the gate electrode. Due to different etching speeds, a novel pixel structure is formed. As a result, the power consumption of an FED panel is reduced by 28% in a full white picture, and the electron beam performance is also better than that of the conventional structure.
文摘The mixture of Nano-graphite and organic vehicles doped to Nano-diamond paste. The suitable paste proportion was found. Nano-diamond film (NDF) was prepared by sol-gel coating method on ITO glass at 3000/min. The field emission characteristics of luminance-current, luminance-voltage and luminance-power of Nano-diamond film were analyzed and tested. Comparing these tested curves, the luminance was well proportional to current was got. Theoretic, the inner resistance of NDF field emission display (FED) consumes electric energy and real voltage change between the cathode and the anode of NDF-FED was very small after electrons emit. So the characteristic of NDF-FED was preferable to describe by luminance-current linear relationship, which was advantageous to device tested and designed.
基金Science and Technology Foundation of-the Ministry of Education of China(No.205091)Natural Science Foundation of Education Department of Henan Province of China(No.2007510018).
文摘The field emission digital display tube with a nano-crystalline graphite cold cathode is designed and fabricated. Under the control of the driving circuits, a dynamic digital display with uniform luminance distribution is realized. The luminance of the character segments is 190 cd/m2 at the operating voltage of 900 V. And the stable emission is attained with a fluctuation of about 3% at an average segment current of 75 μA. The results demonstrate that nano-crystalline graphite film is a promising material for cold cathode.
基金supported by the National Key Basic Research Program 973 (No.2003CB314706).
文摘A carbon-nanotube-based normally-on-driving under-gate field emission display(FED)panel and its operation principle are presented.In this panel,field emission electrons are extracted directly from the cathode by the high anode voltage.The image is realized by modulating the voltage of under-gate,whose value is less than the cathode voltage,to stop the cathode producing field emission electrons.The electric field inside the emission region is calculated by the finite element method.The emission property of the cathode is also studied by numerical calculation method.The results indicate that a uniform and large emission area can be obtained in this new under-gate FED panel.This study provides powerful theoretic support for the feasibility of this new kind of under-gate FED panel.
基金supported by the National Natural Science Foundation of China(Grant No.60036010)the National High Technology Research and Development Program of China(Grant No.2001AA313090)the Doctoral Foundation of the National Education Administration of P.R.China(Grant No.20020698014).
文摘Aiming at the influences of poor contact at carbon nanotube (CNT)/electrode interface on luminescence stability in printed CNT film, a new co-sintering process for cathode fabrication was presented to improve the luminescent stability of fully printed CNT-FED. By co-sintering the printed silver and CNT layers, CNTs geometrically matched with Ag surface and/or embedded into Ag layer at the bottom of the co-sintered film, large CNTs block and bulk silver nested each other at the top of the co-sintered film. All these structures increased the contact area at CNT/Ag interface, which could increase the probability of forming ohmic contact at CNT/Ag interface. The luminescent stability of printed CNT-FED with co-sintered cathode could be improved as 5.6 times high as that of common devices.
基金This work was supported by the Science and Technology Foundation of Education Ministry of China under Grant No. 205091.
文摘Based on our study on field emission from multi-walled carbon nanotubes （MWNTs）, we experimentally manufactured field emission display （FED） triode with a MWNTs cold cathode, and demonstrated an excellent performance of MWNTs as field emitters. The measured luminance of the phosphor screens was 1.8 × 10^3 cd/m^2 for green light. The emission is stable with a fluctuation of only 1.5% at an average current of 260 μA.
基金Project supported by the Natural Science Foundation of Shaanxi Provincial Department of Education,China (21JK0708)the Key Laboratory for Special Function Materials and Structure Design of the Ministry of the Education of Lanzhou University,China (lzujbky-2021-kb06)。
文摘Ultra-narrow-band phosphors have gained widespread applications in lighting and displays to enhance brightness and improve color saturation.Typical phosphor designs employ UCr_(4)C_(4)-type compounds and designing new narrow-band phosphors with high color purity is a major challenge.Here,we explored a Eu^(2+)-doped Ba_(5)GeO_(4)Br_(6)phosphor,showing a narrow-band blue emission(λ_(em)=436 nm) excitation at the near-ultraviolet light with a full width at half maximum of 30.7 nm and high color purity of 96.6%.In addition,attractive cathodoluminescence characteristics were systematically analyzed by varying filament current(30-70 mA) and accelerating voltage(3-7 eV).Robust anti-degradation behavior and color point stability under continuous electron beam bombardment were confirmed.Given its excellent performance in photoluminescence and cathodoluminescence,application in wide color gamut displays appears promising.Using commercial phosphors β-SiAlON:Eu^(2+)and K_(2)SiF6:Mn^(4+)as green and red light co nverte rs respectively,and the title phosphor as the blue light converters,the fabricated w-LED exhibits a wide color gamut of 82% NTSC.
基金The National Basic Research Program of China(973Program) (No2003CB314702,2003CB314706)the PhDPro-grams Foundation of Ministry of Education of China ( No20030286003)the Program for New Century Excellent Talents in Uni-versity (NoNCET-04-0473)
文摘To obtain a triode structure canbon nanotube field emission display （CNT-FED）, the glass plate which contains a glass channels matrix is designed and used as the triode part of the CNT-FED. Normally, the gate electrode can be fabricated with screen printing methods and a channels matrix can be fabricated by two- faced chemical corrosion. By adjusting the etch time and the concentration of acid in the process, different shapes of the tunnels can be obtained. The size and morphology of channels are observed by a scanning electron microscope （SEM）, and the ingredients of the corrosion solution are detected by infrared ray （IR） analysis. Voltage is added to the triode structure for obtaining the brightness image of the spot on the screen. Eventually, the electron trace pulling from cathode to anode under an electric field is obtained by simulation. It is concluded that the simulation results accord with the experimental results which realize the optimized triode structure.
文摘The HOPping Field Emission Display （HOPFED） is a new architecture for field emission displays. The main difference between a conventional Field Emission Display （FED） device and a ItOPFED lies in the spacer structure. In a HOPFED, two dielectric plates, named hop and flu spacer, are sandwiched between the emitter and the front plate. The objective of this spacer structure is to improve the performance oF a FED substantially with notable contrast, color purity and luminance uniformity. In order to optimize the structure of the device and to make the electron spot on the screen match the requirement of the phosphor dot dimension, the influence of electrical and structural parameters of the device on the electron spot profile was studied by numerical simulation in this paper. Monte Carlo method was employed to calculate the potential distribution inside hop and flu spacers due to secondary electrons mechanism plays an important role in HOPFED. The results indicated that the potential distribution in the spacers and spot profile depended strongly on the hop voltage, anode voltage and spacer＇s layout. This study may provide a useful theoretical support for optimizing the structure in HOPFED.
