Investigation of three-pulse photon echo in thick crystal using finite-difference time-domain method

This paper investigates the phenomenon of three-pulse photon echo in thick rare-earth ions doped crystal whose thickness is far larger than 0.002 cm which is adopted in previous works.The influence of thickness on the three-pulse photon echo＇s amplitude and efficiency is analyzed with the Maxwell-Bloch equations solved by finite-difference timedomain method.We demonstrate that the amplitude of three-pulse echo will increase with the increasing of thickness and the optimum thickness to generate three-pulse photon echo is 0.3 cm for Tm^（3＋）：YAG when the attenuation of the input pulse is taken into account.Meanwhile,we find the expression 0.09 exp（α＇L）,which is previously employed to describe the relationship between echo＇s efficiency and thickness,should be modified as 1.3 · 0.09 exp（2.4 ·α＇L） with the propagation of echo considered.

Optical simulation of in-plane-switching blue phase liquid crystal display using the finite-difference time-domain method

The finite-difference time-domain method is used to simulate the optical characteristics of an in-plane switching blue phase liquid crystal display.Compared with the matrix optic methods and the refractive method,the finite-difference timedomain method,which is used to directly solve Maxwell＇s equations,can consider the lateral variation of the refractive index and obtain an accurate convergence effect.The simulation results show that e-rays and o-rays bend in different directions when the in-plane switching blue phase liquid crystal display is driven by the operating voltage.The finitedifference time-domain method should be used when the distribution of the liquid crystal in the liquid crystal display has a large lateral change.

An efficient locally one-dimensional finite-difference time-domain method based on the conformal scheme

An efficient conformal locally one-dimensional finite-difference time-domain（LOD-CFDTD） method is presented for solving two-dimensional（2D） electromagnetic（EM） scattering problems. The formulation for the 2D transverse-electric（TE） case is presented and its stability property and numerical dispersion relationship are theoretically investigated. It is shown that the introduction of irregular grids will not damage the numerical stability. Instead of the staircasing approximation, the conformal scheme is only employed to model the curve boundaries, whereas the standard Yee grids are used for the remaining regions. As the irregular grids account for a very small percentage of the total space grids, the conformal scheme has little effect on the numerical dispersion. Moreover, the proposed method, which requires fewer arithmetic operations than the alternating-direction-implicit（ADI） CFDTD method, leads to a further reduction of the CPU time. With the total-field/scattered-field（TF/SF） boundary and the perfectly matched layer（PML）, the radar cross section（RCS） of two2 D structures is calculated. The numerical examples verify the accuracy and efficiency of the proposed method.

Adjustable transmission properties through ring-shaped nanotube arrays using finite-difference time-domain method

Metallic ring-shaped nanotube arrays are proposed and its optical transmission properties are studied by using finite-difference time-domain （FDTD） method. Compared with the transmission spectra of conventional circular nanotube arrays, two photonic band gaps are emerged in the transmission spectra offing-shaped nanotube arrays, the two band gaps and transmission spectra are adjusted by the length, inner radius, intertube spacing and the dielectric constants of the core and embedding medium, and magnitude modification, redshift and blueshift of the resonance modes are observed. A metallic ring-shaped nanotube arrays for subwavelength band-stop filter in the range of visible light can be achieved. To understand its physical origin, field-interference mechanism was suggested by the field distributions. The proposed nanostructures and results may have great potential applications in subwavelength near-field optics.

IMPROVED LOCALLY CONFORMAL FINITE-DIFFERENCE TIME-DOMAIN METHOD FOR EDGE INCLINED SLOTS IN A FINITE WALL THICKNESS WAVEGUIDE

An Improved Locally Conformal Finite-Difference Time-Domain (ILC-FDTD) method is presented in this paper, which is used to analyze the edge inclined slots penetrating adjacent broadwalls of a finite wall thickness waveguide. ILC-FDTD not only removes tile instability of the original locally conformal FDTD algorithm, but also improves the computational accuracy by locally modifying magnetic field update equations and the virtual iterative electric fields accordlng to the complexity of tile slot fringe fields. The mutual coupling between two edge inclined slots can also be analyzed by ILC-FDTD effectively.

Parallel computation of unified finite-difference time-domain for underwater sound scattering

In this work, we treat scattering objects, water, surface and bottom in a truly unified manner in a parallel finitedifference time-domain （FDTD） scheme, which is suitable for distributed parallel computing in a message passing interface （MPI） programming environment. The algorithm is implemented on a cluster-based high performance computer system. Parallel computation is performed with different division methods in 2D and 3D situations. Based on analysis of main factors affecting the speedup rate and parallel efficiency, data communication is reduced by selecting a suitable scheme of task division. A desirable scheme is recommended, giving a higher speedup rate and better efficiency. The results indicate that the unified parallel FDTD algorithm provides a solution to the numerical computation of acoustic scattering.

A Revised Piecewise Linear Recursive Convolution FDTD Method for Magnetized Plasmas

The piecewise linear recursive convolution （PLRC） finite-different time-domain （FDTD） method improves accuracy over the original recursive convolution （RC） FDTD approach and current density convolution （JEC） but retains their advantages in speed and efficiency. This paper describes a revised piecewise linear recursive convolution PLRC-FDTD formulation for magnetized plasma which incorporates both anisotropy and frequency dispersion at the same time, enabling the transient analysis of magnetized plasma media. The technique is illustrated by numerical simulations of the reflection and transmission coefficients through a magnetized plasma layer. The results show that the revised PLRC-FDTD method has improved the accuracy over the original RC FDTD method and JEC FDTD method.

Theoretical Proof of Unconditional Stability of the 3-D ADI-FDTD Method

In order to eliminate Courant-Friedrich-Levy(CFL) condition restraint and improvecomputational efficiency,a new finite-difference time-domain(FDTD)method based on the alternating-direction implicit(ADI) technique is introduced recently.In this paper,a theoretical proof of the stabilityof the three-dimensional(3-D)ADI-FDTD method is presented.It is shown that the 3-D ADI-FDTDmethod is unconditionally stable and free from the CFL condition restraint.

Analysis of Complex Electromagnetic Structures by Hybrid FDTD/WCIP Method

This paper proposes a hybrid full-wave analysis using Finite-Difference Time-Domain (FDTD) and Wave Concept Iterative Process (WCIP) methods, developed to analyze locally arbitrarily shaped microwave structures and Multilayer Planar structure. Using the equivalence principle, the original problem can be decomposed into two sub regions and solve each sub region separately. An interpolation scheme is proposed for communicating between the FDTD fields and WCIP wave, which will not require the effort of fitting the WCIP mesh to the FDTD cells in the interface region. This method is applied to calculate the scattering parameters of arbitrary (3-D) microwave structures. Applying FDTD to 3D discontinuity and WCIP to the remaining region preserves the advantages of both WCIP flexibility and FDTD efficiency. A comparison of the results with the FDTD staircasing data verifies the accuracy of the proposed method.

GENETIC ALGORITHM IN REDUCTION OF NUMERICAL DISPERSION OF 3-D ADI-FDTD METHOD

A new method to reduce the numerical dispersion of the three-dimensional Alternating Di-rection Implicit Finite-Difference Time-Domain (3-D ADI-FDTD) method is proposed. Firstly,the numerical formulations of the 3-D ADI-FDTD method are modified with the artificial anisotropy,and the new numerical dispersion relation is derived. Secondly,the relative permittivity tensor of the artificial anisotropy can be obtained by the Adaptive Genetic Algorithm (AGA). In order to demon-strate the accuracy and efficiency of this new method,a monopole antenna is simulated as an exam-ple. And the numerical results and the computational requirements of the proposed method are com-pared with those of the conventional ADI-FDTD method and the measured data. In addition the re-duction of the numerical dispersion is investigated as the objective function of the AGA. It is found that this new method is accurate and efficient by choosing proper objective function.

Numerical analysis of multicomponent responses of surface-hole transient electromagnetic method

We calculate the multicomponent responses of surface-hole transient electromagnetic method. The methods and models are unsuitable as geoelectric models of conductive surrounding rocks because they are based on regular local targets. We also propose a calculation and analysis scheme based on numerical simulations of the subsurface transient electromagnetic fields. In the modeling of the electromagnetic fields, the forward modeling simulations are performed by using the finite-difference time-domain method and the discrete image method, which combines the Gaver–Stehfest inverse Laplace transform with the Prony method to solve the initial electromagnetic fields. The precision in the iterative computations is ensured by using the transmission boundary conditions. For the response analysis, we customize geoelectric models consisting of near-borehole targets and conductive wall rocks and implement forward modeling simulations. The observed electric fields are converted into induced electromotive force responses using multicomponent observation devices. By comparing the transient electric fields and multicomponent responses under different conditions, we suggest that the multicomponent-induced electromotive force responses are related to the horizontal and vertical gradient variations of the transient electric field at different times. The characteristics of the response are determined by the varying the subsurface transient electromagnetic fields, i.e., diffusion, attenuation and distortion, under different conditions as well as the electromagnetic fields at the observation positions. The calculation and analysis scheme of the response consider the surrounding rocks and the anomalous field of the local targets. It therefore can account for the geological data better than conventional transient field response analysis of local targets.

Numerical modeling of the 2D time-domain transient electromagnetic secondary field of the line source of the current excitation

To effectively minimize the electromagnetic field response in the total field solution, we propose a numerical modeling method for the two-dimensional （2D） time- domain transient electromagnetic secondary field of the line source based on the DuFort- Frankel finite-difference method. In the proposed method, we included the treatment of the earth-air boundary conductivity, calculated the normalized partial derivative of the induced electromotive force （Emf）, and determined the forward time step. By extending upward the earth-air interface to the air grid nodes and the zero-value boundary conditions, not only we have a method that is more efficient but also simpler than the total field solution. We computed and analyzed the homogeneous half-space model and the fiat layered model with high precision--the maximum relative error is less than 0.01% between our method and the analytical method--and the solution speed is roughly three times faster than the total-field solution. Lastly, we used the model of a thin body embedded in a homogeneous half-space at different delay times to depict the downward and upward spreading characteristics of the induced eddy current, and the physical interaction processes between the electromagnetic field and the underground low-resistivity body.

Unconditionally stable Crank-Nicolson algorithm with enhanced absorption for rotationally symmetric multi-scale problems in anisotropic magnetized plasma

Large calculation error can be formed by directly employing the conventional Yee’s grid to curve surfaces.In order to alleviate such condition,unconditionally stable CrankNicolson Douglas-Gunn(CNDG)algorithm with is proposed for rotationally symmetric multi-scale problems in anisotropic magnetized plasma.Within the CNDG algorithm,an alternative scheme for the simulation of anisotropic plasma is proposed in body-of-revolution domains.Convolutional perfectly matched layer(CPML)formulation is proposed to efficiently solve the open region problems.Numerical example is carried out for the illustration of effectiveness including the efficiency,resources,and absorption.Through the results,it can be concluded that the proposed scheme shows considerable performance during the simulation.

THE STUDY ON MEASURING TECHNIQUE OF PARTIAL DISCHARGE IN GAS INSULATED SWITCHGEAR USING ULTRA HIGH FREQUENCY METHOD WITH EXTERNAL SENSORS

Objective In order to find early latent faults and prevent catastrophic failures, diagnosis of insulation condition by measuring technique of partial discharge(PD) in gas insulated switchgear (GIS) is applied in this paper, which is one of the most basic ways for diagnosis of insulation condition. Methods Ultra high frequency(UHF) PD detection method by using internal sensors has been proved efficient, because it may avoid the disturbance of corona, but the sensor installation of this method will be limited by the structure and operation condition of GIS. There are some of electromagnetic (E-M) waves leak from the place of insulation spacer, therefore, the external sensors UHF measuring PD technique is applied, which isn't limited by the operation condition of GIS. Results This paper analyzes propagated electromagnetic (E-M) waves of partial discharge pulse excited by using the finite-difference time-domain (FDTD) method. The signal collected at the outer point is more complex than that of the inner point, and the signals' amplitude of outer is about half of the inner, because it propagates through spacer and insulation slot. Set up UHF PD measuring system. The typical PD in 252kV GIS bus bar was measured using PD detection UHF technique with external sensors. Finally, compare the results of UHF measuring technique using external sensors with the results of FDTD method simulation and the traditional IEC60270 method detection. Conclusion The results of experiment shows that the UHF technique can realize the diagnosis of insulation condition, the results of FDTD method simulation and the result UHF method detection can demonstrate each other, which gives references to further researches and application for UHF PD measuring technique.

FDTD Simulation on Terahertz Waves Propagation Through a Dusty Plasma

The frequency dependent permittivity for dusty plasmas is provided by introducing the charging response factor and charge relaxation rate of airborne particles. The field equations that describe the characteristics of Terahertz（THz） waves propagation in a dusty plasma sheath are derived and discretized on the basis of the auxiliary differential equation（ADE） in the finite difference time domain（FDTD） method. Compared with numerical solutions in reference, the accuracy for the ADE FDTD method is validated. The reflection property of the metal Aluminum interlayer of the sheath at THz frequencies is discussed. The effects of the thickness, effective collision frequency, airborne particle density, and charge relaxation rate of airborne particles on the electromagnetic properties of Terahertz waves through a dusty plasma slab are investigated.Finally, some potential applications for Terahertz waves in information and communication are analyzed.

SO-FDTD Analysis of the Plasma Reflectance of Epstein Distribution

The analysis of electromagnetic propagation in a dispersive medium is complicated in the time-domain because its dielectric constant is frequency-dependent. In this paper, the dielectric constant of the dispersive medium is written as a rational polynomial function, and the relationship between D and E is derived in the time-domain. It is referred to as the shift operator finite-different time-domain （SO-FDTD） method. Compared to an analytical solution and a piecewise linear current density recursive convolution （PLJERC） solution, the high accuracy and efl%iency of this method is verified by calculating the reflectance of the electromagnetic wave through a cold plasma slab. As the electron density in plasma is distributed as the Epstein formula, the effect of distribution grads and electron collision frequency on the reflectance is calculated by using the SO-FDTD method. The result shows that the increase in the distribution grads coefficient affects the reflectance sharply. When it comes to a smaller distribution grads coelBcient, the increase of the collision frequency showed a significant effect on the reflectance, but on the contrary, there is actually less and less effect till it disappears.

Investigation of a Novel Compact Microstrip Antenna for Radiotelemetry Capsules Based on FDTD

The objective of this paper is to design a microstrip patch antenna for the miniature electro-capsule communicating with external recorder at 915MHz located in Industry, Science, and Medical (ISM) bands. Microstrip antenna design parameters, resonance characteristics and radiation patterns are evaluated using the finite-difference time-domain (FDTD) method. The effects of location of feed point and human body are analyzed, and the radiation performances of the proposed antenna are estimated in terms of radiation patterns. Finally, specific absorption rate (SAR) computations are also performed, and the peak 1-g and 10-g SAR values are calculated. According to peak SAR values, the maximum delivered power for the designed antenna was found so that the SAR values of the antennas satisfy ANSI limitations.

FDTD Simulations on Plasmonic Properties of End-to-End and Side-by-Side Assembled Au Nanorods

The surface plasmon resonance( SPR) of gold( Au) nanorod can be tuned in a large visible-near infrared( Vis-NIR) region by changing the aspect ratio of nanorod. Compared with the SPR of isolated Au nanorod,assembly of Au nanorods exhibits strong coupling effect in the nanogap and wealthy changes in the optical spectra. The SPR coupling effects and localized electronic fields for end-to-end( E-E) and side-by-side( S-S) assembled Au nanorods dimers are studied through finite-difference time-domain( FDTD) simulation. With decreasing the gap spacing,the longitudinal SPR( SPRL) red-shifts for the E-E orients Au nanorods dimer and blue-shifts for S-S orientes Au nanorods dimer. The transverse SPR( SPRT) has slight red-shifting for S-S assembly and no shifting for the E-E assembly. Moreover,a new coupling SPR appears for the E-E assembly in a long wavelength in the NIR region,blue-shifting and enhancing with decreasing the gap spacing. Based on the spring oscillator model and the polarization of nanoparticles with incident electric field,the SPR shifting and the appearance of new coupling SPR of assembled Au nanorods are proposed.

A four spiral slots microstrip patch antenna for radiotelemetry capsules based on FDTD

Antenna is very crucial to radiotelemetry capsules which can measure the physiological parameters of the gastroin- testinal (GI) tract. The objective of this paper is to design a novel spiral slots microstrip patch antenna for the radiotelemetry capsules communicating with external recorder at 915 MHz located in ISM (Industry, Science, and Medical) bands. The microstrip patch antenna is designed and evaluated using the finite-difference time-domain (FDTD) method. Return loss characteristics and the effect of the human body on resonant frequency are analyzed, and the performances of radiation patterns at different positions of the human alimentary tract are also estimated. Finally, specific absorption rate (SAR) computations are performed, and the peak 1-g and 10-g SAR values are calculated. According to the peak SAR values, the maximum delivered power for the designed antenna was found so that the SAR values of the antenna satisfy the ANSI (American National Standards Institute) limitations.

Characteristic-Based Time Domain Method for Cylindrically Conformal Microstrip Patch Antennas

The characteristics of a cylindrical conformal microstrip patch antenna are analyzed by using the characteristic-based time domain （CBTD） method. A governing equation in the cylindrical coordinate system is formulated directly to facilitate the analysis of cylindrically conformal microstrip patch antennas. The algorithm has second-order accuracy both in time and space domain and has the potential to eliminate the spurious wave reflection from the numerical boundaries of the computational domain, Numerical results demonstrate the important merits and accuracy of the proposed technique in computational electromagnetics,