The presence of horizontal layered rocks in tunnel engineering significantly impacts the stability and strength of the surrounding rock mass,leading to floor heave in the tunnel.This study focused on preparing layered...The presence of horizontal layered rocks in tunnel engineering significantly impacts the stability and strength of the surrounding rock mass,leading to floor heave in the tunnel.This study focused on preparing layered specimens of rock-like material with varying thickness to investigate the failure behaviors of tunnel floors.The results indicate that thin-layered rock mass exhibits weak interlayer bonding,causing rock layers near the surface to buckle and break upwards when subjected to horizontal squeezing.With an increase in the layer thickness,a transition in failure mode occurs from upward buckling to shear failure along the plane,leading to a noticeable reduction in floor heave deformation.The primary cause of significant deformation in floor heave is upward buckling failure.To address this issue,the study proposes the installation of a partition wall in the middle of the floor to mitigate heave deformation of the rock layers.The results demonstrate that the partition wall has a considerable stabilizing effect on the floor,reducing the zone of buckling failure and minimizing floor heave deformation.It is crucial for the partition wall to be sufficiently high to prevent buckling failure and ensure stability.Through simulation calculations on an engineering example,it is confirmed that implementing a partition wall can effectively reduce floor heave and enhance the stability of tunnel floor.展开更多
BACKGROUND Pelvic floor dysfunction(PFD)is related to muscle fiber tearing during childbirth,negatively impacting postpartum quality of life of parturient.Appropriate and effective intervention is necessary to promote...BACKGROUND Pelvic floor dysfunction(PFD)is related to muscle fiber tearing during childbirth,negatively impacting postpartum quality of life of parturient.Appropriate and effective intervention is necessary to promote PFD recovery.AIM To analyze the use of hydrogen peroxide and silver ion disinfection for vaginal electrodes in conjunction with comprehensive rehabilitation therapy for postpartum women with PFD.METHODS A total of 59 women with PFD who were admitted to the hospital from May 2019 to July 2022 were divided into two groups:Control group(n=27)received comprehensive rehabilitation therapy and observation group(n=32)received intervention with pelvic floor biostimulation feedback instrument in addition to comprehensive rehabilitation therapy.The vaginal electrodes were disinfected with hydrogen peroxide and silver ion before treatment.Intervention for both groups was started 6 weeks postpartum,and rehabilitation lasted for 3 months.Pelvic floor muscle voltage,pelvic floor muscle strength,vaginal muscle voltage,vaginal muscle tone,pelvic floor function,quality of life,and incidence of postpartum PFD were compared between the two groups.RESULTS Before comprehensive rehabilitation treatment,basic data and pelvic floor function were not significantly different between the two groups.After treatment,the observation group showed significant improvements in the maximum voltage and average voltage of pelvic floor muscles,contraction time of type I and type II fibers,pelvic floor muscle strength,vaginal muscle tone,vaginal muscle voltage,and quality of life(GQOLI-74 reports),compared with the control group.The observation group had lower scores on the pelvic floor distress inventory(PFDI-20)and a lower incidence of postpartum PFD,indicating the effectiveness of the pelvic floor biostimulation feedback instrument in promoting the recovery of maternal pelvic floor function.CONCLUSION The combination of the pelvic floor biostimulation feedback instrument and comprehensive rehabilitation nursing can improve pelvic floor muscle strength,promote the recovery of vaginal muscle tone,and improve pelvic floor function and quality of life.The use of hydrogen peroxide and silver ion disinfectant demonstrated favorable antibacterial efficacy and is worthy of clinical application.展开更多
BACKGROUND Spastic pelvic floor syndrome(SPFS)is a refractory pelvic floor disease characterized by abnormal(uncoordinated)contractions of the external anal sphincter and puborectalis muscle during defecation,resultin...BACKGROUND Spastic pelvic floor syndrome(SPFS)is a refractory pelvic floor disease characterized by abnormal(uncoordinated)contractions of the external anal sphincter and puborectalis muscle during defecation,resulting in rectal emptation and obstructive constipation.The clinical manifestations of SPFS are mainly characterized by difficult defecation,often accompanied by a sense of anal blockage and drooping.Manual defecation is usually needed during defecation.From physical examination,it is commonly observed that the patient's anal muscle tension is high,and it is difficult or even impossible to enter with his fingers.AIM To investigate the characteristics of anorectal pressure and botulinum toxin A injection combined with biofeedback in treating pelvic floor muscle spasm syndrome.METHODS Retrospective analysis of 50 patients diagnosed with pelvic floor spasm syndrome.All patients underwent pelvic floor surface electromyography assessment,anorectal dynamics examination,botulinum toxin type A injection 100 U intramuscular injection,and two cycles of biofeedback therapy.RESULTS After the botulinum toxin A injection combined with two cycles of biofeedback therapy,the patient's postoperative resting and systolic blood pressure were significantly lower than before surgery(P<0.05).Moreover,the electromyography index of the patients in the resting stage and post-resting stages was significantly lower than before surgery(P<0.05).CONCLUSION Botulinum toxin A injection combined with biofeedback can significantly reduce pelvic floor muscle tension in treating pelvic floor muscle spasm syndrome.Anorectal manometry is an effective method to evaluate the efficacy of treatment objectively.However,randomized controlled trials are needed.展开更多
Recently the manufacture of epoxy coating and flooring materials begun to be under strong pressure to use more environmentally friendly raw materials in its composition.First tendency to reduce of solvents and diluent...Recently the manufacture of epoxy coating and flooring materials begun to be under strong pressure to use more environmentally friendly raw materials in its composition.First tendency to reduce of solvents and diluents contained in the materials appeared at the end of 90´s.This situation was supported by the Council of Europe in 2004 to reduce VOC emissions to zero till 2020.Solvent materials were thus largely replaced by solvent free materials from which the volatile substances are not released into the air.But pressure continued to increase,and over the past decade began to take centre stage water-based epoxy.On the Czech market solvent based material is still occasionally used,but predominant are solvent free materials.There are no commonly used materials containing wastes as fillers in new water-borne and solvent-free epoxy materials.Characteristics identification of the waste material as a potential filler is a set of properties that determine the limits of secondary raw materials or waste as a filler.This paper describes the basic characteristics which must be selected to meet the requirements,to affect negatively the workability,sedimentation,properties and behavior of the final floor system.Some materials must comply with special requirements,such as resistance to chemicals,etc.Next part of paper talks about utilization of polymer floors and their mechanical properties.展开更多
Machining is as old as humanity, and changes in temperature in both the machine’s internal and external environments can be of great concern as they affect the machine’s thermal stability and, thus, the machine’s d...Machining is as old as humanity, and changes in temperature in both the machine’s internal and external environments can be of great concern as they affect the machine’s thermal stability and, thus, the machine’s dimensional accuracy. This paper is a continuation of our earlier work, which aimed to analyze the effect of the internal temperature of a machine tool as the machine is put into operation and vary the external temperature, the machine floor temperature. Some experiments are carried out under controlled conditions to study how machine tool components get heated up and how this heating up affects the machine’s accuracy due to thermally induced deviations. Additionally, another angle is added by varying the machine floor temperature. The parameters mentioned above are explored in line with the overall thermal stability of the machine tool and its dimensional accuracy. A Robodrill CNC machine tool is used. The CNC was first soaked with thermal energy by gradually raising the machine floor temperature to a certain level before putting the machine in operation. The machine was monitored, and analytical methods were deplored to evaluate thermal stability. Secondly, the machine was run idle for some time under raised floor temperature before it was put into operation. Data was also collected and analyzed. It is observed that machine thermal stability can be achieved in several ways depending on how the above parameters are joggled. This paper, in conclusion, reinforces the idea of machine tool warm-up process in conjunction with a carefully analyzed and established machine floor temperature variation for the approximation of the machine tool’s thermally stability to map the long-time behavior of the machine tool.展开更多
Temperature distribution over the absorber plate of a parallel flow flat-plate solar collector is numerically analyzed. The governing differential equations with boundary conditions are solved numerically using fluent...Temperature distribution over the absorber plate of a parallel flow flat-plate solar collector is numerically analyzed. The governing differential equations with boundary conditions are solved numerically using fluent software. Effects of the inlet mass flux, inlet temperature and tube spacing on velocity and temperature distributions are discussed. Numerical results show that the distributions of velocity and temperature of fluid is unsymmetrical inside pipe.展开更多
Maxillary sinus floor augmentation using lateral window and crestal technique is considered as predictable methods to increase the residual bone height;however,this surgery is commonly complicated by Schneiderian memb...Maxillary sinus floor augmentation using lateral window and crestal technique is considered as predictable methods to increase the residual bone height;however,this surgery is commonly complicated by Schneiderian membrane perforation,which is closely related to anatomical factors.This article aimed to assess anatomical factors on successful augmentation procedures.After review of the current evidence on sinus augmentation techniques,anatomical factors related to the stretching potential of Schneiderian membrane were assessed and a decision tree for the rational choice of surgical approaches was proposed.Schneiderian membrane perforation might occur when local tension exceeds its stretching potential,which is closely related to anatomical variations of the maxillary sinus.Choice of a surgical approach and clinical outcomes are influenced by the stretching potential of Schneiderian membrane.In addition to the residual bone height,clinicians should also consider the stretching potential affected by the membrane health condition,the contours of the maxillary sinus,and the presence of antral septa when evaluating the choice of surgical approaches and clinical outcomes.展开更多
This study aimed to introduce a minimally invasive technique for maxillary sinus floor elevation using the lateral approach(lSFE)and to determine the factors that influence the stability of the grafted area in the sin...This study aimed to introduce a minimally invasive technique for maxillary sinus floor elevation using the lateral approach(lSFE)and to determine the factors that influence the stability of the grafted area in the sinus cavity.Thirty patients(30 implants)treated with lSFE using minimally invasive techniques from 2015 to 2019 were included in the study.Five aspects of the implant(central,mesial,distal,buccal,and palatal bone heights[BHs])were measured using cone-beam computed tomography(CBCT)before implant surgery,immediately after surgery(T0),6 months after surgery(T1),and at the last follow-up visit(T2).Patients’characteristics were collected.A small bone window(height,(4.40±0.74)mm;length,(6.26±1.03)mm)was prepared.No implant failed during the follow-up period(3.67±1.75)years.Three of the 30 implants exhibited perforations.Changes in BH of the five aspects of implants showed strong correlations with each other and BH decreased dramatically before second-stage surgery.Residual bone height(RBH)did not significantly influence BH changes,whereas smoking status and type of bone graft materials were the potentially influential factors.During the approximate three-year observation period,lSFE with a minimally invasive technique demonstrated high implant survival rate and limited bone reduction in grafted area.In conclusion,lSFE using minimally invasive techniques was a viable treatment option.Patients who were nonsmokers and whose sinus cavity was filled with deproteinized bovine bone mineral(DBBM)had significantly limited bone resorption in grafted area.展开更多
The test floor effects seen in standardised tests lead to a standardised score of 1 or less with a flat profile that hides a child’s individual strengths and needs. The Griffiths III community of practitioners reques...The test floor effects seen in standardised tests lead to a standardised score of 1 or less with a flat profile that hides a child’s individual strengths and needs. The Griffiths III community of practitioners requested advice on the reporting of children’s development below the floor of the test, so that individual strengths and needs can be described. This paper reports the third phase of research following an earlier Scoping Review and a wider literature review. To confirm quality control, Phase 3 was conducted in a retrospective manner using the same methodology as the earlier phases but in a reverse direction. Peer reviewer comments and key elements from the Scoping Review and keywords from the publications were tabulated. Data analysis included a change of perspective to that of the child and their individual rights with respect to the literature themes already described in Phase 2. These confirmed that there is little specific guidance in the literature, but that computational advances for homogeneous populations and especially disaggregated data offer some solutions. A greater balance between broad biopsychosocial models and standardised models of assessment should be sought by practitioners together with the use of disaggregated data to highlight issues that pertain to individual subsets of results. This will ensure that the child’s right for their individual strengths and needs to be described together with a plan for management, may be met.展开更多
In order to better meet the objective requirements of the use safety of the high-rise glulam building floor structure and the living comfort of the residents,the transient excitation,environmental excitation and frequ...In order to better meet the objective requirements of the use safety of the high-rise glulam building floor structure and the living comfort of the residents,the transient excitation,environmental excitation and frequency spectrum identification methods were used to carry out experimental modal test in-site on the three rooms numbered A,B and C of the same glulam structural building.The three rooms have different functions,different floor sizes and different floor supporting structures.The research results have shown that the first-order bending frequency of the floor structure of Room A is 27.50 Hz,the transverse second-order bending frequency is 34.75 Hz,the longitudinal second-order bending frequency is 53.25 Hz,and the first-order torsional frequency is 56.25 Hz.The reinforced wooden beam at the bottom of the floor of Room A increases the transverse stiffness of the floor structure,but does not offset the anisotropy caused by the longitudinally installed glulam floors.The fundamental frequency values of the floor structures of the three rooms numbered A,B,and C are 27.5,13 and 18 Hz,respectively.This has a relatively high innovation and reference significance for integrating the theory of structural dynamic characteristics with the dynamic testing technology,improving the design level of high-rise glulam structure buildings,and improving the living comfort of residents.展开更多
Objective: To investigate the effects of different delivery modes on perinatal pelvic floor muscle strength, PG, ACTH and CRP of high-risk pregnant women. Methods: 380 high-risk pregnant women who gave birth in our ho...Objective: To investigate the effects of different delivery modes on perinatal pelvic floor muscle strength, PG, ACTH and CRP of high-risk pregnant women. Methods: 380 high-risk pregnant women who gave birth in our hospital from March 2021 to February 2022 were selected as subjects, including 100 vaginal natural delivery, 156 forceps assisted delivery and 124 cesarean section. Pelvic floor pressure, PG, ACTH, CRP, IL-6, TNF-α and IL-4, IL-10 levels were evaluated and compared. The perinatal occurrence of pelvic floor functional disease (PFD) in high-risk pregnant women in each group was analyzed and evaluated. Results: There were statistical differences in the amount of postpartum blood loss (P 0.0001, F = 99.01), postpartum blood loss 24 h (P = 0.0004, F = 19.54) and hospital stay (P 0.0001, F = 70.81) among the three groups of high-risk women in natural vaginal delivery, forceps delivery and cesarean section. In addition, there were 72, 134 and 70 cases of abnormal pelvic floor fatigue in natural vaginal delivery, forceps assisted delivery and cesarean section (P 0.0001, χ<sup>2</sup> = 30.16). There were 36, 79 and 21 cases of muscle injury, respectively (P 0.0001, χ<sup>2</sup> = 34.16). There were 49, 98 and 43 cases of dysmuscular contraction, respectively (P 0.0001, χ<sup>2</sup> = 21.94). There were 65, 120 and 41 cases with vaginal dynamic pressure 80 cm H<sub>2</sub>O (P 0.0001, χ<sup>2</sup> = 56.86), respectively. The.展开更多
Dermoid cyst of the oral floor is rare benign tumour, who having three histological aspects: dermoid, teratoid and epidermoid. This one is characterized by the presence of a squamous stratified epithelium with cutaneo...Dermoid cyst of the oral floor is rare benign tumour, who having three histological aspects: dermoid, teratoid and epidermoid. This one is characterized by the presence of a squamous stratified epithelium with cutaneous remnants. It may occur in any part of the body, however their frequency in the ENT sphere is relatively scarce. Seven per cent (7%) only of epidermoid cysts occur in the cervico-facial area, 1.6% of which locate at the floor level. When they are located submandibular, they can pose diagnostic difficulties and look like a tumour of the submaxillary gland. We report two cases of epidermoid cyst of the floor. Both patients suffered from swelling of the submandibular gland. Magnetic Resonance Imaging was not requested due to lack of resources. However, surgery allowed in both cases the excision of a cyst next to a normal submandibular gland. Patients did well post operatively.展开更多
目的:探索术前盆底肌电生理参数对前列腺癌术后尿失禁风险的预测价值。方法:选择2020年1月至2022年10月在北京大学第一医院泌尿外科行根治性前列腺切除术患者的病例资料进行回顾性分析,记录患者的年龄、体重指数(body mass index,BMI)...目的:探索术前盆底肌电生理参数对前列腺癌术后尿失禁风险的预测价值。方法:选择2020年1月至2022年10月在北京大学第一医院泌尿外科行根治性前列腺切除术患者的病例资料进行回顾性分析,记录患者的年龄、体重指数(body mass index,BMI)、国际前列腺症状评分(international prostate symptom score,IPSS)、前列腺特异性抗原(prostate-specific antigen,PSA)水平、Gleason评分、手术方式、是否尿道功能重建、是否淋巴结清扫、性神经是否保留、留置导尿时间、D’Amico风险分级、美国麻醉医师协会(American Society of Anesthesiologists,ASA)评分、查尔森(Charlson)合并症指数、术后随访时间、前列腺体积,以及盆底肌电生理参数(前静息均值、快肌均值和慢肌均值)。通过多因素Logistic回归分析,筛选出影响术后早期尿失禁发生的独立危险因素,并通过计算受试者工作特征曲线(receiver operating characteristic,ROC)下面积,评估盆底肌电参数的预测效能,再利用约登指数(Youden index)并结合临床意义,共同确定术后早期尿失禁发生的最佳临界值。结果:纳入患者271例,术后自主控尿率为81.9%。患者快肌评分为23.5(18.2,31.6)分,慢肌评分为12.5(9.6,17.3)分,179例(66.1%)患者未保留性神经,110例(40.6%)患者进行了尿道功能重建。高龄和盆底快肌评分低被确认为尿失禁发生的独立危险因素。≤60岁患者是≥70岁患者自主控尿率的5.482倍(95%CI:1.532~19.617,P<0.05);患者的盆底快肌评分与尿失禁恢复的关系密切(OR=1.209,95%CI:1.132~1.291,P<0.05)。当术前盆底快肌评分的最佳临界值设定为18.5分时,ROC的敏感度和特异度分别为80.6%和61.2%。结论:术前盆底肌电生理参数对于前列腺癌术后尿失禁风险表现出较好的预测准确性和临床应用性,能够用于前列腺癌术后尿失禁风险的早期识别,其中年龄和盆底快肌评分是重要的预测因子。展开更多
基金supported by the Key Program of National Natural Science Foundation of China(No.U23A202579)the National Natural Science Foundation of China(No.42277187,42007276,41972297)the Natural Science Foundation of Hebei Province(No.D2021202002)。
文摘The presence of horizontal layered rocks in tunnel engineering significantly impacts the stability and strength of the surrounding rock mass,leading to floor heave in the tunnel.This study focused on preparing layered specimens of rock-like material with varying thickness to investigate the failure behaviors of tunnel floors.The results indicate that thin-layered rock mass exhibits weak interlayer bonding,causing rock layers near the surface to buckle and break upwards when subjected to horizontal squeezing.With an increase in the layer thickness,a transition in failure mode occurs from upward buckling to shear failure along the plane,leading to a noticeable reduction in floor heave deformation.The primary cause of significant deformation in floor heave is upward buckling failure.To address this issue,the study proposes the installation of a partition wall in the middle of the floor to mitigate heave deformation of the rock layers.The results demonstrate that the partition wall has a considerable stabilizing effect on the floor,reducing the zone of buckling failure and minimizing floor heave deformation.It is crucial for the partition wall to be sufficiently high to prevent buckling failure and ensure stability.Through simulation calculations on an engineering example,it is confirmed that implementing a partition wall can effectively reduce floor heave and enhance the stability of tunnel floor.
文摘BACKGROUND Pelvic floor dysfunction(PFD)is related to muscle fiber tearing during childbirth,negatively impacting postpartum quality of life of parturient.Appropriate and effective intervention is necessary to promote PFD recovery.AIM To analyze the use of hydrogen peroxide and silver ion disinfection for vaginal electrodes in conjunction with comprehensive rehabilitation therapy for postpartum women with PFD.METHODS A total of 59 women with PFD who were admitted to the hospital from May 2019 to July 2022 were divided into two groups:Control group(n=27)received comprehensive rehabilitation therapy and observation group(n=32)received intervention with pelvic floor biostimulation feedback instrument in addition to comprehensive rehabilitation therapy.The vaginal electrodes were disinfected with hydrogen peroxide and silver ion before treatment.Intervention for both groups was started 6 weeks postpartum,and rehabilitation lasted for 3 months.Pelvic floor muscle voltage,pelvic floor muscle strength,vaginal muscle voltage,vaginal muscle tone,pelvic floor function,quality of life,and incidence of postpartum PFD were compared between the two groups.RESULTS Before comprehensive rehabilitation treatment,basic data and pelvic floor function were not significantly different between the two groups.After treatment,the observation group showed significant improvements in the maximum voltage and average voltage of pelvic floor muscles,contraction time of type I and type II fibers,pelvic floor muscle strength,vaginal muscle tone,vaginal muscle voltage,and quality of life(GQOLI-74 reports),compared with the control group.The observation group had lower scores on the pelvic floor distress inventory(PFDI-20)and a lower incidence of postpartum PFD,indicating the effectiveness of the pelvic floor biostimulation feedback instrument in promoting the recovery of maternal pelvic floor function.CONCLUSION The combination of the pelvic floor biostimulation feedback instrument and comprehensive rehabilitation nursing can improve pelvic floor muscle strength,promote the recovery of vaginal muscle tone,and improve pelvic floor function and quality of life.The use of hydrogen peroxide and silver ion disinfectant demonstrated favorable antibacterial efficacy and is worthy of clinical application.
文摘BACKGROUND Spastic pelvic floor syndrome(SPFS)is a refractory pelvic floor disease characterized by abnormal(uncoordinated)contractions of the external anal sphincter and puborectalis muscle during defecation,resulting in rectal emptation and obstructive constipation.The clinical manifestations of SPFS are mainly characterized by difficult defecation,often accompanied by a sense of anal blockage and drooping.Manual defecation is usually needed during defecation.From physical examination,it is commonly observed that the patient's anal muscle tension is high,and it is difficult or even impossible to enter with his fingers.AIM To investigate the characteristics of anorectal pressure and botulinum toxin A injection combined with biofeedback in treating pelvic floor muscle spasm syndrome.METHODS Retrospective analysis of 50 patients diagnosed with pelvic floor spasm syndrome.All patients underwent pelvic floor surface electromyography assessment,anorectal dynamics examination,botulinum toxin type A injection 100 U intramuscular injection,and two cycles of biofeedback therapy.RESULTS After the botulinum toxin A injection combined with two cycles of biofeedback therapy,the patient's postoperative resting and systolic blood pressure were significantly lower than before surgery(P<0.05).Moreover,the electromyography index of the patients in the resting stage and post-resting stages was significantly lower than before surgery(P<0.05).CONCLUSION Botulinum toxin A injection combined with biofeedback can significantly reduce pelvic floor muscle tension in treating pelvic floor muscle spasm syndrome.Anorectal manometry is an effective method to evaluate the efficacy of treatment objectively.However,randomized controlled trials are needed.
基金supported by the project"OKTAEDR-partnership and building network."Project registration number is cz.1.07./2.4.00/31.0012.
文摘Recently the manufacture of epoxy coating and flooring materials begun to be under strong pressure to use more environmentally friendly raw materials in its composition.First tendency to reduce of solvents and diluents contained in the materials appeared at the end of 90´s.This situation was supported by the Council of Europe in 2004 to reduce VOC emissions to zero till 2020.Solvent materials were thus largely replaced by solvent free materials from which the volatile substances are not released into the air.But pressure continued to increase,and over the past decade began to take centre stage water-based epoxy.On the Czech market solvent based material is still occasionally used,but predominant are solvent free materials.There are no commonly used materials containing wastes as fillers in new water-borne and solvent-free epoxy materials.Characteristics identification of the waste material as a potential filler is a set of properties that determine the limits of secondary raw materials or waste as a filler.This paper describes the basic characteristics which must be selected to meet the requirements,to affect negatively the workability,sedimentation,properties and behavior of the final floor system.Some materials must comply with special requirements,such as resistance to chemicals,etc.Next part of paper talks about utilization of polymer floors and their mechanical properties.
文摘Machining is as old as humanity, and changes in temperature in both the machine’s internal and external environments can be of great concern as they affect the machine’s thermal stability and, thus, the machine’s dimensional accuracy. This paper is a continuation of our earlier work, which aimed to analyze the effect of the internal temperature of a machine tool as the machine is put into operation and vary the external temperature, the machine floor temperature. Some experiments are carried out under controlled conditions to study how machine tool components get heated up and how this heating up affects the machine’s accuracy due to thermally induced deviations. Additionally, another angle is added by varying the machine floor temperature. The parameters mentioned above are explored in line with the overall thermal stability of the machine tool and its dimensional accuracy. A Robodrill CNC machine tool is used. The CNC was first soaked with thermal energy by gradually raising the machine floor temperature to a certain level before putting the machine in operation. The machine was monitored, and analytical methods were deplored to evaluate thermal stability. Secondly, the machine was run idle for some time under raised floor temperature before it was put into operation. Data was also collected and analyzed. It is observed that machine thermal stability can be achieved in several ways depending on how the above parameters are joggled. This paper, in conclusion, reinforces the idea of machine tool warm-up process in conjunction with a carefully analyzed and established machine floor temperature variation for the approximation of the machine tool’s thermally stability to map the long-time behavior of the machine tool.
文摘Temperature distribution over the absorber plate of a parallel flow flat-plate solar collector is numerically analyzed. The governing differential equations with boundary conditions are solved numerically using fluent software. Effects of the inlet mass flux, inlet temperature and tube spacing on velocity and temperature distributions are discussed. Numerical results show that the distributions of velocity and temperature of fluid is unsymmetrical inside pipe.
基金supported by grants from:1.Young Clinical Research Fund of the Chinese Stomatological Association[grant number CSA-SIS2022-19]Sichuan Science and Technology Program:[grant number 2023NSFSC0567].
文摘Maxillary sinus floor augmentation using lateral window and crestal technique is considered as predictable methods to increase the residual bone height;however,this surgery is commonly complicated by Schneiderian membrane perforation,which is closely related to anatomical factors.This article aimed to assess anatomical factors on successful augmentation procedures.After review of the current evidence on sinus augmentation techniques,anatomical factors related to the stretching potential of Schneiderian membrane were assessed and a decision tree for the rational choice of surgical approaches was proposed.Schneiderian membrane perforation might occur when local tension exceeds its stretching potential,which is closely related to anatomical variations of the maxillary sinus.Choice of a surgical approach and clinical outcomes are influenced by the stretching potential of Schneiderian membrane.In addition to the residual bone height,clinicians should also consider the stretching potential affected by the membrane health condition,the contours of the maxillary sinus,and the presence of antral septa when evaluating the choice of surgical approaches and clinical outcomes.
基金supported by National Natural Science Foundation of China(81970986,81771125)Exploration and R&D Project of West China Hospital of Stomatology(LCYJ2020-DC-1)+1 种基金Sichuan University Postdoctoral Innovation Fund(2023SCU12040)China Postdoctoral Science Foundation funded project(2022TQ0222).
文摘This study aimed to introduce a minimally invasive technique for maxillary sinus floor elevation using the lateral approach(lSFE)and to determine the factors that influence the stability of the grafted area in the sinus cavity.Thirty patients(30 implants)treated with lSFE using minimally invasive techniques from 2015 to 2019 were included in the study.Five aspects of the implant(central,mesial,distal,buccal,and palatal bone heights[BHs])were measured using cone-beam computed tomography(CBCT)before implant surgery,immediately after surgery(T0),6 months after surgery(T1),and at the last follow-up visit(T2).Patients’characteristics were collected.A small bone window(height,(4.40±0.74)mm;length,(6.26±1.03)mm)was prepared.No implant failed during the follow-up period(3.67±1.75)years.Three of the 30 implants exhibited perforations.Changes in BH of the five aspects of implants showed strong correlations with each other and BH decreased dramatically before second-stage surgery.Residual bone height(RBH)did not significantly influence BH changes,whereas smoking status and type of bone graft materials were the potentially influential factors.During the approximate three-year observation period,lSFE with a minimally invasive technique demonstrated high implant survival rate and limited bone reduction in grafted area.In conclusion,lSFE using minimally invasive techniques was a viable treatment option.Patients who were nonsmokers and whose sinus cavity was filled with deproteinized bovine bone mineral(DBBM)had significantly limited bone resorption in grafted area.
文摘The test floor effects seen in standardised tests lead to a standardised score of 1 or less with a flat profile that hides a child’s individual strengths and needs. The Griffiths III community of practitioners requested advice on the reporting of children’s development below the floor of the test, so that individual strengths and needs can be described. This paper reports the third phase of research following an earlier Scoping Review and a wider literature review. To confirm quality control, Phase 3 was conducted in a retrospective manner using the same methodology as the earlier phases but in a reverse direction. Peer reviewer comments and key elements from the Scoping Review and keywords from the publications were tabulated. Data analysis included a change of perspective to that of the child and their individual rights with respect to the literature themes already described in Phase 2. These confirmed that there is little specific guidance in the literature, but that computational advances for homogeneous populations and especially disaggregated data offer some solutions. A greater balance between broad biopsychosocial models and standardised models of assessment should be sought by practitioners together with the use of disaggregated data to highlight issues that pertain to individual subsets of results. This will ensure that the child’s right for their individual strengths and needs to be described together with a plan for management, may be met.
文摘In order to better meet the objective requirements of the use safety of the high-rise glulam building floor structure and the living comfort of the residents,the transient excitation,environmental excitation and frequency spectrum identification methods were used to carry out experimental modal test in-site on the three rooms numbered A,B and C of the same glulam structural building.The three rooms have different functions,different floor sizes and different floor supporting structures.The research results have shown that the first-order bending frequency of the floor structure of Room A is 27.50 Hz,the transverse second-order bending frequency is 34.75 Hz,the longitudinal second-order bending frequency is 53.25 Hz,and the first-order torsional frequency is 56.25 Hz.The reinforced wooden beam at the bottom of the floor of Room A increases the transverse stiffness of the floor structure,but does not offset the anisotropy caused by the longitudinally installed glulam floors.The fundamental frequency values of the floor structures of the three rooms numbered A,B,and C are 27.5,13 and 18 Hz,respectively.This has a relatively high innovation and reference significance for integrating the theory of structural dynamic characteristics with the dynamic testing technology,improving the design level of high-rise glulam structure buildings,and improving the living comfort of residents.
文摘Objective: To investigate the effects of different delivery modes on perinatal pelvic floor muscle strength, PG, ACTH and CRP of high-risk pregnant women. Methods: 380 high-risk pregnant women who gave birth in our hospital from March 2021 to February 2022 were selected as subjects, including 100 vaginal natural delivery, 156 forceps assisted delivery and 124 cesarean section. Pelvic floor pressure, PG, ACTH, CRP, IL-6, TNF-α and IL-4, IL-10 levels were evaluated and compared. The perinatal occurrence of pelvic floor functional disease (PFD) in high-risk pregnant women in each group was analyzed and evaluated. Results: There were statistical differences in the amount of postpartum blood loss (P 0.0001, F = 99.01), postpartum blood loss 24 h (P = 0.0004, F = 19.54) and hospital stay (P 0.0001, F = 70.81) among the three groups of high-risk women in natural vaginal delivery, forceps delivery and cesarean section. In addition, there were 72, 134 and 70 cases of abnormal pelvic floor fatigue in natural vaginal delivery, forceps assisted delivery and cesarean section (P 0.0001, χ<sup>2</sup> = 30.16). There were 36, 79 and 21 cases of muscle injury, respectively (P 0.0001, χ<sup>2</sup> = 34.16). There were 49, 98 and 43 cases of dysmuscular contraction, respectively (P 0.0001, χ<sup>2</sup> = 21.94). There were 65, 120 and 41 cases with vaginal dynamic pressure 80 cm H<sub>2</sub>O (P 0.0001, χ<sup>2</sup> = 56.86), respectively. The.
文摘Dermoid cyst of the oral floor is rare benign tumour, who having three histological aspects: dermoid, teratoid and epidermoid. This one is characterized by the presence of a squamous stratified epithelium with cutaneous remnants. It may occur in any part of the body, however their frequency in the ENT sphere is relatively scarce. Seven per cent (7%) only of epidermoid cysts occur in the cervico-facial area, 1.6% of which locate at the floor level. When they are located submandibular, they can pose diagnostic difficulties and look like a tumour of the submaxillary gland. We report two cases of epidermoid cyst of the floor. Both patients suffered from swelling of the submandibular gland. Magnetic Resonance Imaging was not requested due to lack of resources. However, surgery allowed in both cases the excision of a cyst next to a normal submandibular gland. Patients did well post operatively.
文摘目的:探索术前盆底肌电生理参数对前列腺癌术后尿失禁风险的预测价值。方法:选择2020年1月至2022年10月在北京大学第一医院泌尿外科行根治性前列腺切除术患者的病例资料进行回顾性分析,记录患者的年龄、体重指数(body mass index,BMI)、国际前列腺症状评分(international prostate symptom score,IPSS)、前列腺特异性抗原(prostate-specific antigen,PSA)水平、Gleason评分、手术方式、是否尿道功能重建、是否淋巴结清扫、性神经是否保留、留置导尿时间、D’Amico风险分级、美国麻醉医师协会(American Society of Anesthesiologists,ASA)评分、查尔森(Charlson)合并症指数、术后随访时间、前列腺体积,以及盆底肌电生理参数(前静息均值、快肌均值和慢肌均值)。通过多因素Logistic回归分析,筛选出影响术后早期尿失禁发生的独立危险因素,并通过计算受试者工作特征曲线(receiver operating characteristic,ROC)下面积,评估盆底肌电参数的预测效能,再利用约登指数(Youden index)并结合临床意义,共同确定术后早期尿失禁发生的最佳临界值。结果:纳入患者271例,术后自主控尿率为81.9%。患者快肌评分为23.5(18.2,31.6)分,慢肌评分为12.5(9.6,17.3)分,179例(66.1%)患者未保留性神经,110例(40.6%)患者进行了尿道功能重建。高龄和盆底快肌评分低被确认为尿失禁发生的独立危险因素。≤60岁患者是≥70岁患者自主控尿率的5.482倍(95%CI:1.532~19.617,P<0.05);患者的盆底快肌评分与尿失禁恢复的关系密切(OR=1.209,95%CI:1.132~1.291,P<0.05)。当术前盆底快肌评分的最佳临界值设定为18.5分时,ROC的敏感度和特异度分别为80.6%和61.2%。结论:术前盆底肌电生理参数对于前列腺癌术后尿失禁风险表现出较好的预测准确性和临床应用性,能够用于前列腺癌术后尿失禁风险的早期识别,其中年龄和盆底快肌评分是重要的预测因子。