This article presents an integrated current mode configurable analog block(CAB)system for field-programmable analog array(FPAA).The proposed architecture is based on the complementary metal-oxide semiconductor(CMOS)tr...This article presents an integrated current mode configurable analog block(CAB)system for field-programmable analog array(FPAA).The proposed architecture is based on the complementary metal-oxide semiconductor(CMOS)transistor level design where MOSFET transistors operating in the saturation region are adopted.The proposed CAB architecture is designed to implement six of thewidely used current mode operations in analog processing systems:addition,subtraction,integration,multiplication,division,and pass operation.The functionality of the proposed CAB is demonstrated through these six operations,where each operation is chosen based on the user’s selection in the CAB interface system.The architecture of the CAB system proposes an optimized way of designing and integrating only three functional cells with the interface circuitry to achieve the six operations.Furthermore,optimized programming and digital tuning circuitry are implemented in the architecture to control and interface with the functional cells.Moreover,these designed programming and tuning circuitries play an essential role in optimizing the performance of the proposed design.Simulation of the proposed CMOS Transistor Based CAB system is carried out using Tanner EDA Tools in 0.35μm standard CMOS technology.The design uses a±1.5 V power supply and results in maximum 3 dB bandwidth of 34.9 MHz and an approximate size of 0.0537 mm2.This demonstrates the advantages of the design over the current state-of-the-art designs presented for comparison in this article.Consequently,the proposed design has a clear aspect of simplicity,low power consumption,and high bandwidth operation,which makes it a suitable candidate for mobile telecommunications applications.展开更多
The drive towards shorter design cycles for analog integrated circuits has given impetus to the development of Field Programmable Analog Arrays(FPAAs),which are the analogue counterparts of Field Programmable Gate Arr...The drive towards shorter design cycles for analog integrated circuits has given impetus to the development of Field Programmable Analog Arrays(FPAAs),which are the analogue counterparts of Field Programmable Gate Arrays(FPGAs).In this paper,we present a new design methodology which using FPAA as a powerful analog front-end processing platform in the smart sensory microsystem.The proposed FPAA contains 16 homogeneous mixed-grained Configurable Analog Blocks(CABs) which house a variety of processing elements especially the proposed fine-grained Core Configurable Amplifiers(CCAs).The high flexible CABs allow the FPAA operating in both continuous-time and discrete-time approaches suitable to support variety of sensors.To reduce the nonideal parasitic effects and save area,the fat-tree interconnection network is adopted in this FPAA.The functionality of this FPAA is demonstrated through embedding of voltage and capacitive sensor signal readout circuits and a configurable band pass filter.The minimal detectable voltage and capacitor achieves 38 uV and 8.3 aF respectively within 100 Hz sensor bandwidth.The power consumption comparison of CCA in three applications shows that the FPAA has high power efficiency.And the simulation results also show that the FPAA has good tolerance with wide PVT variations.展开更多
针对无线传感器网络自身的可靠性和维护问题,提出了一种基于FPAA(field programmable analog arrays)的自修复智能无线传感器节点的实现方法。该方法以FPAA为核心构成传感器的主要信号调理电路,节点设计有硬件故障自诊断功能,在节点部...针对无线传感器网络自身的可靠性和维护问题,提出了一种基于FPAA(field programmable analog arrays)的自修复智能无线传感器节点的实现方法。该方法以FPAA为核心构成传感器的主要信号调理电路,节点设计有硬件故障自诊断功能,在节点部分硬件模块发生故障的情况下,可修复相应故障,确保节点在无人职守及野外应用时的可靠性,避免节点的直接丢弃。重点介绍了自修复节点的实现方法、软硬件研发并对节点进行了自修复实验研究,分析了自修复节点的功耗及可工作时间,节点能够在2节具有1 700 mAh的AA电池的供电下工作半年时间。展开更多
A binary tree representation is designed in this paper for optimization of wave digital filter（WDF）implementation.To achieve this,an equivalent WDF model of the original circuit is converted into abinary tree repres...A binary tree representation is designed in this paper for optimization of wave digital filter（WDF）implementation.To achieve this,an equivalent WDF model of the original circuit is converted into abinary tree representation at first.This WDF binary tree can then be transformed to several topologies with the same implication,since the WDF adaptors have a symmetrical behavior on their ports.Because the WDF implementation is related to field programmable gate array（FPGA）resource usage and the cycle time of emulation,choosing aproper binary tree topology for WDF implementation can help balance the complexity and performance quality of an emulation system.Both WDF-FPGA emulation and HSpice simulation on the same circuit are tested.There is no significant difference between these two simulations.However,in terms of time consumption,the WDF-FPGA emulation has an advantage over the other.Our experiment also demonstrates that the optimized WDF-FPGA emulation has an acceptable accuracy and feasibility.展开更多
基金This work was supported in part by the Geran Galakan Penyelidik Muda Grant(GGPM),Universiti Kebangsaan Malaysia,Selangor,Malaysia under grant GGPM-2021-055.
文摘This article presents an integrated current mode configurable analog block(CAB)system for field-programmable analog array(FPAA).The proposed architecture is based on the complementary metal-oxide semiconductor(CMOS)transistor level design where MOSFET transistors operating in the saturation region are adopted.The proposed CAB architecture is designed to implement six of thewidely used current mode operations in analog processing systems:addition,subtraction,integration,multiplication,division,and pass operation.The functionality of the proposed CAB is demonstrated through these six operations,where each operation is chosen based on the user’s selection in the CAB interface system.The architecture of the CAB system proposes an optimized way of designing and integrating only three functional cells with the interface circuitry to achieve the six operations.Furthermore,optimized programming and digital tuning circuitry are implemented in the architecture to control and interface with the functional cells.Moreover,these designed programming and tuning circuitries play an essential role in optimizing the performance of the proposed design.Simulation of the proposed CMOS Transistor Based CAB system is carried out using Tanner EDA Tools in 0.35μm standard CMOS technology.The design uses a±1.5 V power supply and results in maximum 3 dB bandwidth of 34.9 MHz and an approximate size of 0.0537 mm2.This demonstrates the advantages of the design over the current state-of-the-art designs presented for comparison in this article.Consequently,the proposed design has a clear aspect of simplicity,low power consumption,and high bandwidth operation,which makes it a suitable candidate for mobile telecommunications applications.
基金Supported by the CAS/SAFEA International Partnership Program for Creative Research Teams,National High Technology Research and Develop Program of China(2012AA012301)National Science and Technology Major Project of China(2013ZX03006004)
文摘The drive towards shorter design cycles for analog integrated circuits has given impetus to the development of Field Programmable Analog Arrays(FPAAs),which are the analogue counterparts of Field Programmable Gate Arrays(FPGAs).In this paper,we present a new design methodology which using FPAA as a powerful analog front-end processing platform in the smart sensory microsystem.The proposed FPAA contains 16 homogeneous mixed-grained Configurable Analog Blocks(CABs) which house a variety of processing elements especially the proposed fine-grained Core Configurable Amplifiers(CCAs).The high flexible CABs allow the FPAA operating in both continuous-time and discrete-time approaches suitable to support variety of sensors.To reduce the nonideal parasitic effects and save area,the fat-tree interconnection network is adopted in this FPAA.The functionality of this FPAA is demonstrated through embedding of voltage and capacitive sensor signal readout circuits and a configurable band pass filter.The minimal detectable voltage and capacitor achieves 38 uV and 8.3 aF respectively within 100 Hz sensor bandwidth.The power consumption comparison of CCA in three applications shows that the FPAA has high power efficiency.And the simulation results also show that the FPAA has good tolerance with wide PVT variations.
基金Supported by the National Natural Science Foundation of China(61271113)
文摘A binary tree representation is designed in this paper for optimization of wave digital filter（WDF）implementation.To achieve this,an equivalent WDF model of the original circuit is converted into abinary tree representation at first.This WDF binary tree can then be transformed to several topologies with the same implication,since the WDF adaptors have a symmetrical behavior on their ports.Because the WDF implementation is related to field programmable gate array（FPGA）resource usage and the cycle time of emulation,choosing aproper binary tree topology for WDF implementation can help balance the complexity and performance quality of an emulation system.Both WDF-FPGA emulation and HSpice simulation on the same circuit are tested.There is no significant difference between these two simulations.However,in terms of time consumption,the WDF-FPGA emulation has an advantage over the other.Our experiment also demonstrates that the optimized WDF-FPGA emulation has an acceptable accuracy and feasibility.
