Movement behavior and separation of Al_(2)O_(3)from Al melt under rotating magnetic field

The effect of a rotating magnetic field(RMF)on the distribution of Al_(2)O_(3)particles with an Al melt was studied by means of simulation and experiment.The results show that Al_(2)O_(3)particles(diameter of 1-10μm,1wt.%)are significantly agglomerated at the top of ingots when subjected to an RMF,and their distribution is influenced by both the intensity and the duration of RMF application.The optimal separation efficiency is achieved with the magnetic intensity of 12 mT for 120 s.The number of the particles at the bottom and the middle decreases by 64.5%and 69.7%,respectively,while that at the top increases by 242.5%compared to the condition without an RMF.However,if further increase the intensity or the duration of RMF,it can induce turbulent flows that draw some of the separated Al_(2)O_(3)particles back into the melt,reducing separation efficiency.The calculation results show that as the magnetic intensity increases from 6 mT to 18 mT,the velocity difference between the particles and the Al melt flow quadruples,increasing from 0.013 m·s^(-1)to 0.066 m·s^(-1).Driven by this velocity difference,centrifugal motion,and secondary circulation,Al_(2)O_(3)particles tend to migrate upwards within the melt,facilitating the separation of impurity particles and enhancing the purity of the melt.

Secure Image Communication Using Galois Field,Hyper 3D Logistic Map,and B92 Quantum Protocol

In this paper,we propose a novel secure image communication system that integrates quantum key distribution and hyperchaotic encryption techniques to ensure enhanced security for both key distribution and plaintext encryption.Specifically,we leverage the B92 Quantum Key Distribution(QKD)protocol to secure the distribution of encryption keys,which are further processed through Galois Field(GF(28))operations for increased security.The encrypted plaintext is secured using a newly developed Hyper 3D Logistic Map(H3LM),a chaotic system that generates complex and unpredictable sequences,thereby ensuring strong confusion and diffusion in the encryption process.This hybrid approach offers a robust defense against quantum and classical cryptographic attacks,combining the advantages of quantum-level key distribution with the unpredictability of hyperchaos-based encryption.The proposed method demonstrates high sensitivity to key changes and resilience to noise,compression,and cropping attacks,ensuring both secure key transmission and robust image encryption.

Interfacial built-in electric field and crosslinking pathways enabling WS_(2)/Ti_(3)C_(2)T_(x) heterojunction with robust sodium storage at low temperature

Developing efficient energy storage for sodium-ion batteries(SIBs)by creating high-performance heterojunctions and understanding their interfacial interaction at the atomic/molecular level holds promise but is also challenging.Besides,sluggish reaction kinetics at low temperatures restrict the operation of SIBs in cold climates.Herein,cross-linking nanoarchitectonics of WS_(2)/Ti_(3)C_(2)T_(x) heterojunction,featuring built-in electric field(BIEF),have been developed,employing as a model to reveal the positive effect of heterojunction design and BIEF for modifying the reaction kinetics and electrochemical activity.Particularly,the theoretical analysis manifests the discrepancy in work functions leads to the electronic flow from the electron-rich Ti_(3)C_(2)T_(x) to layered WS_(2),spontaneously forming the BIEF and“ion reservoir”at the heterogeneous interface.Besides,the generation of cross-linking pathways further promotes the transportation of electrons/ions,which guarantees rapid diffusion kinetics and excellent structure coupling.Consequently,superior sodium storage performance is obtained for the WS_(2)/Ti_(3)C_(2)T_(x) heterojunction,with only 0.2%decay per cycle at 5.0 A g^(-1)(25℃)up to 1000 cycles and a high capacity of 293.5 mA h g^(-1)(0.1A g^(-1)after 100 cycles)even at-20℃.Importantly,the spontaneously formed BIEF,accompanied by“ion reservoir”,in heterojunction provides deep understandings of the correlation between structure fabricated and performance obtained.

An Explanation of the Temperature-Dependent Upper Critical Field Data of H3S on the Basis of the Thermodynamics of a Superconductor in a Magnetic Field

Excellent fits to a couple of the data-sets on the temperature (T)-dependent upper critical field (Hc2) of H3S (critical temperature, Tc ≈ 200 K at pressure ≈ 150 GPa) reported by Mozaffari, et al. (2019) were obtained by Talantsev (2019) in an approach based on an ingenious mix of the Ginzberg-Landau (GL), the Werthamer, Helfand and Hohenberg (WHH), and the Gor’kov, etc., theories which have individually been employed for the same purpose for a long time. Up to the lowest temperature (TL) in each of these data-sets, similarly accurate fits have also been obtained by Malik and Varma (2023) in a radically different approach based on the Bethe-Salpeter equation (BSE) supplemented by the Matsubara and the Landau quantization prescriptions. For T TL, however, while the (GL, WHH, etc.)-based approach leads to Hc2(0) ≈ 100 T, the BSE-based approach leads to about twice this value even at 1 K. In this paper, a fit to one of the said data-sets is obtained for the first time via a thermodynamic approach which, up to TL, is as good as those obtained via the earlier approaches. While this is interesting per se, another significant result of this paper is that for T TL it corroborates the result of the BSE-based approach.

Cortico-striatal gamma oscillations are modulated by dopamine D3 receptors in dyskinetic rats

Long-term levodopa administration can lead to the development of levodopa-induced dyskinesia.Gamma oscillations are a widely recognized hallmark of abnormal neural electrical activity in levodopa-induced dyskinesia.Currently,studies have reported increased oscillation power in cases of levodopa-induced dyskinesia.However,little is known about how the other electrophysiological parameters of gamma oscillations are altered in levodopa-induced dyskinesia.Furthermore,the role of the dopamine D3 receptor,which is implicated in levodopa-induced dyskinesia,in movement disorder-related changes in neural oscillations is unclear.We found that the cortico-striatal functional connectivity of beta oscillations was enhanced in a model of Parkinson’s disease.Furthermore,levodopa application enhanced cortical gamma oscillations in cortico-striatal projections and cortical gamma aperiodic components,as well as bidirectional primary motor cortex(M1)↔dorsolateral striatum gamma flow.Administration of PD128907(a selective dopamine D3 receptor agonist)induced dyskinesia and excessive gamma oscillations with a bidirectional M1↔dorsolateral striatum flow.However,administration of PG01037(a selective dopamine D3 receptor antagonist)attenuated dyskinesia,suppressed gamma oscillations and cortical gamma aperiodic components,and decreased gamma causality in the M1→dorsolateral striatum direction.These findings suggest that the dopamine D3 receptor plays a role in dyskinesia-related oscillatory activity,and that it has potential as a therapeutic target for levodopa-induced dyskinesia.

Temperature and stress fields in electron beam welded Ti-15-3 alloy to 304 stainless steel joint with copper interlayer sheet

Electron beam welding of Ti-15-3 alloy to 304 stainless steel （STS） using a copper filler metal was carried out. The temperature fields and stress distributions in the Ti/Fe and Ti/Cu/Fe joint during the welding process were numerically simulated and experimentally measured. The results show that the rotated parabola body heat source is fit for the simulation of the electron beam welding. The temperature distribution is asymmetric along the weld center and the temperature in the titanium alloy plate is higher than that in the 304 STS plate. The thermal stress also appears to be in asymmetric distribution. The residual tensile stress mainly exists in the weld at the 304 STS side. The copper filler metal decreases the peak temperature and temperature grade in the joint as well as the residual stress. The longitudinal and lateral residual tensile strengths reduce by 66 MPa and 31 MPa, respectively. From the temperature and residual stress, it is concluded that copper is a good filler metal candidate for the electron beam welding of Ti-15-3 titanium alloy to 304 stainless steel.

Visualization of 3-D Field of Explosion

In order to visualize the 3-D field of explosion and describe the complex physical phenomena of explosion, the 3-D data resulting from numerical simulation by 3-D multi-material in cell (MMIC), and the application of volume visualization is explored, based on the characteristics of explosion and shock. Based on this, a visualization system for 3-D explosion--ViSC3D is designed. Approaches for the visualization of 3-D field of explosion are presented. The algorithm and the functions of ViSC3D are also presented. ViSC3D is thus a useful tool to observe and analyze either the full picture or the details of a 3-D field of explosion, that are difficult to observe and analyze directly. With ViSC3D, the field of explosion between the hill slopes is visualized. The cutaway views and 2-D slices are also given. The full picture and partial details of 3-D field of explosion can be observed clearly. Furthermore, ViSC3D can be used to visualize other similar 3-D data fields.

3D-HoVAIF模型用于八角茴香油成分色谱保留时间研究

本文采用GC/MS测定了八角茴香油中各组分,应用本实验室新近提出的三维原子场全息作用矢量(3D-HoVAIF)对鉴定的48个挥发性有机物的结构进行了表征,并分别采用了偏最小二乘回归(PLS)与多元线性回归(MLR)进行了建模研究。结果表明,3D-HoVAIF能够较好地表征茴香油中各组分的化学结构,所建模型具有良好的估计能力与稳定性。

3D FEM simulation of flow velocity field for 5052 aluminum alloy multi-row sprocket in cold semi-precision forging process

Based on the design of the multi-row sprocket with a new tooth profile,a cold semi-precision forging process for manufacturing 5052 aluminum alloy multi-row sprocket was presented.Through simulating the forging process of 5052 aluminum alloy sprocket billet with 3D rigid-viscoplastic FEM,both the distributions of flow velocity field in axial(U_Z),radial(U_R) and circumferential(U_θ) directions and the curves of velocity component in different deformation regions were respectively obtained.By comparison and analysis of the velocity varying curves,the velocity component relation conditions for filling the die cavity were clarified.It shows that when the die cavity is almost fully filled,the circumferential velocity U_θ increases sharply,implying that U_θplays a key role in fully filling the die cavity.

Fe-3%Si合金薄带连铸板热处理过程层状异构组织演变的相场模拟研究

本研究基于Fe-3%Si合金铸轧板材组织特征,构建了不同类型柱状晶/等轴晶层状异构组织相场模型,实现了界面曲率为驱动力的情况下层状异构组织的高温粗化过程模拟,量化分析了层状异构特征对铸轧组织演化过程的影响规律。研究表明,由于晶粒长径比对晶粒尖端曲率的影响,当初始状态下柱状晶长径比较高时,在界面曲率的驱动下最终会形成等轴化的多晶组织;反之则等轴化程度减小。明确了不同类型异构组织演化特征,相同退火时间下组织的等轴化程度受其层状异构特征的影响,这一现象的本质是等轴晶通过自身演化引起柱状晶两端曲率变化,诱发柱状晶间的相互“吞噬”并发生等轴化,柱状晶则在部分结构的组织中生长至带钢表面后停止生长,最终保持柱状特征。本研究进一步加深了对铸态薄带中初始凝固组织在后续热处理时演化过程的认识,对硅钢制备工艺优化具有重要的理论指导意义和实际应用价值。

QSAR Study on Some N-[5-(2-Furanyl)-2-methyl-4-oxo-4H-thieno[2,3-d]pyrimidin-3-yl]-carboxamide and 3-Substituted-5-(2-furanyl)-2-methyl-3H-thieno-[2,3-d]pyrimidin-4-ones Using Three-dimensional Holographic Vector of Atomic Interaction Field

Study on the quantitative structure-activity relationship （QSAR） of 26 compounds, N-[5-（2-furanyl）-2-methyl-4-oxo-4H-thieno[2,3-d]pyrimidin-3-yl]-carboxamide and 3-substituted- 5-（2-furanyl）-2-methyl-3H-thieno[2,3-d]pyrimidin-4-ones, with three-dimensional holographic vector of atomic interaction field （3D-HoVAIF） was carried out. SMR-PLS QSAR models have been created and good correlation coefficients and cross-validated correlation coefficients were obtained. The result shows that the models have good prediction capability and favorable stability and the 3D-HoVAIF is applicable to the molecular structural characterization and biological activity prediction.

Present-day 3D deformation field of Northeast China,observed by GPS and leveling

A broad view of present-day 3D deformation field around the Northeast China region was derived from GPS and leveling observations. We draw the following conclusions： First, the Northeast China region moved towards northwest with an average velocity of 5 ram/a, with respect to South China. The entire Northeast China region was in a low strain state from the strain rate field. Second, we processed two periods of first- order leveling data in 1970s and 1990s, showing the vertical deformation of the Northeast China region is ＂uplift in western part and subsidence in eastern part＇

Electric-Field-Treated Ni/Co_(3)O_(4) Film as High-Performance Bifunctional Electrocatalysts for Efficient Overall Water Splitting

Rational design of bifunctional electrocatalysts for oxygen evolution reaction(OER)and hydrogen evolution reaction(HER)with excellent activity and stability is of great significance,since overall water splitting is a promising technology for sustainable conversion of clean energy.However,most electrocatalysts do not simultaneously possess optimal HER/OER activities and their electrical conductivities are intrinsically low,which limit the development of overall water splitting.In this paper,a strategy of electric field treatment is proposed and applied to Ni/Co_(3)O_(4) film to develop a novel bifunctional electrocatalyst.After treated by electric field,the conductive channels consisting of oxygen vacancies are formed in the Co_(3)O_(4) film,which remarkably reduces the resistance of the system by almost 2×10^(4) times.Meanwhile,the surface Ni metal electrode is partially oxidized to nickel oxide,which enhances the catalytic activity.The electric-field-treated Ni/Co_(3)O_(4) material exhibits super outstanding performance of HER,OER,and overall water splitting,and the catalytic activity is significantly superior to the state-of-the-art noble metal catalysts(Pt/C,RuO_(2),and RuO_(2)‖Pt/C couple).This work provides an effective and feasible method for the development of novel and efficient bifunctional electrocatalyst,which is also promising for wide use in the field of catalysis.

Low field induced giant anisotropic magnetocaloric effect in DyFeO_3 single crystal

We have investigated the anisotropic magnetocaloric effect and the rotating field magnetic entropy in Dy FeO3 single crystal. A giant rotating field entropy change of -ΔSM^R = 16.62 J/kg·K was achieved from b axis to c axis in bc plane at 5 K for a low field change of 20 k Oe. The large anisotropic magnetic entropy change is mainly accounted for the 4 f electron of rare-earth Dy^3＋ ion. The large value of rotating field entropy change, together with large refrigeration capacity and negligible hysteresis, suggests that the multiferroic ferrite Dy FeO3 singlecrystal could be a potential material for anisotropic magnetic refrigeration at low field, which can be realized in the practical application around liquid helium temperature region.

Numerical Simulation of the Protective Effect of Complex Boundaries Toward Shock Waves in a 3D Explosive Field

A numerical method is presented that simulates 3D explosive field problems. A code MMIC3D using this method can be used to simulate the propagation and reflected effects of all kinds of rigid boundaries to shock waves produced by an explosive source. These numerical results indicate that the code MMIC3D has the ability in computing cases such as 3D shock waves produced by air explosion, vortex region of the shock wave, the Mach wave, and reflected waves behind rigid boundaries.

Method for fitting crystal field parameters and the energy level fitting for Yb^(3+) in crystal Sc_2O_3

A method to compute the numerical derivative of eigenvalues of parameterized crystal field Hamiltonian matrix is given, based on the numerical derivatives the general iteration methods such as Levenberg-Marquardt, Newton method, and so on, can be used to solve crystal field parameters by fitting to experimental energy levels. With the numerical eigenvalue derivative, a detailed iteration algorithm to compute crystal field parameters by fitting experimental energy levels has also been described. This method is used to compute the crystal parameters of Yb^3＋ in Sc2O3 crystal, which is prepared by a co-precipitation method and whose structure was refined by Rietveld method. By fitting on the parameters of a simple overlap model of crystal field, the results show that the new method can fit the crystal field energy splitting with fast convergence and good stability.

3D Eddy Current and Temperature Field Analysis of Large Hydro-generators in Leading Phase Operations

As a common practice,a large hydro-generator will operate in leading phase conditions to absorb the reactive power of the power grid.However,the accurate and precise prediction of the leading phase operation capacity of a large hydro-generator has always been a formidable challenge to engineers and academicians because it is extremely hard to compute the eddy currents and losses as well as the local overheating in the pressure plate and finger.To address this problem,a full three dimensional(3D)finite element model and method of the coupled eddy current and temperature fields in the end region of a large hydro-generator are developed.The equivalent medium parameters used in the computations are comprehensively discussed.Moreover,some numerically based solution methodologies for accurate computation of the field and armature currents under different leading phase conditions are proposed.Numerical results on the coupled eddy current and temperature fields in the end regions of a 250 MW hydro-generator confirm positively the feasibility of the present work.

Progress of power field effect transistor based on ultra-wide bandgap Ga_2O_3 semiconductor material

As a promising ultra-wide bandgap semiconductor, gallium oxide(Ga_2O_3) has attracted increasing attention in recent years. The high theoretical breakdown electrical field(8 MV/cm), ultra-wide bandgap(～ 4.8 eV) and large Baliga's figure of merit(BFOM) of Ga_2O_3 make it a potential candidate material for next generation high-power electronics, including diode and field effect transistor(FET). In this paper, we introduce the basic physical properties of Ga_2O_3 single crystal, and review the recent research process of Ga_2O_3 based field effect transistors. Furthermore, various structures of FETs have been summarized and compared, and the potential of Ga_2O_3 is preliminary revealed. Finally, the prospect of the Ga_2O_3 based FET for power electronics application is analyzed.

内电场增强管状Z型In_(2)O_(3)/In_(2)S_(3)异质结的可控合成及光催化性能

构建具有特殊形貌和增强内电场的异质结材料可以有效提高光催化剂的光生电子-空穴对的分离效率,从而提升光催化活性。采用两步溶剂热+热解可控合成了金属有机骨架(MOFs)衍生的Z型In_(2)O_(3)/In_(2)S_(3)异质结,利用表征分析、光催化降解实验对构建的异质结物相、形貌、光学特性和活性进行了系统研究。结果表明,管状形貌的In_(2)O_(3)/In_(2)S_(3)具有强的光吸收响应,在In_(2)O_(3)和In_(2)S_(3)界面处形成的强内电场抑制了光生电子-空穴对的复合。在可见光照射下,质量比1∶1的In_(2)O_(3)/In_(2)S_(3)表现出最优异的光催化活性,在60 min内对盐酸四环素(TCH)的降解率达到68.44%,反应动力学常数分别比In_(2)O_(3)和In_(2)S_(3)提高了29.8和3.2倍,经3次循环表现出良好的稳定性。电化学测试和自由基捕获试验表明,In_(2)O_(3)/In_(2)S_(3)异质结内电场强度相比In_(2)O_(3)和In_(2)S_(3)分别提高了3.89和2.42倍,超氧自由基(·O_(2)^(-))和空穴(h^(+))是光催化过程中主要活性物质。该研究为强内电场异质结的高效光催化剂可控合成提供了一种有效策略。

A simulation study of field plate termination in Ga2O3 Schottky barrier diodes

In this work, the field plate termination is studied for Ga2O3Schottky barrier diodes(SBDs) by simulation. The influence of field plate overlap, dielectric material and thickness on the termination electric field distribution are demonstrated.It is found that the optimal thickness increases with reverse bias increasing for all the three dielectrics of SiO2, Al2O3, and HfO2. As the thickness increases, the maximum electric field intensity decreases in SiO2and Al2O3, but increases in HfO2.Furthermore, it is found that SiO2and HfO2are suitable for the 600 V rate Ga2O3SBD, and Al2O3is suitable for both600 V and 1200 V rate Ga2O3SBD. In addition, the comparison of Ga2O3SBDs between the SiC and GaN counterpart reveals that for Ga2O3, the breakdown voltage bottleneck is the dielectric. While, for SiC and GaN, the bottleneck is mainly the semiconductor itself.