Several sets of S4 direction-wave-current-tide meters have been deployed on the coral-reef flat of Yongshu Reef in the sea area of Nansha Islands.Based on the observational sea wave data, the attenuation characterist...Several sets of S4 direction-wave-current-tide meters have been deployed on the coral-reef flat of Yongshu Reef in the sea area of Nansha Islands.Based on the observational sea wave data, the attenuation characteristics of the waves propagating on the coral reef flat, the bottom friction coefficients and the transfer of wave energy are discussed in the paper. The results show that, in the relative depths of 0.0613~0.0867, the wave height attenuation per unit distance of wave propagation is 22.09%~46.56%, with an average of 31.35%; the wave energy attenuation coefficient, 33.74%~53.22%, with an average of 43.61%. The average of the bottom friction coefficients on the coral-reef flat is 0.1346, which is about 10 times that on the sand or silt bottom. In the course of propagation on the reef flat, the waves sustain more loss in high frequency than in low frequency and the spectral energy transfers to the low frequency. These results may be used for reference in island and reef engineering.展开更多
This paper presents an experimental study on a flat plate closed loop pulsating heat pipes. It consisted of total 40 channels with square cross section(2×2 mm2, 165 mm long) machined directly on an aluminum plate...This paper presents an experimental study on a flat plate closed loop pulsating heat pipes. It consisted of total 40 channels with square cross section(2×2 mm2, 165 mm long) machined directly on an aluminum plate(180×120×3 mm3), which was covered by a transparent plate. The working fluid employed was ethanol. As the results, the influence parameters of thermal performance were investigated, such as filling ratio, heat load and operational orientations etc. Filling ratio was found to be a critical parameter, and its effect was rather complicated. According to its values the PHP plate could have four distinct working zones with different operational characteristics and heat transfer performance. The effect of heat load on thermal performance was found to be positive, and in general, increasing the heat load would improve heat transfer performance. In order to analyze the effect of gravity on thermal performance, three different heat modes and total seven tilt angles were tested and compared. Successful operation at all orientations with respect to gravity was also achieved.展开更多
文摘Several sets of S4 direction-wave-current-tide meters have been deployed on the coral-reef flat of Yongshu Reef in the sea area of Nansha Islands.Based on the observational sea wave data, the attenuation characteristics of the waves propagating on the coral reef flat, the bottom friction coefficients and the transfer of wave energy are discussed in the paper. The results show that, in the relative depths of 0.0613~0.0867, the wave height attenuation per unit distance of wave propagation is 22.09%~46.56%, with an average of 31.35%; the wave energy attenuation coefficient, 33.74%~53.22%, with an average of 43.61%. The average of the bottom friction coefficients on the coral-reef flat is 0.1346, which is about 10 times that on the sand or silt bottom. In the course of propagation on the reef flat, the waves sustain more loss in high frequency than in low frequency and the spectral energy transfers to the low frequency. These results may be used for reference in island and reef engineering.
基金Supported by the Ger man National Science Foundation (DFG)(No. GR412/33)
文摘This paper presents an experimental study on a flat plate closed loop pulsating heat pipes. It consisted of total 40 channels with square cross section(2×2 mm2, 165 mm long) machined directly on an aluminum plate(180×120×3 mm3), which was covered by a transparent plate. The working fluid employed was ethanol. As the results, the influence parameters of thermal performance were investigated, such as filling ratio, heat load and operational orientations etc. Filling ratio was found to be a critical parameter, and its effect was rather complicated. According to its values the PHP plate could have four distinct working zones with different operational characteristics and heat transfer performance. The effect of heat load on thermal performance was found to be positive, and in general, increasing the heat load would improve heat transfer performance. In order to analyze the effect of gravity on thermal performance, three different heat modes and total seven tilt angles were tested and compared. Successful operation at all orientations with respect to gravity was also achieved.