Expert Experience and Data-Driven Based Hybrid Fault Diagnosis for High-SpeedWire Rod Finishing Mills

The reliable operation of high-speed wire rod finishing mills is crucial in the steel production enterprise.As complex system-level equipment,it is difficult for high-speed wire rod finishing mills to realize fault location and real-time monitoring.To solve the above problems,an expert experience and data-driven-based hybrid fault diagnosis method for high-speed wire rod finishing mills is proposed in this paper.First,based on its mechanical structure,time and frequency domain analysis are improved in fault feature extraction.The approach of combining virtual value,peak value with kurtosis value index,is adopted in time domain analysis.Speed adjustment and side frequency analysis are proposed in frequency domain analysis to obtain accurate component characteristic frequency and its corresponding sideband.Then,according to time and frequency domain characteristics,fault location based on expert experience is proposed to get an accurate fault result.Finally,the proposed method is implemented in the equipment intelligent diagnosis system.By taking an equipment fault on site,for example,the effectiveness of the proposed method is illustrated in the system.

Construction Cost Control Strategy of Finished House Based on BIM-5D

Building Information Modeling(BIM)technology can not only achieve project refinement management of the construction process based on a 3D model but also form a BIM-5D model based on the fusion of progress data and cost data to achieve the dynamic control of the whole process of project cost.This paper discusses the application of BIM-5D in the cost control of finished house construction,aiming to provide technical reference for China’s finished house project units,so that they can master how to realize the construction of cost control system based on BIM,the monitoring of the key coefficients of the cost,corrective action,to ensure that the project cost deviation is within the controllable range,and to make an effective guarantee for the economic benefits of the project construction.

Determination of reasonable finished state of self-anchored suspension bridges

A systematic and generic procedure for the determination of the reasonable finished state of self-anchored suspension bridges is proposed, the realization of which is mainly through adjustment of the hanger tensions. The initial hanger tensions are first obtained through an iterative analysis by combining the girder-tower-only finite element(FE) model with the analytical program for shape finding of the spatial cable system. These initial hanger tensions, together with the corresponding cable coordinates and internal forces, are then included into the FE model of the total bridge system, the nonlinear analysis of which involves the optimization technique. Calculations are repeated until the optimization algorithm converges to the most optimal hanger tensions(i.e. the desired reasonable finished bridge state). The "temperature rigid arm" is introduced to offset the unavoidable initial deformations of the girder and tower, which are due to the huge axial forces originated from the main cable. Moreover, by changing the stiffness coefficient K in the girder-tower-only FE model, the stiffness proportion of the main girder, the tower or the cable subsystem in the whole structural system could be adjusted according to the design intentions. The effectiveness of the proposed method is examined and demonstrated by one simple tutorial example and one self-anchored suspension bridge.

A Probe into China's Near Term Finished Petroleum Products Market

This article described the changes in consumption of finished petroleum products in China since 2008, referring to the international economic environment that has reversed the consumption of finished oil products, and China＇s domestic economic situation and oil pricing policy and major factors related with changes in industrial sectors. This article, by making projections on future market trends, has estimated that in the foreseeable future the domestic finished oil products market will be glutted with oil products that will exceed the demand.

Effect Of Construction On Some Mechanical Properties of Non-finished and Finished Cotton Fabrics

The analysis of fabrics of different woven constructions made of the same count of yarn indicates different wrinkle recovery and other mechanical properties before and after wrinkle resistant treatment. For the plain weave fabrics, parameters of the warp threads and weft threads can influence the effect of wrinkle resistance finishing. When the parameters of warp threads are similar as that of the weft threads, the even - structure can be obtained . Therefore, the best wrinkle recovery angle can be obtained. With the increasing of warp threads and weft threads, the strength of non - finished and finished fabrics can be increased. When the warp threads are similar as the weft threads, high strength retain can also be obtained.

High-Speed Wire Rod Finishing Mill

The high-speed wire rod finishing mill production line consisting of more than 10 key items of equipment such as a heating furnace,major rolling mill, secondary rolling mill,preliminary refining mill, finishing mill, carrier roller, wire-drive machine, coiler, and packing machine, is a technology-intensive product combining modern rolling technology with the high-technology of machinery, electronics,hydromatic drive and instrumentation, which only a few countries in the world can produce.

Mutagenicity and Genotoxicity of Organic Extracts from Finished Water with Different Treatment Process

Purification of surface water is widely practiced with conventional water treatment processes like coagulation-flocculation, sedimentation, filtration,and disinfection. Some reports have specified that conventional wastewater purification processes do not effectively remove many chemical contaminants,

Export Rebates on Grain Finished

According to the State Statistics Bureau, China's consumer price index (CPI) jumped by 6.9 percent year-on-year last November, approaching the high levels seen at the end of 1996, one of the largest areas of increase was the price of grain,which rose by 6.6 percent. There is no doubt the growth in CPI can be mainly attributed to soaring food prices and the diffusion effect of oil price adjustments. Large orders for grain exports have put Chinese grain suppliers under tremendous pressure. In order to solve this problem, the Finance Ministry and State Administration of Taxation together announced that 84 categories of export tax rebates on major types of grain will be eliminated.……

Cotton textile enterprise survey report in March:Textile demand reduced,finished product inventory increased

The domestic pandemic situation improved significantly in March,and textile companies started to resume production one after another.However,due to the rapid spread of foreign pandemic situation,foreign trade orders have been cancelled,domestic demand orders have not yet been fully restored,and sales of finished products have been slow.According to a survey conducted by China’s cotton early warning system on more than 90 designated textile companies across the country,raw material inventories of textile companies declined,textile production rose month-on-month,and yarn and cloth inventories increased slightly.

Optimization by Thermodynamics in Time Finished of a Cold Store with Mechanical Compression of the Vapors

This study made it possible to determine by the application of thermodynamics in finished time, the points of instruction necessary to the development of a regulation system for the rationalization of the power consumption in a cold store. These points were obtained by determining the optimal variations of temperature as well to the condenser and the evaporator corresponding to the minimum capacity absorptive by the compressor for a maximum COP.

Direct Rapid Prototyping of Metal Parts by Hybrid of Plasma Deposition and Milling Machine

General principle and layout of the prototype machine is introduced. Primary results of producing a metal vase to investigate the proper selection of numerous technical parameters are presented.

Three decades and beyond:Breeding,biotech breakthroughs and future of China's GM insect-resistant cotton

Cotton(Gossypium spp.)is a pivotal crop in the global textile industry,providing essential natural fibers.Additionally,cottonseed offers significant value as a source of oil and as feed for livestock(Huang et al.2021;Wen et al.2023).The sector,dependent on cotton,features a comprehensive value chain extending from the processing of fibers to the production of finished textiles,and it employs tens of millions of individuals(Dorward et al.1970).

Novel Batch Polishing Method of Ceramic Cutting Inserts for Reducing Tool Wear

Ceramic cutting inserts are a type of cutting tool commonly used in high-speed metal cutting applications.However,the wear of these inserts caused by friction between the workpiece and cutting inserts limits their overall effectiveness.In order to improve the tool life and reduce wear,this study introduces an emerging method called magnetic field-assisted batch polishing(MABP)for simultaneously polishing multiple ceramic cutting inserts.Several polishing experiments were conducted under different conditions,and the wear characteristics were clarified by cutting S136H steel.The results showed that after 15 min of polishing,the surface roughness at the flank face,edge,and nose of the inserts was reduced to below 2.5 nm,6.25 nm,and 45.8 nm,respectively.Furthermore,the nose radii of the inserts did not change significantly,and there were no significant changes in the weight percentage of elements before and after polishing.Additionally,the tool life of the batch polished inserts was found to be up to 1.75 times longer than that of unpolished inserts.These findings suggest that the MABP method is an effective way to mass polish ceramic cutting inserts,resulting in significantly reduced tool wear.Furthermore,this novel method offers new possibilities for polishing other tools.

Synthesis and Characterization of Nonionic Waterborne Polyurethane and Application to Wool Fabric Finishing

A nonionic waterborne polyurethane(WPU) was synthesized by the self-emulsification method using polyether diol(N220),isophorone diisocyanate(IPDI),trimethylolpropane poly(ethylene glycol monomethyl ether)(N120),1,4-butanediol(BDO) and trimethylolpropane(TMP) as the main materials.The effects of the NCO/OH ratio on the emulsion and film properties of NWPU were explored.The experimental results show that the NWPU prepared at an NCO/OH ratio of 1.1 has good emulsion stability and easy film formation,and the resultant film was elastic,soft,and transparent.The sample was used for wool finishing and the application performance was evaluated.When the NWPU dosage reached 40 g·L^(-1),the fabric area felt shrinkage rate reduced from 8.97% to 4.75%,the pilling rating raised from grade 2-3 to grade 4,and the whiteness value only decreased by 3.87%.

High-Speed and Low-Noise Gear Finishing by Gear Grinding and Honing:A Review

Gears are important mechanical parts for transmitting power and play an increasingly important role in the machinery industry.The electric vehicle industry developed rapidly and became a vital development field of the automotive industry over the past few years.The conversion of energy increases the requirements for electric vehicle transmissions,which promotes the development of high-speed and low-noise transmission gear.This paper elaborates on the research progress of high-speed and low-noise gear finishing methods.Firstly,this review analyses the machining requirements,finishing,and specific machining technologies of high-speed and low-noise gears.The importance of gear grinding and honing in high-speed and low-noise gear machining is highlighted.Secondly,the applications of gear grinding and honing in gear modification,error compensation,and texture control are analyzed.Furthermore,the role of precision machining technology in improving gear performance is clarified.Finally,the design and processing methods of the modified tooth flank for gear modification are summarized.In addition,the influence of tooth surface texture on noise is described,and the texture change methods are explored.The well-known open problems of gear finishing are finally identified,and some new research interests are also pointed out.This review will provide valuable references for further research on gear finishing.

Effects of altering the ratio of C16:0 and cis-9 C18:1 in rumen bypass fat on growth performance, lipid metabolism, intestinal barrier, cecal microbiota, and inflammation in fattening bulls

Background C16:0 and cis-9 C18:1 may have different effects on animal growth and health due to unique metabolism in vivo.This study was investigated to explore the different effects of altering the ratio of C16:0 and cis-9 C18:1 in fat supplements on growth performance,lipid metabolism,intestinal barrier,cecal microbiota,and inflammation in fattening bulls.Thirty finishing Angus bulls(626±69 kg,21±0.5 months)were divided into 3 treatments according to the randomized block design:(1)control diet without additional fat(CON),(2)CON+2.5%palmitic acid calcium salt(PA,90%C16:0),and(3)CON+2.5%mixed fatty acid calcium salt(MA,60%C16:0+30%cis-9 C18:1).The experiment lasted for 104 d,after which all the bulls were slaughtered and sampled for analysis.Results MA tended to reduce 0–52 d dry matter intake compared to PA(DMI,P=0.052).Compared with CON and MA,PA significantly increased 0–52 d average daily gain(ADG,P=0.027).PA tended to improve the 0–52 d feed conversion rate compared with CON(FCR,P=0.088).Both PA and MA had no significant effect on 52–104 days of DMI,ADG and FCR(P>0.05).PA tended to improve plasma triglycerides compared with MA(P=0.077),significantly increased plasma cholesterol(P=0.002)and tended to improve subcutaneous adipose weight(P=0.066)when compared with CON and MA.Both PA and MA increased visceral adipose weight compared with CON(P=0.021).Only PA increased the colonization of Rikenellaceae,Ruminococcus and Proteobacteria in the cecum,and MA increased Akkermansia abundance(P<0.05).Compared with CON,both PA and MA down-regulated the m RNA expression of Claudin-1 in the jejunum(P<0.001),increased plasma diamine oxidase(DAO,P<0.001)and lipopolysaccharide(LPS,P=0.045).Compared with CON and MA,PA down-regulated the ZO-1 in the jejunum(P<0.001)and increased plasma LPS-binding protein(LBP,P<0.001).Compared with CON,only PA down-regulated the Occludin in the jejunum(P=0.013).Compared with CON,PA and MA significantly up-regulated the expression of TLR-4 and NF-κB in the visceral adipose(P<0.001)and increased plasma IL-6(P<0.001).Compared with CON,only PA up-regulated the TNF-αin the visceral adipose(P=0.01).Compared with CON and MA,PA up-regulated IL-6 in the visceral adipose(P<0.001),increased plasma TNF-α(P<0.001),and reduced the Ig G content in plasma(P=0.035).Compared with CON,PA and MA increased C16:0 in subcutaneous fat and longissimus dorsi muscle(P<0.05),while more C16:0 was also deposited by extension and desaturation into C18:0 and cis-9 C18:1.However,neither PA nor MA affected the content of cis-9 C18:1 in longissimus dorsi muscle compared with CON(P>0.05).Conclusions MA containing 30%cis-9 C18:1 reduced the risk of high C16:0 dietary fat induced subcutaneous fat obesity,adipose tissue and systemic low-grade inflammation by accelerating fatty acid oxidative utilization,improving colonization of Akkermansia,reducing intestinal barrier damage,and down-regulating NF-κB activation.