Density functional theory study of influence of impurity on electronic properties and reactivity of pyrite

The electronic property of pyrite supercell containing As,Se,Te,Co or Ni hetero atoms were calculated using density functional theory（DFT）,and the reactivities of pyrite with oxygen and xanthate were discussed by frontier orbital methods.The cell volume expands due to the presence of impurity.Co and Ni mainly affect the bands near Fermi levels,while As mainly affects the shallow and deep valence bands,and Se and Te mainly affect the deep valence bands.Electronic density analysis suggests that there exists a strong covalent interaction between hetero atom and its surrounding atoms.By frontier orbital calculation,it is suggested that As,Co and Ni have greater influence on the HOMO and LUMO of pyrite than Se and Te.In addition,pyrite containing As,Co or Ni is easier to oxidize by oxygen than pyrite containing Se or Te,and pyrite containing Co or Ni has greater interaction with collector.These are in agreement with the observed pyrite practice.

Density Functional Theory Study on Electronic and Magnetic Properties of Mn-doped （MgO）n （n=2-10） Clusters

We study the geometries, stabilities, electronic and magnetic properties of （MgO）n （n=2-10） clusters doped with a single Mn atom using the density functional theory with the gener- alized gradient approximation. The optimized geometries show that the impurity Mn atom prefers to replace the Mg atom which has low coordination number in all the lowest-energy MnMgn-1On （n=2-10） structures. The stability analysis clearly represents that the average binding energies of the doped clusters are larger than those of the corresponding pure （MgO）n clusters. Maximum peaks of the second order energy differences are observed for MnMg~_1On clusters at n=6, 9, implying that these clusters exhibit higher stability than their neighboring clusters. In addition, all the Mn-doped Mg clusters exhibit high total magnetic moments with the exception of MnMgO2 which has 3.00μB. Their magnetic behavior is attributed to the impurity Mn atom, the charge transfer modes, and the size of MnMgn- 1On clusters.

Investigations of phase transition, elastic and thermodynamic properties of GaP by using the density functional theory

The phase transition of gallium phosphide （GAP） from zinc-blende （ZB） to a rocksalt （RS） structure is investigated by the plane-wave pseudopotential density functional theory （DFT）. Lattice constant a0, elastic constants cij, bulk modulus B0 and the pressure derivative of bulk modulus B0 are calculated. The results are in good agreement with numerous experimental and theoretical data. From the usual condition of equal enthalpies, the phase transition from the ZB to the RS structure occurs at 21.9 GPa, which is close to the experimental value of 22.0 GPa. The elastic properties of GaP with the ZB structure in a pressure range from 0 GPa to 21.9 GPa and those of the RS structure in a pressure range of pressures from 21.9 GPa to 40 GPa are obtained. According to the quasi-harmonic Debye model, in which the phononic effects are considered, the normalized volume V/Vo, the Debye temperature 8, the heat capacity Cv and the thermal expansion coefficient a are also discussed in a pressure range from 0 CPa to 40 GPa and a temperature range from 0 K to 1500 K.

Spectroscopic Properties and Judd-Ofelt Theory Analysis of Er^(3+)-Doped Heavy Metal Oxyfluoride Silicate Glass

Er^(3+)-doped heavy metal oxyfluoride silicate glass was fabricated and characterized, and the absorption spectrum and fluorescence spectrum of the glass were studied. The Judd-Ofelt intensity parameters Ω_t (t =2, 4, 6), spontaneous transition probability, fluorescence branching ratio and radiative lifetime of each energy levels for Er^(3+) were calculated by Judd-Ofelt theory, and stimulated emission cross-section of (()~4I_(13/2))→(()~4I_(15/2)) transition was calculated by McCumber theory. The results show that fluorescence full width at half maximum and stimulated emission cross-section of Er^(3+)-doped heavy metal oxyfluoride silicate glass are broad and large, respectively. Compared with other host glasses, the gain bandwidth property of Er^(3+)-doped heavy metal oxyfluoride silicate glass is close to those of tellurite and bismuth glasses, and has advantage over those of silicate, phosphate and germante glasses.

Structure,electronic,and nonlinear optical properties of superalkaline M_(3)O(M=Li,Na)doped cyclo[18]carbon

Cyclo[18]carbon has received considerable attention thanks to its novel geometric configuration and special electronic structure.Superalkalis have low ionization energy.Doping a superalkali in cyclo[18]carbon is an effective method to improve the optical properties of the system because considerable electron transfer occurs.In this paper,the geometry,bonding properties,electronic structure,absorption spectrum,and nonlinear optical(NLO)properties of superalkaline M_(3)O(M=Li,Na)-doped cyclo[18]carbon were studied by using density functional theory.M_(3)O and the C_(18) rings are not coplanar.The C_(18) ring still exhibits alternating long and short bonds.The charge transfer between M_(3)O and C_(18) forms stable[M_(3)O]+[C_(18)]-ionic complexes.C_(18)M_(3)O(M=Li,Na)shows striking optical nonlinearity,i.e.,their first-and second-order hyperpolarizability(βvec andγ||)increase considerably atλ=1907 nm and 1460 nm.

Investigation of the structural, electronic and mechanical properties of CaO–SiO_(2) compound particles in steel based on density functional theory

CaO–SiO_(2)compounds compromise one of the most common series of oxide particles in liquid steels, which could significantly affect the service performance of the steels as crack initiation sites. However, the structural, electronic, and mechanical properties of the compounds in CaO–SiO_(2)system are still not fully clarified due to the difficulties in the experiments. In this study, a thorough investigation of these properties of CaO–SiO_(2)compound particles in steels was conducted based on first-principles density functional theory. Corresponding phases were determined by thermodynamic calculation, including gamma dicalcium silicate(γ-C2S), alpha-prime(L) dicalcium silicate(αL′-C2S), alpha-prime(H) dicalcium silicate(αH′-C2S), alpha dicalcium silicate(α-C2S), rankinite(C3S2), hatrurite(C3S), wollastonite(CS), and pseudowollastonite(Ps-CS). The results showed that the calculated crystal structures of the eight phases agree well with the experimental results. All the eight phases are stable according to the calculated formation energies, and γ-C2S is the most stable. O atom contributes the most to the reactivity of these phases. The Young’s modulus of the eight phases is in the range of 100.63–132.04 GPa. Poisson’s ratio is in the range of0.249–0.281. This study provided further understanding concerning the CaO–SiO_(2)compound particles in steels and fulfilled the corresponding property database, paving the way for inclusion engineering and design in terms of fracture-resistant steels.

Mechanical Properties of Simple s-p Metals, and Defect Energies from Electron Theory and from Interatomic Force Laws

The cleavage force F(z) needed to separate parallel atomic planes by a distance z is first discussed for simple s-p metals using density functional theory.For the s-p nearly free-electron metals the linearized Thomas-Fermi equation is solved self-consistently in the cases of (a) semi-infinite planes of jellium (i.e. smeared uniform positive ions) and (b) a semi-infinite cylinder of finite radius, cleaved by a plane perpendicular to its axis. In (a), the elastic region has the form F(z)=Az ∝ Zrs-11/2, where rs is the mean interelectronic distance in the jellium model. Size effects are then considered, with possible relevance to atomic force microscopy.Defect energies are treated, using both electron theory and pair force laws.

Effect of Exchange-Correlation Functional on the Structural, Mechanical, and Optoelectronic Properties of Orthorhombic RbSrBr3 Perovskite

In the present study, the effect of the exchange-correlation functional on the structural, mechanical, and optoelectronic properties of orthorhombic RbSrBr3 perovskite has been investigated using various functionals in Density Functional Theory (DFT) with the CASTEP code. The optimized lattice parameters are quite similar for all the functionals. The electronic properties have shown that RbSrBr3 perovskite is a wide direct band gap compound with a band gap energy ranging from 4.296 eV to 4.494 eV for all the functionals. The mechanical parameters like elastic constants, Young’s modulus, Shear modulus, Poisson’s ratio, Pugh’s ratio, and an anisotropic factor reveal that the RbSrBr3 perovskite has ductile behavior and an anisotropic nature which signifies the mechanical stability of the compound. The Debye temperature might withstand lattice vibration heat. High absorption coefficient (>104 cm−1), high optical conductivity, and very low reflectivity have been found in the RbSrBr3 perovskite for all functions. The computed findings on the RbSrBr3 perovskite suggested that the presented studied material is potentially applicable for photodetector and optoelectronic devices.

Density Function Theory Study of Electronic,Optical and Thermodynamic Properties of CaN_2,SrN_2 and BaN_2

We put forward a first-principles density-functional theory about the impact of pressure on the structural and elastic properties of bulk CaN2,SrN2 and BaN2.The ground state properties of three alkaline earth diazenides were obtained,and these were in good agreement with previous experimental and theoretical data.By using the quasi-harmonic Debye model,the thermodynamic properties including the debye temperature ΘD,thermal expansion coefficient α,and gruneisen parameter y are successfully obtained in the temperature range from 0 to 100 K and pressure range from 0 to 100 GPa,respectively.The optical properties including dielectric function ε（ω）,absorption coefficient α（ω）,reflectivity coefficient R（ω）,and refractive index n（ω） are also calculated and analyzed.

Structures and electronic properties of Si_m N_(8-m)(0

The geometries, electronic structures and related properties of SimN8-m（0 〈 m 〈 8） clusters are studied using density functional theory （DFT） with hybrid functional B3LYP. The calculated results reveal several trends. For any stoichiometric clusters, the lowest energy isomers with an alteration of N and Si atoms are favourable in energy if the numbers of Si and N atoms are large enough to form ... Si N-Si-N... alternative chains. The bond lengths of single Si-N bonds are very close to the corresponding values of the bulk and other SiN clusters. The geometries for N-rich and Si4N4 clusters are planar structures, but three-dimensional structures are favourable in energy for Si-rich clusters. With the increase of m, the isotropic polarizability and average polarizability increase, the total binding energies generally decrease, the HOMO-LUMO gap and vertical ionization potential oscillate with increasing number of valence electrons, and their values with even valence electrons are larger than those with odd valence electrons. The atomic charges, IR and Raman properties are also reported.

Study on lattice vibrational properties and Raman spectra of Bi_2Te_3 based on density-functional perturbation theory

We present a variational density-functional perturbation theory （DFPT） to investigate the lattice dynamics and vibra- tional properties of single crystal bismuth telluride material. The phonon dispersion curves and phonon density of states （DOS） of the material were obtained. The phonon dispersions are divided into two fields by a phonon gap. In the lower field, atomic vibrations of both Bi and Te contribute to the DOS. In the higher field, most contributions come from Te atoms. The calculated Born effective charges and dielectric constants reveal a great anisotropy in the crystal. The largest Born effective charge generates a significant dynamic charge transferring along the c axis. By DFPT calculation, the greatest LO-TO splitting takes place in the infrared phonon modes and reaches 1.7 THz in the Brillouin zone center. The Raman spectra and peaks corresponding to respective atomic vibration modes were found to be in good agreement with the experimental data.

Theoretical Study on the Optical Properties for 2,7- and 3,6-Linked Carbazole Trimers by Time-dependent Density Functional Theory

Electronic properties, such as HOMO and LUMO energies, band gaps, ionization potential （IP） and electron affinity （EA） of 2,7- and 3,6-1inked carbazole trimers, two conjugated oligomcrs with different linkages of carbazole, were studicd by the density functional theory with Becke-Lee-Young-Parr composite exchange correlation functional （B3LYP）. The absorption spectra of these compounds were also investigated by time-dependent density functional theory （TD-DFT） with 6-3 IG＊ basis set. The calculated results indicated that the HOMO and LUMO of the 2,7- and 3,6-1inked carbazole trimers are both slightly destabilized on going from methyl substitution to sec-butyl substitution. Both IP and EA exhibit their good hole-transporting but poor electronaccepting ability. The presence of alkyl groups on the nitrogen atoms does not affect the intra-chain electronic delocalization along the molecular frame. Thus no significant effect on the band gap and absorption spectra of compounds has been found.

Electronic and Optical Properties of Rocksalt CdO: A first-Principles Density-Functional Theory Study

The structural, electronic and optical properties of rocksalt CdO have been studied using the plane-wave-based pseudo-potential density functional theory within generalized gradient approximation. The calculated lattice parameters are in agreement with previous experimental work. The band structure, density of states, and Mulliken charge population are obtained, which indicates that rocksalt CdO having the properties of a halfmetal due to an indirect band gap of -0.51eV. The mechanical properties show that rocksalt CdO is mechanically stable, isotropic and malleable. Significantly, we propose a correct value for ε1(0) of about 4.75, which offers theoretical data for the design and application for rocksalt CdO in optoelectronic materials.

Research and Prediction on the Properties of Concrete at Cryogenic Temperature Based on Gray Theory

To solve the cryogenic temperature problems faced by all-concrete liquefied natural gas(ACLNG)storage tanks during servicing,a low temperature resistant and high strength concrete(LHC)was designed from the perspectives of reducing water-binder ratio,removing coarse aggregates,optimizing composite mineral admixture and utilizing steel fibers.The variation laws of compressive and tensile strength,elastic modulus and Poisson’s ratio for C60 concrete and LHC were compared and analyzed under the temperatures from 10 to-165℃through uniaxial compression and tensile tests.The rapid freezing method was adopted to analyze the evolution process of mass and relative dynamic elastic modulus loss rates for C60 and LHC in 0-300 freeze-thaw cycles.The gas permeability test was carried out,and the laws of gas permeability coefficient varied with temperature and cryogenic freeze-thaw cycles were obtained.Then,the grey dynamic model GM(1,1)was used to predict the variation laws of physical and mechanical parameters on the basis of the test data.The test results demonstrate that the compressive strength,elastic modulus and Poisson’s ratio for both C60 and LHC increase significantly from 10 to-165℃,but the specific variation laws are difierent,and there is a phenomenon that some parameters decrease after reaching a critical temperature range for C60.The uniaxial tensile strength increases first and then decreases as temperature decreases,and finally increases slightly at-165℃for both C60 and LHC.The mass and relative dynamic elastic modulus loss rates of LHC are much lower than that of C60 under different freeze-thaw cycles.The gas permeability coefficient of C60 declines gradually with the drop of temperature,and increases gradually with the number of freeze-thaw cycles while the gas permeability coefficient of LHC basically remains stable and is much lower than that of C60.Therefore,such a conclusion can be drawn that LHC has better properties at cryogenic temperature.On the premise of providing consistent functional mode,GM(1,1)can predict the test data with high accuracy,which well reflects the variation laws of relevant parameters.

Analysis of the Relationship between Mechanical Properties and Pore Structure of MSW Incineration Bottom Ash Fine Aggregate Concrete after Freeze-Thaw Cycles Based on the Gray Theory

The destruction of concrete building materials in severely cold regions of the north is more severely affected by freeze-thaw cycles,and the relationship between the mechanical properties and pore structure of concrete with fine aggregate from municipal solid waste(MSW)incineration bottom ash after freeze-thaw cycles is analyzed under the degree of freeze-thaw hazard variation.In this paper,the gray correlation method is used to calculate the correlation between the relative dynamic elastic modulus,compressive strength,and microscopic porosity parameters to speculate on the most important factors affecting their changes.The GM(1,1)model was established based on the compressive strength of the waste incineration ash aggregate concrete,the relative error between the simulated and actual values in the model was less than 5%,and the accuracy of the model was level 1,indicating that the GM(1,1)model can well reflect the change in the compressive strength of the MSW incineration bottom ash aggregate concrete during freeze-thaw cycles.Using the gray correlation method,the correlation between the relative dynamic elastic modulus,compressive strength,air content,specific surface area,pore spacing coefficient,and pore average chord length was calculated,and the pore spacing coefficient and pore average chord length were determined to be highly correlated with each other.This determination can help analyze and infer the deterioration mechanism of concrete subject to freeze-thaw cycles.These results can provide a theoretical basis for guiding the engineering practice of concrete with fine aggregates of household bottom ash in the northern cold region.

Structures, stabilities, and electronic properties of F-doped Sin （n=1～12） clusters：Density functional theory investigation

The geometries, stabilities, and electronic properties of FSin （n=1～12） clusters are systematically investigated by using first-principles calculations based on the hybrid density-functional theory at the B3LYP/6-311G level. The geometries are found to undergo a structural change from two-dimensional to three-dimensional structure when the cluster size n equals 3. On the basis of the obtained lowest-energy geometries, the size dependencies of cluster properties, such as averaged binding energy, fragmentation energy, second-order energy difference, HOMO–LUMO （highest occupied molecular orbital–lowest unoccupied molecular orbital） gap and chemical hardness, are discussed. In addition, natural population analysis indicates that the F atom in the most stable FSin cluster is recorded as being negative and the charges always transfer from Si atoms to the F atom in the FSin clusters.

Comparison of the Linear Sigma Model and Chiral Perturbation Theory for Nucleon Properties

We compare the static nucleon properties in the Chiral Perturbation Theory (χPT) and the Linear Sigma Model (LSM). We consider a chiral model for the nucleon which is based on the linear sigma model with scalar-isoscalar and scalarisovector mesons coupled to quarks. We have solved the field equations in the mean field approximation for the hedgehog baryon state with different sets of model parameters. A good investigation of some static nucleon properties is obtained by the LSM.

Effect of Pressure on Electronic Structures and Optical Properties of Rocksalt InN

The electronic structures and optical properties of rocksalt indium nitride （INN） under pressure were studied using the first-principles calculation by considering the exchange and correlation potentials with the generalized gradient approximation. The calculated lattice constant shows good agreement with the experimental value. It is interestingly found that the band gap energy Eg at the F or X point remarkably increases with increasing pressure, but Eg at the L point does not increase obviously. The pressure coefficient of Eg is calculated to be 44 meV/GPa at the F point. Moreover, the optical properties of rocksalt InN were calculated and discussed based on the calculated band structures and electronic density of states.

Chemical bonding and elastic properties of quaternary arsenide oxides YZnAsO and LaZnAsO investigated by first principles

The structural parameters, chemical bonding and elastic properties of the tetragonal phase quaternary arsenide oxides YZnAsO and LaZnAsO were investigated by using density-functional theory （DFT） within generalized gradient approximation （GGA）. The GGA calculated structural parameters are in agreement with the experimental results. Population analysis suggests that the chemical bonding in YZnAsO and LaZnAsO can be classified as a mixture of ionic and covalent characteristic. Single-crystal elastic constants were calculated and the polycrystalline elastic modules were estimated according to Voigt, Reuss and Hill＇s approximations （VRH）. The result shows that both YZnAsO and LaZnAsO are relatively soft materials exhibiting ductile behavior. The calculated polycrystalline elastic anisotropy result shows that LaZnAsO is more anisotropy in compressibility and YZnAsO is more anisotropy in shear.