期刊文献+
共找到239篇文章
< 1 2 12 >
每页显示 20 50 100
Characteristics of flame spread over the surface of charring solid combustibles at high altitude 被引量:9
1
作者 LI Jie JI Jie ZHANG Ying SUN JinHua 《Chinese Science Bulletin》 SCIE EI CAS 2009年第11期1957-1962,共6页
To explore the characteristics of flame spread over the surface of charring solid combustibles at high altitude, the whitewood with uniform texture was chosen to conduct a series of experiments in Lhasa and Hefei, wit... To explore the characteristics of flame spread over the surface of charring solid combustibles at high altitude, the whitewood with uniform texture was chosen to conduct a series of experiments in Lhasa and Hefei, with altitude of 3658 m and 50 m respectively. Several parameters, including the flame height, flame spread rate, flame temperature, surface temperature, were measured on samples with different width and inclinations. A quantitative analysis of flame spread characteristics over sample surface at high altitude was performed. Results showed that, in the environment of lower pressure and oxygen concentration at high altitude, the flame height and flame spread rate over sample surface decreased, but the flame temperature increased slightly. However, with increasing of sample width, the relative difference between the flame spread rates at different altitudes decreased. 展开更多
关键词 火焰高度 传播特性 固体燃料 表面 炭化 火焰传播速度 高海拔地区 高空
原文传递
Analysis of flame spread over aviation kerosene 被引量:8
2
作者 ZHOU JieBo CHEN GuoQing +3 位作者 LI PeiMing CHEN Bing WANG ChangJiang LU ShouXiang 《Chinese Science Bulletin》 SCIE EI CAS 2010年第17期1822-1827,共6页
Flame spread behaviors and temperature rise of fuel surface were experimentally investigated. A series of tests on aviation kerosene pool fires were conducted by using the schlieren image system, micro-thermocouple an... Flame spread behaviors and temperature rise of fuel surface were experimentally investigated. A series of tests on aviation kerosene pool fires were conducted by using the schlieren image system, micro-thermocouple and infrared thermal imager. The velocity evolutions of flame spread and surface flow under different initial fuel temperatures were discussed. The characteristics of fuel surface temperature rise were revealed, and it was found that the preheating effect of surface flow on fuel decreased with increasing initial fuel temperature. 展开更多
关键词 航空煤油 火焰蔓延 燃料流量 温度上升 红外热成像仪 微型热电偶 火焰传播 图像系统
原文传递
Flame spread over the surface of thermal insulation materials in different environments 被引量:10
3
作者 HUANG XinJie SUN JinHua JI Jie ZHANG Ying WANG QingSong ZHANG Yi 《Chinese Science Bulletin》 SCIE EI CAS 2011年第15期1617-1622,共6页
Experiments were conducted in a plateau area in Lhasa and a plain area in Hefei China to investigate the flame spread characteristics on thermal insulation materials under different environmental conditions (pressure ... Experiments were conducted in a plateau area in Lhasa and a plain area in Hefei China to investigate the flame spread characteristics on thermal insulation materials under different environmental conditions (pressure and oxygen concentration).Molded polystyrene foam (EPS) and extruded polystyrene foam (XPS) samples were placed horizontally on a small-scale flame spread experimental bench.Changes in the average length of the pool fire,flame spread speed,average flame height,and length of preheating zone were used to determine the effect of the plateau and plain environments on flame spread characteristics.These parameters were all larger in Hefei than in Lhasa,which indicates the fire hazard in Hefei will be higher than that in Lhasa if insulation materials of the same size are used. 展开更多
关键词 火焰蔓延 保温材料 环境 聚苯乙烯泡沫塑料 表面 平均长度 火焰传播速度 平原地区
原文传递
Effects of sample width on flame spread over horizontal charring solid surfaces on a plateau 被引量:4
4
作者 ZHANG Ying JI Jie HUANG XinJie SUN JinHua 《Chinese Science Bulletin》 SCIE EI CAS 2011年第9期919-924,共6页
Experiments were conducted on the Tibetan Plateau to investigate the effects of sample width (W) on flame spread over horizontal charring solid surfaces. The results show that the rate of spread is influenced by the c... Experiments were conducted on the Tibetan Plateau to investigate the effects of sample width (W) on flame spread over horizontal charring solid surfaces. The results show that the rate of spread is influenced by the combined effects of convection heat transfer and flame radiation. Moreover, two different regimes depending on sample width were found in flame spread behavior. The rate of spread decreased with width in the convective regime (W≤3 cm) but increased in the radiative regime (W>3 cm). Similar results were observed in comparative experiments conducted on a plain in Hefei, with the rate of spread reaching its minimum value at W=4 cm rather than 3 cm. 展开更多
关键词 火焰传播 试样宽度 固体表面 青藏高原 炭化 样品 火焰辐射 对流换热
原文传递
Numerical Simulation of Microgravity Flame Spread Over Solid Combustibles 被引量:2
5
作者 JIANGXi FANWeicheng 《Journal of Thermal Science》 SCIE EI CAS CSCD 1995年第2期141-149,共9页
Numerical Simulation of Microgravity Flame Spread Over Solid CombustiblesNumericalSimulationofMicrogravityFl... Numerical Simulation of Microgravity Flame Spread Over Solid CombustiblesNumericalSimulationofMicrogravityFlameSpreadOverSoli... 展开更多
关键词 火焰扩展 易燃固体 燃烧
原文传递
Experimental study of flame spread over oil floating on water 被引量:1
6
作者 GUO Jin LU ShouXiang +2 位作者 ZHOU JieBo LI ManHou WANG ChangJian 《Chinese Science Bulletin》 SCIE EI CAS 2012年第9期1083-1087,共5页
The phenomena and mechanism of flame spread over oil floating on water were studied using temperature measurements made by fine thermocouples and an infrared camera,schlieren images of surface convection and video rec... The phenomena and mechanism of flame spread over oil floating on water were studied using temperature measurements made by fine thermocouples and an infrared camera,schlieren images of surface convection and video recordings of flame spread.The experimental results reveal that the floating-oil depth greatly affects the average rate of flame spread and average flame pulsation wavelength.The surface tension effect is the main cause of surface convection,which controls flame spread.Momentum loss and heat loss from forward-flowing hot oil to water play an important role in retarding flame spread for oil thicknesses less than about 8 mm. 展开更多
关键词 火焰传播 实验 过油 火焰蔓延 表面张力 平均波长 红外摄像机
原文传递
Flame Spread over Aviation Kerosene with an Obstacle in Liquid Phase
7
作者 Jin GUO Shouxiang LU +1 位作者 Manhou LI Changjian WANG 《Journal of Thermal Science》 SCIE EI CAS CSCD 2011年第6期543-547,共5页
The phenomena of flame spread over aviation kerosene with an obstacle in liquid phase are investigated experimentally through surface temperature measurement by using infrared camera,schlieren images of subsurface flo... The phenomena of flame spread over aviation kerosene with an obstacle in liquid phase are investigated experimentally through surface temperature measurement by using infrared camera,schlieren images of subsurface flow in front of and behind obstacle and residence time of flame obtained from video recording.Experimental results reveal that obstacle has no effect on gas phase controlled flame spread.But for liquid phase controlled flame spread,flame can be stopped by an obstacle with its top edge flush with oil surface,and the residence time decreases with the increase of initial temperature of fuel.That conduction and radiation only play a subsidiary role in flame spread over liquid fuel was proved by schlieren images and surface temperature profiles. 展开更多
关键词 火焰传播 航空煤油 液相 表面温度分布 测量实验 纹影图像 停留时间 火焰蔓延
原文传递
Effect of ambient pressure and radiation reabsorption of atmosphere on the flame spreading over thermally thin combustibles in microgravity
8
作者 杜文峰 胡文瑞 《Science China(Technological Sciences)》 SCIE EI CAS 2003年第4期381-390,共10页
For the flame spread over thermally thin combustibles in an atmosphere, if the atmosphere cannot emit and absorb the thermal radiation (e.g. for atmosphere of O2-N2), the conductive heat transfer from the flame to the... For the flame spread over thermally thin combustibles in an atmosphere, if the atmosphere cannot emit and absorb the thermal radiation (e.g. for atmosphere of O2-N2), the conductive heat transfer from the flame to the fuel surface dominates the flame spread at lower ambient atmosphere. As the ambient pressure increases, the flame spread rate increases, and the radiant heat transfer from the flame to the fuel surface gradually becomes the dominant driving force for the flame spread. In contrast, if the atmosphere is able to emit and absorb the thermal radiation (e.g. for atmosphere of O2-CO2), at lower pressure, the heat transfer from flame to the fuel surface is enhanced by the radiation reabsorption of the atmosphere at the leading edge of the flame, and both conduction and thermal radiation play important roles in the mechanism of flame spread. With the increase in ambient pressure, the oxygen diffuses more quickly from ambient atmosphere into the flame, the chemical reaction in the flame is enhanced, and the flame spread rate increases. When the ambient pressure is greater than a critical value, the thermal radiation from the flame to the solid surface is hampered by the radiation reabsorption of ambient atmosphere with the further increase in ambient pressure. As a result, with the increase in ambient pressure, the flame spread rate decreases and the heat conduction gradually dominates the flame spread over the fuel surface. 展开更多
关键词 flame spread RADIATION reabsorption microgravity.
原文传递
一种提高镁合金零部件抗火焰蔓延性的尺寸设计类判据
9
作者 胡波 韩嘉璇 +6 位作者 李德江 李子昕 曾小勤 丁文江 林占宏 金晨 赵寿 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2024年第4期1123-1135,共13页
基于能量守恒定律提出了一种用于预测棒状镁合金样品火焰蔓延时间的判据,该判据表明火焰蔓延时间主要受合金材料和样品尺寸影响。控制体的初始温度和起燃温度以及样品的S/l_c比值(样品横截面面积/横截面周长)是火焰蔓延时间的决定性因... 基于能量守恒定律提出了一种用于预测棒状镁合金样品火焰蔓延时间的判据,该判据表明火焰蔓延时间主要受合金材料和样品尺寸影响。控制体的初始温度和起燃温度以及样品的S/l_c比值(样品横截面面积/横截面周长)是火焰蔓延时间的决定性因素。火焰蔓延时间正比于ΔH(将单位质量的样品从初始温度加热到起燃温度所需的能量)和S/l_c比值,这在Mg-8.5Al-0.5Zn-0.2Mn、Mg-2.7Nd-0.4Zn-0.6Zr和Mg-4.0Y-3.3Nd-0.5Zr镁合金中得到验证。对于尺寸相同的样品,Mg-8.5Al-0.5Zn-0.2Mn合金样品有着最大的ΔH以及最长的火焰蔓延时间;对于材质、长度和横截面面积相同的样品,圆形横截面样品的S/lc比值最大,其抗火焰蔓延性能也最佳。 展开更多
关键词 镁合金零部件 抗火焰蔓延性 显微组织 尺寸设计 判据
下载PDF
液体燃料表面脉动火焰蔓延机理数值研究
10
作者 单聪慧 张慧颖 +2 位作者 程崇律 徐宝鹏 赵广 《推进技术》 EI CAS CSCD 北大核心 2024年第5期145-155,共11页
针对液体表面火焰蔓延提出了一种基于气液两相耦合的三维数值模拟模型,并针对低于闪点温度的液体燃料表面脉动火焰蔓延机理进行了数值研究。本文提出的数值方法成功捕捉到脉动火焰蔓延现象,预测的火焰蔓延脉动频率及传播速率与实验值吻... 针对液体表面火焰蔓延提出了一种基于气液两相耦合的三维数值模拟模型,并针对低于闪点温度的液体燃料表面脉动火焰蔓延机理进行了数值研究。本文提出的数值方法成功捕捉到脉动火焰蔓延现象,预测的火焰蔓延脉动频率及传播速率与实验值吻合良好。本研究表明:火焰前锋后方存在显著横向对流流动,促进从慢速蔓延向快速蔓延的转变;气液两相中的回流区是成对出现的,即使在快速蔓延阶段火焰前锋下方仍然存在较小的气相回流区;火焰前锋前方的表面对流流动强度不是始终单调衰减的,在慢速蔓延阶段存在“双峰流动”特征;火焰前锋前方的液面温度是单调下降的,不存在温度“波谷”,温度“波谷”的发现是存在薄热边界层和实验手段无法分辨薄边界层中的温度梯度导致的。 展开更多
关键词 火焰蔓延 热毛细效应 浮力效应 闪点温度 数值模拟
下载PDF
双层外立面对竖直向下火蔓延影响的实验研究
11
作者 闫维纲 温晨煜 +1 位作者 俞潇远 吴习 《山东理工大学学报(自然科学版)》 CAS 2024年第5期25-32,共8页
通过实验研究了层间效应对聚甲基丙烯酸甲酯向下火蔓延特性的影响。在6组不同立面间距的条件下,对火焰高度、温度、质量损失速率和火蔓延速率等参数进行研究,建立了传热物理模型并进行理论分析,得到了聚甲基丙烯酸甲酯在预热区和热解区... 通过实验研究了层间效应对聚甲基丙烯酸甲酯向下火蔓延特性的影响。在6组不同立面间距的条件下,对火焰高度、温度、质量损失速率和火蔓延速率等参数进行研究,建立了传热物理模型并进行理论分析,得到了聚甲基丙烯酸甲酯在预热区和热解区的辐射、对流热反馈的函数表达式。实验结果表明:随着外立面之间间距的增大,火焰厚度减小,火焰形状发生不规则变化;质量损失速率的对数与火焰高度的对数呈线性关系;在间距不同的情况下,火焰的最高温度保持不变;随着间距的增加,火蔓延速率分3个阶段逐渐下降。理论分析表明:间距变化时,对流和辐射热反馈所占主导地位不同,当间距大于6 cm时,辐射热反馈几乎可以忽略不计,且理论分析与实验结果一致。 展开更多
关键词 双层外立面 层间效应 质量损失速率 火蔓延速率 火蔓延模型
下载PDF
管廊内电缆内热源燃烧过程数值模拟研究 被引量:1
12
作者 钟委 郭超杰 +1 位作者 马文辉 高子鹤 《中国安全科学学报》 CAS CSCD 北大核心 2023年第10期86-93,共8页
为预防综合管廊局部空间内部电缆火灾事故的发生,运用火灾动力学模拟软件(FDS)三维传热和热解模型,对15 kV铜芯电缆着火过程建模分析,分析不同条件下电缆温度分布、热解气体分布以及热释放速率(HRR)曲线,以及热源功率大小和持续时间对... 为预防综合管廊局部空间内部电缆火灾事故的发生,运用火灾动力学模拟软件(FDS)三维传热和热解模型,对15 kV铜芯电缆着火过程建模分析,分析不同条件下电缆温度分布、热解气体分布以及热释放速率(HRR)曲线,以及热源功率大小和持续时间对电缆燃烧过程的影响。结果表明:随着热源功率的增加,电缆着火时间缩短,火灾危险性增加;HRR峰值和最大火蔓延长度(FSL)随着热源功率的增加呈线性增长;及时阻断热源功率可有效预防火灾的发生;热源功率消失后的火焰残留时间随着热源功率持续时间的增加整体呈现先上升后下降的趋势。 展开更多
关键词 管廊 电缆着火 热源功率 燃烧过程 数值模拟 火蔓延 火焰残留
下载PDF
狭长空间内220 kV大截面电缆火灾燃烧特点及烟气控制实验研究 被引量:1
13
作者 陈长坤 徐童 +3 位作者 高飞 左博元 仪涛 杜武豪 《中国安全生产科学技术》 CAS CSCD 北大核心 2023年第5期157-163,共7页
为避免或减小狭长空间内高压电缆发生火灾的可能性,建立实验模型,研究狭长空间内220 kV大截面电缆燃烧行为及火蔓延规律,分析电缆火灾下狭长空间顶棚温度分布特征,结合电缆燃烧过程,设置5种不同排烟风速,探究排烟风速对其排烟效率的影... 为避免或减小狭长空间内高压电缆发生火灾的可能性,建立实验模型,研究狭长空间内220 kV大截面电缆燃烧行为及火蔓延规律,分析电缆火灾下狭长空间顶棚温度分布特征,结合电缆燃烧过程,设置5种不同排烟风速,探究排烟风速对其排烟效率的影响。研究结果表明:大截面电缆阻燃外护套受火后会形成高温熔融物,滴落在底板上的高温熔融物燃烧形成的火焰不断撞击电缆底部,在电缆底部形成的拓展火焰持续加热,引燃电缆外护套的未燃段,进而导致电缆外护套底部火焰在热对流和辐射的作用下稳定蔓延;狭长空间顶棚温度峰值及熔滴火焰前锋位置随着电缆阻燃外护套的持续燃烧不断推移;大截面电缆火焰蔓延速度呈现先增大、后稳定、再减小趋势;电缆燃烧过程中会产生大量有毒烟气,采用侧向排烟模式能够有效降低狭长空间内烟气浓度。研究结果可为狭长空间内敷设电缆的消防排烟设计提供参考。 展开更多
关键词 狭长空间 220 kV大截面电缆 火灾蔓延速度 烟气控制
下载PDF
基于燃烧相互作用的PMMA相向火蔓延特性实验研究
14
作者 刘琼 张蓉 《中国安全生产科学技术》 CAS CSCD 北大核心 2023年第3期144-149,共6页
为探究耦合燃烧作用对固体可燃物火蔓延的影响,开展基于燃烧相互作用的聚甲基丙烯酸甲酯(polymethyl methacrylate,PMMA)相向火蔓延特性实验研究。通过对不同宽度PMMA板进行相向火蔓延实验,获取火焰图像、温度场、质量损失速率等燃烧特... 为探究耦合燃烧作用对固体可燃物火蔓延的影响,开展基于燃烧相互作用的聚甲基丙烯酸甲酯(polymethyl methacrylate,PMMA)相向火蔓延特性实验研究。通过对不同宽度PMMA板进行相向火蔓延实验,获取火焰图像、温度场、质量损失速率等燃烧特性参数,分析相向火蔓延的过程特点与燃烧机理。研究结果表明:相向火蔓延过程中存在4个典型阶段,即快速发展阶段、相对稳定阶段、相互作用阶段、融合燃尽阶段;PMMA板宽度对相向火蔓延燃烧特性的影响较为显著,体现在热解区长度、相对稳定状态维持时间、质量损失速率等参数变化上。研究结果可为建筑物保温材料的火灾预防抑制提供参考。 展开更多
关键词 PMMA 火蔓延 燃烧特性
下载PDF
不同倾角铜铟镓硒光伏组件燃烧行为的试验研究
15
作者 张培红 张锋泽 +1 位作者 富雨生 李子建 《安全与环境学报》 CAS CSCD 北大核心 2023年第3期723-730,共8页
为加强对于光伏组件火灾危险性的控制,进一步推动光伏建筑一体化技术的广泛应用,选择不同倾角布置的铜铟镓硒光伏组件为研究对象,改变倾斜角度,通过对引燃时间、火蔓延速度和质量损失速率等参数的测试和分析,研究铜铟镓硒光伏组件的燃... 为加强对于光伏组件火灾危险性的控制,进一步推动光伏建筑一体化技术的广泛应用,选择不同倾角布置的铜铟镓硒光伏组件为研究对象,改变倾斜角度,通过对引燃时间、火蔓延速度和质量损失速率等参数的测试和分析,研究铜铟镓硒光伏组件的燃烧行为及传热机制。结果表明,倾角的增大加剧了光伏组件火灾蔓延的危险性。光伏组件迎火面的引燃时间随倾角增大呈先减小后增大的变化趋势,倾角从0°增加到45°,引燃时间减少16.39%;倾角从45°增加到90°,引燃时间增加76.47%。背火面向上火蔓延速度随倾角增大而增大,倾角为90°时最大,为18.08 mm/s,横向火蔓延速度受倾角影响较小,均为1 mm/s左右;当光伏组件倾角增加,燃烧产生的熔融滴落物形成池火是造成光伏组件火灾危险性加剧的重要原因。 展开更多
关键词 安全工程 铜铟镓硒光伏组件 倾斜角度 引燃 燃烧行为 火蔓延速度
下载PDF
森林抚育对滇中地区潜在树冠火的影响
16
作者 张运生 舒立福 +2 位作者 赵凤君 郭万力 刘柯珍 《森林工程》 北大核心 2023年第5期1-10,共10页
通过实地测量和试验室测定,比较森林抚育前后枝下高及火行为的差异,定量分析森林抚育前后发生潜在树冠火的可能性,为定量评价森林抚育效果提供依据。在云南森林自然中心选择5个林班,根据林班森林可燃物分布情况,采取不同森林抚育方式进... 通过实地测量和试验室测定,比较森林抚育前后枝下高及火行为的差异,定量分析森林抚育前后发生潜在树冠火的可能性,为定量评价森林抚育效果提供依据。在云南森林自然中心选择5个林班,根据林班森林可燃物分布情况,采取不同森林抚育方式进行森林可燃物调控。通过对5个林班中39个小班森林抚育前后枝下高、可燃物载量等调查,计算出森林抚育前后地表可燃物的热值、林火强度、林火蔓延速度和火焰高度。对比分析结果表明,1)森林抚育前柏木(Cypress)林和华山松(Pinus armandii)林平均枝下高分别为0.30 m和1.43 m,模拟的地表火火焰高度分别为0.34 m和0.67 m。抚育前柏木林和华山松林有很大的树冠火发生隐患;2)抚育后的柏木林,枝下高1.50 m左右,与地表火焰间的距离由-0.04 m增加到1.34 m,较大地降低了高强度树冠火发生的隐患;3)抚育后的华山松林,枝下高2.02 m左右,与地表火焰间的距离增加到1.68 m,高强度树冠火发生的隐患也得到了很大程度降低。通过森林抚育,有效减少了地表可燃物载量和提高枝下高的高度,从而有效降低了发生树冠火的可能性。 展开更多
关键词 森林抚育 树冠火 枝下高 火强度 火蔓延速度 火焰高度
下载PDF
局部构型影响固体材料可燃特性实验研究
17
作者 吴传嘉 朱凤 王双峰 《燃烧科学与技术》 CAS CSCD 北大核心 2023年第6期653-659,共7页
以凹槽和凸台为研究对象,对具有局部构型的平板开展可燃特性研究,特别开展了火焰向下传播和熄灭实验.火焰传播分为两个阶段,初始阶段棱角处火焰传播速度比平面快,一段时间后,整个火焰锋面达到与棱角处火焰相同的传播速度.考虑棱角结构... 以凹槽和凸台为研究对象,对具有局部构型的平板开展可燃特性研究,特别开展了火焰向下传播和熄灭实验.火焰传播分为两个阶段,初始阶段棱角处火焰传播速度比平面快,一段时间后,整个火焰锋面达到与棱角处火焰相同的传播速度.考虑棱角结构与圆柱表面火焰传播相似,将棱角等效成圆柱建立了火焰传播模型,可准确预测具有局部构型材料的火焰传播速度.棱角结构对可燃极限影响并不显著,局部最薄或最窄的尺度决定其极限氧气浓度. 展开更多
关键词 材料构型 火焰传播 可燃极限 等效圆柱
下载PDF
试样宽度与外加辐射耦合作用下热塑性聚合物水平火蔓延特性研究
18
作者 张笑男 徐斌雁 +2 位作者 杨峰歌 杨阳 周洋 《中国安全生产科学技术》 CAS CSCD 北大核心 2023年第8期73-79,共7页
为探究试样宽度与外加辐射耦合作用下热塑性聚合物水平火蔓延特性,通过开展3种热塑性聚合物PP、PMMA和PS水平火蔓延实验,研究不同类型、不同宽度的试样在不同外加辐射耦合作用下的火焰高度、火蔓延速度和质量损失速率等特性的变化规律... 为探究试样宽度与外加辐射耦合作用下热塑性聚合物水平火蔓延特性,通过开展3种热塑性聚合物PP、PMMA和PS水平火蔓延实验,研究不同类型、不同宽度的试样在不同外加辐射耦合作用下的火焰高度、火蔓延速度和质量损失速率等特性的变化规律。研究结果表明:其水平火蔓延过程大致可分为发展、稳定蔓延和衰退3个阶段;在辐射传热与对流传热的竞争机制下,试件宽度从4 cm增至6 cm时,PP在外加辐射强度为7.5,10.0 kW/m^(2)下的火蔓延速度和质量损失速率均出现减小的情形;PMMA和PS的火蔓延速度和质量损失速率均随着外加辐射强度的增大而增大;PMMA和PS的质量损失速率随着试样宽度的增大而增大;热薄型PP和PMMA在火蔓延过程中的质量损失速率与理论计算结果吻合良好。研究结果可为热塑性聚合物在建筑工程中的实际应用和高层建筑的建筑防火设计提供一定参考。 展开更多
关键词 热塑性聚合物 水平火蔓延 试样宽度 外加辐射
下载PDF
1 kV配电电缆的电弧引燃过程研究
19
作者 徐志豪 朱振宇 +1 位作者 靖子洋 吴淑群 《火灾科学》 CAS 北大核心 2023年第3期135-143,共9页
电弧引燃电缆是造成电缆火灾的重要因素,威胁电力设备的安全运行与电力可靠供应。为了探索配电电缆的电弧引燃机理,构建了电弧引燃1 kV配电电缆实验平台,结合火灾动力学仿真,初步研究了电弧引燃电缆过程中的点燃、火焰蔓延及温度场分布... 电弧引燃电缆是造成电缆火灾的重要因素,威胁电力设备的安全运行与电力可靠供应。为了探索配电电缆的电弧引燃机理,构建了电弧引燃1 kV配电电缆实验平台,结合火灾动力学仿真,初步研究了电弧引燃电缆过程中的点燃、火焰蔓延及温度场分布,进一步探索了电弧火源功率对电弧引燃电缆过程的影响。结果发现功率为300 W的电弧火源能够在10 s内引燃1 kV聚氯乙烯护套电力电缆,电缆引燃后最高温度达900℃。随着电弧火源功率增大,电弧引燃电缆时间显著减小,并进一步获得了引燃该电力电缆所需的临界电弧功率。运用FDS仿真电弧引燃电缆过程,实验与仿真结果基本一致:当电弧功率从21.93 W减小到7.15 W时,实验点火时间从19 s增加到57 s,仿真点火时间从15.3 s增加到55.9 s;当电弧功率低于7.15 W时,实验和仿真电缆均无法引燃。 展开更多
关键词 高压放电 电力电缆 电缆火灾 火焰蔓延 电弧引燃 火灾模拟
下载PDF
金属氧化物对镁粉尘层火蔓延的增强机制
20
作者 陈洋洋 孟凡一 +1 位作者 蔡景治 苑春苗 《东北大学学报(自然科学版)》 EI CAS CSCD 北大核心 2023年第12期1778-1784,共7页
易分解的固体惰化剂会增加镁粉尘层的燃烧强度,为探究不易分解的金属氧化物对镁粉尘层燃烧是否具有抑制效应,选用TiO_(2),MgO,CaO进行实验研究.结果表明:TiO_(2),MgO,CaO在质量分数小于75%时均大幅增强镁粉尘层火蔓延的燃烧强度,火焰相... 易分解的固体惰化剂会增加镁粉尘层的燃烧强度,为探究不易分解的金属氧化物对镁粉尘层燃烧是否具有抑制效应,选用TiO_(2),MgO,CaO进行实验研究.结果表明:TiO_(2),MgO,CaO在质量分数小于75%时均大幅增强镁粉尘层火蔓延的燃烧强度,火焰相态由纯镁粉尘层燃烧时的表面非均相燃烧转变为气相燃烧;TiO_(2)通过与镁粉发生化学反应增强火蔓延行为,在TiO_(2)和Mg恰好完全反应(TiO_(2)质量分数为63%)的工况下粉尘层火蔓延速率增加了50余倍;MgO,CaO通过增大镁粉颗粒间距,减缓了镁粉燃烧产物形成致密氧化层,从而增强镁粉尘层火蔓延行为.实际生产过程应高度关注镁粉尘与金属氧化物的接触工况,研究结果能够为镁粉尘防护提供理论基础. 展开更多
关键词 粉尘层火灾 金属氧化物 镁粉尘 火蔓延速率 火焰形态
下载PDF
上一页 1 2 12 下一页 到第
使用帮助 返回顶部