Strength and Chloride Diffusion Behaviour of Three Generations of Repeated Recycled Fine Aggregate Concrete

The feasibility of using different generations of recycled fine aggregate（RFA） in structural concrete in a chloride environment was evaluated by studying the performance of the RFA and the corresponding concrete. The different generations of RFA were recycled by following the cycle of ‘concrete-waste concrete-fine aggregate-concrete＇. The properties of three generations of repeatedly recycled fine aggregate（RRFA） were systematically investigated, and we focused on the compressive strength and splitting tensile strength and chloride ion permeability of the related structural concretes with 25%, 75%, and 100% replacement of natural fine aggregates with RFA. The results indicated that the quality of RRFA presents a trend of slow deterioration, but the overall performance of all RRFA still fulfils the quality requirements of recycled fine aggregate for structural concrete. All RRFA concretes achieved the target compressive strength of 40 MPa after 28 days except for the second generation of the recycled aggregate concrete and the third generation of the recycled aggregate concrete with 100% replacement, and all the concrete mixes achieved the target compressive strength after 90 days. The insights obtained in this study demonstrate the feasibility of using at least three generations of RRFA for the production of normal structural concrete with a design service life of 100 years in a chloride environment.

Properties of Cementitious Rendering Mortar Prepared with Recycled Fine Aggregates

The results of an experimental study on investigating the properties of cementitious rendering mortars prepared with a recycled fine aggregate（RA） were presented.The RA was obtained from a recycling plant in which mixed demolition wastes were processed by mechanical crushing,sieving and sorting operations.Two series of rendering mortar mixes were prepared with a constant water/cement and a constant aggregate/cement ratios of 0.55 and 3 respectively.River sand and natural crushed rock fine were originally used in the two series separately,and they were consistently replaced by 25%,50%,75% and 100% by the recycled aggregate.The experimental results showed that mechanical properties,such as compressive strength,flexural strength and modulus of elasticity of the mortars prepared with the RA were lower than the mortars made with the natural aggregates.Nevertheless,the bond strength at the interface between the mortar and masonry bricks determined by the Triplet test was found to be higher for the mortars prepared with the RA.

Repair of Second-Generation Recycled Fine Aggregate of Waste Concrete from Freeze-Thaw Environment by Carbonation Treatment

The reuse of waste recycled concrete from harsh environments has become a research hotspot in the field of construction.This study investigated the repair effect of carbonation treatment on second-generation recycled fine aggregate(SRFA)obtained from recycled fine aggregate concrete(RFAC)subjected to freeze-thaw(FT)cycles.Before and after carbonation,the properties of SRFA were evaluated.Carbonated second-generation recycled fine aggregate(CSRFA)at five substitution rates(0%,25%,50%,75%,100%)to replace SRFA was used to prepare carbonated second-generation recycled fine aggregate concrete(CSRFAC).The water absorption,porosity and mechanical properties of CSRFAC were tested,and its frost-resisting durability was evaluated.The results showed after carbonation treatment,the physical properties of SRFA was improved and met the requirements of II aggregate.The micro-hardness of the interfacial transition zone and attached mortar in CSRFA was 50.5%and 31.2%higher than that in SRFA,respectively.With the increase of CSRFA replacement rate,the water absorption and porosity of CSRFAC gradually decreased,and the mechanical properties and frost resistance of CSRFAC were gradually improved.Carbonation treatment effectively repairs the damage of SRFA caused by FT cycles and improves its application potential.