Collision and attachment behavior between fine cassiterite particles and H_2 bubbles

Particle-bubble interaction during electro-flotation of cassiterite was investigated by determining the recovery of cassiterite and the collision mechanism of cassiterite particle and H2 bubble. Flotation tests at different conditions were conducted in a single bubble flotation cell. The recovery of cassiterite was found to be affected by cassiterite particle and bubble size. A matching range, in which the best recovery can be obtained, was found between particle and bubble size. Collision, attachment, and detachment of the particle-bubble were observed and captured by a high-speed camera. Particle-bubble collision and attachment were analyzed with the use of particle-bubble interaction theory to obtain the experimental results. An attachment model was introduced and verified through the photos captured by the high-speed camera. A bridge role was observed between the bubbles and particles. Particle-bubble interaction was found to be affected by bubble size and particle size, which significantly influenced not only the collision and attachment behavior of the particles and bubbles but also the flotation recovery of fine cassiterite particles.

Effects of supersonic fine particles bombarding on thermal barrier coatings after isothermal oxidation

This work was attempted to modify the current technology for thermal barrier coatings（TBCs） by adding an additional step of surface modification,namely,supersonic fine particles bombarding（SFPB） process,on bond coat before applying the topcoat.After isothermal oxidation at 1000 °C for different time,the surface state of the bond coat and its phase transformation were investigated using X-ray diffraction（XRD）,scanning electron microscopy（SEM） equipped with energy-dispersive X-ray spectrometry（EDS）,transmission electron microscopy（TEM） and Cr3＋ luminescence spectroscopy.The dislocation density significantly increases after SFPB process,which can generate a large number of diffusion channels in the area of the surface of the bond coat.At the initial stage of isothermal oxidation,the diffusion velocity of Al in the bond coat significantly increases,leading to the formation of a layer of stable α-Al2O3 phase.A great number of Cr3＋ positive ions can diffuse via diffusion channels during the transient state of isothermal oxidation,which can lead to the presence of（Al0.9Cr0.1）2O3 phase and accelerate the γ→θ→α phase transformation.Cr3＋ luminescence spectroscopy measurement shows that the residual stress increases at the initial stage of isothermal oxidation and then decreases.The residual stress after isothermal oxidation for 310 h reduces to 0.63 GPa compared with 0.93 GPa after isothermal oxidation for 26 h.In order to prolong the lifespan of TBCs,a layer of continuous,dense and pure α-Al2O3 with high oxidation resistance at the interface between topcoat and bond coat can be obtained due to additional SFPB process.

Diurnal variation of number concentration and size distribution of ultrafine particles in the urban atmosphere of Beijing in winter

Number concentration and distribution of airborne particles in the size range 5.6 to 560 nm diameter were measured in Beijing for a 15-d period in winter 2005. Dally average number concentrations of nucleation mode （5.6-20 um）, Aitken mode （20-100 um）, and accumulation mode （100-560 um） particles, and total particles were 17500, 32000, 4000, and 53500 cm^-3, respectively. Average particle size distribution was monomodal with a mode diameter of about 40 um at night and bimodal with mode diameters of about 10 and about 40 um during the daytime. New particle formation events, which were connected to diurnal variation of nucleation mode particles, were observed in more than half of the observation days. The events often started around 10：00-11：00 Chinese Standard Time （CST） and ended up after 3-4 h. Concentrations of Aitken and accumulation mode particles increased from midnight and reached their maxima at about 10：00 CST, and then decreased and became the lowest in the afternoon. Analysis of diurnal cycles in traffic volume and meteorological parameters revealed that the accumulation of the particles in Aitken and accumulation modes in the morning was influenced by formation of an inversion and increase in vehicle emission, and dispersion of such particles in the afternoon was associated with more effective vertical mixing and higher wind speed.

Chemical composition and quantitative relationship between meteorological condition and fine particles in Beijing

The recent year's monitor results of Beijing indicated that the pollution level of fine particles PM 2.5 showed an increasing trend. To understand pollution characteristics of PM 2.5 and its relationship with the meteorological conditions in Beijing, a one-year monitoring of PM 2.5 mass concentration and correspondent meteorological parameters was performed in Beijing in 2001. The PM 2.5 levels in Beijing were very high, the annual average PM 2.5 concentration in 2001 was 7 times of the National Ambient Air Quality Standards proposed by US EPA. The major chemical compositions were organics, sulfate, crustals and nitrate. It was found that the mass concentrations of PM 2.5 were influenced by meteorological conditions. The correlation between the mass concentrations of PM 2.5 and the relative humidity was found. And the correlation became closer at higher relative humidity. And the mass concentrations of PM 2.5 were negtive-correlated to wind speeds, but the correlation between the mass concentration of PM 2.5 and wind speed was not good at stronger wind.

Nano-microbubble flotation of fine and ultrafine chalcopyrite particles

As is well known to mineral processing scientists and engineers, fine and ultrafine particles are difficult to float mainly due to the low bubble-particle collision efficiencies. Though many efforts have been made to improve flotation performance of fine and ultrafine particles, there is still much more to be done. In this paper, the effects of nano-microbubbles （nanobuhbles and microbubbles） on the flotation of fine （-38 ＋ 14.36 μm） and ultrafine （-14.36 ＋ 5μm） chalcopyrite particles were investigated in a laboratory scale Denver flotation cell. Nano-microbubbles were generated using a specially-designed nano- microbubble generator based on the cavitation phenomenon in Venturi tubes. In order to better under- stand the mechanisms of nano-microbubble enhanced froth flotation of fine and ultrafine chalcopyrite particles, the nano-microbubble size distribution, stability and the effect of frother concentration on nano- bubble size were also studied by a laser diffraction method. Comparative flotation tests were performed in the presence and absence of nano-microbubbles to evaluate their impact on the fine and ultrafine chalcopyrite particle flotation recovery. According to the results, the mean size of nano-microbubbles increased over time, and decreased with increase of frother concentration. The laboratory-scale flotation test results indicated that flotation recovery of chalcopyrite fine and ultrafine particles increased by approximately 16-21% in the presence of nano-microbubbles, depending on operating conditions of the process. The presence of nano-microbubbles increased the recovery of ultrafine particles （-14.36 ＋ 5 μm） more than that of fine particles （-38 ＋ 14.36 μm）. Another major advantage is that the use of nano-microbubbles reduced the collector and frother consumptions by up to 75% and 50%, respectively.

Preparation of Fine Spherical Particle Sized Ceria by Precipitation Method with Ammonium Bicarbonate

Fine spherical particle sized ceria (CeO_2) was prepared by homogeneous precipitation method with ammonium bicarbonate as precipitant. The prepared CeO_2 has the primary particle size of 10～50 nm when calcined between 400～700 ℃ analyzed by XRD and the aggregated particle size is about 300 nm measured by LASER particle sizer. SEM, TG-DTA and Zeta-potential analyzer were employed individually to study the morphology and the formation of CeO_2 product. It was found that excess NH_4NO_3 can serve as an sphericallization agent to prepare spherical CeO_2 powder by precipitation method.

Monitoring of Pollution of Air Fine Particles (PM2.5) and Study on Their Genetic Toxicity

Objective To compare PM2.5 pollation level between the city of coal-fuel pollution (Taiyuan) and the city of pollution mixed with coal fuels and vehicle exhausts (Beijing), to analyze the concentration of B[a]p and Pb in the pollutants, and to study the DNA damage by PM2.5. Methods Air fine particles (PM2.5) were collected in Beijing and Taiyuan by means of the filter membrane method, the concentration of B[a]p and Pb were analyzed by high performance liquid chromatography and atomic absorption spectroscopy respectveily, and the damage of DNA by PM2.5 was detected by single cell gel-electrophoresis (SCGE) using the human lung epithelial cells (A549) as target cells. Results The concentration of PM2.5 in the winter of Beijing was 0.028-0.436 mg/m3, and that in Taiyuan was 0.132-0.681 mg/m3. The concentration of B[a]p was 0.104 and 0.156 礸/mg on PM2.5 of Beijing and Taiyuan, respectively, whereas the concentration of Pb was 1.094 and 1.137 礸/mg on PM2.5 of Beijing and Taiyuan, respectively. Exposure to PM2.5 at the concentrations of 5, 50, and 200 礸/mL for 12 h and 24 h caused DNA damage of the human alveolar epithelium, and the ratios of the tailing and length of the tail were all significantly different from those of the negative control group (P<0.05), and indicated a dose-response relationship. Conclusion PM2.5 has certain genetic toxicity.

Growth Rates of Fine Aerosol Particles at a Site near Beijing in June 2013

Growth of fine aerosol particles is investigated during the Aerosol-CCN-Cloud Closure Experiment campaign in June 2013 at an urban site near Beijing. Analyses show a high frequency （- 50%） of fine aerosol particle growth events, and show that the growth rates range from 2.1 to 6.5 nm h-1 with a mean value of - 5.1 nm h-1. A review of previous studies indicates that at least four mechanisms can affect the growth of fine aerosol particles： vapor condensation, intramodal coagulation, extramodal coagulation, and multi-phase chemical reaction. At the initial stage of fine aerosol particle growth, condensational growth usually plays a major role and coagulation efficiency generally increases with particle sizes. An overview of previous studies shows higher growth rates over megacity, urban and boreal forest regions than over rural and oceanic regions. This is most likely due to the higher condensational vapor, which can cause strong condensational growth of fine aerosol particles. Associated with these multiple factors of influence, there are large uncertainties for the aerosol particle growth rates, even at the same location.

Ferronickel enrichment by fine particle reduction and magnetic separation from nickel laterite ore

Ferronickel enrichment and extraction from nickel laterite ore were studied through reduction and magnetic separation. Reduction experiments were performed using hydrogen and carbon monoxide as reductants at different temperatures （700-1000℃）. Magnetic separa- tion of the reduced products was conducted using a SLon-100 cycle pulsating magnetic separator （1.2 T）. Composition analysis indicates that the nickel laterite ore contains a total iron content of 22.50wt% and a total nickel content of 1.91wt%. Its mineral composition mainly con- sists of serpentine, hortonolite, and goethite. During the reduction process, the grade of nickel and iron in the products increases with in- creasing reduction temperature. Although a higher temperature is more favorable for reduction, the temperature exceeding 1000℃ results in sintering of the products, preventing magnetic separation. After magnetic separation, the maximum total nickel and iron concentrations are 5.43wt% and 56.86wt%, and the corresponding recovery rates are 84.38% and 53.76%, respectively.

Synthesis and Luminescence Properties of Pr^(3+) Doped Ca_xBa_(1-x)TiO_3 (0.3≤x<1) Fine Particles

CaxBa1-xTiO3 （CBT） fine particles doped with red luminescence center of Pr3＋ ions （Pr： CBT） were successfully synthesized by salt assisted spray pyrolysis （SASP） process. Scanning electronic microscope （SEM） and laser scattering analysis demonstrate that salt can be removed from the surface of particles by washing with Milli-Q water and the particles can be further separated by ball-milling to get well-dispersed Pr^3＋ ions doped CBT fine particles. The luminescence properties, such as photoluminescence （PL） and mechanoluminescence （ML）, of as-synthesized Pr： CBT particles were investigated. For Pr： CBT fine particles with different Ca molar ratios, all the samples show one emission at 612 nm, with increasing Ca molar ratio, PL intensity of Pr： CBT fine particles become stronger and stronger. When pressure was loaded on the Pr： CBT pellet, mechanoluminescence（ML） emission was measured. The results show that the ML intensity is proportional to the applied pressure.

Effect of Supersonic Fine Particles Bombarding on the Service Life of Thermal Barrier Coating

Thermally Grown Oxide（TGO） is a dominating component in controlling the effectiveness of thermal barrier coating.During the growth of TGO,whether we could homogeneously distribute Al atom on the TGO and the intermediate metal layer will be the key factor in forming TGO with continuous,uniform and single-ingredient（Al2O3）.In this experiment,we bombarded particles on to the metallic bound layer.We studied the influence of supersonic particle bombardment on the diffusion of Al.We hope to control the growth of TGO by monitoring the diffusion of Al.Thermal barrier coating（TBC）,which consists of a NiCoCrAlY bond coat and a ZrO2-8Y2O3（wt.%） topcoat（TC）,is fabricated on the nickel-base superalloy by air plasma spray（APS）.NiCoCrAlY bond coat is treated by supersonic fine particles bombarding（SFPB）.The morphology,oxidation behavior of TBC and phase are characterized by scanning electron microscope（SEM） equipped with an energy dispersive spectromrter（EDS） and X-ray diffractometer（XRD）.The influence of supersonic fine particles bombarding technique on the service life of thermal barrier coating is studied.The results show that SFPB technique improves the flaw of excessive surface undulation in the as-sprayed bond coat.A continuous,uniform and single-ingredient（Al2O3） TGO can quickly form in the SFPB TBC during high temperature oxidation process.The thickening of TGO is relatively slow.These will effectively suppress the formation of other non-protective oxides.Therefore,SFPB technique reduces the growth stress level generated by the continuous growth of TGO,and also avoids the stress concentration induced by formation of the large particle spinal oxide.Thermal barrier coating still remains well after 350 thermal cycles.The service life of TBC is improved.The proposed research provides theoretical basis and technical references to further improve and enhance the SFPB technique.

Estimation of Fine Dust Particles Distribution in Machining Workshop Based on COwZ Model

Fine dust particles （diameter is less than 2.5 μm） generated during machining processes,especially dry cutting,are harmful to operators,because they remain suspended in the air for long time and have marked concentration gradients in workshop.Hence studies about cutting dust source states and indoor air quality prediction have been developed.However,few researches focus on the distribution state of the cutting dust,dynamic status of fine dust particles,and environment estimating of the machining workshop.The machining workshops have diversified architectural structures,complex working conditions,so the dust emission is sensitive dynamic.According to these features,after analysis of the static and dynamic influence factors,this paper proposes a method and establishes a model to estimate the fine dust particles distribution based on COwZ （COMIS （conjunction of multizone infiltration specialists） with sub-zones） model when only dry cutting is processed just needing various working parameters.And two key technologies are discussed：the description of the machine tools using sub-zones of COwZ model considering the local obstacle effects of machine tools themselves;description and implementation of dynamic process of cutting dust emission with a new concept of equivalent source strengths.At last,multi-point experiments in a hybrid ventilation machining workshop prove the method is practical.Good agreement was observed between the estimation results and the experimental measurements for the investigated conditions.The proposed method can supply reference data for green manufacturing.

Effects of supersonic fine particle bombarding on thermal cyclic failure lifetime of thermal barrier coating

Thermal barrier coating ( TBC) consisting of a NiCoCrAlY bond coat ( BC) and a ZrO2-8 wt. % Y2O3 topcoat ( TC) was fabricated on the nickel-base superalloy by air plasma spray ( APS) . The BC was treated by supersonic fine particle bombarding ( SFPB) . Thermal cyclic failure and residual stress in thermally grown oxide ( TGO) scale were studied by SEM with EDS and ruby fluorescence spectroscopy ( RFS) . As shown in the results,after treated by SFPB,thickening of TGO was relatively slow,which reduced the level of growth stress. The TBC with SFPB treatment was still remained well undergoing 350 times of thermal cycle. However,after thermal cycle with the same times,the separation of TC was observed in TBC without SFPB treatment. The residual stress analysis by RFS showed that the residual stress of SFPB-treated TBC increased with the increasing number of thermal cycle. The residual stress of conventional TBC reached a value of 650 MPa at 350 times of cycle and that of SFPB-treated TBC only reached 532 MPa at 400 times of cycle. The BC with SFPB treatment after 400 times of cycle was analyzed by RFS,the high stress value was not observed in local thickened region of TGO. Thermal cycling resistance of TBC can be improved by the SFPB technology.

Concentration Characteristics and Sources of Chemical Elements in Atmospheric Fine Particles (PM_(2.5)) in Autumn in Xi'an City

[Objective] The aim was to study the concentration characteristics and sources of chemical elements in atmospheric fine particles (PM2.5) in autumn in Xi’an City. [Method] By means of mini-volume sampler, PM2.5 samples in atmosphere in Xi’an were collected in October 2009, and the concentration characteristics and sources of elements in PM2.5 were analyzed. [Result] The average mass concentration of PM2.5 in atmosphere in autumn in Xi’an City was 168.44 μg/m3 which was higher than that of Beijing and Pearl River Delta area, and the minimum and maximum value were 53.29 and 358.16 μg/m3, respectively. The mass concentration of S, Zn, K, Cl, Ca and Fe in PM2.5 was above 1.0 μg/m3, being at high pollution level. In addition, K had obvious correlation with organic carbon (OC) and element carbon (EC), with the correlation coefficients of 0.76 and 0.75 (P<0.000 1), respectively, and it showed that OC and EC had the same source as K, namely biomass burning had certain contribution to OC and EC. Enrichment factors analysis revealed that K, Ca, Fe, Ti, Mn and Cr mainly came from earth crust, rock weathering and other natural sources, while anthropogenic pollution sources had great effects on S, Zn, Cl, Pb, Br, Mo, Cd and As which were affected by soil dust and other natural sources slightly, and Cd had the highest enrichment factor and mainly came from metal smelting. In a word, coal combustion, biomass burning, vehicle emissions, metallurgical, chemical industry and dust were the main sources of PM2.5 in autumn in Xi’an. [Conclusion] The study could provide theoretical foundation for the control of urban environmental pollution.

Numerical simulation and experimental study of gas cyclone–liquid jet separator for fine particle separation

To address the shortcomings of existing particulate matter trapping technology,especially the low separation efficiency of fine particles,herein,a novel gas cyclone-liquid jet separator was developed to research fine particle trapping.First,numerical simulation methods were used to investigate the flow field characteristics and dust removal efficiency of the separator under different working conditions,and to determined suitable experimental conditions for subsequent dust removal experiments.Afterward,the separation efficiency of the separator against five kinds of common particles,including g-C_(3)N_(4),TiO_(2),SiC,talc,and SiO_(2),was experimentally studied.A maximum separation efficiency of 99.48%was achieved for particles larger than 13.1μm,and 96.55%efficiency was achieved for particles larger than 2μm.The best crushing atomization effect was achieved for the separator when uGwas 10 m·s^(-1)and uLwas 3 m·s^(-1),while the best separation effect was achieved when uGwas 10 m·s^(-1)and uLwas 3.75 m·s^(-1).Studies have shown that the gas cyclone-liquid jet separator has excellent applicability in the separation of fine particles.

Preparation of La _(0.9)RE_(0.1) MnO_3 Ultra fine Particles Used for CH_4 Oxidation

A technique for preparing perovskite type oxides was developed. By this technique, ultra fine particles of La 0.9 RE 0.1 MnO 3 (RE: Y, Ce, Pr, Sm, Gd,or Dy) with high surface area and single perovskite structure were prepared, and the series of La 0.9 RE 0.1 MnO 3 catalysts were studied experimentally. The so prepared ultra fine particles exhibites high catalytic activity for CH 4 total oxidation. The ultra fine particles of La 0.9 RE 0.1 MnO 3 (except for La 0.9 Pr 0.1 MnO 3) prepared by this method are thermally much more stable than LaMnO 3. Of the La 0.9 RE 0.1 MnO 3 series, La 0.9 Y 0.1 MnO 3 is most thermally stable, and La 0.9 Y 0.1 MnO 3 or La 0.9 Gd 0.1 MnO 3 (varies with calcination temperature) exhibits the highest catalytic activity for total oxidation of methane. The specific surface area of La 0.9 Y 0.1 MnO 3 calcined at 1000 ℃ reaches 14.9 m 2·g -1 , while the specific surface area of LaMnO 3 calcined at the same temperature is only 1.8 m 2·g -1 .

Electro-flotation and collision-attachment mechanism of fine cassiterite

In order to discuss the particle-bubble interaction during the electro-flotation of cassiterite,the recovery of cassiterite with different particle sizes was investigated,and the collision mechanism between the cassiterite particles and H2 bubbles was explored.The flotation tests were carried out in a single bubble flotation cell.The results show that cassiterite particles 10 μm,10-20 μm,20？38 μm and 38-74 μm match with bubbles with size of 50-150 μm,about 250 μm,74 μm and 74 μm,respectively,and a better recovery can be obtained.It is demonstrated that the recovery of cassiterite is influenced by the size of cassiterite particles and bubbles.Furthermore,the probabilities of collision,adhesion,detachment and collection were calculated using the collision,attachment and collection models.Theoretical calculation results show that the collision probability decreases sharply with decreasing particle size and increasing bubble size（below 150 μm）.The attachment probability would increase from the effective collision,leading to the increase of recovery.

Experimental study on the moving characteristics of fine grains in wide grading unconsolidated soil under heavy rainfall

The initiation mechanism of debris flow is regarded as the key step in understanding the debrisflow processes of occurrence, development and damage. Moreover, migration, accumulation and blocking effects of fine particles in soil will lead to soil failure and then develop into debris flow. Based on this hypothesis and considering the three factors of slope gradient, rainfall duration and rainfall intensity, 16 flume experiments were designed using the method of orthogonal design and completed in a laboratory. Particle composition changes in slope toe, volumetric water content, fine particle movement characteristics and soil failure mechanism were analyzed and understood as follows: the soil has complex, random and unstable structures, which causes remarkable pore characteristics of poor connectivity, non-uniformity and easy variation. The major factors that influence fine particle migration are rainfall intensity and slope. Rainfall intensity dominates particle movement, whereby high intensity rainfall induces a large number of mass movement and sharp fluctuation, causing more fine particles to accumulate at the steep slope toe. The slope toe plays an important role in water collection and fine particleaccumulation. Both fine particle migration and coarse particle movement appears similar fluctuation. Fine particle migration is interrupted in unconnected pores, causing pore blockage and fine particle accumulation, which then leads to the formation of a weak layer and further soil failure or collapses. Fine particle movement also causes debris flow formation in two ways: movement on the soil surface and migration inside the soil. The results verify the hypothesis that the function of fine particle migration in soil failure process is conducive for further understanding the formation mechanism of soil failure and debris flow initiation.

Characterization of fine organic particulate matter from Chinese cooking

PM 2.5 samples were collected by a three-stage cascade impactor at two kinds of Chinese restaurants to characterize fine organic particulate matter from Chinese cooking sources. Major individual organic compounds have been quantified by GC/MS, including series of alkanes, n-alkanoic acids, n-alkanals, alkan-2-ones and PAHs. Alkanes and ketones make up a significant fraction of particle-phase organic compounds, ranging from C 11 to C 26, and C 9 to C 19, respectively. In addition, other organic compound classes have been identified, such as alkanols, esters, furans, lactones, amides, and nitriles. The mass concentrations of fine particles, alkanes, n-alkanoic acids and PAHs in air emitted from the Uigur style cooking are hundreds times higher than ambient PM 2.5in Beijing.

Adsorption mechanism of mixed salicylhydroxamic acid and tributyl phosphate collectors in fine cassiterite electro-flotation system

Two reagents including salicylhydroxamic acid(SHA) and tributyl phosphate(TBP) were tested as collectors either separately or together for electro-flotation of fine cassiterite(<10 μm).Subsequently,the flotation mechanism of the fine cassiterite was investigated by adsorbance determination,electrophoretic mobility measurements and Fourier transform infra-red(FT-IR) spectrum checking.Results of the flotation experiments show that with SHA as a collector,the collecting performance is remarkably impacted by the pulp pH value as the floatability of cassiterite varies sharply when the pH changes,and flotation with SHA gives distinct maximum at about pH 6.5.Additionally,the floatability of cassiterite is determined by using SHA and TBP as collectors.The range of pulp pH for good floatability is broadened in the presence of TBP as auxiliary collector,and the utilization of TBP improves the recovery of cassiterite modestly.Moreover,the optimum pH value for cassiterite flotation is associated with adsorbance.The results of FT-IR spectrum and the electrophoretic mobility measurements indicate that the adsorption interaction between the collectors and the cassiterite is dominantly a kind of chemical bonding in the form of one or two cycle chelate rings due to the coordination of carbonyl group,hydroxamate and P=O group to the metal tin atoms,where the oxygen atoms contained in carbonyl group,hydroxamate and P=O group of the polar groups have the stereo conditions to form five-membered rings.In addition,the adsorption interactions of SHA and TBP on the surfaces of cassiterite are also dominated by means of hydrogen bonds.