Frontogenesis and Frontolysis of a Cold Filament Driven by the Cross-Filament Wind and Wave Fields Simulated by a Large Eddy Simulation

The variations of the frontogenetic trend of a cold filament induced by the cross-filament wind and wave fields are studied by a non-hydrostatic large eddy simulation. Five cases with different strengths of wind and wave fields are studied.The results show that the intense wind and wave fields further break the symmetries of submesoscale flow fields and suppress the levels of filament frontogenesis. The changes of secondary circulation directions—that is, the conversion between the convergence and divergence of the surface cross-filament currents with the downwelling and upwelling jets in the filament center—are associated with the inertial oscillation. The filament frontogenesis and frontolysis caused by the changes of secondary circulation directions may periodically sharpen and smooth the gradient of submesoscale flow fields.The lifecycle of the cold filament may include multiple stages of filament frontogenesis and frontolysis.

Simple procedure for assessing diffuse subarachnoid hemorrhage successfully created using filament perforation method in mice

The murine model of subarachnoid hemorrhage(SAH)is a valuable experimental tool for investigating molecular and cellular mechanisms,and the endovascular filament perforation technique can be used to simulate prominent pathophysiological features observed after human SAH;however,current validation methods for assessing an appropriate SAH model are limited.Here,we introduce a simple procedure for se-lecting a mouse model of diffuse SAH.SAH was induced in 24 mice using a standard filament perforation method.After confirming survival at 24 h,SAH was scored 0-1 based on T2*-weighted images on whole-brain magnetic resonance imaging(MRI)and visual surveillance of the cisterna magna(CM)through the dura mater.The CM-based SAH grading correlated well with a reference parameter defined by extracted brain(r^(2)=0.53,p<0.0001).The receiver operating characteristic curve revealed a sensi-tivity of 85%and a specificity of 91%for detecting diffuse SAH,with a similar area under the curve(0.89±0.06[standard error of the mean])as the MRI-based grading(0.72±0.10,p=0.12).Our data suggest that confirming an SAH clot in the CM is a valuable way to select a clinically relevant diffuse SAH model that can be used in future experimental studies.

Identification of Stability Domains for Flow Parameters in Fused Filament Fabrication Using Acoustic Emission

In Fused Filament Fabrication(FFF),the state of material flow significantly influences printing outcomes.However,online monitoring of these micro-physical processes within the extruder remains challenging.The flow state is affected by multiple parameters,with temperature and volumetric flow rate(VFR)being the most critical.The study explores the stable extrusion of flow with a highly sensitive acoustic emission(AE)sensor so that AE signals generated by the friction in the annular region can reflect the flow state more effectively.Nevertheless,the large volume and broad frequency range of the data present processing challenges.This study proposes a method that initially selects short impact signals and then uses the Fast Kurtogram(FK)to identify the frequency with the highest kurtosis for signal filtration.The results indicate that this approach significantly enhances processing speed and improves feature extraction capabilities.By correlating AE characteristics under various parameters with the quality of extruded raster beads,AE can monitor the real-time state of material flow.This study offers a concise and efficient method for monitoring the state of raster beads and demonstrates the potential of online monitoring of the flow states.

Strain-Rate Dependency of a Unidirectional Filament Wound Composite under Compression

This article presents the results of experimental studies concerning the dynamic deformation and failure of a unidirectional carbon fiber reinforced plastic(T700/LY113)under compression.The test samples were manufactured through the filament winding of flat plates.To establish the strain rate dependencies of the strength and elastic modulus of the material,dynamic tests were carried out using a drop tower,the Split Hopkinson Pressure Bar method,and standard static tests.The samples were loaded both along and perpendicular to the direction of the reinforcing fiber.The applicability of the obtained samples for static and dynamic tests was confirmed through finite elementmodeling and the high-speed imaging of the deformation and failure of samples during testing.As a result of the conducted experimental studies,static and dynamic stress-strain curves,time dependencies of deformation and the stress and strain rates of the samples during compression were obtained.Based on these results,the strain rate dependencies of the strength and elasticity modulus in the strain rate range of 0.001-6001/s are constructed.It is shown that the strain rate significantly affects the strength and deformation characteristics of the unidirectional carbon fiber composites under compression.An increase in the strain rate by 5 orders of magnitude increased the strength and elastic modulus along the fiber direction by 42%and 50%,respectively.Perpendicular loading resulted in a strength and elastic modulus increase by 58%and 50%,respectively.The average strength along the fibers at the largest studied strain rate was about 1000MPa.The obtained results can be used to design structural elements made of polymer composite materials operating under dynamic shock loads,as well as to build models of mechanical behavior and failure criteria of such materials,taking into account the strain rate effects.

Rapid Preparation of Filamentous Fungal DNA for PCR Analysis by Ultrasonic Treatment

A simple method to prepare of DNA template suitable for PCR amplification from filamentous fungi will be valuable for improving experimental efficiency.Here,a method was developed which just needed ultrasonic treatment of the mycelium at usual condition,and the produced solution could directly be used as DNA template for internal transcribed spacer(ITS)amplification successfully.The PCR could be improved by additional treatment of 60℃water baths,but was not centrifugation.When the template amount was 0.5-2μL and the ultrasonic time was 7-11 min,there was no distinctly influences on PCR.The method was commonly used for M.purpureus,I.cicadae,Lentinula sp.,Flammul sp.and Dictyophora sp.etc.to detect target sequences of ITS,hygromycin resistance gene(Hyg),CRISPR-associated protein 9(Cas9),Citrinin gene C(CtnC),Citrinin gene D(CtnD),large subunit rRNA gene(NL),and so on.The method could provide a simple,rapid,safe and economic approach to prepare the DNA template for large-scale PCR of the special filamentous fungi materials.

Development and Evaluation of Recycled Polypropylene and Bean Pod Powder Composite Biomaterial for Fused Filament Fabrication

Approximately 450 million tons of plastic and agricultural waste are produced each year in the world. Only a small portion of this plastic waste is recycled, and a small portion of this agricultural waste is used as fuel or fertilizer, and the rest of this waste is left in the environment or is burned, resulting in environmental and air pollution. For proper disposal, plastic and agricultural waste can be used in the manufacture of composites as raw materials. In this study, we had evaluated the use of bean pod powder (BPp) was used as natural reinforcing filler in recycled polypropylene (rPP) based composites. BPp/rPP composite filaments were developed using the extrusion method and the samples were printed by Fused Filament Fabrication (FFF). Composites with rPP matrix containing different weight fractions of BPp (5%, 10% and 15%) were fabricated to observe and compare the mechanical properties (tensile, flexural, and compressive strength) of the filament composites. In addition, the filament surface was analyzed for roughness and particle size of bean pod powder. The results established that BPp/rPP composites exhibited better tensile, flexural, and compressive strength than rPP and pure PP. By adding 5 wt% BPp, the tensile strength of rPP increased from 20.4 MPa to 22.8 MPa. The highest flexural strength (15.05 MPa) was obtained at 5 wt% BPp among all composites and the highest compressive strength (24.5 MPa), was obtained at 10 wt% BPp. Therefore, it can be concluded that by carefully selecting the ratio of BPp to bean pod powder, it is therefore possible to positively influence the mechanical properties of the resulting composite.

Study on the Presence of Filament Yarn in Jamdani Saree in Bangladesh

Jamdani weaving is one of the oldest heredities of Bangladesh. From the beginning 100% cotton yarn was used to produce high quality jamdani saree. The weavers were the finest with weaving skills. Higher yarn count yarns were used to weave the jamdani saree. In course of time at present manmade fibres are also used to produce jamdani saree. The use of filament yarn may have eased the manufacturing difficulties, but the jamdani saree is missing its originality without 100% cotton. In this project, random jamdani saree sample was collected to identify the fibre composition. Samples of filament were also collected from the manufacturer and tested. It was evident that instead of cotton yarn in warp and weft silk and polyester filament yarn were used.

The Kinematics Performance of Self-Propelled Full Freedom Filament in Wakes of Flow around Cylinder

In vortex streets, the kinematics performance of self-propelled full freedom filament is closely related to the length and the position of filaments in the flow field. In this paper, the changes of passive propulsion velocity and pressure of full-degree-of-freedom filaments after cylindrical wake were analyzed by 15 sets of experiments when the length and position of filaments were changed. The results show that the propulsive velocity of the filament, it approximately increases first and then decreases with the filament length increasing, and the further away from the center of the cylinder, the smaller the propulsive velocity of the filament. In addition, the longer the filament length and the further it is from the center of the cylinder, the lower the pressure around the filament. Experiments show that filaments without energy input can obtain energy from the surrounding flow field to maintain self-propelled motion. Studying the influence of length and position on the kinematics of filaments is helpful to provide a reference for revealing the hydrodynamic mechanism on passive propulsion process and developing low resistance energy harvesting device in swimming fish movement.

Recycled, Bio-Based, and Blended Composite Materials for 3D Printing Filament: Pros and Cons—A Review

In recent years, additive manufacturing (AM), known as “3D printing”, has experienced exceptional growth thanks to the development of mechatronics and materials science. Fused filament deposition (FDM) manufacturing is the most widely used technique in the field of AM, due to low operating and material costs. However, the materials commonly used for this technology are virgin thermoplastics. It is worth noting a considerable amount of waste exists due to failed print and disposable prototypes. In this regard, using green and sustainable materials is essential to limit the impact on the environment. The recycled, bio-based, and blended recycled materials are therefore a potential approach for 3D printing. In contrast, the lack of understanding of the mechanism of interlayer adhesion and the degradation of materials for FDM printing has posed a major challenge for these green materials. This paper provides an overview of the FDM technique and material requirements for 3D printing filaments. The main objective is to highlight the advantages and disadvantages of using recycled, bio-based, and blended materials based on thermoplastics for 3D printing filaments. In this work, solutions to improve the mechanical properties of 3D printing parts before, during, and after the printing process are pointed out. This paper provides an overview on choosing which materials and solutions depend on the specific application purposes. Moreover, research gaps and opportunities are mentioned in the discussion and conclusions sections of this study.

Equilibrium Energy and Entropy of Vortex Filaments in the Context of Tornadogenesis and Tornadic Flows

In this work, we study approximations of supercritical or suction vortices in tornadic flows and their contribution to tornadogenesis and tornado maintenance using self-avoiding walks on a cubic lattice. We extend the previous work on turbulence by A. Chorin and collaborators to approximate the statistical equilibrium quantities of vortex filaments on a cubic lattice when both an energy and a statistical temperature are involved. Our results confirm that supercritical (smooth, “straight”) vortices have the highest average energy and correspond to negative temperatures in this model. The lowest-energy configurations are folded up and “balled up” to a great extent. The results support A. Chorin’s findings that, in the context of supercritical vortices in a tornadic flow, when such high-energy vortices stretch, they need to fold and transfer energy to the surrounding flow, contributing to tornado maintenance or leading to its genesis. The computations are performed using a Markov Chain Monte Carlo approach with a simple sampling algorithm using local transformations that allow the results to be reliable over a wide range of statistical temperatures, unlike the originally used pivot algorithm that only performs well near infinite temperatures. Efficient ways to compute entropy are discussed and show that a system with supercritical vortices will increase entropy by having these vortices fold and transfer their energy to the surrounding flow.

Optimization of Extrusion Process Parameters of Recycled High-Density Polyethylene-Thermoplastic Starch Composite for Fused Filament Fabrication

High-density poly-ethylene (HDPE) is a nonbiodegradable recyclable plastic which is widely utilized in single use packaging applications. Consequently, it constitutes a significant amount of plastic waste found in landfills. From literature, it has been shown that parts produced using composites of HDPE with carbohydrate-based polymers, such as thermoplastic starch (TPS), experience mechanical degradation through hydrolytic degradation process. The possible utilization of recycled-HDPE (rHDPE) and TPS composite in nonconventional manufacturing processes such as Fused filament fabrication (FFF) has however not been explored. This study explores the potential application of rHDPE and TPS composites in FFF and optimizes the extrusion process parameters used in rHDPE-TPS filament production process. Taguchi method was utilized to analyze the extrusion process. The extrusion process parameters studied were the spooling speed, extrusion speed and the extrusion temperatures. The response variable studied was the filament diameter. In this research, the maximum TPS content achieved during filament production was 40 wt%. This filament was however challenging to use in FFF printers due to frequent nozzle clogging. Printing was therefore done with filaments that contained 0 - 30 wt% TPS. The experimental results showed that the most significant parameter in extrusion process was the spooling speed, followed by extrusion speed. Extrusion temperature had the least significant influence on the filament diameter. It was observed that increase in TPS content resulted in reduced warping and increased rate of hydrolytic degradation. Mechanical properties of printed parts were investigated and the results showed that increasing TPS content resulted in reduction in tensile strength, reduction in compression strength and increase in stiffness. The findings of this research provide valuable insights to plastic recycling industries and researchers regarding the utilization of recycled HDPE and TPS composites as substitute materials in FFF.

Diversity of filamentous fungi in organic layers of two forests in Zijin Mountain

A study was conducted to evaluate the cultivable filamentous fungal diversity in organic layers (L, F, and H layers) and A1 layer of two main forest types, Pinus massoniana and Liguidambar formasana mixed forest and Quercus variabilis forest, in Zijin Mountain(325?N, 11848?E), Nanjing, China. A total of 67 taxa comprising 56 Deuteromycetes, 3 Zygomycetes, 5 Asco-mycetes and 3 unidentified fungi were recognized from samples from the forest floor of the two forest types. The most abundant group was Deuteromycetes. The dominant genera in both forests were Alternaria sp., Aspergillus sp., Cladosporium sp., Mucor sp., Penicillium sp., Rhizopus sp., Gliocladium sp. and Trichoderma spp. The fungal diversity was higher in the mixed forest than that in Q. variabilis forest. For both forest types, the maximum fungal diversity was found in layer F and there existed significantly different in fungal diversity between layer F and layer L. In the mixed forest, richness of fungi isolated from needle litter (P. massoniana) was lower than that from leaf litter (L. formasana). The richness of fungi from needle litter increased with the in-crease of forest floor depth, but for leaf litter, the fungal diversity decreased with the depth of forest floor. The co-species of fungi from the two forest types, as well as from two kinds of litters in mixed forest, increased with the depth of the forest floor. The succession of fungi along with the process of decomposition was discussed here. The results also showed that litter quality was a critical factor affecting fungal diversity.

GENETIC OPTIMIZATION OF HOT FILAMENT PARAMETERS IN HFCVD SYSTEM

In HFCVD system the substrate temperature is a key factor which deeply affects the quality of diamond films. Th e magnitude and the variation of the substrate temperature must be limited in a suitable range to deposit diamond films of uniform thickness over large areas. In this paper, the hot filament parameters are investigated on the basi s of GAs to realize a good substrate temperature profile. Computer simulations d emonstrate that on parameters optimized by GAs a uniform substrate temperatur e field can be formed over a relatively large circle area with R s=10 cm.

Study on Limited Filamentous Sludge Bulking Test in A/O Activated Sludge Process

[Objective] This study aimed to make use of the limited filamentous sludge bulking characteristics to purify water quality and save energy. [Method] The effects of dissolved oxygen （DO） on sludge bulking were explored by changing the DO con- centration in the aerobiotic pool of NO system from the low load （0.25 kg COD/（kg MLSS.d）） and the medium to high load （0.55 kgCOD/（kg MLSSod））. [Result] In the NO activated sludge system, when the sludge load was 0.25 kg COD/（kg MLSS.d）, DO=1.5 mg/L, the sludge index was at around 250, while when the sludge load- ing was 0.55 kg COD/（kg MLSS.d）, DO=1.5 mg/L, the sludge index was close to 300, occurring the limited filamentous bulking. The bulked sludge still showed high removal rates to COD, SS, nitrogen and phosphorus. [Conclusion] It could improve the oxygen transfer rate and reduce the aeration rate at low DO conditions to achieve energy-saving.

Preliminary Investigation on a Sheet Plasma Produced by a Single Hot-Filament Cathode Discharge

A sheet plasma is generated by a mesh anode and a single hot-filament cathode with a DC power supply, and its characteristics are experimentally investigated. The sheet plasma is observed to locate around the anode. Both electron density and electron temperature derived from the average energy of the energetic electrons in nitrogen are estimated to be 10s cm^-3 and 20- 40 eV, respectively, using the optical emission spectroscopy （OES） method based on a kinetic model of low-pressure nitrogen discharge. The electron density, electron temperature and their spatial distributions are found to be affected by the supplying voltage on the anode（70 V to 300 V）, filament temperature （600℃ to 780℃） and gas pressure （2 Pa to 20 Pa）. By adjusting these parameters the discharge status can be easily controlled.

Study of Blended Antistatic PET Filament

From the effects of the composition of the three kinds ofblended systems, the antistatic agent content and theblending methods on the spinnability, the antistatic prop-erty, and the wash fastness of PET filament, it is foundthat the antistatic behavior of the (PET) - (PEG) -(SDBS) - stearate quaternary system is improved greatlydue to the synergefic effect of the combined antistaticagents and the volume resistivity of the fiber made.Thereof reaches 10~8 ～ 10~9Ω·cm after being washed 20 tines in saponaceous water at 40℃. Its spinnability anddrawing behavior are good. The effect of the antistaticagent content on the mechanical property of PET fila-ment is also studied.

Nuclear lamina-like filaments and nuclear matrix in Allium cepa as revealed by scanning electron microscopy

In this study, freeze - fractured specimens of Allium cepa root tip meristems were examined under the scanning electron microscope (SEM). This technique permitted the visualization of the outer membrane of the nuclear envelope with nuclear pore complexes and polyribosomes. Some of the cell nuclei prepared with this procedure had fissures of various widths on their nuclear envelopes through which the nuclear lamina-like filaments (LLF) underneath the nucleoplasmic side of the envelopes were clearly visible. The diameters of these filaments varied between 25 and 125 nm. Many of the LLFs showed granular thickenings at places, and were attached to the inner surface of nuclear envelope in some regions. Similar LLFs were also seen at the peripheries of the freeze -fractured faces of nuclei. Meanwhile,the spatial relation between the nuclear matrix filaments (NMF) and other nuclear structures (nucleoli, chromatin and peripheral lamina - like filaments) was revealed in these fractured preparations. In addition, the methods and techniques in studying the nuclear lamina morphology and the roles played by NMFs in activities of various nuclear structures were discussed in brief.

基于“丝智活动”(Filamentality)的教育技术公共课教学设计应用实践

目前教育技术公共课已被国内广大教师接受且应用于教学活动中,基于简单易学的Filamentality进行教育技术公共课教学设计使教师将精力集中于对教学的设计。介绍如何应用Filamentality进行教育技术公共课教学设计,以提高教学效果。

Granulation of filamentous microorganisms in a sequencing batch reactor with saline wastewater

Proliferation of filamentous microorganisms frequently leads to operational failure for activate sludge systems. In this study, it was found that filamentous microorganisms could grow in compact granular structure with 5% sodium chloride in the substrate. In the early period of experiment, coccoid and rode-like bacteria predominated in the yellowish-brown granules, and later the white and the black granules were developed by filamentous microorganisms. The filamentous granules exhibited low porosity and fast settling velocity, and were more compact even than bacteria granules. It was hypothesized that the elevated pH in the later period might be a possible reason for the compact growth of filamentous granules. However, the bacteria granules showed the high bioactivity in terms of specific oxygen utilizing rate, and comprised of a wider diversity of compounds based on the thermogravimetric evaluation. The findings in this study demonstrated that filamentous microbes could form compact granular structure, which may encourage the utilization of filamentous microorganisms rather than the inhibition of their growth, as the latter is frequently used for sludge bulking control.

Approaches to functional genomics in filamentous fungi

The study of gene function in filamentous fungi is a field of research that has made great advances in very recent years. A number of transformation and gene manipulation strategies have been developed and applied to a diverse and rapidly expanding list of economically important filamentous fungi and oomycetes. With the significant number of fungal genomes now sequenced or being sequenced, functional genomics promises to uncover a great deal of new information in coming years. This review discusses recent advances that have been made in examining gene function in filamentous fungi and describes the advantages and limitations of the different approaches.