Conformal invariance and Hojman conserved quantities of first order Lagrange systems

In this paper the conformal invariance by infinitesimal transformations of first order Lagrange systems is discussed in detail. The necessary and sufficient conditions of conformal invariance and Lie symmetry simultaneously by the action of infinitesimal transformations are given. Then it gets the Hojman conserved quantities of conformal invariance by the infinitesimal transformations. Finally an example is given to illustrate the application of the results.

Research on Precise Trigonometric Leveling in Place of First Order Leveling

Through the analysis of the principle, error sources and precision of trigonometric leveling, this paper points out the key problems about first order leveling replaced by trigonometric leveling; and for the first time puts forward that, in some given conditions, it is not only feasible but also valuable to replace first order leveling by precise trigonometric leveling, and proves it by experimentation as well. The content and conclusion of this paper have consulting significance and practicable value for our setting down relational criterion and production practice.

Application of first order rate kinetics to explain changes in bloom toxicity——the importance of understanding cell toxin quotas

Cyanobacteria are oxygenic photosynthetic Gram-negative bacteria that can form potentially toxic blooms in eutrophic and slow flowing aquatic ecosystems. Bloom toxicity varies spatially and temporally, but understanding the mechanisms that drive these changes remains largely a mystery. Changes in bloom toxicity may result from changes in intracellular toxin pool sizes of cyanotoxins with differing molecular toxicities, and/or from changes in the cell concentrations of toxic and non-toxic cyanobacterial species or strains within bloom populations. We show here how first-order rate kinetics at the cellular level can be used to explain how environmental conditions drive changes in bloom toxicity at the ecological level. First order rate constants can be calculated for changes in cell concentration( μ_c : specific cell division rate) or the volumetric biomass concentration( μ_g : specific growth rate) between short time intervals throughout the cell cycle. Similar first order rate constants can be calculated for changes in nett volumetric cyanotoxin concentration( μ_(tox) : specific cyanotoxin production rate) over similar time intervals. How μ_c(or μ_g) covaries with μ tox over the cell cycle shows conclusively when cyanotoxins are being produced and metabolised, and how the toxicity of cells change in response to environment stressors. When μ_(tox)/μ_c >1, cyanotoxin cell quotas increase and individual cells become more toxic because the nett cyanotoxin production rate is higher than the cell division rate. When μ_(tox)/μ_c =1, cell cyanotoxin quotas remains fixed because the nett cyanotoxin production rate matches the cell division rate. When μ_(tox)/μ_c <1, the cyanotoxin cell quota decreases because either the nett cyanotoxin production rate is lower than the cell division rate, or metabolic breakdown and/or secretion of cyanotoxins is occurring. These fundamental equations describe cyanotoxin metabolism dynamics at the cellular level and provide the necessary physiological background to understand how environmental stressors drive changes in bloom toxicity.

Thermoelastic Analysis of Non-uniform Pressurized Functionally Graded Cylinder with Variable Thickness Using First Order Shear Deformation Theory(FSDT) and Perturbation Method

Recently application of functionally graded materials（FGMs） have attracted a great deal of interest. These materials are composed of various materials with different micro-structures which can vary spatially in FGMs. Such composites with varying thickness and non-uniform pressure can be used in the aerospace engineering. Therefore, analysis of such composite is of high importance in engineering problems. Thermoelastic analysis of functionally graded cylinder with variable thickness under non-uniform pressure is considered. First order shear deformation theory and total potential energy approach is applied to obtain the governing equations of non-homogeneous cylinder. Considering the inner and outer solutions, perturbation series are applied to solve the governing equations. Outer solution for out of boundaries and more sensitive variable in inner solution at the boundaries are considered. Combining of inner and outer solution for near and far points from boundaries leads to high accurate displacement field distribution. The main aim of this paper is to show the capability of matched asymptotic solution for different non-homogeneous cylinders with different shapes and different non-uniform pressures. The results can be used to design the optimum thickness of the cylinder and also some properties such as high temperature residence by applying non-homogeneous material.

Discrete Methods Based on First Order Reversal Curves to Identify Preisach Model of Smart Materials

Preisach model is widely used in modeling of smart materials. Although first order reversal curves （FORCs） have often found applications in the fields of physics and geology, they are able to serve to identify Preisach model. In order to clarify the relationship between the Preisach model and the first order reversal curves, this paper is directed towards： （1） giving the reason a first order reversal curve is introduced; （2） presenting, for identifying Preisach model, two discrete methods, which are analytically based on first order reversal curves. Herein also is indicated the solution＇s uniqueness of these two identifying methods. At last, the validity of these two methods is verified by simulating a real smart actuator both methods have been applied to.

THE INITIAL VALUE PROBLEMS OF FIRST ORDER IMPULSIVE DIFFERENTIAL EQUATIONS IN BANACH SPACES

In this paper, by using of monotone iterative technique, the existence and iterative approximation of the minimax quasi_solutions of the initial value problems for more general first order impulsive differential equations in Banach spaces are investigated.

A first order system model of fracture healing

A first order system model is proposed for simulating the influence of stress stimulation on fracture strength during fracture healing. To validate the model, the diaphyses of bilateral tibiae in 70 New Zealand rabbits were osteotomized and fixed with rigid plates and stress-relaxation plates, respectively. Stress shielding rate and ultimate bending strength of the healing bone were measured at 2 to 48 weeks postoperatively. Ratios of stress stimulation and fracture strength of the healing bone to those of intact bone were taken as the system input and output. The assumed first order system model can approximate the experimental data on fracture strength from the input of stress stimulation over time, both for the rigid plate group and the stress-relaxation plate group, with different system parameters of time constant and gain. The fitting curve indicates that the effect of mechanical stimulus occurs mainly in late stages of healing. First order system can model the stress adaptation process of fracture healing. This approach presents a simple bio-mathematical model of the relationship between stress stimulation and fracture strength, and has the potential to optimize planning of functional exercises and conduct parametric studies.

Riemann-Hilbert problem for first order complex equations of mixed type with degenerate curve

This paper considers the Riemann-Hilbert problem for linear mixed（elliptichyperbolic） complex equations of first order with degenerate curve in a simply connected domain. We first give the representation theorem and uniqueness of solutions for such boundary value problem. Then by using the methods of successive iteration and parameter extension, the existence of solutions for this problem is proved.

Applying First Order Predicate to the Semantic Query of Chinese

This paper described an approach to make inferences on Chinese information using first order predicate logic, which could be used in the semantic query of Chinese. The predicates of the method were derived from the natural language using rule based LFT, the axiom set was generated by extracting lexicon knowledge from HowNet, and the first order predicate inferences were made through symbol connection of center words. After all these were done, the evaluation and possible improvements of the method were provided. The experiment result shows a higher precision rate than that traditional methods can reach.

A Method to Improve First Order Approximation of Smoothed Particle Hydrodynamics

Smoothed particle hydrodynamics (SPH) is a useful meshless method.The first and second orders are the most popular derivatives of the field function in the mechanical governing equations.New methods were proposed to improve accuracy of SPH approximation by the lemma proved.The lemma describes the relationship of functions and their SPH approximation.Finally,the error comparison of SPH method with or without our improvement was carried out.

First order sensitivity analysis of magnetorheological fluid damper based on the output damping force

With many features,the magnetorheological fluid( MRF) damper is widely applied in the semiactive vibration control system. And sensitivity analysis is an important method to study the influence weight of various parameters on damping force characteristics. A mathematical model of the output damping force on the MRF damper is established by the mechanism modeling method,a first order output sensitivity equation is deduced and the expression of the first order output sensitivity function is obtained. The first-order sensitivity functions of ten design parameters are solved,and the influence degree of system parameters change on the output force of MRF damper is analyzed by comparing the sensitivity index of the parameters. Two sensitivities of vibration velocity and control current are obtained through experiment to prove the other parameters sensitivity analysis conclusion by analogy verification,which provides guidance for the structure optimization design of MRF damper.

MATHEMATICAL MODEL FOR THERMOKINETICS OF IRREVERSIBLE CONSECUTIVE FIRST ORDER REACTIONS

The mathematical model for the thermokinetics of irreversible consecutive first order reactions has been suggested,which was used for the calculation of rate constants and molar enthalpies of the two consecutive steps.And its validity has been verified by the ex- perimental results.

PIECEWISE SMOOTH SOLUTION OF THE FIRST ORDER SEMILINEAR HYPERBOLIC SYSTEMS IN HIGHER SPACE DIMENSION

It is important to study the propagation and interaction of progressing waves of nonlinear equations in the class of piecewise smooth function. However, there has not been many works on that in multidimensional case. In 1985, J, Rauch & M. Reed have provad the existence and uniqueness of piecewise smooth solution for

An Explicit Single-Step Nonlinear Numerical Method for First Order Initial Value Problems (IVPs)

Interest in the construction of efficient methods for solving initial value problems that have some peculiar properties with it or its solution is recently gaining wide popularity. Based on the assumption that the solution is representable by nonlinear trigonometric expressions, this work presents an explicit single-step nonlinear method for solving first order initial value problems whose solution possesses singularity. The stability and convergence properties of the constructed scheme are also presented. Implementation of the new method on some standard test problems compared with those discussed in the literature proved its accuracy and efficiency.

What Does a First Order Model Tell Us about PEEP Wave Maneuvers?

Patients with acute respiratory distress syndrome (ARDS) are currently treated with a lung protective ventilation strategy and the application of positive end-expiratory pressure (PEEP), sometimes in combination with recruitment maneuvers. In this study, the respiratory system elastance and airway resistance of each breath before, during and after a specific recruitment maneuver (PEEP wave maneuver) were analyzed in two patient groups, ARDS and control group. A reduction of elastance after the maneuver was observed in ARDS patients. In addition, only healthy lungs exhibited a reduction of the elastance during the course of the maneuver, while the lungs of ARDS patients didn’t show that reduction of elastance. The capability of PEEP wave maneuvers to improve lung ventilation was shown and the dynamic behavior of the elastance after the maneuver was illustrated. Healthy lungs adapt faster to changes in mechanical ventilation than the lungs of ARDS patients.

ON THE INITIAL VALUE PROBLEMS OF FIRST ORDERIMPULSIVE DIFFERENTIAL SYSTEMS

The purpose of this paper is to study the existence and iterative approximation of minimax quasi-solutions for a class of initial value problems of first order impulsive differential systems by using monotone iterative methods.

Approximate Solutions to the Discontinuous Riemann-Hilbert Problem of Elliptic Systems of First Order Complex Equations

Several approximate methods have been used to find approximate solutions of elliptic systems of first order equations. One common method is the Newton imbedding approach, i.e. the parameter extension method. In this article, we discuss approximate solutions to discontinuous Riemann-Hilbert boundary value problems, which have various applications in mechanics and physics. We first formulate the discontinuous Riemann-Hilbert problem for elliptic systems of first order complex equations in multiply connected domains and its modified well-posedness, then use the parameter extensional method to find approximate solutions to the modified boundary value problem for elliptic complex systems of first order equations, and then provide the error estimate of approximate solutions for the discontinuous boundary value problem.

First Order Phase Transitions as Radiation Processes

This paper presents new experimental evidence of the PeTa effect—infrared characteristic radiation under first order phase transitions, especially the crystallization of melts and the deposition and condensation of vapours/gases. The PeTa effect describes the transient radiation that a particle (i.e., atom, molecule or/and cluster) emits transient radiation during a transition from a meta-stable higher energetic level (in a super-cooled melt or a super-saturated vapour) to the stable condensed lower level (in a crystal or a liquid). The radiation removes latent heat with photons of characteristic frequencies that are generated under this transition. The abbreviation “PeTa effect” means Perel’man-Tatartchenko’s effect.

First Order Phase Transitions as Radiation Processes, Part Two

This paper presents new experimental results concerning the PeTa effect—infrared characteristic radiation under first order phase transitions, especially during deposition and condensation of vapours/gases and the crystallisation of melts. The abbreviation “PeTa effect” means Perel’man-Tatartchenko’s effect. The nature of the PeTa effect is transient radiation that a particle (i.e., atom, molecule or/and cluster) emits during a transition from a meta-stable higher energetic level (in a super-cooled melt or super-saturated vapour) to the stable condensed lower level (in a crystal or liquid). The radiation removes latent heat with photons of characteristic frequencies that are generated under this transition. This paper is the second in a set describing the appearance of PeTa radiation under air cooling with deposition and condensation of air components. The radiation was recorded using an IR Fourier Spectrometer with a highly sensitive MCT detector. Certain peculiarities of the recorded radiation as well as its applications in the physics of the atmospheres of Earth and Jupiter are analysed.

A New Modification of the Method of Lines for First Order Hyperbolic PDEs

A new modification of the Method of Lines is proposed for the solution of first order partial differential equations. The accuracy of the method is shown with the matrix analysis. The method is applied to a number of test problems, on uniform grids, to compare the accuracy and computational efficiency with the standard method.