Bamendou (West Cameroon), has a huge potential in natural resources, especially sands. However, the use of these materials in civil engineering works leads to the appearance of numerous pathologies which in some cases...Bamendou (West Cameroon), has a huge potential in natural resources, especially sands. However, the use of these materials in civil engineering works leads to the appearance of numerous pathologies which in some cases lead to the total ruin of the works. In order to overcome these infrastructural problems, the main objective of this study is set at the improvement of the service life of structures built in Cameroon using local materials formed under climatic, geological and geotechnical conditions similar to those of materials in Bamendou. Eight sand samples were taken from the most representative and exploited quarries. The identification and classification of the sand taken from the most representative quarries in the study area show that they are mainly clayey, with an average sand equivalent of 57.54. In terms of granulometry, the curves of several sand samples do not fall within the granular range of sands used in the formulation of concrete. The modulus of fineness obtained by particle size analysis varies from 2.91 to 3.92 with an average of 3.31.展开更多
Gap debris as discharge product is closely related to machining process in electrical discharge machining（EDM）. A lot of recent researches have focused on the relationship among debris size, surfaces texture, remove...Gap debris as discharge product is closely related to machining process in electrical discharge machining（EDM）. A lot of recent researches have focused on the relationship among debris size, surfaces texture, remove rate, and machining stability. The study on statistical distribution of debris size contributes to the research, but it is still superficial currently. In order to obtain the distribution law of the debris particle size, laser particle size analyzer（LPSA） combined with scanning electron microscope（SEM） is used to analyze the EDM debris size. Firstly, the heating dried method is applied to obtain the debris particles. Secondly, the measuring range of LPSA is determined as 0.5–100 μm by SEM observation, and the frequency distribution histogram and the cumulative frequency distribution scattergram of debris size are obtained by using LPSA. Thirdly, according to the distribution characteristic of the frequency distribution histogram, the statistical distribution functions of lognormal, exponentially modified Gaussian（EMG）, Gamma and Weibull are chosen to achieve curve fitting of the histogram. At last, the distribute law of the debris size is obtained by fitting results. Experiments with different discharge parameters are carried out on an EDM machine designed by the authors themselves, and the machining conditions are tool electrode of red-copper material, workpiece of ANSI 1045 material and working fluid of de-ionized water. The experimental results indicate that the debris sizes of all experiment sample truly obey the Weibull distribution. The obtained distribution law is significantly important for all the models established based on the debris particle size.展开更多
Terrain characteristics can be accurately represented in spectrum space. Terrain spectra can quantitatively reflect the effect of topographic dynamic forcing on the atmosphere. In wavelength space, topographic spectra...Terrain characteristics can be accurately represented in spectrum space. Terrain spectra can quantitatively reflect the effect of topographic dynamic forcing on the atmosphere. In wavelength space, topographic spectral energy decreases with decreasing wavelength, in spite of several departures. This relationship is approximated by an exponential function. A power law relationship between the terrain height spectra and wavelength is fitted by the least-squares method, and the fitting slope is associated with grid-size selection for mesoscale models. The monotonicity of grid size is investigated, and it is strictly proved that grid size increases with increasing fitting exponent, indicating that the universal grid size is determined by the minimum fitting exponent. An example of landslide-prone areas in western Sichuan is given, and the universal grid spacing of 4.1 km is shown to be a requirement to resolve 90% of terrain height variance for mesoscale models, without resorting to the parameterization of subgrid-scale terrain variance. Comparison among results of different simulations shows that the simulations estimate the observed precipitation well when using a resolution of 4.1 km or finer. Although the main flow patterns are similar, finer grids produce more complex patterns that show divergence zones, convergence zones and vortices. Horizontal grid size significantly affects the vertical structure of the convective boundary layer. Stronger vertical wind components are simulated for finer grid resolutions. In particular, noticeable sinking airflows over mountains are captured for those model configurations.展开更多
文摘Bamendou (West Cameroon), has a huge potential in natural resources, especially sands. However, the use of these materials in civil engineering works leads to the appearance of numerous pathologies which in some cases lead to the total ruin of the works. In order to overcome these infrastructural problems, the main objective of this study is set at the improvement of the service life of structures built in Cameroon using local materials formed under climatic, geological and geotechnical conditions similar to those of materials in Bamendou. Eight sand samples were taken from the most representative and exploited quarries. The identification and classification of the sand taken from the most representative quarries in the study area show that they are mainly clayey, with an average sand equivalent of 57.54. In terms of granulometry, the curves of several sand samples do not fall within the granular range of sands used in the formulation of concrete. The modulus of fineness obtained by particle size analysis varies from 2.91 to 3.92 with an average of 3.31.
基金supported by Research Fund for the Doctoral Program of Ministry of Education of China(Grant No.20090041110031)National Natural Science Foundation of China(Grant No.50575033)
文摘Gap debris as discharge product is closely related to machining process in electrical discharge machining（EDM）. A lot of recent researches have focused on the relationship among debris size, surfaces texture, remove rate, and machining stability. The study on statistical distribution of debris size contributes to the research, but it is still superficial currently. In order to obtain the distribution law of the debris particle size, laser particle size analyzer（LPSA） combined with scanning electron microscope（SEM） is used to analyze the EDM debris size. Firstly, the heating dried method is applied to obtain the debris particles. Secondly, the measuring range of LPSA is determined as 0.5–100 μm by SEM observation, and the frequency distribution histogram and the cumulative frequency distribution scattergram of debris size are obtained by using LPSA. Thirdly, according to the distribution characteristic of the frequency distribution histogram, the statistical distribution functions of lognormal, exponentially modified Gaussian（EMG）, Gamma and Weibull are chosen to achieve curve fitting of the histogram. At last, the distribute law of the debris size is obtained by fitting results. Experiments with different discharge parameters are carried out on an EDM machine designed by the authors themselves, and the machining conditions are tool electrode of red-copper material, workpiece of ANSI 1045 material and working fluid of de-ionized water. The experimental results indicate that the debris sizes of all experiment sample truly obey the Weibull distribution. The obtained distribution law is significantly important for all the models established based on the debris particle size.
基金supported by the Key Research Program of the Chinese Academy of Sciences (Grant No. KZZD-EW-05-01)the special grant (Grant No. 41375052) from the National Natural Science Foundation of Chinafunded by an open project of the State Key Laboratory of Severe Weather (Grant No. 2013LASW-A06)
文摘Terrain characteristics can be accurately represented in spectrum space. Terrain spectra can quantitatively reflect the effect of topographic dynamic forcing on the atmosphere. In wavelength space, topographic spectral energy decreases with decreasing wavelength, in spite of several departures. This relationship is approximated by an exponential function. A power law relationship between the terrain height spectra and wavelength is fitted by the least-squares method, and the fitting slope is associated with grid-size selection for mesoscale models. The monotonicity of grid size is investigated, and it is strictly proved that grid size increases with increasing fitting exponent, indicating that the universal grid size is determined by the minimum fitting exponent. An example of landslide-prone areas in western Sichuan is given, and the universal grid spacing of 4.1 km is shown to be a requirement to resolve 90% of terrain height variance for mesoscale models, without resorting to the parameterization of subgrid-scale terrain variance. Comparison among results of different simulations shows that the simulations estimate the observed precipitation well when using a resolution of 4.1 km or finer. Although the main flow patterns are similar, finer grids produce more complex patterns that show divergence zones, convergence zones and vortices. Horizontal grid size significantly affects the vertical structure of the convective boundary layer. Stronger vertical wind components are simulated for finer grid resolutions. In particular, noticeable sinking airflows over mountains are captured for those model configurations.
