The study focuses on the flexible jumper issue of Subsurface Tension Leg Production （STLP） system concept, which is considered as a competing alternative system to support well completion devices and rigid risers in...The study focuses on the flexible jumper issue of Subsurface Tension Leg Production （STLP） system concept, which is considered as a competing alternative system to support well completion devices and rigid risers in ultra-deep water for offshore petroleum production. The paper presents analytical and numerical approaches for the optimum design and global analysis of the flexible jumper. Criteria using catenary concept are developed to define the critical length for optimum design. Based on the criteria, detailed hydrodynamic analyses including quasi-static analysis, modal analysis, and dynamic analysis are performed. Modal analysis with respect to the quasi-static analysis shows that the existence of resonant modes requires special consideration. The results of dynamic analysis confirm the effectiveness of the de-coupled effect from the jumper on STLP system. The approaches developed in the study also have wide application prospect in reference to the optimum design and analysis of any Hybrid Riser （HR） concept.展开更多
Bundled hybrid offset riser (BHOR) global strength analysis, which is more complex than single line offset riser global strength analysis, was carried out in this paper. At first, the equivalent theory is used to deal...Bundled hybrid offset riser (BHOR) global strength analysis, which is more complex than single line offset riser global strength analysis, was carried out in this paper. At first, the equivalent theory is used to deal with BHOR, and then its global strength in manifold cases was analyzed, along with the use of a three-dimensional nonlinear time domain finite element program. So the max bending stress, max circumferential stress, and max axial stress in the BHOR bundle main section (BMS) were obtained, and the values of these three stresses in each riser were obtained through the "stress distribution method". Finally, the Max Von Mises stress in each riser was given and a check was made whether or not they met the demand. This paper provides a reference for strength analysis of the bundled hybrid offset riser and some other bundled pipelines.展开更多
基金financially supported by the National Natural Science Foundation of China(Grant No.51221961)
文摘The study focuses on the flexible jumper issue of Subsurface Tension Leg Production （STLP） system concept, which is considered as a competing alternative system to support well completion devices and rigid risers in ultra-deep water for offshore petroleum production. The paper presents analytical and numerical approaches for the optimum design and global analysis of the flexible jumper. Criteria using catenary concept are developed to define the critical length for optimum design. Based on the criteria, detailed hydrodynamic analyses including quasi-static analysis, modal analysis, and dynamic analysis are performed. Modal analysis with respect to the quasi-static analysis shows that the existence of resonant modes requires special consideration. The results of dynamic analysis confirm the effectiveness of the de-coupled effect from the jumper on STLP system. The approaches developed in the study also have wide application prospect in reference to the optimum design and analysis of any Hybrid Riser （HR） concept.
基金Supported by the National Natural Science Foundation of China (Grant No.51009033)
文摘Bundled hybrid offset riser (BHOR) global strength analysis, which is more complex than single line offset riser global strength analysis, was carried out in this paper. At first, the equivalent theory is used to deal with BHOR, and then its global strength in manifold cases was analyzed, along with the use of a three-dimensional nonlinear time domain finite element program. So the max bending stress, max circumferential stress, and max axial stress in the BHOR bundle main section (BMS) were obtained, and the values of these three stresses in each riser were obtained through the "stress distribution method". Finally, the Max Von Mises stress in each riser was given and a check was made whether or not they met the demand. This paper provides a reference for strength analysis of the bundled hybrid offset riser and some other bundled pipelines.
