A three-dimensional cyclic symmetry finite element model of titanium-matrix composites（TMCs） ring was developed to investigate the stress distribution and burst failure. The effects of fiber volume fractions, reinfo...A three-dimensional cyclic symmetry finite element model of titanium-matrix composites（TMCs） ring was developed to investigate the stress distribution and burst failure. The effects of fiber volume fractions, reinforced areas, thermal residual stresses and two different temperatures on stress distribution were studied. The burst speed was obtained through analyzing the hoop tensile stresses under a series of rotating speeds. The results indicate that at the two different temperatures, the influences of fiber volume fractions and reinforced areas on stress level and distribution are different. Some proposals are provided for the structure design of the TMCs ring. With regard to thermal residual stresses, a larger reinforced area is an advisable choice for design of the ring at higher temperature.展开更多
Permutation codes over finite chain rings are introduced; by using the character of the finite chain rings and the knowledge of representation of group, some conditions for existence or non-existence of self-dual perm...Permutation codes over finite chain rings are introduced; by using the character of the finite chain rings and the knowledge of representation of group, some conditions for existence or non-existence of self-dual permutation codes over finite chain rings are obtained. Specially, when the group is a direct product of a 2-group and a T-group, and the group action is transitive, the sufficient and necessary condition of the existence of permutation codes is given.展开更多
In this paper, we determine the normal forms of idempotent matrices for similarity over finite local rings Z/p^kZ, from which we construct a Cartesian authentication code and compute its size parameters and the probab...In this paper, we determine the normal forms of idempotent matrices for similarity over finite local rings Z/p^kZ, from which we construct a Cartesian authentication code and compute its size parameters and the probabilities of successful impersonation and substitution attack under the hypothesis that the cecoding rules are chosen according to a uniform probability distribution.展开更多
Let R be an infinite ring with a maximal finite subring. We prove that R has a largest finite ideal and a largest finite nilpotent ideal N By a B ring, we mean an infinite ring with 1 containing a maximal finite subr...Let R be an infinite ring with a maximal finite subring. We prove that R has a largest finite ideal and a largest finite nilpotent ideal N By a B ring, we mean an infinite ring with 1 containing a maximal finite subring which is a subfield containing 1. It is shown that R/NUVW, where U is a finite ring, V is a finite direct sum of matrix rings over B rings, and W is a ring containing no nonzero finite subrings.展开更多
In this paper, we obtain the period of generalized Fibonacci sequence in finite rings with identity of order p2 by using equality recursively defined by Fn＋2 = A1Fn＋1 ＋ A0Fn, for n ≥ 0, where F0 = 0 （ the zero of...In this paper, we obtain the period of generalized Fibonacci sequence in finite rings with identity of order p2 by using equality recursively defined by Fn＋2 = A1Fn＋1 ＋ A0Fn, for n ≥ 0, where F0 = 0 （ the zero of the ring）, F1 = 1 （the identity of the ring） and A0 , A1 are generators elements of finite rings with identity of order p2. Also, we get some results between the period of generalized Fibonacci sequence in the finite rings oforderp2 and characteristic of these rings.展开更多
In this work, we will to study the equation of an elliptic curve over the ring An = F2d [E], en = 0.,where d. is a positive integer. More precisely we defined the J-invariant of an elliptic curves over the ring An and...In this work, we will to study the equation of an elliptic curve over the ring An = F2d [E], en = 0.,where d. is a positive integer. More precisely we defined the J-invariant of an elliptic curves over the ring An and we establish re（J） = j, wherej is the j-invariant of an elliptic curve over the field F2d and re is the canonical projection defined over ring An by F2d , see [1].展开更多
A discontinuous Galerkin finite element method （DG-FEM） is developed for solving the axisymmetric Euler equations based on two-dimensional conservation laws. The method is used to simulate the unsteady-state underex...A discontinuous Galerkin finite element method （DG-FEM） is developed for solving the axisymmetric Euler equations based on two-dimensional conservation laws. The method is used to simulate the unsteady-state underexpanded axisymmetric jet. Several flow property distributions along the jet axis, including density, pres- sure and Mach number are obtained and the qualitative flowfield structures of interest are well captured using the proposed method, including shock waves, slipstreams, traveling vortex ring and multiple Mach disks. Two Mach disk locations agree well with computational and experimental measurement results. It indicates that the method is robust and efficient for solving the unsteady-state underexpanded axisymmetric jet.展开更多
The stress and the elastic deflection of internal ring gear in high-speed spur planetary gear units are investigated. A rim thickness parameter is defined as the flexibility of internal ring gear. Six evenly spaced li...The stress and the elastic deflection of internal ring gear in high-speed spur planetary gear units are investigated. A rim thickness parameter is defined as the flexibility of internal ring gear. Six evenly spaced linear springs are used to describe the fitting status between internal ring gear and the gearcase. The finite element model of the whole internal ring gear is established by means of Pro/E and ANSYS. The loads on meshing teeth of internal ring gear are applied according to the contact ratio and the load-sharing coefficient. With the finite element analysis (FEA), the influences of flexibility and fitting status on the stress and elastic deflection of internal ring gear are predicted. The simulation reveals that the principal stress and deflection increase with the decrease of rim thickness of internal ring gear. Moreover, larger spring stiffness helps to reduce the stress and deflection of internal ring gear. Therefore, the flexibility of internal ring gear must be considered during the design of high-speed planetary gear transmissions.展开更多
This paper elaborates on the magnetic forces between current carrying planar spiral coils. Direct and concentric rings methods are employed in order to calculate the magnetic force between these coils. The results obt...This paper elaborates on the magnetic forces between current carrying planar spiral coils. Direct and concentric rings methods are employed in order to calculate the magnetic force between these coils. The results obtained by two calculation methods show the efficiency of the replaced rings method in both simplicity and calculation time. Simula-tions using the Finite Element Method (FEM) are carried out to analyze the distribution of the magnetic flux density around the coils. Also, coils with precise size have been constructed and tested. The experimental results as well as the results obtained by FEM are used to validate the accuracy of the calculations.展开更多
The goal of this paper is to show that there are infinitely many number fields K/Q, for which there is no inert prime p ∈ N*, i.e. ∀p ∈ N* a prime number, prime ideal of K such that where: Zk</sub> i...The goal of this paper is to show that there are infinitely many number fields K/Q, for which there is no inert prime p ∈ N*, i.e. ∀p ∈ N* a prime number, prime ideal of K such that where: Zk</sub> is the Dedekind domain of the integer elements of K. To prove such a result, consider for any prime p, the decomposition into a product of prime ideals of Zk</sub>, of the ideal . From this point, we use on the one hand: 1) The well- known property that says: If , then the ideal pZ<sub>k</sub> decomposes into a product of prime ideals of Zk</sub> as following: . (where:;is the irreducible polynomial of θ, and, is its reduction modulo p, which leads to a product of irreducible polynomials in Fp[X]). It is clear that because if is reducible in Fp[X], then consequently p is not inert. Now, we prove the existence of such p, by proving explicit such p as follows. So we use on the other hand: 2) this property that we prove, and which is: If , is an irreducible normalized integer polynomial, whose splitting field is , then for any prime number p ∈ N: is always a reducible polynomial. 3) Consequently, and this closes our proof: let’s consider the set (whose cardinality is infinite) of monogenic biquadratic number fields: . Then each f<sub>θ</sub>(X) checks the above properties, this means that for family M, all its fields, do not admit any inert prime numbers p ∈ N. 2020-Mathematics Subject Classification (MSC2020) 11A41 - 11A51 - 11D25 - 11R04 - 11R09 - 11R11 - 11R16 - 11R32 - 11T06 - 12E05 - 12F05 -12F10 -13A05-13A15 - 13B02 - 13B05 - 13B10 - 13B25 -13F05展开更多
Frequency selective surfaces(FSSs)play an important role in wireless systems as these can be used as filters,in isolating the unwanted radiation,in microstrip patch antennas for improving the performance of these ante...Frequency selective surfaces(FSSs)play an important role in wireless systems as these can be used as filters,in isolating the unwanted radiation,in microstrip patch antennas for improving the performance of these antennas and in other 5G applications.The analysis and design of the double concentric ring frequency selective surface(DCRFSS)is presented in this research.In the sub-6 GHz 5G FR1 spectrum,a computational synthesis technique for creating DCRFSS based spatial filters is proposed.The analytical tools presented in this study can be used to gain a better understanding of filtering processes and for constructing the spatial filters.Variation of the loop sizes,angles of incidence,and polarization of the concentric rings are the factors which influence the transmission coefficient as per the thorough investigation performed in this paper.A novel synthesis approach based on mathematical equations that may be used to determine the physical parameters ofDCRFSSbased spatial filters is presented.The proposed synthesis technique is validated by comparing results from high frequency structure simulator(HFSS),Ansys electronic desktop circuit editor,and an experimental setup.Furthermore,the findings acquired from a unit cell are expanded to a 2×2 array,which shows identical performance and therefore proves its stability.展开更多
基金Projects(51071122,51271147,51201134)supported by the National Natural Science Foundation of ChinaProject(3102014JCQ01023)supported by the Fundamental Research Funds for the Central UniversitiesProject(115-QP-2014)supported by the Research Fund of the State Key Laboratory of Solidification Processing in Northwestern Polytechnical University,China
文摘A three-dimensional cyclic symmetry finite element model of titanium-matrix composites（TMCs） ring was developed to investigate the stress distribution and burst failure. The effects of fiber volume fractions, reinforced areas, thermal residual stresses and two different temperatures on stress distribution were studied. The burst speed was obtained through analyzing the hoop tensile stresses under a series of rotating speeds. The results indicate that at the two different temperatures, the influences of fiber volume fractions and reinforced areas on stress level and distribution are different. Some proposals are provided for the structure design of the TMCs ring. With regard to thermal residual stresses, a larger reinforced area is an advisable choice for design of the ring at higher temperature.
基金Supported by the National Natural Science Foundation of China (60373087, 60473023, 90104005, 60673071)
文摘Permutation codes over finite chain rings are introduced; by using the character of the finite chain rings and the knowledge of representation of group, some conditions for existence or non-existence of self-dual permutation codes over finite chain rings are obtained. Specially, when the group is a direct product of a 2-group and a T-group, and the group action is transitive, the sufficient and necessary condition of the existence of permutation codes is given.
基金Foundation item:The Key Project(03060)of Chinese Ministry of Education.
文摘In this paper, we determine the normal forms of idempotent matrices for similarity over finite local rings Z/p^kZ, from which we construct a Cartesian authentication code and compute its size parameters and the probabilities of successful impersonation and substitution attack under the hypothesis that the cecoding rules are chosen according to a uniform probability distribution.
文摘Let R be an infinite ring with a maximal finite subring. We prove that R has a largest finite ideal and a largest finite nilpotent ideal N By a B ring, we mean an infinite ring with 1 containing a maximal finite subring which is a subfield containing 1. It is shown that R/NUVW, where U is a finite ring, V is a finite direct sum of matrix rings over B rings, and W is a ring containing no nonzero finite subrings.
文摘In this paper, we obtain the period of generalized Fibonacci sequence in finite rings with identity of order p2 by using equality recursively defined by Fn＋2 = A1Fn＋1 ＋ A0Fn, for n ≥ 0, where F0 = 0 （ the zero of the ring）, F1 = 1 （the identity of the ring） and A0 , A1 are generators elements of finite rings with identity of order p2. Also, we get some results between the period of generalized Fibonacci sequence in the finite rings oforderp2 and characteristic of these rings.
文摘In this work, we will to study the equation of an elliptic curve over the ring An = F2d [E], en = 0.,where d. is a positive integer. More precisely we defined the J-invariant of an elliptic curves over the ring An and we establish re（J） = j, wherej is the j-invariant of an elliptic curve over the field F2d and re is the canonical projection defined over ring An by F2d , see [1].
文摘A discontinuous Galerkin finite element method （DG-FEM） is developed for solving the axisymmetric Euler equations based on two-dimensional conservation laws. The method is used to simulate the unsteady-state underexpanded axisymmetric jet. Several flow property distributions along the jet axis, including density, pres- sure and Mach number are obtained and the qualitative flowfield structures of interest are well captured using the proposed method, including shock waves, slipstreams, traveling vortex ring and multiple Mach disks. Two Mach disk locations agree well with computational and experimental measurement results. It indicates that the method is robust and efficient for solving the unsteady-state underexpanded axisymmetric jet.
基金Key Project of Ministry of Education of China (No.106050).
文摘The stress and the elastic deflection of internal ring gear in high-speed spur planetary gear units are investigated. A rim thickness parameter is defined as the flexibility of internal ring gear. Six evenly spaced linear springs are used to describe the fitting status between internal ring gear and the gearcase. The finite element model of the whole internal ring gear is established by means of Pro/E and ANSYS. The loads on meshing teeth of internal ring gear are applied according to the contact ratio and the load-sharing coefficient. With the finite element analysis (FEA), the influences of flexibility and fitting status on the stress and elastic deflection of internal ring gear are predicted. The simulation reveals that the principal stress and deflection increase with the decrease of rim thickness of internal ring gear. Moreover, larger spring stiffness helps to reduce the stress and deflection of internal ring gear. Therefore, the flexibility of internal ring gear must be considered during the design of high-speed planetary gear transmissions.
文摘This paper elaborates on the magnetic forces between current carrying planar spiral coils. Direct and concentric rings methods are employed in order to calculate the magnetic force between these coils. The results obtained by two calculation methods show the efficiency of the replaced rings method in both simplicity and calculation time. Simula-tions using the Finite Element Method (FEM) are carried out to analyze the distribution of the magnetic flux density around the coils. Also, coils with precise size have been constructed and tested. The experimental results as well as the results obtained by FEM are used to validate the accuracy of the calculations.
文摘The goal of this paper is to show that there are infinitely many number fields K/Q, for which there is no inert prime p ∈ N*, i.e. ∀p ∈ N* a prime number, prime ideal of K such that where: Zk</sub> is the Dedekind domain of the integer elements of K. To prove such a result, consider for any prime p, the decomposition into a product of prime ideals of Zk</sub>, of the ideal . From this point, we use on the one hand: 1) The well- known property that says: If , then the ideal pZ<sub>k</sub> decomposes into a product of prime ideals of Zk</sub> as following: . (where:;is the irreducible polynomial of θ, and, is its reduction modulo p, which leads to a product of irreducible polynomials in Fp[X]). It is clear that because if is reducible in Fp[X], then consequently p is not inert. Now, we prove the existence of such p, by proving explicit such p as follows. So we use on the other hand: 2) this property that we prove, and which is: If , is an irreducible normalized integer polynomial, whose splitting field is , then for any prime number p ∈ N: is always a reducible polynomial. 3) Consequently, and this closes our proof: let’s consider the set (whose cardinality is infinite) of monogenic biquadratic number fields: . Then each f<sub>θ</sub>(X) checks the above properties, this means that for family M, all its fields, do not admit any inert prime numbers p ∈ N. 2020-Mathematics Subject Classification (MSC2020) 11A41 - 11A51 - 11D25 - 11R04 - 11R09 - 11R11 - 11R16 - 11R32 - 11T06 - 12E05 - 12F05 -12F10 -13A05-13A15 - 13B02 - 13B05 - 13B10 - 13B25 -13F05
文摘Frequency selective surfaces(FSSs)play an important role in wireless systems as these can be used as filters,in isolating the unwanted radiation,in microstrip patch antennas for improving the performance of these antennas and in other 5G applications.The analysis and design of the double concentric ring frequency selective surface(DCRFSS)is presented in this research.In the sub-6 GHz 5G FR1 spectrum,a computational synthesis technique for creating DCRFSS based spatial filters is proposed.The analytical tools presented in this study can be used to gain a better understanding of filtering processes and for constructing the spatial filters.Variation of the loop sizes,angles of incidence,and polarization of the concentric rings are the factors which influence the transmission coefficient as per the thorough investigation performed in this paper.A novel synthesis approach based on mathematical equations that may be used to determine the physical parameters ofDCRFSSbased spatial filters is presented.The proposed synthesis technique is validated by comparing results from high frequency structure simulator(HFSS),Ansys electronic desktop circuit editor,and an experimental setup.Furthermore,the findings acquired from a unit cell are expanded to a 2×2 array,which shows identical performance and therefore proves its stability.
