Moisture-proof and Enhanced Effect of Inorganic Coating on Porous Si_3N_4 Ceramic

Inorganic coating was fabricated on the surface of the porous Si3N4 ceramic by polymer derived（PD） and spraying technology, via using vinyl-polysilazane（PSN-1） as a preceramic polymer and Si3N4 and lithium aluminosilicate（LAS） powders as fillers. The phase and microstructure of the coatings were analyzed by X-ray diffraction（XRD） analysis and scanning electron microscopy（SEM）, respectively. The effect of the coatings on mechanical property and humidity resistance of the porous Si3N4 ceramic was investigated. The experimental results showed that we successfully fabricated the uniform and dense coating which preferably combined with the substrate upon the addition of fillers. The bending strength of the porous Si3N4 ceramic sprayed the coating increased by more than 18%, and the surface hardness increased by 1.7 times. The apparent porosity of the materials reduced by an average of 97.7%, and water absorption was below 0.5%. Therefore, the prepared coating with preferable density had an obviously moisture-proof and enhanced effect on the porous Si3N4 ceramic.

A Comparative Analysis of the New -3(-n) - 1 Remer Conjecture and a Proof of the 3n + 1 Collatz Conjecture

This scientific paper is a comparative analysis of two mathematical conjectures. The newly proposed -3(-n) - 1 Remer conjecture and how it is related to and a proof of the more well known 3n + 1 Collatz conjecture. An overview of both conjectures and their respective iterative processes will be presented. Showcasing their unique properties and behavior to each other. Through a detailed comparison, we highlight the similarities and differences between these two conjectures and discuss their significance in the field of mathematics. And how they prove each other to be true.

Comparison of electrochemical properties of atmospheric pressure plasma coatings for Al_2O_3-3TiO_2 and CoNiCrAlY in sea water

To improve the durability of underwater rotating products,the corrosion characteristics in harsh marine environment were evaluated through various electrochemical experiments on the Al2O3-3TiO2 and CoNiCrAlY coating layers by atmospheric pressure plasma spray coating process.By evaluating the corrosion resistance of these materials,their applicability to environmentally friendly power generation equipment such as blades of tidal current turbines was examined.According to the Tafel analysis for micro-areas including the coating layer,the coating/metal interlayer and the base metal,the Al2O3-3TiO2 coating layer and the CoNiCrAlY coating layer show markedly lower corrosion current density than the base metal.The corrosion current density of the CoNiCrAlY coating layer (9.75316×10-8A/cm2) is about 1.6 times more than that of the Al2O3-3TiO2 coating layer (6.13139×10-8A/cm2).

X-ray diffraction study of effect of deposition conditions on α-β phase transition and stress evolution in sputter-deposited W coatings

Pure W and W-Cu-W trilayer coatings were deposited on an Fe substrate by d.c. magnetron sputtering. The α-β phase evolution, intragranular stress evolution in sputter-deposited W layer were investigated by x-ray diffraction. They are directly related to the film microstructure, density and adhesion. Therefore, control of the film stress and phase component transition is essential for its applications. The phase component transition from β-W to α-W and intragranular stress evolution from tensile to compressive strongly depend on the deposition parameters and can be induced by lowering Ar pressure and rising target power. The compressively stressed films with α-W phase have a dense microstructure and high adhesion to Fe substrate.

Influence of Microstructures on Thermal Shock and Sintering Behavior of YSZ-based Thermal Barrier Coatings

In this study, two thermal barrier coatings based on YSZ were produced by using a commercially available agglomerated and sintered powder and a special spray powder prepared by high energy ball milling. Both thermal barrier coatings exhibited similar overall porosities, but significantly different microstructures. Application of the special spray powder prepared by high energy ball milling led to a microstructure with numerous inclusions of semi-molten agglomerates, which introduced a plethora of clusters of fine pores into the coating and several more microstructural defects. This microstructure resulted in a significantly better thermal shock behavior compared to the conventional thermal barrier coating. The heat treatment of both thermal barrier coatings atθ=1150℃for t=100 h led to a sintering of both coatings. The results were reduced overall porosity and significantly increased fracture toughness. A correlation between the fracture toughness of both coatings after the heat treatment and the thermal shock life time could not be identified.

A breakthrough in fabric cleaning: coating-at-will concept for stainproof fabrics

Surfactants are extensively used in daily life and industrial production, posing significant challenges to global sustainability. Household detergents, including dishwashing detergents and laundry, alone account for over 40% of the global surfactant market [1].

Transient liquid assisted nucleation mechanism of YBa_2Cu_3O_(7-δ) in coated conductor films derived by BaF_2 process

It is significant for low-cost preparation of YBa2Cu3O7-δ（YBCO） coated conductors to make clear the mechanism of orientation, copper segregation, and nucleation density in BaF2-derived YBCO crystallization. In the present work,a distinct nucleation mechanism was proposed based on a transient liquid phase induced by the size effect as well as near-equilibrium assumption. With this scheme the nucleation of YBCO prepared by metal–organic deposition（MOD） or the physical vapor deposition BaF2 process was semi-quantitatively analyzed, revealing that the direct driving force for nucleation is YBCO supersaturation in the liquid phase. The theoretical analysis on the nucleation orientation portion is evidenced by the experimental result.

Structure of Micro-nano WC-10Co4Cr Coating and Cavitation Erosion Resistance in NaCl Solution

Cavitation erosion （CE） is the predominant cause for the failure of overflow components in fluid machinery. Advanced coatings have provided an effective solution to cavitation erosion due to the rapid development of surface engineering techniques. However, the influence of coating structures on CE resistance has not been sys- tematically studied. To better understand their relationship, micro-nano and conventional WC-10Co4Cr cermet coat- ings are deposited by high velocity oxygen fuel spray- ing（HVOF）, and their microstructures are analyzed by OM, SEM and XRD. Meanwhile, characterizations of mechan- ical and electrochemical properties of the coatings are carried out, as well as the coatings＇ resistance to CE in 3.5 wt % NaC1 solution, and the cavitation mechanisms are explored. Results show that micro-nano WC-10Co4Cr coating possesses dense microstructure, excellent mechanical and electrochemical properties, with very low porosity of 0.26 4-0.07% and extraordinary fracture toughness of 5.58 4-0.51 MPa.m1/2. Moreover, the CE resistance of micro-nano coating is enhanced above 50% than conventional coating at the steady CE period in 3.5 wt % NaC1 solution. The superior CE resistance of micro- nano WC-10Co4Cr coating may originate from the unique micro-nano structure and properties, which can effectively obstruct the formation and propagation of CE crack. Thus,a new method is proposed to enhance the CE resistance of WC-10Co4Cr coating by manipulating the microstructure.

Protection Performance of Plasma Sprayed Al_(2)O_(3)-13 wt%TiO_(2) Coating Sealed with an Organic-inorganic Hybrid Agent

An organic-inorganic hybrid sealing agent was fabricated and used in the plasma sprayed Al_(2)O_(3)-13 wt%TiO_(2)coating,and conventional silicone agent was also used for comparison.Protection performance of the coatings was comprehensively evaluated based on both anti-corrosion and anti-biofouling properties.The results reveal that the sealing treatment is remarkably useful to decrease the porosity of the coating,and the porosity of the coating sealed with the hybrid agent is only 0.035%.Immersion corrosion test and Tafel polarization test reveal that the sealed coating with the hybrid agent exhibits a better corrosion resistance by compared with the coating sealed with silicone agent.The corrosion current density i_(corr) of the hybrid agent sealed coating is only 0.7×10^(-6)A·cm^(-2).Moreover,anti-biofouling tests both in the outdoor analogue hydraulic environment and in the natural marine environment prove that the mentioned novel coating presents a better combination of corrosion resistance and anti-biofouling property by compared with the other coatings,and it could be used as a protection of metal components in the marine environment.

Self - Crosslinking Behavior of Self - Emulsion Water - Based Polyure-thane Coating Agents

The relation between structures and properties of polyurethane are investigated by modern physical and chemical methods.The results obtained are as follows:the effects of the content of self-crosslinking agent on the properties of polyurethane,i.e.,dispersion stability,dynamical viscoelasticity and mechanical properties are discussed.It is found that the optimum molar ratio of epichlorohydrin and diethylenetriamine is 1:2.A mois-

Coating Resistant Refractory Castables YB/T 4193-20091

1 Scope This standard specifies the term, definition, classification, technical requirements, test methods, quality appraisal procedures, packing, marking, transportation, storage, and quality certificate of coating resistant refractory eastables.

The Influence of Ceramic Coating on Fatigue Crack Growth Behaviour of X17CrNi15-2 Stainless Steel

Fatigue crack growth tests were carried out on the SEN B3 precracked specimens, with dimensions in accordance with ISO 12108 requirements. The specimens were made of martensitic stainless steel, X17CrNi15-2, and some of them were modified by the ceramic coating deposition surface treatment. The effects of ceramic coating, on the fatigue crack growth behaviour of hollow shaft specimens, were experimentally investigated. Fatigue crack growth rates, da/dN, were characterised, using the power law relationship between da/dN (in mm/cycle) and the stress intensity factor range, ΔK (in MPa∙m0.5). The two constants of the correlation are 7.9768 × 10−9 and 2.8107 for the parent material, and those for the coated material are 2.4391 × 10−9 and 3.1990, respectively. Microstructural analyses were carried out on the tested specimens, which shows that the maximum hardness of the ceramic coating is higher than that of substrate by a factor of ~3.2. The dimple fracture dominates the final fracture mechanism for the parent material, and the combination of fatigue, ductile fracture and cleavage dominates the final fracture mechanism for the coated material, based on the SEM analyses. EDS tests’ results reveal that the parent material specimen shows higher levels of C at matrix regions along with Fe- and O-rich regions, compared with the coated material specimen.

Microstructural Characteristics and Wear Performance of Plasma Sprayed Al_2O_3-13 wt. % TiO_2 Coating on the Surface of Extrusion Wheel

The conventional Al2O3-13 wt. % TiO2 composite ceramic coatings are fabricated by plasma spraying on the surface of extrusion wheel. The microstrueture, morphology and phase compositions of the substrate and coat- ing are investigated by using X-ray diffractometry （XRD） , scanning electron microsopy （SEM） and energy dis- persive spectroscopy （EDS）. Moreover, the microhardness of the substrate and the coating are investigated using Vickers mierohardness tester, the friction and wear behaviors of the substrate and the coating are investigated by using a block-on-ring tribometer under dry sliding conditions with the load of 245 N. The results show that both γ-Al2O3 and α-Al2O3 phases are observed in the as-sprayed coatings, the mian phase is γ-Al2O3. There are white particulates Al2O3 on its surface. The Al2O3-13 wt. % TiO2 coating possesses higher mierohardness which is about 1018HV and 1.6 times that of the substrate. The wear performance of coating is better than that of the substrate. In a practical application, the life of the extrusion wheel which is plasma sprayed Al2O3-13 wt. % TiO2 coating on the surface is 1.2 times that of the conventional extrusion wheel, and the life is about 330 h.

Finite Element Simulation of the Polymeric Liquid Flow in Coat-hanger Die

A three - dimenslonal finite element model is developed to deal with the polymeric liquid flow in coat - hanger die. This model is used to predict the flow behavior of the 2％ CMC/watsr solution in the coat - hanger die with linearly taper manifolds and its validity is experimentally verified quantitatively and qualitatively by using Laser Doppler Velocimetry and Particle Image Velocimetry respectively.

涤纶织物的磷-氮水性聚氨酯阻燃整理

以甲苯二异氰酸酯与N,N-双(2-羟甲基)氨基乙基膦酸二甲酯反应,合成了反应型磷-氮改性阻燃水性聚氨酯织物涂层剂,并应用于涤纶织物的阻燃整理。考察了其对整理织物手感、阻燃性能、耐水洗性能及色变的影响,并用扫描电镜对织物燃烧后的炭层进行分析。试验结果表明,当涂层剂中的磷-氮阻燃剂含量为15%时,阻燃整理织物的手感柔软而干爽,耐水洗性能良好,垂直燃烧性能达到GB/T 5455—1997 B1级标准,总色差值均小于4.0,对布样色变影响小。

涤纶织物的磷-氮系膨胀型阻燃剂涂层整理

以自制P-N系膨胀型阻燃剂为原料,与结晶Ⅱ型聚磷酸铵、水性聚丙烯酸酯复合制成环保的阻燃涂层胶,并用于涤纶织物的阻燃涂层整理。探讨了上胶量对阻燃效果的影响,通过垂直燃烧法、热重分析(TG)和扫描电镜(SEM)等,对阻燃机理进行分析。结果表明,该阻燃涂层胶对涤纶织物具有优良的阻燃效果,集炭源、酸源、气源于一体的自制阻燃剂具有较好的阻燃作用,且无传统聚磷酸铵复配体系吸湿或"白霜"等问题,是一种经济环保的阻燃助剂。

淀粉-苯乙烯接枝共聚物作防水涂料的研究(Ⅲ)

本文介绍了通过接技共聚反应，将淀粉与苯乙烯接枝改性，与废ＰＳ混溶，制得一种性能优良的纸品防水涂料。

湿热盐雾大气环境印制电路板防护棚下试验研究

目的 试验研究不同防护工艺的印制电路板在湿热盐雾大气环境下的适应性。方法 结合无防护试件,在严苛的濒海棚下环境开展4种印制电路板防护工艺的暴露试验,通过观察电路板外观,测量计算绝缘电阻、介质耐压、品质因数,以及扫描电镜、能谱分析等技术手段评价印制电路板防护工艺的性能。结果 濒海棚下环境中,无防护印制电路板腐蚀严重,电气性能显著下降。改性硅、有机硅三防漆防护的印制电路板在整个试验周期内腐蚀程度轻微,电气性能较好,表面涂层仅存在轻微起泡现象。丙烯酸三防漆防护印制电路板防护性能不稳定,印制电路板出现腐蚀现象,品质因数总体低于改性硅、有机硅三防漆防护。聚氨酯三防漆防护印制电路板在电气测试性能中表现良好,但涂层出现太多破损、起泡等缺陷,铜导线出现异常生锈现象。在介质耐压测试中,多周期呈现击穿状态。结论 在濒海区域棚下湿热盐雾环境中,涂覆有机硅、改性硅三防漆的印制电路板防护状态最好,可优先选择作为防护手段。

电沉积Ni-ZrO_2复合镀层的耐蚀性能研究

在氨基磺酸盐溶液中获得了纳米Ni镀层和复合结构Ni-ZrO2镀层,两种镀层试样在4%NaCl溶液中进行耐蚀性能测试。利用X射线衍射、扫描电镜技术对镀层进行结构、形貌分析发现,Ni-ZrO2复合镀层表面颗粒更为细小,显微组织更加均匀、致密。腐蚀性能试验表明复合电镀层的耐蚀性优于纳米镍镀层的原因是因为纳米ZrO2颗粒的存在,不仅细化了基质金属的晶粒,同时提高了复合电镀层表面的化学稳定性,提高了腐蚀电位。

裂解气相色谱-质谱法分离鉴定聚氨酯防水涂料中的煤焦油

建立了采用闪蒸裂解气相色谱-质谱测定固化后的聚氨酯防水涂料中的煤焦油的新方法。该方法方便快捷,无需对样品进行前处理,而且测定结果不受聚氨酯组分的干扰。该方法在建筑材料中有毒有害组分的分析检测方面有一定的应用价值。