Dynamic response of mountain tunnel,bridge,and embankment along the Sichuan-Tibet transportation corridor to active fault based on model tests

The Sichuan-Tibet transportation corridor is prone to numerous active faults and frequent strong earthquakes.While extensive studies have individually explored the effect of active faults and strong earthquakes on different engineering structures,their combined effect remains unclear.This research employed multiple physical model tests to investigate the dynamic response of various engineering structures,including tunnels,bridges,and embankments,under the simultaneous influence of cumulative earthquakes and stick-slip misalignment of an active fault.The prototype selected for this study was the Kanding No.2 tunnel,which crosses the Yunongxi fault zone within the Sichuan-Tibet transportation corridor.The results demonstrated that the tunnel,bridge,and embankment exhibited amplification in response to the input seismic wave,with the amplification effect gradually decreasing as the input peak ground acceleration(PGA)increased.The PGAs of different engineering structures were weakened by the fault rupture zone.Nevertheless,the misalignment of the active fault may decrease the overall stiffness of the engineering structure,leading to more severe damage,with a small contribution from seismic vibration.Additionally,the seismic vibration effect might be enlarged with the height of the engineering structure,and the tunnel is supposed to have a smaller PGA and lower dynamic earth pressure compared to bridges and embankments in strong earthquake zones crossing active faults.The findings contribute valuable insights for evaluating the dynamic response of various engineering structures crossing an active fault and provide an experimental reference for secure engineering design in the challenging conditions of the Sichuan-Tibet transportation corridor.

Influence of Transportation Accessibility on Urban-rural Income Disparity and Its Spatial Heterogeneity

Transportation accessibility has been treated as an important means of reducing the urban-rural income disparity.However,only a few studies have examined the effects of different types of transportation accessibility on urban-rural income disparity and their spatial heterogeneity.Based on data from 285 prefecture-level(and above)Chinese cities in 2000,2005,2010,2015,and 2020,this study uses spatial econometric models to examine how highway accessibility and railway accessibility influence the urban-rural income disparity and to identify their spatial heterogeneity.The result reveals that highway accessibility and railway accessibility have‘coreperiphery’ring-like circle structures.The urban-rural income disparity exhibits strong spatial clustering effects.Both highway accessibility and railway accessibility are negatively associated with urban-rural income disparity,and the former having a greater effect size.Moreover,there is a substitution effect between highway accessibility and railway accessibility in the whole sample.Furthermore,these associations differ in geographic regions.In the central region,highway accessibility is more important in reducing the urban-rural income disparity,but its effect is weakened with the increase of railway accessibility.In the western region,railway accessibility has a larger effect on narrowing the urban-rural income disparity,and this effect is strengthened by the increase of highway accessibility.We conclude that improving transportation accessibility is conducive to reducing the urban-rural income disparity but its effect is spatial heterogenetic.Highways and railways should be developed in a coordinated manner to promote an integrated transport network system.

A Study on Integrated Construction of Luzhou Comprehensive Transportation Hub

The target of integrated construction of comprehensive transportation hub is to integrate the traffic resources,achieve butt joint of pan-regional transportation mode,and finally realize the"seamless connection"of the goods and"zero transfer"of the passenger traffic.Relying on the particularity of the geographical location and the convenience of the Yangtze River channel,Luzhou puts forth effort to build a comprehensive transport hub in Southern Sichuan and has made great efforts in traffic infrastructure construction.However,there are still some problems.Combining practice of Luzhou,using the advanced experience of foreign and domestic cities for reference,the paper pointed out that for the sake of constructing a comprehensive transportation hub,we need to build the traffic integration on the basis of the efficiency.Besides,the paper proposed the strategies for construction.

Optimizing a Transportation System Using Metaheuristics Approaches (EGD/GA/ACO): A Forest Vehicle Routing Case Study

The large-scale optimization problem requires some optimization techniques, and the Metaheuristics approach is highly useful for solving difficult optimization problems in practice. The purpose of the research is to optimize the transportation system with the help of this approach. We selected forest vehicle routing data as the case study to minimize the total cost and the distance of the forest transportation system. Matlab software helps us find the best solution for this case by applying three algorithms of Metaheuristics: Genetic Algorithm (GA), Ant Colony Optimization (ACO), and Extended Great Deluge (EGD). The results show that GA, compared to ACO and EGD, provides the best solution for the cost and the length of our case study. EGD is the second preferred approach, and ACO offers the last solution.

Research on a TOPSIS energy efficiency evaluation system for crude oil gathering and transportation systems based on a GA-BP neural network

As the main link of ground engineering,crude oil gathering and transportation systems require huge energy consumption and complex structures.It is necessary to establish an energy efficiency evaluation system for crude oil gathering and transportation systems and identify the energy efficiency gaps.In this paper,the energy efficiency evaluation system of the crude oil gathering and transportation system in an oilfield in western China is established.Combined with the big data analysis method,the GA-BP neural network is used to establish the energy efficiency index prediction model for crude oil gathering and transportation systems.The comprehensive energy consumption,gas consumption,power consumption,energy utilization rate,heat utilization rate,and power utilization rate of crude oil gathering and transportation systems are predicted.Considering the efficiency and unit consumption index of the crude oil gathering and transportation system,the energy efficiency evaluation system of the crude oil gathering and transportation system is established based on a game theory combined weighting method and TOPSIS evaluation method,and the subjective weight is determined by the triangular fuzzy analytic hierarchy process.The entropy weight method determines the objective weight,and the combined weight of game theory combines subjectivity with objectivity to comprehensively evaluate the comprehensive energy efficiency of crude oil gathering and transportation systems and their subsystems.Finally,the weak links in energy utilization are identified,and energy conservation and consumption reduction are improved.The above research provides technical support for the green,efficient and intelligent development of crude oil gathering and transportation systems.

An Efficient Approach for Transforming Unbalanced Transportation Problems into Balanced Problems in Order to Find Optimal Solutions

In operations research, the transportation problem (TP) is among the earliest and most effective applications of the linear programming problem. Unbalanced transportation problems reflect the reality of supply chain and logistics situations where the available supply of goods may not precisely match the demand at different locations. To deal with an unbalanced transportation problem (UTP), it is essential first to convert it into a balanced transportation problem (BTP) to find an initial basic feasible solution (IBFS) and hence the optimal solution. The present paper is concerned with introducing a new approach to convert an unbalanced transportation problem into a balanced one and as a consequence to obtain optimum total transportation cost. Numerical examples are provided to demonstrate the suggested method.

Analysis of Historic Pavement and Bridge Conditions and Alternative Funding Levels for the Michigan Department of Transportation

In 1997 the Michigan Department of Transportation (MDOT) established an ambitious set of condition targets for its pavements and bridges, and the Department received increased revenue from a 4-cent-per-gallon increase in the state motor fuels tax to help meet its targets. However, over time, actual revenue was less than both what was initially estimated as needed to meet the targets and what was projected from the tax increase. Consequently, actual conditions were projected to fall short of the target levels, so the department issued bonds to address the shortfall through 2012. To support deliberations on future funding, in 2013 MDOT performed an analysis of historic conditions to determine what additional fuel tax revenues would have been required beginning in 1997 to: replace bond revenues used to fund pavement and bridge projects from 1997 to 2012;and enable MDOT to meet its condition targets. The analysis was performed using data on actual pavement and bridge funding and conditions;as well as predicted funding and conditions for different hypothetical increases in fuel taxes. The analysis concluded that, in addition to the actual increase of 4 cents per gallon, a fuel tax increase of another 10 cents per gallon would have been required in 1997 to replace bond revenue used for pavement and bridges and allow MDOT to meet its condition targets. The analysis results were used to help inform the discussion of Michigan’s target asset conditions and funding, and demonstrate application of MDOT’s pavement and bridge management systems for performing historic analyses.

A Study on Optimizing the Double-Spine Type Flow Path Design for the Overhead Transportation System Using Tabu Search Algorithm

Optimizing Flow Path Design(FPD)is a popular research area in transportation system design,but its application to Overhead Transportation Systems(OTSs)has been limited.This study focuses on optimizing a double-spine flow path design for OTSs with 10 stations by minimizing the total travel distance for both loaded and empty flows.We employ transportation methods,specifically the North-West Corner and Stepping-Stone methods,to determine empty vehicle travel flows.Additionally,the Tabu Search(TS)algorithm is applied to branch the 10 stations into two main layout branches.The results obtained from our proposed method demonstrate a reduction in the objective function value compared to the initial feasible solution.Furthermore,we explore howchanges in the parameters of the TS algorithm affect the optimal result.We validate the feasibility of our approach by comparing it with relevant literature and conducting additional tests on layouts with 20 and 30 stations.

Automobile Transportation Logistics Supply Chain Management Strategy

To enhance the management level and quality of the automobile transportation logistics supply chain and promote innovation and development in automobile transportation logistics enterprises,it is essential to strengthen the construction of the automobile transportation logistics supply chain management model.This can be achieved through the gradual improvement of the automobile transportation logistics management process,ensuring that the management of the automobile transportation logistics supply chain proceeds in an orderly manner.The aim is to improve automobile transportation and logistics service levels while meeting the changing market supply needs.This will enable automobile transportation and logistics enterprises to maintain steady economic benefits and enhance their core competitiveness in the market.Therefore,this paper has conducted a comprehensive exploration and research on managing the automobile transportation logistics supply chain.Corresponding management strategies are proposed as a starting point to achieve the aforementioned goals.

Design and Application of Intelligent Control System for Molten Iron Transportation Based on 5G Technology

Molten transport is an important link in the iron and steel enterprise production,involves many complex factors,artificial management is difficult.Therefore,puts forward a kind of molten iron transport wisdom control system based on 5G technology,which mainly contains the intelligent identification tracking system,equipment status collection information acquisition system,locomotive vehicle terminal system,etc.Combined with the analysis of the actual application situation,the system could integrate all the processes and elements of molten iron produc-tion and transportation,realize the integration of operation and management,and also promote the improvement of the turnover efficiency of molten iron tank,reduce the demand for personnel,and reduce the labor cost.

Combinations of Transportation Policies to Promote BRT Usage Using Artificial Society Model

Various transportation systems have been developed in recent years.In this study,an artificial society model is developed to examine the combination of transportation policies in urban areas.In this model,each trip maker selects the primary and terminal transportation modes.An artificial society model is applied to the southeastern region of Osaka City,Japan.The effects of introducing BRT(bus rapid transit,primary transportation)and on-demand buses(terminal transportation)are investigated.The results confirm that BRT is used by a certain number of users.An increase in the use of BRT will increase the amount of walking,thus resulting in a healthy city.However,on-demand buses are rarely used as terminal transportation.Additionally,the development of bicycle parking stations near BRT stops is shown to be effective in the northern section of the BRT route.

A bi-population immune algorithm for weapon transportation support scheduling problem with pickup and delivery on aircraft carrier deck

The weapon transportation support scheduling problem on aircraft carrier deck is the key to restricting the sortie rate and combat capability of carrier-based aircraft.This paper studies the problem and presents a novel solution architecture.Taking the interference of the carrier-based aircraft deck layout on the weapon transportation route and precedence constraint into consideration,a mixed integer formulation is established to minimize the total objective,which is constituted of makespan,load variance and accumulative transfer time of support unit.Solution approach is developed for the model.Firstly,based on modeling the carrier aircraft parked on deck as convex obstacles,the path library of weapon transportation is constructed through visibility graph and Warshall-Floyd methods.We then propose a bi-population immune algorithm in which a population-based forward/backward scheduling technique,local search schemes and a chaotic catastrophe operator are embedded.Besides,the randomkey solution representation and serial scheduling generation scheme are adopted to conveniently obtain a better solution.The Taguchi method is additionally employed to determine key parameters of the algorithm.Finally,on a set of generated realistic instances,we demonstrate that the proposed algorithm outperforms all compared algorithms designed for similar optimization problems and can significantly improve the efficiency,and that the established model and the bi-population immune algorithm can effectively respond to the weapon support requirements of carrier-based aircraft under different sortie missions.

Potential seismic landslide hazard and engineering effect in the Ya’an-Linzhi section of the Sichuan-Tibet transportation corridor, China

The Sichuan-Tibet transportation corridor is located at the eastern margin of the Qinghai-Tibet Plateau,where the complex topography and geological conditions,developed geo-hazards have severely restricted the planning and construction of major projects.For the long-term prevention and early control of regional seismic landslides,based on analyzing seismic landslide characteristics,the Newmark model was used to carry out the potential seismic landslide hazard assessment with a 50-year beyond probability 10%.The results show that the high seismic landslide hazard is mainly distributed along large active tectonic belts and deep-cut river canyons,and are significantly affected by the active tectonics.The low seismic landslide hazard is mainly distributed in the flat terrain such as the Quaternary basins,broad river valleys,and plateau planation planes.The major east-west linear projects mainly pass through five areas with high seismic landslide hazard:Luding-Kangding section,Yajiang-Xinlong(Yalong river)section,Batang-Baiyu(Jinsha river)section,Basu(Nujiang river)section,and Bomi-Linzhi(eastern Himalaya syntaxis)section.The seismic action of the Bomi-Linzhi section can also induce high-risk geo-hazard chains such as the high-level glacial lake breaks and glacial debris flows.The early prevention of seismic landslides should be strengthened in the areas with high seismic landslide hazard.

Erosion wear at the bend of pipe during tailings slurry transportation:Numerical study considering inlet velocity,particle size and bend angle

Pipeline hydraulic transport is a highly efficient and low energy-consumption method for transporting solids and is commonly used for tailing slurry transport in the mining industry.Erosion wear(EW)remains the main cause of failure in tailings slurry pipeline systems,particularly at bends.EW is a complex phenomenon influenced by numerous factors,but research in this area has been limited.This study performs numerical simulations of slurry transport at the bend by combining computational fluid dynamics and fluid particle tracking using a wear model.Based on the validation of the feasibility of the model,this work focuses on the effects of coupled inlet velocity(IV)ranging from 1.5 to 3.0 m·s^(-1),particle size(PS)ranging from 50 to 650μm,and bend angle(BA)ranging from 45°to 90°on EW at the bend in terms of particle kinetic energy and incidence angle.The results show that the maximum EW rate of the slurry at the bend increases exponentially with IV and PS and first increases and then decreases with the increase in BA with the inflection point at 60°within these parameter ranges.Further comprehensive analysis reveals that the sensitivity level of the three factors to the maximum EW rate is PS>IV>BA,and when IV is 3.0 m/s,PS is 650μm,and BA is 60°,the bend EW is the most severe,and the maximum EW rate is 5.68×10^(-6)kg·m^(-2)·s^(-1).In addition,When PS is below or equal to 450μm,the maximum EW position is mainly at the outlet of the bend.When PS is greater than 450μm,the maximum EW position shifts toward the center of the bend with the increase in BA.Therefore,EW at the bend can be reduced in practice by reducing IV as much as possible and using small particles.

New Approach to Find Initial Basic Feasible Solution (IBFS) for Optimal Solution in Transportation Problem

Minimizing transportation time and getting optimal solutions are always considered as important factors while solving transportation problem. This paper shows a new approach for finding initial basic solution for transportation problem which reduces cost of transportation more than any transportation method such as LCM, northwest, Vogel’s approximation and so on. This method has been illustrated by taking an example;afterwards, it compares basic initial feasible solution with other methods IBF and optimal dictate solutions such as MODI and Steppingstone method.

A Distributed Self-Consistent Control Method for Electric Vehicles to Coordinate Low-Carbon Transportation and Energy

Dear Editor,In this letter, a distributed self-consistent control method to coordinate low-carbon transportation and energy is proposed to address the efficient utilization of regional transportation energy and renewable energy. Specifically, taking into account the coordinated development of transportation, power grids, and renewable energy, transportation energy self-consistent, including instant self-consistent rate and power self-consistent rate。

How Generative Adversarial Networks Promote the Development of Intelligent Transportation Systems:A Survey

In current years,the improvement of deep learning has brought about tremendous changes:As a type of unsupervised deep learning algorithm,generative adversarial networks(GANs)have been widely employed in various fields including transportation.This paper reviews the development of GANs and their applications in the transportation domain.Specifically,many adopted GAN variants for autonomous driving are classified and demonstrated according to data generation,video trajectory prediction,and security of detection.To introduce GANs to traffic research,this review summarizes the related techniques for spatio-temporal,sparse data completion,and time-series data evaluation.GAN-based traffic anomaly inspections such as infrastructure detection and status monitoring are also assessed.Moreover,to promote further development of GANs in intelligent transportation systems(ITSs),challenges and noteworthy research directions on this topic are provided.In general,this survey summarizes 130 GAN-related references and provides comprehensive knowledge for scholars who desire to adopt GANs in their scientific works,especially transportation-related tasks.

Exploring the Multi-Layer Structural Properties of the Bus-Subway Transportation Network of Shanghai

Buses and subways are essential to urban public transportation systems and an important engine for activating high-quality urban development. Traditional multi-modal transportation networks focus on the structural feature mining of single-layer networks or each layer, ignoring the structural association of multi-layer networks. In this paper, we examined the multi-layer structural property of the bus-subway network of Shanghai at both global and nodal scales. A dual-layer model of the city’s bus and subway system was built. Single-layer complex network indicators were also extended. The paper also explored the spatial coupling properties of the city’s bus and subway system and identified its primary traffic nodes. It was found that 1) the dual-layer network increased the network’s connectivity to a certain extent and broke through the spatial limitation in terms of physical structure, making the connection between any two locations more direct. 2) The dual-layer network changed the topological characteristics of the transit network, increasing the centrality value and bit order in degree centrality, betweenness centrality, and closeness centrality to different degrees, and making each centrality tend to converge to the city center in spatial distribution. Enhancing the management of critical network nodes would help the integrated public transportation system operate more effectively and provide higher-quality services.

TRANSPORTATION COST-INFORMATION INEQUALITY FOR A STOCHASTIC HEAT EQUATION DRIVEN BY FRACTIONAL-COLORED NOISE

In this paper,we prove Talagrand’s T2 transportation cost-information inequality for the law of stochastic heat equation driven by Gaussian noise,which is fractional for a time variable with the Hurst index H∈(1/2,1),and is correlated for the spatial variable.The Girsanov theorem for fractional-colored Gaussian noise plays an important role in the proof.

Carbon emissions reduction potentiality for railroad transportation based on life cycle assessment

This study addresses the comparative carbon emissions of different transportation modes within a unified evaluation framework,focusing on their carbon footprints from inception to disposal.Specifically,the entire life cycle carbon emissions of High-Speed Rail(HSR),battery electric vehicles,conventional internal combustion engine vehicles,battery electric buses,and conventional internal combustion engine buses are analyzed.The life cycle is segmented into vehicle manufacturing,fuel or electricity production,operational,and dismantlingrecycling stages.This analysis is applied to the Beijing-Tianjin intercity transportation system to explore emission reduction strategies.Results indicate that HSR demonstrates significant carbon emission reduction,with an intensity of only 24%-32% compared to private vehicles and 47%-89% compared to buses.Notably,HSR travel for Beijing-Tianjin intercity emits only 24% of private vehicle emissions,demonstrating the emission reduction benefits of transportation structure optimization.Additionally,predictive modeling reveals the potential for carbon emission reduction through energy structure optimization,providing a guideline for the development of effective transportation management systems.