A numerical simulation analysis for reactions of chalcopyrite and pyriteparticles coupled with momentum, heat and mass transfer between the particle and gas in a flashsmelting furnace is presented. In the simulation, ...A numerical simulation analysis for reactions of chalcopyrite and pyriteparticles coupled with momentum, heat and mass transfer between the particle and gas in a flashsmelting furnace is presented. In the simulation, the equations governing the gas flow are solvednumerically by Eular method. The particle phase is introduced into the gas flow by theparti-cle-source-in-cell technique (PSIC). Predictions including the fluid flow field, temperaturefield, concentration field of gas phase and the tracks of particles have been obtained by thenumerical simulation. The visualized results show that the reaction of sulfide particles is almostcompleted in the upper zone of the shaft within 1.5 m far from the central jet distributor (CJD)type concentrate burner. The simulation results are in good agreement with data obtained from aseries of experiments and tests in the plant and the error is less than 2%.展开更多
The influence of three important operation parameters in Jinlong flashsmelting furnace, including the distributing blast speed, the oxygen enrichment rate of process airand the ratio of central oxygen to overall oxyge...The influence of three important operation parameters in Jinlong flashsmelting furnace, including the distributing blast speed, the oxygen enrichment rate of process airand the ratio of central oxygen to overall oxygen (O_c/O_o), has been investigated using a virtualsimulation system on copper flash smelting furnace. The core of this virtual simulation system is anumerical simulation of CFD (computational fluid dynamics), and this system incorporates couplingmomentum transport, heat transport, mass transport, reaction kinetics between gas and particles andchemical reactions between gas and gas. A set of numerical predicted data were obtained. The CFDsimulation shows that there is a sensitive zone of the distributing blast speed, and the dustcontent ascends when the speed exceeds 180 m centre dot s^(-1). Increasing the oxygen concentrationof processing air benefits the efficient production of the flash smelting furnace.展开更多
Fluid flow, heat transfer and combustion in Jinlong CJD concentrate burnerflash smelting furnace have been investigated by numerical modeling and flow visualization. Themodeling is based on the Eulerian approach for t...Fluid flow, heat transfer and combustion in Jinlong CJD concentrate burnerflash smelting furnace have been investigated by numerical modeling and flow visualization. Themodeling is based on the Eulerian approach for the gas flow equations and the Lagrangian approachfor the particles. Interaction between the gas phase and particle phase, such as frictional forces,heat and mass transfer, are included by the addition of sources and sinks. The modeling resultsincluding the fluid flow field, temperature field, concentration field of gas phase and thetrajectories of particles have been obtained. The predicted results are in good agreement with thedata obtained from a series of experiments and tests in the Jinlong Copper Smelter and thetemperature error is less than 20 K.展开更多
A mathematical model has been presented to study the combustion of a single copper concentrate particle with high moisture content. By using the presented model, the effect of particle moisture content on particle tem...A mathematical model has been presented to study the combustion of a single copper concentrate particle with high moisture content. By using the presented model, the effect of particle moisture content on particle temperature, sulfur oxidation, and combustion heat generation has been evaluated. The mineralogical composition of the commonly used concentrate at Khatoonabad flash smelting furnace has been used in this study. It was found that the particle moisture content is removed in the sub-second time range and thus the moisture has marginal impact on the variation of particle temperature and on the reaction rate when the gas temperature is assumed to be constant in the reaction shaft. When a concentrate with high moisture content is charged, the particle size enlargement due to the agglomeration of concentrate particles causes an abrupt fall in the particle reaction rate.展开更多
文摘A numerical simulation analysis for reactions of chalcopyrite and pyriteparticles coupled with momentum, heat and mass transfer between the particle and gas in a flashsmelting furnace is presented. In the simulation, the equations governing the gas flow are solvednumerically by Eular method. The particle phase is introduced into the gas flow by theparti-cle-source-in-cell technique (PSIC). Predictions including the fluid flow field, temperaturefield, concentration field of gas phase and the tracks of particles have been obtained by thenumerical simulation. The visualized results show that the reaction of sulfide particles is almostcompleted in the upper zone of the shaft within 1.5 m far from the central jet distributor (CJD)type concentrate burner. The simulation results are in good agreement with data obtained from aseries of experiments and tests in the plant and the error is less than 2%.
文摘The influence of three important operation parameters in Jinlong flashsmelting furnace, including the distributing blast speed, the oxygen enrichment rate of process airand the ratio of central oxygen to overall oxygen (O_c/O_o), has been investigated using a virtualsimulation system on copper flash smelting furnace. The core of this virtual simulation system is anumerical simulation of CFD (computational fluid dynamics), and this system incorporates couplingmomentum transport, heat transport, mass transport, reaction kinetics between gas and particles andchemical reactions between gas and gas. A set of numerical predicted data were obtained. The CFDsimulation shows that there is a sensitive zone of the distributing blast speed, and the dustcontent ascends when the speed exceeds 180 m centre dot s^(-1). Increasing the oxygen concentrationof processing air benefits the efficient production of the flash smelting furnace.
文摘Fluid flow, heat transfer and combustion in Jinlong CJD concentrate burnerflash smelting furnace have been investigated by numerical modeling and flow visualization. Themodeling is based on the Eulerian approach for the gas flow equations and the Lagrangian approachfor the particles. Interaction between the gas phase and particle phase, such as frictional forces,heat and mass transfer, are included by the addition of sources and sinks. The modeling resultsincluding the fluid flow field, temperature field, concentration field of gas phase and thetrajectories of particles have been obtained. The predicted results are in good agreement with thedata obtained from a series of experiments and tests in the Jinlong Copper Smelter and thetemperature error is less than 20 K.
文摘A mathematical model has been presented to study the combustion of a single copper concentrate particle with high moisture content. By using the presented model, the effect of particle moisture content on particle temperature, sulfur oxidation, and combustion heat generation has been evaluated. The mineralogical composition of the commonly used concentrate at Khatoonabad flash smelting furnace has been used in this study. It was found that the particle moisture content is removed in the sub-second time range and thus the moisture has marginal impact on the variation of particle temperature and on the reaction rate when the gas temperature is assumed to be constant in the reaction shaft. When a concentrate with high moisture content is charged, the particle size enlargement due to the agglomeration of concentrate particles causes an abrupt fall in the particle reaction rate.
