Two-Layer Contact Nonlinear Mechanical Analysis of Flexible Drilling Tool in the Wellbore

The lack of research on flexible drilling tool leads to limited application of ultra-short radius horizontal wells.The flexible drilling tool is different from the conventional drilling tool.The flexible drilling pipe involves a mutual transition between the structure and the mechanism during the deformation process.At the same time,the flexible drilling pipe and the eccentric guide tube,the guide tube and the wellbore generate random contact.In this paper,3-D beam elements,universal joint elements,rigid beam elements and the beam-beam contact elements are combined to establish a two-layer contact nonlinear finite element model of the flexible drilling tool in the wellbore.The dynamic relaxation method is introduced for numerical solution.The feasibility of the model and the algorithm is verified by an example.The mechanical analysis of flexible drilling tool under the four hole inclinations in the oblique section is carried out.It is found that the flexible drilling pipe has a“folded line”deformation.The contact force between the flexible drilling pipe and the guide tube is randomly distributed.The contact force between the guide tube and the wellbore in the oblique section is greater than that in the vertical section.As the hole inclinations increase,the torque and axial force transmitted to the drill bit gradually decrease.

Flexible servo riveting system control strategy based on the RBF network and self-pierce riveting process

As more and more composite materials are used in lightweight vehicle white bodies,self-pierce riveting(SPR)technology has attracted great attention.However,the existing riveting tools still have the disadvantages of low efficiency and flexibility.To improve these disadvantages and the riveting qualification rate,this paper improves the control scheme of the existing riveting tools,and proposes a novel controller design approach of the flexible servo riveting system based on the RBF network and SPR process.Firstly,this paper briefly introduces the working principle and SPR procedure of the servo riveting tool.Then a moving component force analysis is performed,which lays the foundation for the motion control.Secondly,the riveting quality inspection rules of traditional riveting tools are used for reference to plan the force-displacement curve autonomously.To control this process,the riveting force is fed back into the closed-loop control of the riveting tool and the riveting speed is computed based on the admittance control algorithm.Then,this paper adopts the permanent magnet synchronous motor(PMSM)as the power of riveting tool,and proposes an integral sliding mode control approach based on the improved reaching law and the radial basis function(RBF)network friction compensation for the PMSM speed control.Finally,the proposed control approach is simulated by Matlab,and is applied to the servo riveting system designed by our laboratory.The simulation and riveting results show the feasibility of the designed controller.

Research on the Coordinated Control of the Multi-point Array Support Force of Complex Structural Parts

Multi-point array flexible tooling based on multilateration is widely used in the processing and manufacturing of complex curved surface parts. However, during the positioning of workpieces, the force exerted on each flexible support point is not uniform, and there exists force coupling between the support units. In response to the force coupling problem in the multi-point array positioning support process, a coordinated control method for the support force of multi-point array positioning combining correlation coefficient and regression analysis was proposed in this paper. The Spearman correlation coefficient was adopted in this method to study the force coupling correlation between positioning points, and a mathematical model of force coupling was established between positioning units through regression analysis, which can quickly and accurately perform coordinated control of the multilateration support system, and effectively improve the force interference of the multi-point array positioning support scene.