Numerical simulation is applied to gas-particle flows of the primary and the secondary air ducts and burner region, and of two kinds of swirl burners. The modeling results of Radial Bias Combustion (RBC) burner well a...Numerical simulation is applied to gas-particle flows of the primary and the secondary air ducts and burner region, and of two kinds of swirl burners. The modeling results of Radial Bias Combustion (RBC) burner well agreed with the data from the three-dimensional Phase-Doppler anemometry (PDA) experiment by Li, et al. The modeling test conducted in a 1025 t/h boiler was to study the quality of aerodynamics for a Central Fuel Rich (CFR) burner, and the Internal Recirculation Zone (IRZ) was measured. In addition, gas-particle flows with a CFR burner were investigated by numerical simulation, whose results accorded with the test data fundamentally. By analyzing the distribution of gas velocity and trajectories of particles respectively, it is found that the primary air’s rigidity of CFR burner is stronger than that of RBC burner, and the primary air mixes with the secondary air later. Furthermore, high concentration region of pulverized coal exists in the burner’s central zone whose atmosphere is reduced, and trajectories of particles in IRZ of CFR burner are longer than that of RBC burner. They are favorable to coal’s ignition and the reduction of NOx emission.展开更多
Swirl burner design was optimized by simulating swirl gas\|particle flows with different swirl numbers at the exit of a small\|scale swirl burner for pulverized\|coal furnaces using the k\|ε\|k p model. The pred...Swirl burner design was optimized by simulating swirl gas\|particle flows with different swirl numbers at the exit of a small\|scale swirl burner for pulverized\|coal furnaces using the k\|ε\|k p model. The predicted two\|phase time\|averaged velocities and particle concentration distributions for several different cases were compared to improve the design. The effect of the swirl number on the two\|phase velocities and particle concentration was investigated. The results give the two\|phase axial and tangential time\|averaged and fluctuation velocities and particle concentrations, showing that large recirculation zones of gas and particles forms in the near\|axis region of the burner exit, but the particle concentration in the recirculating zone is very low.展开更多
Because the rotational current stabilizes the flame by creating a recirculation zone,it may increase the risk of reversal.For this reason,low-spin combustion is used to stabilize the flame while preventing flashbacks....Because the rotational current stabilizes the flame by creating a recirculation zone,it may increase the risk of reversal.For this reason,low-spin combustion is used to stabilize the flame while preventing flashbacks.Therefore,in this study,the combustion flow of methane gas in a low-swirl burner is simulated using a partially premixed combustion model.Furthermore,the fuel flow rate is considered constant.The research parameters include swirl angle(θ=35°–47°),equivalence ratio(φ=0.6–0.9)and inlet axial flow radius(R=0.6–0.7)and effect of these parameters on temperature distribution,flame length,flame rise length,velocity field,and streamlines of the number of pollutant species are investigated.The contours of streamline,temperature distribution,and velocity distribution are also presented for analysis of flow physics.The results show that with increasing the fuel-air ratio,the strength of the axial flow decreases,and the position of the maximum flame temperature shifts toward the inlet of the reactants.The results also reveal that by increasing the swirl angle of the flow,the position of the minimum velocity value(opposite to the direction of the axis)tends towards the outlet.The results also indicate that the maximum temperature of the combustion chamber increases with increasing the swirl angle,and inθ=35°,the maximum temperature is 1711℃and inθ=41°,this value is 1812℃.Finally,by increasing the swirl angle toθ=47°,the maximum flame temperature position is found at a considerable distance from the inlet and is 1842℃.展开更多
基金Sponsored by the Ministry of Education of China via the 2004 Year New Century Excellent Talents in University (Grant No NCET-04-0328)Hei-longjiang Province via 2005 Year Key Projects (Grant No GC05A314)
文摘Numerical simulation is applied to gas-particle flows of the primary and the secondary air ducts and burner region, and of two kinds of swirl burners. The modeling results of Radial Bias Combustion (RBC) burner well agreed with the data from the three-dimensional Phase-Doppler anemometry (PDA) experiment by Li, et al. The modeling test conducted in a 1025 t/h boiler was to study the quality of aerodynamics for a Central Fuel Rich (CFR) burner, and the Internal Recirculation Zone (IRZ) was measured. In addition, gas-particle flows with a CFR burner were investigated by numerical simulation, whose results accorded with the test data fundamentally. By analyzing the distribution of gas velocity and trajectories of particles respectively, it is found that the primary air’s rigidity of CFR burner is stronger than that of RBC burner, and the primary air mixes with the secondary air later. Furthermore, high concentration region of pulverized coal exists in the burner’s central zone whose atmosphere is reduced, and trajectories of particles in IRZ of CFR burner are longer than that of RBC burner. They are favorable to coal’s ignition and the reduction of NOx emission.
文摘Swirl burner design was optimized by simulating swirl gas\|particle flows with different swirl numbers at the exit of a small\|scale swirl burner for pulverized\|coal furnaces using the k\|ε\|k p model. The predicted two\|phase time\|averaged velocities and particle concentration distributions for several different cases were compared to improve the design. The effect of the swirl number on the two\|phase velocities and particle concentration was investigated. The results give the two\|phase axial and tangential time\|averaged and fluctuation velocities and particle concentrations, showing that large recirculation zones of gas and particles forms in the near\|axis region of the burner exit, but the particle concentration in the recirculating zone is very low.
文摘Because the rotational current stabilizes the flame by creating a recirculation zone,it may increase the risk of reversal.For this reason,low-spin combustion is used to stabilize the flame while preventing flashbacks.Therefore,in this study,the combustion flow of methane gas in a low-swirl burner is simulated using a partially premixed combustion model.Furthermore,the fuel flow rate is considered constant.The research parameters include swirl angle(θ=35°–47°),equivalence ratio(φ=0.6–0.9)and inlet axial flow radius(R=0.6–0.7)and effect of these parameters on temperature distribution,flame length,flame rise length,velocity field,and streamlines of the number of pollutant species are investigated.The contours of streamline,temperature distribution,and velocity distribution are also presented for analysis of flow physics.The results show that with increasing the fuel-air ratio,the strength of the axial flow decreases,and the position of the maximum flame temperature shifts toward the inlet of the reactants.The results also reveal that by increasing the swirl angle of the flow,the position of the minimum velocity value(opposite to the direction of the axis)tends towards the outlet.The results also indicate that the maximum temperature of the combustion chamber increases with increasing the swirl angle,and inθ=35°,the maximum temperature is 1711℃and inθ=41°,this value is 1812℃.Finally,by increasing the swirl angle toθ=47°,the maximum flame temperature position is found at a considerable distance from the inlet and is 1842℃.
