Performance of Nonwoven Filter Materials Based on the Operating Condition

The practical condition of needle-punched filters applied in coal-fired power plants is investigated. According to the actual operating conditions, two common filters (glass fiber filter and polyphenylene sulfide (PPS) filter) are selected for experiment. The performance of these two kinds of filter is compared based on a series of tests such as resistance to the acid and alkali, oxidation resistance,hydrolysis resistance,and wear resistance. Experimental results show that PPS filter materials have better properties than those of glass filter material except oxidation resistance. Composite filter mixed glass fiber and PPS is recommended for polluters because of its good properties in all aspects.

Clean Steel Technologies Based on Interactions of Refractory Filtering Materials with Steel Melt

New carbon bonded filters with “active and reactive coatings ” for higher filtration efficiency of alumina based inclusions as well as nano-engineered filters with nano-scaled additives are explored with the aid of impingement tests and are evaluated according to their cold crushing strengths at room temperature. The combination of carbon nanotubes and alumina nanosheets additives leads to in situ formation of Al3 CON. Both the nanoscaled additives as well as the extra alumina “active”coating lead to improved mechanical performance of the carbon bonded filters and open the horizon for filter macrostructures with higher filtration capacities in means of bigger dimensions. In a further step MWCNT（ multi walled carbon nanotubes） in combination with a synthetic pitch have been used as a functional coating on the surface of alumina carbon bonded filters. These filters have then been evaluated also with uncoated filters in a special casting simulator and the interactions between steel and filtering material have been investigated.

Preparation and Physical Properties of Ceramsite Filter Media for Water Treatment Obtained from Municipal Solid Wastes

Sludge,solid waste of sewage treatment plants,poses a threat as a secondary pollution if it is not handled properly.In this study,artifical ceramsite filter material(ACFM)for water treatment,was obtained from sludge by high-temperature sintering process,and then it’s physical properties,leaching toxicity and sintering mechanisms were investigated.The results showed that the preferred conditions for the preparation of ACFM were that the mass ratio of sludge,river sediment and fly ash was 5∶4∶1,preheated at 400℃for 20 min and sintered at 1 150℃for 5 min.After the optimal sintering conditions treatment,the physical properties of the rate of breaking and wear,solubility in hydrochloric acid,silt carrying capacity,void fraction and Brunauer-Emmett-Teller(BET)specific surface area of ACFM were 0.2%,0.01%,0.2%,71.1%and 0.75×104cm2/g,respectively.The results confirmed that the ACFM’s physical properties were totally aligned to the requirements of China’s industry standard(CJ/T 299—2008).The leaching toxicity results indicated that the leaching contents of heavy metals,such as Cr,Zn and Cu,were much lower than the thresholds of China’s national standards(GB 5085.3—2007 and GB 8978—1996).

Tunable wavelength filters using polymer long-period waveguide gratings based on metal-cladding directly defined technique

In this work, long-period waveguide grating-based tunable wavelength filters using organic–inorganic grafting poly（methyl methacrylate）（PMMA） materials are designed and fabricated by metal-cladding directly defined technique.The thermal stabilities and optical properties of the organic–inorganic grafting PMMA core materials are analyzed. Structures and performance parameters of the waveguide gratings and self-electrode heaters are designed and simulated. The contrast of the filter is about 15 d B and the resonant wavelength can be tuned by different electric powers applied to the metal-cladding self-electrode heaters. The temperature sensitivity is 3.5 nm/℃ and the switching time is about 1 ms. The technique is very suitable for realizing the optoelectronic integrated wavelength-division-multiplexing systems.

Monte Carlo simulations for 20 MV X-ray spectrum reconstruction of a linear induction accelerator

To study the spectrum reconstruction of the 20 MV X-ray generated by the Dragon-I linear induction accelerator, the Monte Carlo method is applied to simulate the attenuations of the X-ray in the attenuators of different thicknesses and thus provide the transmission data. As is known, the spectrum estimation from transmission data is an ill-conditioned problem. The method based on iterative perturbations is employed to derive the X-ray spectra, where initial guesses are used to start the process. This algorithm takes into account not only the minimization of the differences between the measured and the calculated transmissions but also the smoothness feature of the spectrum function. In this work, various filter materials are put to use as the attenuator, and the condition for an accurate and robust solution of the X-ray spectrum calculation is demonstrated. The influences of the scattering photons within different intervals of emergence angle on the X-ray spectrum reconstruction are also analyzed.