Leakage Proof,Flame-Retardant,and Electromagnetic Shield Wood Morphology Genetic Composite Phase Change Materials for Solar Thermal Energy Harvesting

Phase change materials(PCMs)offer a promising solution to address the challenges posed by intermittency and fluctuations in solar thermal utilization.However,for organic solid-liquid PCMs,issues such as leakage,low thermal conductivity,lack of efficient solar-thermal media,and flamma-bility have constrained their broad applications.Herein,we present an innova-tive class of versatile composite phase change materials(CPCMs)developed through a facile and environmentally friendly synthesis approach,leveraging the inherent anisotropy and unidirectional porosity of wood aerogel(nanowood)to support polyethylene glycol(PEG).The wood modification process involves the incorporation of phytic acid(PA)and MXene hybrid structure through an evaporation-induced assembly method,which could impart non-leaking PEG filling while concurrently facilitating thermal conduction,light absorption,and flame-retardant.Consequently,the as-prepared wood-based CPCMs showcase enhanced thermal conductivity(0.82 W m^(-1)K^(-1),about 4.6 times than PEG)as well as high latent heat of 135.5 kJ kg^(-1)(91.5%encapsula-tion)with thermal durability and stability throughout at least 200 heating and cooling cycles,featuring dramatic solar-thermal conversion efficiency up to 98.58%.In addition,with the synergistic effect of phytic acid and MXene,the flame-retardant performance of the CPCMs has been significantly enhanced,showing a self-extinguishing behavior.Moreover,the excellent electromagnetic shielding of 44.45 dB was endowed to the CPCMs,relieving contemporary health hazards associated with electromagnetic waves.Overall,we capitalize on the exquisite wood cell structure with unidirectional transport inherent in the development of multifunctional CPCMs,showcasing the operational principle through a proof-of-concept prototype system.

Flame-retardant ammonium polyphosphate/MXene decorated carbon foam materials as polysulfide traps for fire-safe and stable lithium-sulfur batteries

Lithium-sulfur(Li-S)batteries are one of the most promising modern-day energy supply systems because of their high theoretical energy density and low cost.However,the development of high-energy density Li-S batteries with high loading of flammable sulfur faces the challenges of electrochemical performance degradation owing to the shuttle effect and safety issues related to fire or explosion accidents.In this work,we report a three-dimensional(3D)conductive nitrogen-doped carbon foam supported electrostatic self-assembled MXene-ammonium polyphosphate(NCF-MXene-APP)layer as a heat-resistant,thermally-insulated,flame-retardant,and freestanding host for Li-S batteries with a facile and costeffective synthesis method.Consequently,through the use of NCF-MXene-APP hosts that strongly anchor polysulfides,the Li-S batteries demonstrate outstanding electrochemical properties,including a high initial discharge capacity of 1191.6 mA h g^(-1),excellent rate capacity of 755.0 mA h g^(-1)at 1 C,and long-term cycling stability with an extremely low-capacity decay rate of 0.12%per cycle at 2 C.More importantly,these batteries can continue to operate reliably under high temperature or flame attack conditions.Thus,this study provides valuable insights into the design of safe high-performance Li-S batteries.

Flame-retardant oligomeric electrolyte additive for self-extinguishing and highly-stable lithium-ion batteries:Beyond small molecules

Preparing both safe and high-performance lithium-ion batteries(LIBs) based on commonly used commercial electrolytes is highly desirable,yet challenging.To overcome the poor compatibility of conventional small-molecular flame-retardants as electrolyte additives for safe LIBs with graphite anodes,in this study,we propose and design a novel low-cost flame-retardant oligomer that achieves an accurate and complete reconciliation of fire safety and electrochemical performance in LIBs.Owing to the integration of phosphonate units and polyethylene glycol(PEG) chains,this oligomer,which is a phosphonatecontaining PEG-based oligomer(PPO),not only endows commercial electrolytes with excellent flame retardancy but also helps stabilize the electrodes and Li-ion migration.Specifically,adding 15 wt% of PPO can reduce 70% of the self-extinguishing time and 54% of total heat release for commercial electrolytes.Moreover,LiFePO_(4)/lithium and graphite/lithium cells as well as LiFePO_(4)/graphite pouch full cells exhibit good long-term cycling stability.

Computer vision-aided DEM study on the compaction characteristics of graded subgrade filler considering realistic coarse particle shapes

The compaction quality of subgrade filler strongly affects subgrade settlement.The main objective of this research is to analyze the macro-and micro-mechanical compaction characteristics of subgrade filler based on the real shape of coarse particles.First,an improved Viola-Jones algorithm is employed to establish a digitalized 2D particle database for coarse particle shape evaluation and discrete modeling purposes of subgrade filler.Shape indexes of 2D subgrade filler are then computed and statistically analyzed.Finally,numerical simulations are performed to quantitatively investigate the effects of the aspect ratio(AR)and interparticle friction coefficient(μ)on the macro-and micro-mechanical compaction characteristics of subgrade filler based on the discrete element method(DEM).The results show that with the increasing AR,the coarse particles are narrower,leading to the increasing movement of fine particles during compaction,which indicates that it is difficult for slender coarse particles to inhibit the migration of fine particles.Moreover,the average displacement of particles is strongly influenced by the AR,indicating that their occlusion under power relies on particle shapes.The dis-placement and velocity of fine particles are much greater than those of the coarse particles,which shows that compaction is primarily a migration of fine particles.Under the cyclic load,the interparticle friction coefficientμhas little effect on the internal structure of the sample;under the quasi-static loads,however,the increase inμwill lead to a significant increase in the porosity of the sample.This study could not only provide a novel approach to investigate the compaction mechanism but also establish a new theoretical basis for the evaluation of intelligent subgrade compaction.

Effect of brazing temperature on microstructure and tensile strength ofγ-TiAl joint vacuum brazed with micro-nano Ti−Cu−Ni−Nb−Al−Hf filler

A novel micro-nano Ti−10Cu−10Ni−8Al−8Nb−4Zr−1.5Hf filler was used to vacuum braze Ti−47Al−2Nb−2Cr−0.15B alloy at 1160−1220℃ for 30 min.The interfacial microstructure and formation mechanism of TiAl joints and the relationships among brazing temperature,interfacial microstructure and joint strength were emphatically investigated.Results show that the TiAl joints brazed at 1160 and 1180℃ possess three interfacial layers and mainly consist of α_(2)-Ti_(3)Al,τ_(3)-Al_(3)NiTi_(2) and Ti_(2)Ni,but the brazing seams are no longer layered and Ti_(2)Ni is completely replaced by the uniformly distributed τ_(3)-Al_(3)NiTi_(2) at 1200 and 1220℃ due to the destruction of α_(2)-Ti_(3)Al barrier layer.This transformation at 1200℃ obviously improves the tensile strength of the joint and obtains a maximum of 343 MPa.Notably,the outward diffusion of Al atoms from the dissolution of TiAl substrate dominates the microstructure evolution and tensile strength of the TiAl joint at different brazing temperatures.

Influence of filler characteristics on particle removal in fluid catalytic cracking slurry under an alternating electric field

The characteristics of the packing material under an alternating electric field are an important factor in the removal of FCCS particles.In this study,the electric field distribution of a separation unit consisting of packed spheres under an alternating electric field is simulated,and the movement mechanism of catalyst particles is analysed.An"effective contact point"model is derived to predict the adsorption of filler contact points on catalyst particles under the alternating electric field,and the model is validated by simulations and experiments.The numerical calculation and experimental results indicate that the electrical properties of the filler spheres,the filler angleθ,and the frequency f of the alternating electric field affect the adsorption of catalyst particles.As the frequency of the electric field increases,the particle removal efficiency of the high-conductivity filler(silicon carbide)increases and then settles,and the separation efficiency of the low-conductivity filler(glass,zirconia)is not sensitive to the change in electric field frequency.

Basic Characteristics of an Appropriate Waste Fillers for Solvent Free and Water-Borne Industrial Polymer Floors and Their Utilization

Recently the manufacture of epoxy coating and flooring materials begun to be under strong pressure to use more environmentally friendly raw materials in its composition.First tendency to reduce of solvents and diluents contained in the materials appeared at the end of 90´s.This situation was supported by the Council of Europe in 2004 to reduce VOC emissions to zero till 2020.Solvent materials were thus largely replaced by solvent free materials from which the volatile substances are not released into the air.But pressure continued to increase,and over the past decade began to take centre stage water-based epoxy.On the Czech market solvent based material is still occasionally used,but predominant are solvent free materials.There are no commonly used materials containing wastes as fillers in new water-borne and solvent-free epoxy materials.Characteristics identification of the waste material as a potential filler is a set of properties that determine the limits of secondary raw materials or waste as a filler.This paper describes the basic characteristics which must be selected to meet the requirements,to affect negatively the workability,sedimentation,properties and behavior of the final floor system.Some materials must comply with special requirements,such as resistance to chemicals,etc.Next part of paper talks about utilization of polymer floors and their mechanical properties.

Research on Alkaline Filler Flame-Retarded Asphalt Pavement

Used as flame returdant of tunnel asphalt pavement, organic bromides produce a large amount of poisons and smoke in construction and flame retardation stage. The alkaline filler was found to replace mineral filler, and the flame- retarded asphalt mixtures were produced. Experimental results show that these asphalt mixtures are smoke restrained ; the performances and construction technology of asphalt pavement are not influenced; also the alkaline filler is of low-price. So this kind of flame-retarded asphalt mixtures is suitable for tunnel patement.

3D flame-retardant skeleton reinforced polymer electrolyte for solid-state dendrite-free lithium metal batteries

For solid polymer electrolytes(SPEs),improving their mechanical and electrochemical properties is the key to obtaining batteries with higher safety and higher energy density.Herein,a novel synergistic strategy proposed is preparing a 3D flame-retardant skeleton(3DPA)and adding nano-multifunctional fillers(Li-ILs@ZIF-8).In addition to providing mechanical support for the polyethylene oxide(PEO)matrix,3DPA also has further contributed to the system’s flame retardancy and further improved the safety.Simultaneously,the electrochemical performance is fully guaranteed by rigid Li-ILs@ZIF-8,which provides fast migration channels forLi^(+),reduces the crystallinity of PEO and effectively inhibits lithium dendrites.The limiting oxygen index of the optimal sample(PL3Z/PA)is as high as 20.5%,and the ionic conductivity reaches 2.89×10^(-4) and 0.91×10^(-3) S cm^(-1) at 25 and 55°C,respectively.The assembled Li|PL3Z/PA|Li battery can be cycled stably for more than 1000 h at a current density of 0.1 m A cm^(-2) without short circuit being pierced by lithium dendrites.The specific capacity of the LFP|PL3Z/PA|Li battery was 160.5 m Ah g^(-1) under a current density of 0.5 C,and the capacity retention rate was 90.0%after 300 cycles.

Flame-retardant Mechanism of Magnesium Oxychloride in Epoxy Resin

Flame-retardant mechanism of magnesium oxychloride （M OC） in EP was in-vestigated by limiting oxygen index （LOI）, XRD, SEM, TG-DTG and DSC. The results show that MOC performed well as an inorganic flame-retardant in EP. When the content of MOC is 50%, the LOI of EP reaches 29.6% and mass of residual char reaches 9.6%. The flame retarde mechanism of MOC is due to the synergies of diluting, cooling, catalyzing char forming and obstructing effects.

Comparison of Flame-retardancy Property and Mechanism between a Phosphate Ester and a Phosphoramine Flame-retardants

A halogen-free flame-retardant (hydroquinone bis (N,N’-diarylphosphoramidate),4N-HDP) containing phosphorus-nitrogen was synthesized.Its structure was characterized by infrared spectroscopy (IR),nuclear magnetic resonance (^(1)H-NMR and^(31)P-NMR).Thermogravimetric analysis (TG),limiting oxygen index (LOI),UL-94 vertical burning test (UL-94),thermogravimetric-infrared instrument (TG-IR) and scanning electron microscopy (SEM) were used to compare the flame-retarding performance and mechanism of hydroquinone bis (diphenyl phosphate) (HDP) and 4N-HDP.TG,IR and TG-IR were used for comparative analysis,indicating that both HDP and 4N-HDP are flame-retardants,and the gas phase and condensed phase act synergistically.In the pyrolysis process,it is divided into two steps:the first step is the breakage of large molecules to small molecules;the second step is the gasification and carbonization of small molecules,and eventually produces phosphate ester and non-flammable gases.Through the comparison of various results,it could be found that 4N-HDP has better flame-retarding performance compared to HDP in the composite with polycarbonate (PC).

A new flame-retardant polymer electrolyte with enhanced Li-ion conductivity for safe lithium-sulfur batteries

Flame-retardant polymer electrolytes(FRSPEs)are attractive due to their potential for fundamentally settling the safety issues of liquid electrolytes.However,the current FRSPEs have introduced large quantity of flame-retardant composition which cannot conduct lithium ions,thus decreasing the Li-ion conductivity.Here,we synthesize a novel liquid monomer 2-((bis((2-oxo-1,3-dioxolan-4-yl)methoxy)phosphoryl)oxy)ethyl acrylate(BDPA)for preparing FRSPE by in-situ polymerization,in which PBDPA polymer can not only conduct lithium ions,but also prevent burning.The prepared FRSPE demonstrated outstanding flame-retardant property,favorable lithium-ion conductivity of 5.65×10^(-4) S cm^(-1) at ambient temperature,and a wide electrochemical window up to 4.5 V.Moreover,the Li/in-situ FRSPE/S@pPAN cell exhibited favorable electrochemical performances.We believe that this work provides an effective strategy for establishing high-performance fireproof quasi-solid-state battery system.

The Critical Role of Fillers in Composite Polymer Electrolytes for Lithium Battery

With excellent energy densities and highly safe performance,solidstate lithium batteries(SSLBs)have been hailed as promising energy storage devices.Solid-state electrolyte is the core component of SSLBs and plays an essential role in the safety and electrochemical performance of the cells.Composite polymer electrolytes(CPEs)are considered as one of the most promising candidates among all solid-state electrolytes due to their excellent comprehensive performance.In this review,we briefly introduce the components of CPEs,such as the polymer matrix and the species of fillers,as well as the integration of fillers in the polymers.In particular,we focus on the two major obstacles that affect the development of CPEs:the low ionic conductivity of the electrolyte and high interfacial impedance.We provide insight into the factors influencing ionic conductivity,in terms of macroscopic and microscopic aspects,including the aggregated structure of the polymer,ion migration rate and carrier concentration.In addition,we also discuss the electrode-electrolyte interface and summarize methods for improving this interface.It is expected that this review will provide feasible solutions for modifying CPEs through further understanding of the ion conduction mechanism in CPEs and for improving the compatibility of the electrode-electrolyte interface.

Structure and Properties of PLA Composite Enhanced with Biomass Fillers from Herbaceous Plants

PLA composites containing biomass fillers from the three herbaceous plants such as reed,wheat stalk,and coco-nut fiber with length and diameter at the scale of several millimeters were prepared without using additives.The reinforcement effect on the properties of PLA/biomass filler composites is investigated.The research results show that the PLA/biomass filler composites exhibit good stiffness,flexural strength,and impact toughness.Among the three kinds of biomass fillers,reed reinforced PLA composites show optimal mechanical properties.When filled with 40%–50%reed,the flexural moduli of the composites are over 7000 MPa.Flexural strength retains at the same level of pure PLA.The notch impact strength reaches to 4.50±0.73 kJ/m^(2),which is 2.06 times higher than that of pure PLA.Furthermore,the introduction of biomass fillers increases the crystallization ability of PLA and does not increase the water absorption of the composites.This research demonstrated that PLA composites prepared with biomass fillers from the herbaceous plants(namely herb plastic composites,HPCs)is a material with good comprehensive mechanical properties while retaining the intrinsic particularity of biological sources.

Property of Polyimide/Flame-Retardant Viscose Blended Fabrics

Although polyimide fibers are excellent intrinsic flame-retardant fibers, their price is so high that they are rarely used in clothing. To expand their application, the polyimide fibers were blended with flame-retardant viscose fibers at a ratio of 30∶70, and the blended yarns were woven with flame-retardant polyester filaments. Fabrics with different parameters, including fabric weaves, warp yarn densities, and fabric layers, were designed, and the effects of those fabric parameters on mechanical properties and flame-retardant properties were tested and analyzed. The results show that the tearing load of the fabrics is affected by fabric weaves, warp yarn densities, and fabric layers, and the tearing load of the weft mountain weave fabric and the twill weave fabric is higher than that of the plain weave fabric. The bursting load of the fabric increases with the increase of warp yarn densities and layers. Among the tested fabric samples, the triple-layer twill fabric has the best flame-retardant performance, which meets the standard of flame-retardant protective fabric Grade B1 level. The research of this paper would provide guidance for the development and production of polyimide blended fabrics.

SYNTHESES AND CHARACTERIZATION OF CYCLIC ORGANIC BORONATE ESTERS AS FLAME-RETARDANTS

Some organoboron compounds as flame-retardants for fiber materials were prepared.Flame-retarding properties of these compounds determined by the Oxygen-Index Method weregood.These new compounds were characterized by IR,~1H NMR spectrum and elementalanalysis.

In-depth analysis of the influence of bio-silica filler(Didymosphenia geminata frustules)on the properties of Mg matrix composites

A novel metal matrix composites(MMC)with Mg matrix reinforced with natural filler in the form of Didymosphenia geminata frustules(algae with distinctive siliceous shells)are presented in this work.Pulse plasma sintering(PPS)was used to manufacture Mg-based composites with 1,5 and 10 vol.%ceramic filler.As a reference,pure Mg was sintered.The results show that the addition of 1 vol.%Didymosphenia geminata frustules to the Mg matrix increases its corrosion resistance by supporting passivation reactions,and do not affect the morphology of L929 fibroblasts.Addition of 5 vol.%the filler does not cause cytotoxic effects,but it supports microgalvanic reactions leading to the greater corrosion rate.Higher content than 5 vol.%the filler causes significant microgalvanic corrosion,as well as increases cytotoxicity due to the greater micro-galvanic effect of the composites containing 10 and 15 vol.%diatoms.The results of contact angle measurements show the hydrophilic character of the investigated materials,with slightly increase in numerical values with addition of amount of ceramic reinforcement.The addition of Didymosphenia geminata frustules causes changes in a thermo-elastic properties such as mean apparent value of coefficient of thermal expansion(CTE)and thermal conductivity(λ).The addition of siliceous reinforcement resulted in a linear decrease of CTE and reduction in thermal conductivity over the entire temperature range.With the increasing addition of Didymosphenia geminata frustules,an increase in strength with a decrease in compressive strain is observed.In all composites an increase in microhardness was attained.The results clearly indicate that filler in the form of Didymosphenia geminata frustules may significantly change the most important properties of pure Mg,indicating its wide potential in the application of Mg-based composites with a special focus on biomedical use.

Phase field simulation of grain refinement in silver-based filler metal

Numerical simulation is one of the important auxiliary methods for studying materials-related problems. In this study, phase field simulation was employed to investigate the refinement behavior of BAg55CuZn-x B brazing alloys. Simulation and experimental studies were conducted for B contents ranging from 0 wt.% to 0.2 wt.%. The results demonstrated that the addition of 0.05 wt.% B in the brazing alloy leads to a significant refinement effect. As the B content increases, the grain size further reduces, and a refinement stagnation phenomenon occurs after exceeding 0.15 wt.%. The solidification process of brazing alloys with different B content was predicted by simulation, and the simulation results showed that with the increase of B content, the initial number of nucleation increased, and the radius of the dendrite tip decreased. The simulation results are in good agreement with the experimental findings, providing further evidence of the refining effect of the B element and the reliable predictive capability of the phase field model.

不同填料生物膜对海水养殖尾水的脱氮效能及微生物群落分析

为探究不同填料生物膜对海水养殖尾水氮污染物的处理能力,分别以无填料(C)、牡蛎壳(M)、珊瑚石(S)、弹性填料(T)和悬浮球填料(F)构建5组生物滤池,比较填料生物膜成熟时间、成膜情况及对不同氮污染物的24 h去除能力,同时利用高通量测序技术分析挂膜期间(20、40、60 d)填料生物膜上微生物群落的变化。结果表明:不同填料生物膜成熟时间需要46~50 d,珊瑚石所需时间最短(46 d);扫描电镜显示,弹性填料和悬浮球填料附着生物量最多,以杆状细菌为主;对氨氮、亚硝酸盐氮、硝酸盐氮的24 h去除率最高的填料分别是悬浮球填料(68.66%±6.27%)、珊瑚石(99.99%±0.00%)和悬浮球填料(6.73%±3.41%);高通量测序显示,随着挂膜时间延长,弹性填料生物膜上的细菌丰度显著增加,牡蛎壳和珊瑚石生物膜上的细菌多样性显著下降(P<0.05);在门分类水平上,变形菌门(Proteobacteria)、拟杆菌门(Bacteroidetes)是不同填料生物膜的主要优势菌群,硝化螺旋菌门(Nitrospirae)、硝化刺菌门(Nitrospinae)的相对丰度随挂膜时间延长不断升高;在属分类水平上,亚硝酸菌属(Nitrosomonas)、硝化螺菌属(Nitrospira)、硝化刺菌属(Nitrospina)和未分类_亚硝化单胞菌科(unclassified_Nitrosomonadaceae)是填料生物膜上具有硝化作用的优势菌属,这4种硝化菌属在挂膜60 d时的相对丰度总和从高到低依次为悬浮球填料(42.53%)>牡蛎壳(30.50%)、弹性填料(29.30%)>珊瑚石(11.74%),假单胞菌属(Pseudomonas)、青枯菌属(Ralstonia)、噬几丁质菌属(Chitinophaga)和草螺菌属(Herbaspirillum)等反硝化菌属在珊瑚石填料生物膜上的相对丰度高于其他填料。研究表明,珊瑚石、悬浮球填料能够实现脱氮菌属的高效富集,对海水养殖尾水具有良好的脱氮能力,是较为理想的生物填料。

不同助留体系对装饰原纸二氧化钛复合填料留着效果的影响

本研究分别分析了单元助留体系阳离子聚酰胺环氧氯丙烷树脂(PAE),双元助留体系PAE/阴离子聚丙烯酰胺(APAM)、PAE/膨润土(MMT)、PAE/阳离子聚丙烯酰胺(CPAM),三元助留体系PAE/CPAM/APAM、PAE/CPAM/MMT对装饰原纸TiO_(2)/滑石粉复合填料留着效果的影响。确定了各个体系的最佳添加量,并筛选出助留效果最好的助留体系。结果表明,当PAE添加量2.0%、CPAM添加量0.08%、MMT添加量0.6%时,组成的PAE/CPAM/MMT三元助留体系留着效果最佳,此时,浆料和填料留着率分别为89.5%和65.0%,纸张的不透明度、白度及匀度分别为98.5%、86.6%和91。