A flux linkage compensation field oriented control (FOC) method was proposed to suppress the speed and torque ripples of a brushless wound-field synchronous motor in its starting process. The starting process was anal...A flux linkage compensation field oriented control (FOC) method was proposed to suppress the speed and torque ripples of a brushless wound-field synchronous motor in its starting process. The starting process was analyzed and the model of wound-field synchronous electric machine was established. The change of field current of the electric machine was described mathematically for simplified exciter and rotate rectifier. Based on the traditional field control, the flux linkage compensation was introduced in d-axis current to counteract the flux ripple. Some simulation and preliminary experiments were implemented. The results show that the proposed method is feasible and effective.展开更多
Wound field switched flux(WFSF)machines exhibits characteristics of the simple robust rotor,flexible flux-adjustable capability,and no risk of demagnetization.However,they suffer from a poor torque density compared wi...Wound field switched flux(WFSF)machines exhibits characteristics of the simple robust rotor,flexible flux-adjustable capability,and no risk of demagnetization.However,they suffer from a poor torque density compared with permanent magnet machines due to the saturation.Therefore,in this paper,two WFSF machines with single-and double-layer DC windings,respectively,are optimized for the maximum torque.The end-winding(EW)lengths differ in these two machines,which can affect the optimal design.Design parameters including the DC to armature winding copper loss ratio,slot area ratio and split ratio are optimized when two machines have the same copper loss and overall sizes.In addition,the influence of the flux density ratio,total copper loss,air-gap length and aspect ratio on the optimal split ratio is investigated using the finite element method and results are explained through the analytical model accounting for the saturation.It is discovered that the EWs have no effect on the optimal copper loss ratio,which is unity.In terms of the slot area ratio,the machine with single-layer DC windings prefers smaller DC slot areas than armature slot areas.In the WFSF machine with longer EWs,the optimal split ratio becomes smaller.Moreover,compared with other parameters,the flux density ratio can significantly affect the optimal split ratio.展开更多
As members of doubly salient magnetless linear machines,linear variable flux reluctance(LVFR)and wound field flux reversal(LWFFR)machines inherit the merits of conventional magnetless linear machines such as low cost,...As members of doubly salient magnetless linear machines,linear variable flux reluctance(LVFR)and wound field flux reversal(LWFFR)machines inherit the merits of conventional magnetless linear machines such as low cost,high flux adjustment capability and high reliability.Furthermore,like linear switched reluctance machine,they have a very simple and compact long secondary,which are very attractive for long stroke applications.However,low force capability is their major defect.To solve this issue,new LVFR and LWFFR machine topologies were proposed in recent work,while lacking studies on their force improvement mechanism and further force evaluation.In this paper,LVFR and LWFFR machines with improved force performance are comparatively studied with the emphasis on their force capabilities.The operation principle of the two machines is analyzed based on magnetic field harmonics produced by flux modulation.Contributions of air-gap flux density harmonic components to no-load back electromagnetic forces of the two machines are analyzed and the average force equation is derived.Moreover,force capabilities of the both machines are investigated by means of the time-stepping finite-element analysis to verify the theoretical analysis.展开更多
This study proposes a novel asymmetric rotor pole design for wound field synchronous machines(WFSMs),which can achieve high saliency ratio and also low torque ripple.The key point is the optimal design of the asymmetr...This study proposes a novel asymmetric rotor pole design for wound field synchronous machines(WFSMs),which can achieve high saliency ratio and also low torque ripple.The key point is the optimal design of the asymmetric rotor pole with the inverse-cosine-shaped(ICS)plus reverse 3rd harmonic shaping.The asymmetric rotor pole can help to improve the average output torque by enhancing the saliency ratio.The reverse 3rd harmonic shaping on the rotor pole surface is mainly used to reduce the torque ripple.To certify the effectivity of the proposed design,three-phase 54-slot/6-pole 4.7kW WFSMs with uniform air gap and with non-uniform air gap shaped by the ICS plus optimum reverse 3rd harmonic are utilized as the basic model and referenced model for comparison.For the referenced model,the optimum amplitude of reverse 3rd harmonic is preferred as 1/6.Finally,all electromagnetic characteristics of the investigated machines are predicted by the finite-element method(FEM).The highest saliency ratio and comparatively low torque ripple have been verified.展开更多
基金Sponsored by the NSFC General Project (51177135)the Key Project of Natural Science Foundation of Shaanxi Province (2011GZ013)
文摘A flux linkage compensation field oriented control (FOC) method was proposed to suppress the speed and torque ripples of a brushless wound-field synchronous motor in its starting process. The starting process was analyzed and the model of wound-field synchronous electric machine was established. The change of field current of the electric machine was described mathematically for simplified exciter and rotate rectifier. Based on the traditional field control, the flux linkage compensation was introduced in d-axis current to counteract the flux ripple. Some simulation and preliminary experiments were implemented. The results show that the proposed method is feasible and effective.
基金supported in part by the National Key R&D Program of China under 2019YFB1503700by the National Natural Science Foundation of China under Grant 51677169。
文摘Wound field switched flux(WFSF)machines exhibits characteristics of the simple robust rotor,flexible flux-adjustable capability,and no risk of demagnetization.However,they suffer from a poor torque density compared with permanent magnet machines due to the saturation.Therefore,in this paper,two WFSF machines with single-and double-layer DC windings,respectively,are optimized for the maximum torque.The end-winding(EW)lengths differ in these two machines,which can affect the optimal design.Design parameters including the DC to armature winding copper loss ratio,slot area ratio and split ratio are optimized when two machines have the same copper loss and overall sizes.In addition,the influence of the flux density ratio,total copper loss,air-gap length and aspect ratio on the optimal split ratio is investigated using the finite element method and results are explained through the analytical model accounting for the saturation.It is discovered that the EWs have no effect on the optimal copper loss ratio,which is unity.In terms of the slot area ratio,the machine with single-layer DC windings prefers smaller DC slot areas than armature slot areas.In the WFSF machine with longer EWs,the optimal split ratio becomes smaller.Moreover,compared with other parameters,the flux density ratio can significantly affect the optimal split ratio.
基金supported in part by the National Natural Science Foundation of China under Grant 51977099 and Grant 52177044in part by the Hong Kong Scholars Program under Grant XJ2019031+2 种基金in part by the China Postdoctoral Science Foundation under Grant 2019T120395in part by the Natural Science Foundation of Jiangsu Higher Education Institutions under Grant 21KJA470004in part by the Priority Academic Program Development of Jiangsu Higher Education Institutions.
文摘As members of doubly salient magnetless linear machines,linear variable flux reluctance(LVFR)and wound field flux reversal(LWFFR)machines inherit the merits of conventional magnetless linear machines such as low cost,high flux adjustment capability and high reliability.Furthermore,like linear switched reluctance machine,they have a very simple and compact long secondary,which are very attractive for long stroke applications.However,low force capability is their major defect.To solve this issue,new LVFR and LWFFR machine topologies were proposed in recent work,while lacking studies on their force improvement mechanism and further force evaluation.In this paper,LVFR and LWFFR machines with improved force performance are comparatively studied with the emphasis on their force capabilities.The operation principle of the two machines is analyzed based on magnetic field harmonics produced by flux modulation.Contributions of air-gap flux density harmonic components to no-load back electromagnetic forces of the two machines are analyzed and the average force equation is derived.Moreover,force capabilities of the both machines are investigated by means of the time-stepping finite-element analysis to verify the theoretical analysis.
文摘This study proposes a novel asymmetric rotor pole design for wound field synchronous machines(WFSMs),which can achieve high saliency ratio and also low torque ripple.The key point is the optimal design of the asymmetric rotor pole with the inverse-cosine-shaped(ICS)plus reverse 3rd harmonic shaping.The asymmetric rotor pole can help to improve the average output torque by enhancing the saliency ratio.The reverse 3rd harmonic shaping on the rotor pole surface is mainly used to reduce the torque ripple.To certify the effectivity of the proposed design,three-phase 54-slot/6-pole 4.7kW WFSMs with uniform air gap and with non-uniform air gap shaped by the ICS plus optimum reverse 3rd harmonic are utilized as the basic model and referenced model for comparison.For the referenced model,the optimum amplitude of reverse 3rd harmonic is preferred as 1/6.Finally,all electromagnetic characteristics of the investigated machines are predicted by the finite-element method(FEM).The highest saliency ratio and comparatively low torque ripple have been verified.
