Research on the attribution evaluating methods of dynamic effects of various parameter uncertainties on the in-structure floor response spectra of nuclear power plant

： Consideration of the dynamic effects of the site and structural parameter uncertainty is required by the standards for nuclear power plants （NPPs） in most countries. The anti-seismic standards provide two basic methods to analyze parameter uncertainty. Directly manually dealing with the calculated floor response spectra （FRS） values of deterministic approaches is the first method. The second method is to perform probability statistical analysis of the FRS results on the basis of the Monte Carlo method. The two methods can only reflect the overall effects of the uncertain parameters, and the results cannot be screened for a certain parameter＇s influence and contribution. In this study, based on the dynamic analyses of the floor response spectra of NPPs, a comprehensive index of the assessed impact for various uncertain parameters is presented and recommended, including the correlation coefficient, the regression slope coefficient and Tornado swing. To compensate for the lack of guidance in the NPP seismic standards, the proposed method can effectively be used to evaluate the contributions of various parameters from the aspects ＆sensitivity, acuity and statistical swing correlations. Finally, examples are provided to verify the set of indicators from systematic and intuitive perspectives, such as the uncertainty of the impact of the structure parameters and the contribution to the FRS of NPPs. The index is sensitive to different types of parameters, which provides a new technique for evaluating the anti-seismic parameters required for NPPs.

INFLUENCE OF UNCERTAINTY OF ROCK PROPERTIES ON SEISMIC RESPONSES OF REACTOR BUILDINGS

The influence of the dispersion and uncertainty of the dynamic shear wave velocity and Poisson＇s ratio of soil in a hard rock site was investigated on the seismic response of reactor building structure. The analysis is performed by considering the soil-structure interaction effects and based on the model of the reactor building in a typical pressurized water reactor nuclear power plant （NPP）. The numerical results show that for the typical floor selected, while the relative increment ratio of the dynamic shear wave velocity varies from -30% to 30% compared to the basis of 1 930 m/s, the relative variation of the horizontal response spectra peak value lies in the scope of ±10% for the internal structure, and the relative variation of the frequency corresponding to the spectra peak is 0.0% in most cases. The relative variation of the vertical response spectra peak value lies in the scope of - 10% to 22%, and the relative variation of the frequency corresponding to the Spectra peak lies in the scope of - 22% to 4%. The analysis indicates that the dynamic shear wave velocity and the Poisson＇s ratio of the rock would affect the seismic response of structure and the soil-structure interaction effects should be considered in seismic analysis and design of NPP even for a hard rock site.

Seismic force demands on acceleration-sensitive nonstructural components:a state-of-the-art review

Nonstructural components(NSCs)are parts,elements,and subsystems that are not part of the primary loadbearing system of building structures but are subject to seismic loading.Damage to NSCs may disrupt the functionality of buildings and result in significant economic losses,injuries,and casualties.In past decades,extensive studies have been conducted on the seismic performance and seismic design methods of NSCs.As the input for the seismic design of NSCs,floor response spectra(FRS)have attracted the attention of researchers worldwide.This paper presents a state-of-the-art review of FRS.Different methods for generating FRS are summarized and compared with those in current seismic design codes.A detailed review of the parameters influencing the FRS is presented.These parameters include the characteristics of ground motion excitation,supporting building and NSCs.The floor acceleration response and the FRS obtained from experimental studies and field observations during earthquakes are also discussed.Three RC frames are used in a case study to compare the peak floor acceleration(PFA)and FRS calculated from time history analyses(THA)with that generated using current seismic design codes and different methods in the literature.Major knowledge gaps are identified,including uncertainties associated with developing FRS,FRS generation methods for different types of buildings,the need for comprehensive studies on absolute acceleration,relative velocity,and relative displacement FRS,and the calibration of FRS by field observations during earthquakes.