Selective Area Growth and Characterization of GaN Nanorods Fabricated by Adjusting the Hydrogen Flow Rate and Growth Temperature with Metal Organic Chemical Vapor Deposition

CaN nanorods are successfully fabricated by adjusting the flow rate ratio of hydrogen （H2）/nitrogen （N2） and growth temperature of the selective area growth （SAG） method with metal organic chemical vapor deposition （MOCVD）. The SAG template is obtained by nanospherical-lens photolithography. It is found that increasing the flow rate of 1-12 will change the CaN crystal shape from pyramid to vertical rod, while increasing the growth temperature will reduce the diameters of GaN rods to nanometer scale. Finally the CaN nanorods with smooth lateral surface and relatively good quality are obtained under the condition that the H2：N2 ratio is 1：1 and the growth temperature is 1030℃. The good crystal quality and orientation of GaN nanorods are confirmed by high resolution transmission electron microscopy. The cathodoluminescence spectrum suggests that the crystal and optical quality is also improved with increasing the temperature.

Numerical Simulation of Oil and Gas Two-Phase Flow in Deep Condensate Gas Reservoirs in Bohai Buried Hills

The BZ19-6 gas field is characterized by high temperature and high pressure (HTHP), high condensate content, little difference between the formation pressure and dew point pressure, and large amount of reverse condensate liquid. During the early stage of depletion development, the production gas-oil ratio (GOR) and production capacity remain relatively stable, which is inconsistent with the conventional reverse condensate seepage law. In view of the static and dynamic conflict in development and production, indoor high-temperature and high-pressure PVT experiment was carried out to reveal the mist-like condensation phenomenon of fluids in the BZ19-6 formation. And the seepage characteristics of condensate gas reservoirs with various degrees of depletion under the condition of HTHP were analyzed based on production performance. The change rule of fluid phase state was analyzed in response to the characterization difficulties of the seepage mechanism. The fluid state was described using the miscible mechanism. And the interphase permeability interpolation coefficient was introduced based on interfacial tension. By doing so, the accurate characterization of the “single-phase flow of condensate gas-near-miscible mist-like quasi single-phase flow-oil-gas two-phase flow” during the development process was achieved. Then the accurate fitting of key indicators for oilfield development was completed, and the distribution law of formation pressure and the law of condensate oil precipitation under different reservoir conditions are obtained. Based on research results, the regulation strategy of variable flow rate production was developed. Currently, the work system has been optimized for 11 wells, achieving a “zero increase” in the GOS of the gas field and an annual oil increase of 22,000 cubic meters.

Experimental study on flow characteristics of tetrahydrofuran hydrate slurry in pipelines

Tetrahydrofuran（THF） was selected as the substitute to study the flow behaviors and the mechanism of the hydrates blockage in pipelines.The slurrylike hydrates and slushlike hydrates are observed with the formation of hydrates in pipeline.There is a critical hydrate volume concentration of 50.6% for THF slurries and pipeline will be free of hydrate blockage while the hydrate volume concentration is lower than the critical volume concentration;otherwise,pipeline will be easy to be blocked.Fully turbulent flow occurs and friction factors tend to be constant when the velocity reaches 1.5 m/s.And then,constant values of friction factors that depend on the volume concentrations in the slurry were regressed to estimate the pressure drops of THF hydrate slurry at large mean velocity.Finally,a safe region,defined according to the critical hydrate volume concentration,was proposed for THF hydrate slurry,which may provide some insight for further studying the natural gas hydrate slurries and judge whether the pipeline can be run safely or not.

FLUID FLOW SEPARATION CHARACTER ON NOVEL HYBRID JOURNAL BEARING

The influence of the structure and running parameters of a novel spiral oil wedge hybrid journal bearing on the fluid flow trace is investigated. The governing equation of the flow trace of lubricant is set up, and the simulation is carried out by using finite difference method. The results show that the lubricant flow status and end leakage quantity are greatly influenced by spiral angle,and that the rotating speed has little influence on the flow status. With advisable geometry design, the separation of lubricant between different oil wedges can be obtained, which can decrease the temperature rise effectively.

Flow properties of fine powders in powder coating

Three types of nanoparticles and their combinations were blended into a fine powder, which has been used in the powder coating industry. To study their effects on flow properties, the modified powder samples were characterized using a variety of techniques that tested the powder under different powder states ranging from dynamic to static. It was found that all three nanoparticles improved the flow properties of the powder to some degree, though the amounts of the nanoparticles needed were different depending on their physical properties. Secondly, inconsistency among these powder characterization techniques was also found. This is attributed to the different states of the powder samples during a measurement including dynamic, dynamic-static and static states. It was confirmed that characterization techniques which test the flow properties of a powder under all three states are needed to fully describe the flow properties of the powder. Finally, the effects of combinations of nanoparticles were explored, and it was found that combinations of nanoparticles can intensify, weaken or combine the effects of their component nanoparticles. The effects of nanoparticle combinations are not a simple summation of the effects of their comnonent nanoparticles.

A Character Flow Framework for Multi-Oriented Scene Text Detection

Scene text detection plays a significant role in various applications,such as object recognition,document management,and visual navigation.The instance segmentation based method has been mostly used in existing research due to its advantages in dealing with multi-oriented texts.However,a large number of non-text pixels exist in the labels during the model training,leading to text mis-segmentation.In this paper,we propose a novel multi-oriented scene text detection framework,which includes two main modules:character instance segmentation(one instance corresponds to one character),and character flow construction(one character flow corresponds to one word).We use feature pyramid network(FPN)to predict character and non-character instances with arbitrary directions.A joint network of FPN and bidirectional long short-term memory(BLSTM)is developed to explore the context information among isolated characters,which are finally grouped into character flows.Extensive experiments are conducted on ICDAR2013,ICDAR2015,MSRA-TD500 and MLT datasets to demonstrate the effectiveness of our approach.The F-measures are 92.62%,88.02%,83.69%and 77.81%,respectively.

Quantifying and sorting of gold nanoparticle dimers from complex reaction mixtures using flow cytometry

The formation, characterization, and purification of well-defined stoichiometric clusters of metallic nanoparticles, particularly in the form of dimers or trimers, are important and formidable challenges in nanoscience. Here we show that flow cytometry can be used as a high-throughput method to determine the relative distribution of oligomeric clusters of molecularly linked gold nano- particles in bulk solution at the single-particle level with good statistics. This unique information would be near impossible to obtain using traditional characterization techniques. The flow cytometric approach is utilized to provide fast feedback for the synthesis optimization of the complex reaction between citrate-stabilized gold nanoparticles and bi-functional molecular wires with dithiocarbamate anchoring groups. Finally, we demonstrate that flow cytometry can be used to significantly increase the proportion of AuNP dimers from an oligomer-rich polydisperse sample by size-selective sorting.