This paper deals with the operation principle of the cyclonic microbubble flotation column and its structure characterisics. The pilot test results and the commercial applied results of cyclonic microbubble flotation ...This paper deals with the operation principle of the cyclonic microbubble flotation column and its structure characterisics. The pilot test results and the commercial applied results of cyclonic microbubble flotation column for fine coal processing are also introduced. The test results proved that the cyclonic microbubble flotation column has many advantages suck as high selectivity, high efficiency in ash rejection from fine coals, low comsumption of energy, easy operation and maintenance, etc. It is a kind of equipment widely applied to fine coal processing.展开更多
The flotation process is a particle-hydrophobic surface-based separation technique. To improve the essential flotation steps of collision and attachment probabilities, and reduce the step of detachment probabilities b...The flotation process is a particle-hydrophobic surface-based separation technique. To improve the essential flotation steps of collision and attachment probabilities, and reduce the step of detachment probabilities between air bubbles and hydrophobic particles, a selectively designed cavitation venturi tube combined with a static mixer can be used to generate very high numbers of pico and nano bubbles in a flotation column. Fully embraced by those high numbers of tiny bubbles, hydrophobic particles readily attract the tiny bubbles to their surfaces. The results of column flotation of Pittsburgh No. 8 seam coal are obtained in a 5.08 cm ID and 162 cm height flotation column equipped with a static mixer and cavitation venturi tube, using kerosene as collector and MIBC as frother. Design of the experimental procedure is combined with a statistical two-stepwise analysis to determine the optimal operating conditions for maximum recovery at a specified grade. The effect of independent variables on the responses has been explained. Combustible material recovery of 85–90% at clean coal product of 10–11% ash is obtained from feed of 29.6% ash, with a much-reduced amount of frother and collector than that used in conventional column flotation. The column flotation process utilizing pico and nano bubbles can also be extended to the lower limit and upper limit of particle size ranges, minus 75 lm and 300–600 lm, respectively, for better recovery.展开更多
A new type of device,a dissolved-air flotation column,was developed for separation of oily wastewater. The unique design idea of the dissolved-air flotation column is the combined use of dissolved-air flotation and co...A new type of device,a dissolved-air flotation column,was developed for separation of oily wastewater. The unique design idea of the dissolved-air flotation column is the combined use of dissolved-air flotation and column flotation. The dissolved air release occurred within the column separation system. As a potential application the column was investigated for its performance in separating emulsified oil droplets in oily wastewater. A high separation efficiency was obtained in a series of tests. The aeration performance of the bubble generator used in the dissolved-air flotation column was also studied in particular.展开更多
Hydrodynamic cavitaion venturi tube technique is used for pico and nano bubble generations in coal column flotation. In order to determine the optimal design of hydrodynamic cavitation venture tube for pico and nano b...Hydrodynamic cavitaion venturi tube technique is used for pico and nano bubble generations in coal column flotation. In order to determine the optimal design of hydrodynamic cavitation venture tube for pico and nano bubble generation, a four-factor three-level Central Composite Design of Experimental was conducted for investigating four important design parameters of cavitation venturi tube governing the median size and the volume of pico and nano bubbles. The test results showed that maximum volume of pico and nano bubbles, 65–75%, and minimum mean pico and nano bubble size,150–240 nm, were achieved at the medium ratio of the diameter of outlet of the venturi-tube and diameter of throat(3–4), medium outlet angle(11–13°), high inlet angle(26–27°) and high ratio of the length of the throat and the diameter of throat(2.3–3). Study the effects of the producing pico and nano bubbles on fine coal flotation was performed in a 5 cm diameter 260 cm height flotation column. The optimal percentage of pico and nano bubbles was about 70%, which produced maximum combustible material recovery of 86% with clean coal ash content of 11.7%.展开更多
文摘This paper deals with the operation principle of the cyclonic microbubble flotation column and its structure characterisics. The pilot test results and the commercial applied results of cyclonic microbubble flotation column for fine coal processing are also introduced. The test results proved that the cyclonic microbubble flotation column has many advantages suck as high selectivity, high efficiency in ash rejection from fine coals, low comsumption of energy, easy operation and maintenance, etc. It is a kind of equipment widely applied to fine coal processing.
基金provided by West Virginia State Coal and Energy Research Bureau (CERB)the Department of Mining Engineering,West Virginia University
文摘The flotation process is a particle-hydrophobic surface-based separation technique. To improve the essential flotation steps of collision and attachment probabilities, and reduce the step of detachment probabilities between air bubbles and hydrophobic particles, a selectively designed cavitation venturi tube combined with a static mixer can be used to generate very high numbers of pico and nano bubbles in a flotation column. Fully embraced by those high numbers of tiny bubbles, hydrophobic particles readily attract the tiny bubbles to their surfaces. The results of column flotation of Pittsburgh No. 8 seam coal are obtained in a 5.08 cm ID and 162 cm height flotation column equipped with a static mixer and cavitation venturi tube, using kerosene as collector and MIBC as frother. Design of the experimental procedure is combined with a statistical two-stepwise analysis to determine the optimal operating conditions for maximum recovery at a specified grade. The effect of independent variables on the responses has been explained. Combustible material recovery of 85–90% at clean coal product of 10–11% ash is obtained from feed of 29.6% ash, with a much-reduced amount of frother and collector than that used in conventional column flotation. The column flotation process utilizing pico and nano bubbles can also be extended to the lower limit and upper limit of particle size ranges, minus 75 lm and 300–600 lm, respectively, for better recovery.
基金Projects 50425414 supported by thte National Fund for Distinguished Young Scholars2006A019 by the Science and Technology Fund of China University of Mining &Technology
文摘A new type of device,a dissolved-air flotation column,was developed for separation of oily wastewater. The unique design idea of the dissolved-air flotation column is the combined use of dissolved-air flotation and column flotation. The dissolved air release occurred within the column separation system. As a potential application the column was investigated for its performance in separating emulsified oil droplets in oily wastewater. A high separation efficiency was obtained in a series of tests. The aeration performance of the bubble generator used in the dissolved-air flotation column was also studied in particular.
基金West Virginia State Coal and Energy Research Bureau(WVCERB)the Department of Mining Engineering,West Virginia University
文摘Hydrodynamic cavitaion venturi tube technique is used for pico and nano bubble generations in coal column flotation. In order to determine the optimal design of hydrodynamic cavitation venture tube for pico and nano bubble generation, a four-factor three-level Central Composite Design of Experimental was conducted for investigating four important design parameters of cavitation venturi tube governing the median size and the volume of pico and nano bubbles. The test results showed that maximum volume of pico and nano bubbles, 65–75%, and minimum mean pico and nano bubble size,150–240 nm, were achieved at the medium ratio of the diameter of outlet of the venturi-tube and diameter of throat(3–4), medium outlet angle(11–13°), high inlet angle(26–27°) and high ratio of the length of the throat and the diameter of throat(2.3–3). Study the effects of the producing pico and nano bubbles on fine coal flotation was performed in a 5 cm diameter 260 cm height flotation column. The optimal percentage of pico and nano bubbles was about 70%, which produced maximum combustible material recovery of 86% with clean coal ash content of 11.7%.
