CES Flights Smoothly Moving Eastward

At 8:30 on October 27, the first international flight from Shanghai to Singapore MU576 took off at Pudong Airport. Thus,all international flights and those to Hong Kong and Macao were all moved to Pudong Airport. Besides internationalflights and Hong Kong and Macao flights, the eastward moving also cover some domestic flights, namely flights fromSanya, Haikou, Guangzhou, Shenzhen, Zhuhai, Qingdao, Yantai, Weihai, Weifang and so on in Northwest China, Mid-South China,and East China to Shanghai. After the eastward moving, the flight distribution at two airports in Shanghai changed greatly.

Lévy Flights, 1/<i>f </i>Noise and Self Organized Criticality

A new analysis of a previously studied traveling agent model, showed that there is a relation between the degree of homogeneity of the medium where the agents move, agent motion patterns, and the noise generated from their displacements. We proved that for a particular value of homogeneity, the system self organizes in a state where the agents carry out Lévy walks and the displacement signal corresponds to 1/f noise. Using probabilistic arguments, we conjectured that 1/f noise is a fingerprint of a statistical phase transition, from randomness (disorder) to predictability (order), and that it emerges from the contextuality nature of the system which generates it.

Research on the Recovery of Irregular Flights under Uncertain Conditions

This paper mainly studies the problem of irregular flights recovery under uncertain conditions. Based on the analysis of the uncertain factors affecting the flight, taking the total delay time and the total cost of flight delay as the objective function, and considering the constraints of flight plan and passenger journey, an uncertain objective programming model is constructed. Finally, taking OVS airport temporarily closed due to bad weather as an example, the results show that better quality optimization scheme can be obtained by integrating passenger recovery with narrow sense flight recovery stage and implementing integrated recovery.

LM-3A Carrier Rocket Family Achieved 100 Flights

At 22:41 Beijing time on April 20,a LM-3B launch vehicle lifted off from the Xichang Satellite Launch Center and successfully launched the 44th satellite of the BeiDou Navigation Satellite System into its preset orbit.This was the 100th flight of the LM-3A carrier rocket family and the 302nd flight of the Long March series launch vehicle.

第二代FlightSense的ToF激光测距的工程设计考量

ToF激光测距的精准度更高,可用于手机、控制面板和家庭服务机器人等。近日,ST公司推出了第二代Flight Sense,并介绍了其原理及工程设计理念。

Effects of dynamical spanwise retraction and stretch on flapping-wing forward flights

Birds and bats retract and stretch their wings dynamically during each flap in level flights, implying intriguing mechanisms for the aerodynamic performance improvement of flapping wings. A numerical investigation into the aerodynamic effects of such bio-inspired concept in forward flights has been performed based on a three-dimensional wing in plunging motion and a twosection wing in flapping motion. The currently considered Reynolds number and Strouhal number are Re=1.5×10^(5) and St=0.3, respectively. During the research, the mean angle of attack is varied in relatively wide ranges to achieve lift-thrust interconversion for the wings. The conclusive results show that dynamical spanwise retraction and stretch has induced three absolutely desirable scenarios for the oscillating wings in forward flights, namely producing more lift and consuming less power for a given thrust generation, producing more thrust and consuming less power for a given lift generation, and producing more lift and more thrust while consuming less power. Furthermore,the morphing wings have alleviated periodical aerodynamic load fluctuations compared with the non-morphing baseline. The mechanism of the aerodynamic effects of the bionic morphing mode is analyzed with the aid of field visualization. The current article is the first to reveal the absolute advantages of the bionic spanwise morphing. Hopefully, it may help comprehend the behaviors of natural fliers and provide inspirations for performance enhancement of micro artificial flappingwing vehicles.

基于改进粒子群优化的物流运输车路径规划方法

物流运输车路径规划问题是一个复杂的组合优化问题,因此,文章提出了一种基于改进粒子群优化算法的物流运输车路径规划方法,对粒子群优化算法中的惯性权值、学习因子和随机数进行了改进,并在算法的优化过程中引入了Levy flight模型,以避免过早的粒子群优化。并将该方法与蚁群算法和遗传算法进行了实验对比。实验结果表明,该方法能够有效降低了运输车的路径距离,显著提高物流运输的效率,降低了运输成本。

The Crested Ibises expanding to plain areas exhibit a higher tolerance of human proximity

Animals must strike a balance between anti-predation behavior and other essential behaviors,such as foraging.Within the same species,strategies may vary on individuals’risk-taking preferences,and in this process the environment is a determinant,in addition to predator regime.The Crested Ibis(Nipponia nippon)exhibits such tendency.This is an endangered species,once inhabiting exclusively in China’s Qinling Mountain.This used to be the sole remaining wild population.However,over recent decades,this population has expanded.A portion has relocated to breed in the lower plain area,which is characterized by elevated level of human activities and landscape complexity.We used flight initiation distance(FID)as an indicator of the ibises’risk-taking preference,particularly their response to human proximity.Additionally,we examined the environmental factors influencing their foraging site selection,including altitude,terrain openness,human activity intensity and human construction.Our findings revealed a significantly shorter FID among individuals relocating to plain habitats,indicating a higher tolerance of human proximity.The results showed that FID decreased with distance to the nearest human settlement.Another finding is that FID was independent of instant human activity intensity and environmental factors(altitude and terrain openness).These different may arise from various combinations of human activity,predation risk,and food abundance within the two habitats.These results provide insights into the in situ conservation of the threatened species within the context of global urbanization.

An intelligent control method based on artificial neural network for numerical flight simulation of the basic finner projectile with pitching maneuver

In this paper,an intelligent control method applying on numerical virtual flight is proposed.The proposed algorithm is verified and evaluated by combining with the case of the basic finner projectile model and shows a good application prospect.Firstly,a numerical virtual flight simulation model based on overlapping dynamic mesh technology is constructed.In order to verify the accuracy of the dynamic grid technology and the calculation of unsteady flow,a numerical simulation of the basic finner projectile without control is carried out.The simulation results are in good agreement with the experiment data which shows that the algorithm used in this paper can also be used in the design and evaluation of the intelligent controller in the numerical virtual flight simulation.Secondly,combined with the real-time control requirements of aerodynamic,attitude and displacement parameters of the projectile during the flight process,the numerical simulations of the basic finner projectile’s pitch channel are carried out under the traditional PID(Proportional-Integral-Derivative)control strategy and the intelligent PID control strategy respectively.The intelligent PID controller based on BP(Back Propagation)neural network can realize online learning and self-optimization of control parameters according to the acquired real-time flight parameters.Compared with the traditional PID controller,the concerned control variable overshoot,rise time,transition time and steady state error and other performance indicators have been greatly improved,and the higher the learning efficiency or the inertia coefficient,the faster the system,the larger the overshoot,and the smaller the stability error.The intelligent control method applying on numerical virtual flight is capable of solving the complicated unsteady motion and flow with the intelligent PID control strategy and has a strong promotion to engineering application.

When Fleeing Matters:Differences in Escape Behaviours of Three Northeast Asian Anurans

Prey species may have their own optimal escape strategy to balance predation risks and the energetic cost of fleeing.Some species have an advantage when maintaining a short fleeing distance,while others may favour an earlier escape based on microhabitat,size,or body condition.Here,we examined the escape behaviour of the three syntopic Northeast Asian anuran species:Mongolian toads(Strauchbufo raddei),Amur brown frogs(Rana amurensis),and Japanese treefrogs(Dryophytes japonicus)in Mongolia,Russia,China and DPR Korea.We examined flight initiation distance(FID;the distance from a potential predator to the point when the individual starts to flee)and distance fled(DF;distance between flight initiation and flight termination points)of each species and the effects of microhabitat,sex,and body size.Strauchbufo raddei and R.amurensis had a longer FID than D.japonicus,and S.raddei also had a longer DF than D.japonicus.These trends remained similar when dividing FID and DF by a size proxy(snout-vent length)for all individuals.This suggests that the treefrog D.japonicus used a strategy to stay immobile even when they were detected,and the toad S.raddei reacted quicker and more sensitively to predators despite the presence of toxin.Female S.raddei had a significantly longer FID than males suggesting that females are more sensitive to predation risk in this species,but body size was not significant for any of the three species.Our results indicate that the three sympatric species have different escaping strategies,likely related to differences in physiology and crypticity.

Investigations of the mechanical response of dummy HTPB propellant grain under ultrahigh acceleration overload conditions using onboard flight-test measurements

In this paper,to study the mechanical responses of a solid propellant subjected to ultrahigh acceleration overload during the gun-launch process,specifically designed projectile flight tests with an onboard measurement system were performed.Two projectiles containing dummy HTPB propellant grains were successfully recovered after the flight tests with an ultrahigh acceleration overload value of 8100 g.The onboard-measured time-resolved axial displacement,contact stress and overload values were successfully obtained and analysed.Uniaxial compression tests of the dummy HTPB propellant used in the gunlaunched tests were carried out at low and intermediate strain rates to characterize the propellant's dynamic properties.A linear viscoelastic constitutive model was employed and applied in finite-element simulations of the projectile-launching process.During the launch process,the dummy propellant grain exhibited large deformation due to the high acceleration overload,possibly leading to friction between the motor case and propellant grain.The calculated contact stress showed good agreement with the experimental results,though discrepancies in the overall displacement of the dummy propellant grain were observed.The dynamic mechanical response process of the dummy propellant grain was analysed in detail.The results can be used to estimate the structural integrity of the analysed dummy propellant grain during the gun-launch process.

Flight Time Minimization of UAV for Cooperative Data Collection in Probabilistic LoS Channel

This paper investigates the data collection in an unmanned aerial vehicle(UAV)-aided Internet of Things(IoT) network, where a UAV is dispatched to collect data from ground sensors in a practical and accurate probabilistic line-of-sight(LoS) channel. Especially, access points(APs) are introduced to collect data from some sensors in the unlicensed band to improve data collection efficiency. We formulate a mixed-integer non-convex optimization problem to minimize the UAV flight time by jointly designing the UAV 3D trajectory and sensors’ scheduling, while ensuring the required amount of data can be collected under the limited UAV energy. To solve this nonconvex problem, we recast the objective problem into a tractable form. Then, the problem is further divided into several sub-problems to solve iteratively, and the successive convex approximation(SCA) scheme is applied to solve each non-convex subproblem. Finally,the bisection search is adopted to speed up the searching for the minimum UAV flight time. Simulation results verify that the UAV flight time can be shortened by the proposed method effectively.

Identifying influential spreaders in social networks: A two-stage quantum-behaved particle swarm optimization with Lévy flight

The influence maximization problem aims to select a small set of influential nodes, termed a seed set, to maximize their influence coverage in social networks. Although the methods that are based on a greedy strategy can obtain good accuracy, they come at the cost of enormous computational time, and are therefore not applicable to practical scenarios in large-scale networks. In addition, the centrality heuristic algorithms that are based on network topology can be completed in relatively less time. However, they tend to fail to achieve satisfactory results because of drawbacks such as overlapped influence spread. In this work, we propose a discrete two-stage metaheuristic optimization combining quantum-behaved particle swarm optimization with Lévy flight to identify a set of the most influential spreaders. According to the framework,first, the particles in the population are tasked to conduct an exploration in the global solution space to eventually converge to an acceptable solution through the crossover and replacement operations. Second, the Lévy flight mechanism is used to perform a wandering walk on the optimal candidate solution in the population to exploit the potentially unidentified influential nodes in the network. Experiments on six real-world social networks show that the proposed algorithm achieves more satisfactory results when compared to other well-known algorithms.

Fixed-Time Sliding Mode Control With Varying Exponent Coefficient for Modular Reconfigurable Flight Arrays

The modular system can change its physical structure by self-assembly and self-disassembly between modules to dynamically adapt to task and environmental requirements. Recognizing the adaptive capability of modular systems, we introduce a modular reconfigurable flight array(MRFA) to pursue a multifunction aircraft fitting for diverse tasks and requirements,and investigate the attitude control and the control allocation problem by using the modular reconfigurable flight array as a platform. First, considering the variable and irregular topological configuration of the modular array, a center-of-mass-independent flight array dynamics model is proposed to allow control allocation under over-actuated situations. Secondly, in order to meet the stable, fast and accurate attitude tracking performance of the MRFA, a fixed-time convergent sliding mode controller with state-dependent variable exponent coefficients is proposed to ensure fast convergence rate both away from and near the system equilibrium point without encountering the singularity. It is shown that the controller also has fixed-time convergent characteristics even in the presence of external disturbances. Finally,simulation results are provided to demonstrate the effectiveness of the proposed modeling and control strategies.

Variation of microbiological and small molecule metabolite profiles of Nuodeng ham during ripening by high-throughput sequencing and GC-TOF-MS

The internal microbial diversity and small molecular metabolites of Nuodeng ham in different processing years(the first,second and third year sample)were analyzed by high-throughput sequencing technology and gas chromatography-time of flight mass spectrography(GC-TOF-MS)to study the effects of microorganisms and small molecular metabolites on the quality of ham in different processing years.The results showed that the dominant bacteria phyla of Nuodeng ham in different processing years were Proteobacteria and Firmicutes,the dominant fungi phyla were Ascomycota and Basidiomycota,while Staphylococcus and Aspergillus were the dominant bacteria and fungi of Nuodeng ham,respectively.Totally,252 kinds of small molecular metabolites were identified from Nuodeng ham in different processing years,and 12 different metabolites were screened through multivariate statistical analysis.Further metabolic pathway analysis showed that 23 metabolic pathways were related to ham fermentation,of which 8 metabolic pathways had significant effects on ham fermentation(Impact>0.01,P<0.05).The content of L-proline,phenyllactic acid,L-lysine,carnosine,taurine,D-proline,betaine and creatine were significantly positively correlated with the relative abundance of Staphylococcus and Serratia,but negatively correlated with the relative abundance of Halomonas,Aspergillus and Yamadazyma.

Design methodology of a mini-missile considering flight performance and guidance precision

The design of mini-missiles(MMs)presents several novel challenges.The stringent mission requirement to reach a target with a certain precision imposes a high guidance precision.The miniaturization of the size of MMs makes the design of the guidance,navigation,and control(GNC)have a larger-thanbefore impact on the main-body design(shape,motor,and layout design)and its design objective,i.e.,flight performance.Pursuing a trade-off between flight performance and guidance precision,all the relevant interactions have to be accounted for in the design of the main body and the GNC system.Herein,a multi-objective and multidisciplinary design optimization(MDO)is proposed.Disciplines pertinent to motor,aerodynamics,layout,trajectory,flight dynamics,control,and guidance are included in the proposed MDO framework.The optimization problem seeks to maximize the range and minimize the guidance error.The problem is solved by using the nondominated sorting genetic algorithm II.An optimum design that balances a longer range with a smaller guidance error is obtained.Finally,lessons learned about the design of the MM and insights into the trade-off between flight performance and guidance precision are given by comparing the optimum design to a design provided by the traditional approach.

The Relation between Mental Workload and Face Temperature in Flight Simulation

In this research, we study the relationship between mental workload and facial temperature of aircraft participants during a simulated takeoff flight. We conducted experiments to comprehend the correlation between work and facial temperature within the flight simulator. The experiment involved a group of 10 participants who played the role of pilots in a simulated A-320 flight. Six different flying scenarios were designed to simulate normal and emergency situations on airplane takeoff that would occur in different levels of mental workload for the participants. The measurements were workload assessment, face temperatures, and heart rate monitoring. Throughout the experiments, we collected a total of 120 instances of takeoffs, together with over 10 hours of time-series data including heart rate, workload, and face thermal images and temperatures. Comparative analysis of EEG data and thermal image types, revealed intriguing findings. The results indicate a notable inverse relationship between workload and facial muscle temperatures, as well as facial landmark points. The results of this study contribute to a deeper understanding of the physiological effects of workload, as well as practical implications for aviation safety and performance.

Influence of the number of flights on the dilute phase ratio in flighted rotating drums by PTV measurements and DEM simulations

Particle distribution in the cross-section of the flighted rotating drum(FRD)is critical to the analysis of heat and mass transfer between gas and solids.In this work,the particle tracking velocimetry(PTV)method is applied to study the influence of the number of flights on the particle motion in FRDs.The drum,installed with 1,4,8,or 12 rectangular flights,is filled with plastic balls to 15%and operated at various rotating speeds ranging from 10 rpm to 30 rpm.The results show that the number of flights has different effects on the holdup ratio and cascading rate of single flight and active flights.With 8 and 12 flights,the FRD produces a larger and more stable particle ratio of the dilute phase.Moreover,DEM simulations agree with PTV measurements,whereas literature models show significant deviations.

Research on Teaching Methods of Flight Control Principles

With the rapid development of China’s civil aviation industry,the teaching method of operating knowledge of flight principles has changed greatly,which creates a good implementation environment to improve the safety of civil aviation in our country.At present,the main training content of air route transport pilots in China is basic aviation theory,initial flight training,airline modification,etc.The principles of flight control are an important part of basic aviation theoretical knowledge training,which will involve a large number of flight technology training content,instructors will also be based on the pilot type.Teaching flight control theory and practical knowledge requires relatively high theoretical learning ability of students,and the learning effect of this part of theoretical knowledge will directly affect the quality of subsequent learning,but also directly affect the effectiveness of flight training.This paper focuses on the analysis of the basic concepts of flight control,studies the existing problems in the teaching of flight control principles,summarizes the teaching measures of flight control principles,aiming to provide a reference to teaching personnel.