The flat fan nozzle with a single orifice formed by a rectangular cut at the nozzle exit through a semi-ellipsoid blind end was developed. The flow rate characteristic of the nozzle was analyzed. Theoretical analysis ...The flat fan nozzle with a single orifice formed by a rectangular cut at the nozzle exit through a semi-ellipsoid blind end was developed. The flow rate characteristic of the nozzle was analyzed. Theoretical analysis shows that the discharge coefficient of the nozzle is a function of the ratio of the projected exit flow area to the cross sectional area of the nozzle input section. Water spraying experiment results show that the discharge coefficient increases with the increase of the ratio of the projected exit flow area to the cross sectional area of the nozzle input section when the rectangular cut depth doesn't exceed the distance from the center of the hemisphere to the nozzle end; conversely,the discharge coefficient decreases with the increase of the ratio; for a given nozzle,the discharge coefficient varies with Reynolds number.展开更多
The suitability of high pressure nozzles in terms of impact upon targeted surfaces has indicated its effectiveness for the cleaning of oil production tubing scale, which has recently attracted wider industrial applica...The suitability of high pressure nozzles in terms of impact upon targeted surfaces has indicated its effectiveness for the cleaning of oil production tubing scale, which has recently attracted wider industrial applications considering its efficiency, ease of operation and cost benefit. In the oil and gas production, these nozzles are now used for cleaning the scale deposits along the production tubing resulted mainly from salt crystallization due to pressure and temperature drop. Detailed characterizations of flat-fan nozzle in terms of droplet sizes and mean velocities will benefit momentum computations for the axial and radial distribution along the spray width, with the view of finding the best stand-off distance between the target scale and the spray nozzle. While the droplet sizes and the velocities determine the momentum at impact, measuring droplet sizes has been known to be difficult especially in the high density spray region, still laboratory characterization of nozzles provides a reliable data especially avoiding uncontrollable parameters. While several researches consider break up insensitive to the cleaning performance, this research investigates the experimental data obtained using PDA （phase doppler anemometry） which led to established variation in momentum across the spray width thus, non-uniformity of impact distribution. Comparative model was then developed using Ansys Fluent code, which verifies the eroded surfaces of material using the flat-fan atomizer to have shown variability in the extent of impact actions due to kinetic energy difference between the center and edge droplets. The study＇s findings could be useful in establishing the effect of droplet kinetic energies based on the spray penetration, and will also add significant understanding to the effect of the ligaments and droplets, along the spray penetration in order to ascertain their momentum impact distribution along the targeted surface.展开更多
基金Science and Technology Program of Shanxi Province,China(No.20120321012)
文摘The flat fan nozzle with a single orifice formed by a rectangular cut at the nozzle exit through a semi-ellipsoid blind end was developed. The flow rate characteristic of the nozzle was analyzed. Theoretical analysis shows that the discharge coefficient of the nozzle is a function of the ratio of the projected exit flow area to the cross sectional area of the nozzle input section. Water spraying experiment results show that the discharge coefficient increases with the increase of the ratio of the projected exit flow area to the cross sectional area of the nozzle input section when the rectangular cut depth doesn't exceed the distance from the center of the hemisphere to the nozzle end; conversely,the discharge coefficient decreases with the increase of the ratio; for a given nozzle,the discharge coefficient varies with Reynolds number.
文摘The suitability of high pressure nozzles in terms of impact upon targeted surfaces has indicated its effectiveness for the cleaning of oil production tubing scale, which has recently attracted wider industrial applications considering its efficiency, ease of operation and cost benefit. In the oil and gas production, these nozzles are now used for cleaning the scale deposits along the production tubing resulted mainly from salt crystallization due to pressure and temperature drop. Detailed characterizations of flat-fan nozzle in terms of droplet sizes and mean velocities will benefit momentum computations for the axial and radial distribution along the spray width, with the view of finding the best stand-off distance between the target scale and the spray nozzle. While the droplet sizes and the velocities determine the momentum at impact, measuring droplet sizes has been known to be difficult especially in the high density spray region, still laboratory characterization of nozzles provides a reliable data especially avoiding uncontrollable parameters. While several researches consider break up insensitive to the cleaning performance, this research investigates the experimental data obtained using PDA （phase doppler anemometry） which led to established variation in momentum across the spray width thus, non-uniformity of impact distribution. Comparative model was then developed using Ansys Fluent code, which verifies the eroded surfaces of material using the flat-fan atomizer to have shown variability in the extent of impact actions due to kinetic energy difference between the center and edge droplets. The study＇s findings could be useful in establishing the effect of droplet kinetic energies based on the spray penetration, and will also add significant understanding to the effect of the ligaments and droplets, along the spray penetration in order to ascertain their momentum impact distribution along the targeted surface.
