To address the low accuracy and stability when applying classical control theory in distribution networks with distributed generation,a control method involving flexible multistate switches(FMSs)is proposed in this st...To address the low accuracy and stability when applying classical control theory in distribution networks with distributed generation,a control method involving flexible multistate switches(FMSs)is proposed in this study.This approach is based on an improved double-loop recursive fuzzy neural network(DRFNN)sliding mode,which is intended to stably achieve multiterminal power interaction and adaptive arc suppression for single-phase ground faults.First,an improved DRFNN sliding mode control(SMC)method is proposed to overcome the chattering and transient overshoot inherent in the classical SMC and reduce the reliance on a precise mathematical model of the control system.To improve the robustness of the system,an adaptive parameter-adjustment strategy for the DRFNN is designed,where its dynamic mapping capabilities are leveraged to improve the transient compensation control.Additionally,a quasi-continuous second-order sliding mode controller with a calculus-driven sliding mode surface is developed to improve the current monitoring accuracy and enhance the system stability.The stability of the proposed method and the convergence of the network parameters are verified using the Lyapunov theorem.A simulation model of the three-port FMS with its control system is constructed in MATLAB/Simulink.The simulation result confirms the feasibility and effectiveness of the proposed control strategy based on a comparative analysis.展开更多
Voltage sags in power system may lead to serious problems such as the off-grid of distributed generation and electrical equipment failures.As a novel type of power electronic equipment,a flexible multi-state switch(FM...Voltage sags in power system may lead to serious problems such as the off-grid of distributed generation and electrical equipment failures.As a novel type of power electronic equipment,a flexible multi-state switch(FMSS)is capable to support the voltage during the grid faults.In this paper,a voltage control strategy to support the voltage in a distribution network is proposed by introducing three-port FMSS.The positive-negative-sequence compensation(PNSC)scheme is adopted to control the active and reactive current.This control scheme eliminates active power oscillations at the port of voltage sags and reduces coupling oscillations of other ports.Based on the characteristics of the voltage support under PNSC scheme,two voltage support strategies are proposed.A proportional-integral controller is introduced to provide the reactive power references,which eliminates the errors when estimating the grid voltage and impedance.A current limiting scheme is adopted to keep the port current in a safe range by adjusting the active and reactive power references.The voltage support strategies in two different voltage sags are simulated,and results show the feasibility and effectiveness of the proposed control strategies.展开更多
Unipolar resistive switching behaviors of the ZnO and ALO/ZnO films fabricated on flexible substrates by pulse laser deposition were studied in this paper. The films were deposited at room temperature without post-ann...Unipolar resistive switching behaviors of the ZnO and ALO/ZnO films fabricated on flexible substrates by pulse laser deposition were studied in this paper. The films were deposited at room temperature without post-annealing treatment during the process. Xray diffraction results indicated that ZnO film has a dominant peak at(002). Scanning electron microscopy observation showed a columnar grain structure of the ZnO film to the substrate. The bilayer device of ALO/ZnO films had stable resistive switching behaviors with a good endurance performance of more than 200 cycles, high resistive switching ratio of over 103 at a read voltage of 0.1V, which is better than that of the single oxide layer device of ZnO film. A possible resistive switching filamentary mode was demonstrated in this paper. The conduction mechanisms of high and low resistance states can be explained by space charge limited conduction and Ohmic’s behaviors. The endurance of the bilayer(BL) device was not degraded upon bending cycles, which indicates the potential of the flexible resistive switching random access memory applications.展开更多
The novel BaTiO3/BiFeO3/TiO2 multilayer heterojunction is prepared on a fluorine-doped tinoxide(FTO) substrate by the sol–gel method. The results indicate that the Pt/Ba TiO3/BiFeO3/TiO2/FTO heterojunction exhibits s...The novel BaTiO3/BiFeO3/TiO2 multilayer heterojunction is prepared on a fluorine-doped tinoxide(FTO) substrate by the sol–gel method. The results indicate that the Pt/Ba TiO3/BiFeO3/TiO2/FTO heterojunction exhibits stable bipolar resistive switching characteristic, good retention performance, and reversal characteristic. Under different pulse voltages and light fields, four stable resistance states can also be realized. The analysis shows that the main conduction mechanism of the resistive switching characteristic of the heterojunction is space charge limited current(SCLC) effect. After the comprehensive analysis of the band diagram and the P–E ferroelectric property of the multilayer heterojunction, we can deduce that the SCLC is formed by the effect of the oxygen vacancy which is controlled by ferroelectric polarizationmodulated change of interfacial barrier. And the effective photo-generated carrier also plays a regulatory role in resistance state(RS), which is formed by the double ferroelectric layer Ba TiO3/BiFeO3 under different light fields. This research is of potential application values for developing the multi-state non-volatile resistance random access memory(RRAM) devices based on ferroelectric materials.展开更多
大规模分布式电源的存在允许配电网通过网络重构改变供电方式,实现部分区域在必要时刻以异步孤岛形式运行。但配电网运行方式的改变必然伴随着关键换流器控制模式的切换和参数的调整,如何平稳地实现配电分区在并网和孤岛之间的转换是实...大规模分布式电源的存在允许配电网通过网络重构改变供电方式,实现部分区域在必要时刻以异步孤岛形式运行。但配电网运行方式的改变必然伴随着关键换流器控制模式的切换和参数的调整,如何平稳地实现配电分区在并网和孤岛之间的转换是实现有源配电网安全可靠运行的重要内容。针对通过软开关(soft open point,SOP)实现柔性互联的配电分区,分析了该系统由并网转为异步孤岛运行的暂态特性,提出了基于参考功率自适应的改进下垂控制策略,并采用状态跟踪方法降低了配电网运行状态切换时刻的暂态波动,实现了配电网运行方式的平滑切换。在PSCAD/EMTDC环境下搭建了仿真模型进行验证,结果表明,所提控制方法可有效提升分区互联有源配电网运行的灵活性。展开更多
基金the Natural Science Foundation of Fujian,China(No.2021J01633).
文摘To address the low accuracy and stability when applying classical control theory in distribution networks with distributed generation,a control method involving flexible multistate switches(FMSs)is proposed in this study.This approach is based on an improved double-loop recursive fuzzy neural network(DRFNN)sliding mode,which is intended to stably achieve multiterminal power interaction and adaptive arc suppression for single-phase ground faults.First,an improved DRFNN sliding mode control(SMC)method is proposed to overcome the chattering and transient overshoot inherent in the classical SMC and reduce the reliance on a precise mathematical model of the control system.To improve the robustness of the system,an adaptive parameter-adjustment strategy for the DRFNN is designed,where its dynamic mapping capabilities are leveraged to improve the transient compensation control.Additionally,a quasi-continuous second-order sliding mode controller with a calculus-driven sliding mode surface is developed to improve the current monitoring accuracy and enhance the system stability.The stability of the proposed method and the convergence of the network parameters are verified using the Lyapunov theorem.A simulation model of the three-port FMS with its control system is constructed in MATLAB/Simulink.The simulation result confirms the feasibility and effectiveness of the proposed control strategy based on a comparative analysis.
基金This work was supported by the National Key R&D Program of China(No.2017YFB0903100)Science and Technology Projects of State Grid Corporation of China(No.521104170043).
文摘Voltage sags in power system may lead to serious problems such as the off-grid of distributed generation and electrical equipment failures.As a novel type of power electronic equipment,a flexible multi-state switch(FMSS)is capable to support the voltage during the grid faults.In this paper,a voltage control strategy to support the voltage in a distribution network is proposed by introducing three-port FMSS.The positive-negative-sequence compensation(PNSC)scheme is adopted to control the active and reactive current.This control scheme eliminates active power oscillations at the port of voltage sags and reduces coupling oscillations of other ports.Based on the characteristics of the voltage support under PNSC scheme,two voltage support strategies are proposed.A proportional-integral controller is introduced to provide the reactive power references,which eliminates the errors when estimating the grid voltage and impedance.A current limiting scheme is adopted to keep the port current in a safe range by adjusting the active and reactive power references.The voltage support strategies in two different voltage sags are simulated,and results show the feasibility and effectiveness of the proposed control strategies.
基金supported by the National Key Research and Development Program of China under Grant No.2016YFB0700201the National Natural Science Foundation of China under Grant No.51372030
文摘Unipolar resistive switching behaviors of the ZnO and ALO/ZnO films fabricated on flexible substrates by pulse laser deposition were studied in this paper. The films were deposited at room temperature without post-annealing treatment during the process. Xray diffraction results indicated that ZnO film has a dominant peak at(002). Scanning electron microscopy observation showed a columnar grain structure of the ZnO film to the substrate. The bilayer device of ALO/ZnO films had stable resistive switching behaviors with a good endurance performance of more than 200 cycles, high resistive switching ratio of over 103 at a read voltage of 0.1V, which is better than that of the single oxide layer device of ZnO film. A possible resistive switching filamentary mode was demonstrated in this paper. The conduction mechanisms of high and low resistance states can be explained by space charge limited conduction and Ohmic’s behaviors. The endurance of the bilayer(BL) device was not degraded upon bending cycles, which indicates the potential of the flexible resistive switching random access memory applications.
基金Project supported by the Scientific Research Program of Hunan Provincial Education Department,China(Grant No.18C0232)the International Cooperative Extension Program of Changsha University of Science and Technology,China(Grant No.2019IC35)
文摘The novel BaTiO3/BiFeO3/TiO2 multilayer heterojunction is prepared on a fluorine-doped tinoxide(FTO) substrate by the sol–gel method. The results indicate that the Pt/Ba TiO3/BiFeO3/TiO2/FTO heterojunction exhibits stable bipolar resistive switching characteristic, good retention performance, and reversal characteristic. Under different pulse voltages and light fields, four stable resistance states can also be realized. The analysis shows that the main conduction mechanism of the resistive switching characteristic of the heterojunction is space charge limited current(SCLC) effect. After the comprehensive analysis of the band diagram and the P–E ferroelectric property of the multilayer heterojunction, we can deduce that the SCLC is formed by the effect of the oxygen vacancy which is controlled by ferroelectric polarizationmodulated change of interfacial barrier. And the effective photo-generated carrier also plays a regulatory role in resistance state(RS), which is formed by the double ferroelectric layer Ba TiO3/BiFeO3 under different light fields. This research is of potential application values for developing the multi-state non-volatile resistance random access memory(RRAM) devices based on ferroelectric materials.
文摘大规模分布式电源的存在允许配电网通过网络重构改变供电方式,实现部分区域在必要时刻以异步孤岛形式运行。但配电网运行方式的改变必然伴随着关键换流器控制模式的切换和参数的调整,如何平稳地实现配电分区在并网和孤岛之间的转换是实现有源配电网安全可靠运行的重要内容。针对通过软开关(soft open point,SOP)实现柔性互联的配电分区,分析了该系统由并网转为异步孤岛运行的暂态特性,提出了基于参考功率自适应的改进下垂控制策略,并采用状态跟踪方法降低了配电网运行状态切换时刻的暂态波动,实现了配电网运行方式的平滑切换。在PSCAD/EMTDC环境下搭建了仿真模型进行验证,结果表明,所提控制方法可有效提升分区互联有源配电网运行的灵活性。
