Transient response of doubly-curved bio-inspired composite shells resting on viscoelastic foundation subject to blast load using improved first-order shear theory and isogeometric approach

Investigating natural-inspired applications is a perennially appealing subject for scientists. The current increase in the speed of natural-origin structure growth may be linked to their superior mechanical properties and environmental resilience. Biological composite structures with helicoidal schemes and designs have remarkable capacities to absorb impact energy and withstand damage. However, there is a dearth of extensive study on the influence of fiber redirection and reorientation inside the matrix of a helicoid structure on its mechanical performance and reactivity. The present study aimed to explore the static and transient responses of a bio-inspired helicoid laminated composite(B-iHLC) shell under the influence of an explosive load using an isomorphic method. The structural integrity of the shell is maintained by a viscoelastic basis known as the Pasternak foundation, which encompasses two coefficients of stiffness and one coefficient of damping. The equilibrium equations governing shell dynamics are obtained by using Hamilton's principle and including the modified first-order shear theory,therefore obviating the need to employ a shear correction factor. The paper's model and approach are validated by doing numerical comparisons with respected publications. The findings of this study may be used in the construction of military and civilian infrastructure in situations when the structure is subjected to severe stresses that might potentially result in catastrophic collapse. The findings of this paper serve as the foundation for several other issues, including geometric optimization and the dynamic response of similar mechanical structures.

Theory of Flexural Shear, Bending and Torsion for a Thin-Walled Beam of Open Section

Aspects of the general Vlasov theory are examined separately as applied to a thin-walled channel section cantilever beam under free-end end loading. In particular, the flexural bending and shear that arise under transverse shear and axial torsional loading are each considered theoretically. These analyses involve the location of the shear centre at which transverse shear forces when applied do not produce torsion. This centre, when taken to be coincident with the centre of twist implies an equivalent reciprocal behaviour. That is, an axial torsion applied concentric with the shear centre will twist but not bend the beam. The respective bending and shear stress conversions are derived for each action applied to three aluminium alloy extruded channel sections mounted as cantilevers with a horizontal principal axis of symmetry. Bending and shear are considered more generally for other thin-walled sections when the transverse loading axes at the shear centre are not parallel to the section = s centroidal axes of principal second moments of area. The fixing at one end of the cantilever modifies the St Venant free angular twist and the free warping displacement. It is shown from the Wagner-Kappus torsion theory how the end constrained warping generates an axial stress distribution that varies with the length and across the cross-section for an axial torsion applied to the shear centre. It should be mentioned here for wider applications and validation of the Vlasov theory that attendant papers are to consider in detail bending and torsional loadings applied to other axes through each of the centroid and the web centre. Therein, both bending and twisting arise from transverse shear and axial torsion applied to each position being displaced from the shear centre. Here, the influence of the axis position upon the net axial and shear stress distributions is to be established. That is, the net axial stress from axial torsional loading is identified with the sum of axial stress due to bending and axial stress arising from constrained warping displacements at the fixing. The net shear stress distribution overlays the distributions from axial torsion and that from flexural shear under transverse loading. Both arise when transverse forces are displaced from the shear centre.

Antiplane shear crack in a prestressed elastic medium based on the couple stress theory

A prestressed elastic medium containing a mode-Ⅲcrack is studied by means of the couple stress theory(CST).Based on the CST under initial stresses,a governing differential equation along with a mixed boundary value problem is established.The singularities of the couple stress and force stress near the crack tips are analyzed through the asymptotic crack-tip fields resulting from the characteristic expansion method.To determine their intensity,a hypersingular integral equation is derived and numerically solved with the help of the Chebyshev polynomial.The obtained results show a strong size-dependence of the out-of-plane displacement on the crack and the couple stress intensity factor(CSIF)and the force stress intensity factor(FSIF)around the crack tips.The symmetric part of the shear stress has no singularity,and the skew-symmetric part related to the couple stress exhibits an r^(-3/2)singularity,in which r is the distance from the crack tip.The initial stresses also affect the crack tearing displacement and the CSIF and FSIF.

Nonlinear dynamics of the reversed shear Alfvén eigenmode in burning plasmas

In a tokamak fusion reactor operated at steady state,the equilibrium magnetic field is likely to have reversed shear in the core region,as the noninductive bootstrap current profile generally peaks off-axis.The reversed shear Alfvén eigenmode(RSAE)as a unique branch of the shear Alfvén wave in this equilibrium,can exist with a broad spectrum in wavenumber and frequency,and be resonantly driven unstable by energetic particles(EP).After briefly discussing the RSAE linear properties in burning plasma condition,we review several key topics of the nonlinear dynamics for the RSAE through both wave-EP resonance and wave-wave coupling channels,and illustrate their potentially important role in reactor-scale fusion plasmas.By means of simplified hybrid MHD-kinetic simulations,the RSAEs are shown to have typically broad phase space resonance structure with both circulating and trapped EP,as results of weak/vanishing magnetic shear and relatively low frequency.Through the route of wave-EP nonlinearity,the dominant saturation mechanism is mainly due to the transported resonant EP radially decoupling with the localized RSAE mode structure,and the resultant EP transport generally has a convective feature.The saturated RSAEs also undergo various nonlinear couplings with other collective oscillations.Two typical routes as parametric decay and modulational instability are studied using nonlinear gyrokinetic theory,and applied to the scenario of spontaneous excitation by a finite amplitude pump RSAE.Multiple RSAEs could naturally couple and induce the spectral energy cascade into a low frequency Alfvénic mode,which may effectively transfer the EP energy to fuel ions via collisionless Landau damping.Moreover,zero frequency zonal field structure could be spontaneously excited by modulation of the pump RSAE envelope,and may also lead to saturation of the pump RSAE by both scattering into stable domain and local distortion of the continuum structure.

Size-dependent thermomechanical vibration characteristics of rotating pre-twisted functionally graded shear deformable microbeams

A three-dimensional(3D)thermomechanical vibration model is developed for rotating pre-twisted functionally graded(FG)microbeams according to the refined shear deformation theory(RSDT)and the modified couple stress theory(MCST).The material properties are assumed to follow a power-law distribution along the chordwise direction.The model introduces one axial stretching variable and four transverse deflection variables including two pure bending components and two pure shear ones.The complex modal analysis and assumed mode methods are used to solve the governing equations of motion under different boundary conditions(BCs).Several examples are presented to verify the effectiveness of the developed model.By coupling the slenderness ratio,gradient index,rotation speed,and size effect with the pre-twisted angle,the effects of these factors on the thermomechanical vibration of the microbeam with different BCs are investigated.It is found that with the increase in the pre-twisted angle,the critical slenderness ratio and gradient index corresponding to the thermal instability of the microbeam increase,while the critical material length scale parameter(MLSP)and rotation speed decrease.The sensitivity of the fundamental frequency to temperature increases with the increasing slenderness ratio and gradient index,and decreases with the other increasing parameters.Moreover,the size effect can suppress the dynamic stiffening effect and enhance the Coriolis effect.Finally,the mode transition is quantitatively demonstrated by a modal assurance criterion(MAC).

A new higher-order shear deformation theory and refined beam element of composite laminates

A new higher-order shear deformation theory based on global-local superposition technique is developed. The theory satisfies the free surface conditions and the geometric and stress continuity conditions at interfaces. The global displacement components are of the Reddy theory and local components are of the internal first to third-order terms in each layer. A two-node beam element based on this theory is proposed. The solutions are compared with 3D-elasticity solutions. Numerical results show that present beam element has higher computational efficiency and higher accuracy.

INVESTIGATION OF THE SCATTERING OF ANTI-PLANE SHEAR WAVES BY TWO GRIFFITH CRACKS USING THE NON-LOCAL THEORY

In this paper, the scattering of harmonic antiplane shear waves bytwo finite cracks is studied using the non-local theory. The Fouriertransform is applied and a mixed boundary value prob- lem isformulated. Then a set of triple integral equations is solved using anew method, namely Schimidt's method. This method is more exact andmore reasonable than Erigen's for solving this Kind of problem. Theresult of the stress near the crack tip was obtained. Contrary to theclassical elas- Ticity solution, it is found that no stresssingularity is present at the crack tip, which can explain theProblem of macroscopic and microscopic mechanics.

Size-dependent effect on biaxial and shear nonlinear buckling analysis of nonlocal isotropic and orthotropic micro-plate based on surface stress and modified couple stress theories using differential quadrature method

The size-dependent effect on the biaxial and shear nonlinear buckling analysis of an isotropic and orthotropic micro-plate based on the surface stress, the modified couple stress theory （MCST）, and the nonlocal elasticity theories using the differential quadrature method （DQM） is presented. Main advantages of the MCST over the classical theory （CT） are the inclusion of the asymmetric couple stress tensor and the consideration of only one material length scale parameter. Based on the nonlinear von Karman assumption, the governing equations of equilibrium for the micro-classical plate consid- ering midplane displacements are derived based on the minimum principle of potential energy. Using the DQM, the biaxial and shear critical buckling loads of the micro-plate for various boundary conditions are obtained. Accuracy of the obtained results is validated by comparing the solutions with those reported in the literature. A parametric study is conducted to show the effects of the aspect ratio, the side-to-thickness ratio, Eringen＇s nonlocal parameter, the material length scale parameter, Young＇s modulus of the surface layer, the surface residual stress, the polymer matrix coefficients, and various boundary conditions on the dimensionless uniaxial, biaxial, and shear critical buckling loads. The results indicate that the critical buckling loads are strongly sensitive to Eringen＇s nonlocal parameter, the material length scale parameter, and the surface residual stress effects, while the effect of Young＇s modulus of the surface layer on the critical buckling load is negligible. Also, considering the size dependent effect causes the increase in the stiffness of the orthotropic micro-plate. The results show that the critical biaxial buckling load increases with an increase in G12/E2 and vice versa for E1/E2. It is shown that the nonlinear biaxial buckling ratio decreases as the aspect ratio increases and vice versa for the buckling amplitude. Because of the most lightweight micro-composite materials with high strength/weight and stiffness/weight ratios, it is anticipated that the results of the present work are useful in experimental characterization of the mechanical properties of micro-composite plates in the aircraft industry and other engineering applications.

Thermoelastic Analysis of Non-uniform Pressurized Functionally Graded Cylinder with Variable Thickness Using First Order Shear Deformation Theory(FSDT) and Perturbation Method

Recently application of functionally graded materials（FGMs） have attracted a great deal of interest. These materials are composed of various materials with different micro-structures which can vary spatially in FGMs. Such composites with varying thickness and non-uniform pressure can be used in the aerospace engineering. Therefore, analysis of such composite is of high importance in engineering problems. Thermoelastic analysis of functionally graded cylinder with variable thickness under non-uniform pressure is considered. First order shear deformation theory and total potential energy approach is applied to obtain the governing equations of non-homogeneous cylinder. Considering the inner and outer solutions, perturbation series are applied to solve the governing equations. Outer solution for out of boundaries and more sensitive variable in inner solution at the boundaries are considered. Combining of inner and outer solution for near and far points from boundaries leads to high accurate displacement field distribution. The main aim of this paper is to show the capability of matched asymptotic solution for different non-homogeneous cylinders with different shapes and different non-uniform pressures. The results can be used to design the optimum thickness of the cylinder and also some properties such as high temperature residence by applying non-homogeneous material.

Finite element analysis of functionally graded sandwich plates with porosity via a new hyperbolic shear deformation theory

This study focusses on establishing the finite element model based on a new hyperbolic sheareformation theory to investigate the static bending,free vibration,and buckling of the functionally graded sandwich plates with porosity.The novel sandwich plate consists of one homogenous ceramic core and two different functionally graded face sheets which can be widely applied in many fields of engineering and defence technology.The discrete governing equations of motion are carried out via Hamilton’s principle and finite element method.The computation program is coded in MATLAB software and used to study the mechanical behavior of the functionally graded sandwich plate with porosity.The present finite element algorithm can be employed to study the plates with arbitrary shape and boundary conditions.The obtained results are compared with available results in the literature to confirm the reliability of the present algorithm.Also,a comprehensive investigation of the effects of several parameters on the bending,free vibration,and buckling response of functionally graded sandwich plates is presented.The numerical results shows that the distribution of porosity plays significant role on the mechanical behavior of the functionally graded sandwich plates。

Gao's interacting shear flows( ISF) theory and its inferences and their applications

Gao＇s viscous/in-viscid interacting shear flows （ISF） theory, proposed by professor Gao Zhi in Institute of Mechanics, China Academy of Science, and its inferences and their applications in computational fluid dynamics （CFD） are reviewed and some subjects worthy to be studied are pro- posed in this paper. The flow-field and motion law of ISF, mathematics definition of strong viscous shear layer flow in ISF, ISF equations, wall-surface compatibility criteria （Gao＇s criteria ）, space scale variety law of strong viscous shear layer reveals flow mechanism and local space small scale triggered by strong interaction that cause some abnormal severe local pneumatic heating phenomenon in hypersonic flow. Gao＇s ISF theory was used in near wall flow, free ISF flow simulation and design of computing grids, Gao＇s wall-surface criteria were used to verify calculation reliability and accuracy of near wall flows, ISF theory approximate analytical result of shock waves-boundary layer interac- tion and ISF equations were used to obtain the numerical exact solution of local area flow （ such as stationary point flow）. Some new subjects, such as, improving near-wall turbulent models according to the turbulent flow simulation satisfying the wall-criteria and illustrating relation between grid-con- vergence based on the wall criteria and other convergence tactics, are suggested. The necessity of applying Gao＇s ISF theory and wall criteria is revealed. Difficulties and importance of hypersonic vis- cous/in-viscid interaction phenomenon were also emphasized.

KRMN-TYPE EQUATIONS FOR A HIGHER-ORDER SHEARDEFORMATION PLATE THEORY AND ITS USE IN THE THERMAL POSTBUCKLING ANALYSIS

arman-type nonlinear large deflection equations are derived occnrding to theReddy's higher-order shear deformation plate theory and used in the thermal postbuckling analysis The effects of initial geometric imperfections of the plate areincluded in the present study which also includes th thermal effects.Simply supported,symmetric cross-ply laminated plates subjected to uniform or nomuniform parabolictemperature distribution are considered. The analysis uses a mixed GalerkinGolerkinperlurbation technique to determine thermal buckling louds and postbucklingequilibrium paths.The effects played by transverse shear deformation plate aspeclraio, total number of plies thermal load ratio and initial geometric imperfections arealso studied.

Bending and stress analysis of polymeric composite plates reinforced with functionally graded graphene platelets based on sinusoidal shear-deformation plate theory

The bending and stress analysis of a functionally graded polymer composite plate reinforced with graphene platelets are studied in this paper.The governing equations are derived by using principle of virtual work for a plate which is rested on Pasternak’s foundation.Sinusoidal shear deformation theory is used to describe displacement field.Four different distribution patterns are employed in our analysis.The analytical solution is presented for a functionally graded plate to investigate the influence of important parameters.The numerical results are presented to show the deflection and stress results of the problem for four employed patterns in terms of geometric parameters such as number of layers,weight fraction and two parameters of Pasternak’s foundation.

Introduction of Simulating the Motion of Rigid Ellipsoidal Objects in Ductile Shear Zone Based on the Jeffery's Theory

Rigid ellipsoidal objects(gravels and porphyroclasts)in ductile zone is an important factor to indicate the kinematics and dynamics.Jeffery’s theory(Jeffery G,1922),a quantitative research method,for the rotation ofthe rigid objects(no deformation)in the Newtonian fluid of the simple deformation field has been widely applied by geologists to the study of fabrics in rocks.The theory

弹性支撑功能梯度压电多孔微圆柱壳的自由振动分析

旨在研究热-力-电载荷下弹性支撑功能梯度压电多孔微圆柱壳的自由振动。首先,建立弹性支撑功能梯度压电多孔微圆柱壳动力学模型;然后,应用三阶剪切变形壳体理论和修正的偶应力理论,推出弹性支撑功能梯度压电多孔微圆柱壳模态频率的解析解;最后,通过数值算例分析了微圆柱壳模态频率的影响因素。结果表明:Pasternak弹性支撑比Winkler弹性支撑更有利于提高微圆柱壳的模态频率;改变弹性支撑的刚度系数、轴向力、外加电压、孔隙分布、材料体积分数指数和结构尺寸可调节微圆柱壳的模态频率;孔隙体积分数越大,温度或轴向力对模态频率的影响越大,而电压对模态频率的影响则越小;不同材料指数下,增大孔隙体积分数对模态频率的影响趋势不同;弹性支撑会减弱温度、轴向力和电压对模态频率的影响,对薄圆柱壳或短圆柱壳模态频率的影响较为显著。

压电集成石墨烯增强功能梯度多孔板的等几何建模与分析

基于等几何分析方法和一种仅含有4自由度的简化一阶剪切变形理论(simple first-order shear deformation theory,S-FSDT)建立了压电集成石墨烯增强功能梯度多孔(piezoelectric integrated graphene platelets reinforced functionally graded porous,P-GPLs-FGP)板的数值分析模型。利用Halpin-Tsai微观力学模型、闭胞体高斯随机场理论和混合定律得到了石墨烯增强功能梯度多孔板的有效材料属性;基于等几何分析方法、S-FSDT和哈密顿原理推导了P-GPLs-FGP板的运动控制方程,并通过与已有算例对比验证了模型的准确性和有效性;利用所建模型分析了孔隙分布形式、孔隙系数、石墨烯分布形式、石墨烯质量分数、边界条件和宽厚比对P-GPLs-FGP板固有频率和机-电载荷作用下静态弯曲响应的影响。研究结果表明:板的刚度与孔隙系数成反比,而在基体材料中添加少量的石墨烯可以有效地增强结构的刚度;与其他组合形式相比,板的刚度在孔隙PD-S分布和石墨烯GPL-S分布时最大。

隧道穿越岩堆体围岩剪切特性及分级

为解决隧道穿越岩堆体围岩分级不准确的问题,通过相似材料直剪试验分析岩堆体的直剪特性,将含水率和填充土含量两个因素带入熵权可拓物元法,并结合地质指标进行分级研究。结果表明岩堆体的抗剪强度随着含水率、填充土含量的增大,先增大后减小,最终趋于平稳,过高或过低的含水率和填充土都会“弱化”岩堆体的抗剪强度。根据岩堆体的特点,选取岩石单轴饱和抗压强度、节理裂隙密度、岩体完整性系数、含水率和填充土含量作为分级指标,结合熵权可拓物元法,将所选指标和熵权可拓物元法结合并在工程实例进行验证,分级结果比原方法准确性更好,证明研究提出的围岩分级方法是合理可行的。研究结果能够为岩堆体隧道的围岩分级提供指导,为施工设计和支护方式提供依据。

功能梯度多孔磁电弹板的等几何建模与自由振动分析

针对功能梯度多孔磁电弹(functional graded porous-magneto electro elastic,FGP-MEE)板结构,该文基于等几何分析法(isogeometric analysis,IGA),采用一阶剪切变形理论(first-order shear deformation theory,FSDT)建立了等几何数值分析模型。首先,根据修正幂律(modified power law,MPL)方法得到了具有4种不同孔隙分布形式(V_(u),V_(o),V_(x),V_(v))功能梯度多孔磁电弹结构的等效材料参数;然后,利用磁-电-弹耦合本构方程、哈密顿变分原理以及等几何分析方法推导了FGP-MEE板的控制方程,并通过与已有文献对比,验证了所建模型的有效性和准确性;最后,研究了孔隙系数、功能梯度指数、孔隙分布形式、结构的几何参数(宽厚比、长宽比)以及边界条件对FGP-MEE板自由振动的影响。研究结果表明,材料中孔隙分布形式、孔隙系数以及功能梯度指数的变化对FGP-MEE板的固有频率有较大影响,且在孔隙呈V_o型分布时板的固有频率最大。

Shear hydrophobic flocculation and flotation of ultrafine Anshan hematite using sodium oleate

Effects of stirring speed and time, pH and sodium oleate concentration on the shear hydrophobic flocculation of ultrafine Anshan hematite with sodium oleate as the surfactant were discussed. The results show that these parameters significantly affect the shear hydrophobic flocculation of ultrafine hematite. The optimum conditions for the flocculation are： stirring speed 1 400 r/min, flocculation time 20 min, pH 9 and sodium oleate concentration 3.94×10-4 mol/L; the flotation recovery of hematite flocs is remarkably high compared with non flocculated ultrafine hematite. According to the extended DLVO theory, the total interaction potential of Anshan ultrafine hematite was determined. The calculation results indicate that the hydrophobic flocculation state of the ultrafine hematite-sodium oleate system is mainly dominated by electric double layer repulsive interaction potential and hydrophobic interaction potential. A mechanical agitation is required to impart particles a kinetic energy to overcome potential barrier between them due to the existence of electric double layer repulsive interaction potential. Those particles further approach to form flocs due to the significant increase of the hydrophobic interaction potential.

基于固有频率的错断式坠落危岩体稳定系数计算模型

错断式坠落危岩体的安全稳定程度受后缘裂缝深度控制,基于静力学的稳定系数计算可得到后缘裂隙深度临界值,但静力学计算方法无法得到裂隙深度的实时变化。基于修正Timoshenko梁建立岩梁动力学方程,结合动力基础半空间理论对岩梁的约束刚度及边界条件做深入分析,得到不同裂缝深度条件下危岩体固有频率理论解析。基于数值计算验证固有频率算法的正确性,并得出结论:随裂隙深度增大,固有频率不断降低,固有频率对危岩体后缘裂隙深度变化较为敏感,根据危岩体的固有频率值可反算危岩体后缘裂隙深度。基于固有频率与危岩体后缘裂隙深度之间的关系建立错断式坠落危岩体稳定系数计算模型,并采用室内试验进行验证,得出结论:危岩体固有频率与其后缘裂隙深度近似为负线性相关。基于固有频率的错断式坠落危岩体稳定系数计算模型可为危岩体自动化监测提供有益借鉴。