Experimental investigation on flow modes of electrospinning

Electrospinning experiments are performed by using a set of experimental apparatus, a stroboscopic system is adopted for capturing instantaneous images of the cone- jet configuration. The cone and the jet of aqueous solutions of polyethylene oxide （PEO） are formed from an orifice of a capillary tube under the electric field. The viscoelastic con- stitutive relationship of the PEO solution is measured and discussed. The phenomena owing to the jet instability are described, five flow modes and corresponding structures are obtained with variations of the fluid flow rate Q, the electric potential U and the distance h from the orifice of the cap- illary tube to the collector. The flow modes of the cone-jet configuration involves the steady bending mode, the rotat- ing bending mode, the swinging rotating mode, the blurring bending mode and the branching mode. Regimes in the Q-U plane of the flow modes are also obtained. These results may provide the fundamentals to predict the operating conditions expected in practical applications.

Excitation of Zonal Flows by ion-temperature-gradient Modes Excited by the Fluid Resonance

We apply the reductive perturbation method to the simple electrostatic ion-temperature-gradient mode in an advanced fluid description. The fluid resonance turns out to play a major role for the excitation of zonal flows. This is the mechanism recently found to lead to the low-to-high （L-H） mode transition and to the nonlinear Dimits upshift in transport code simulations. It is important that we have taken the nonlinear temperature dynamics from the Reynolds stress as the convected diamagnetic flow. This has turned out to be the most relevant effect as found in transport simulations of the L-H transition, internal transport barriers and Dimits shift. This is the first time that an analytical method is applied to a system which numerically has been found to give the right experimental dynamics.

Formaldehyde degradation by UV/TiO_2/O_3 process using continuous flow mode

The degradation of formaldehyde gas was studied using UV/TiO2/O3 process under the condition of continuous flow mode. The effects of humidity, initial formaldehyde concentration, residence time and ozone adding amount on degradation of formaldehyde gas were investigated. The experimental results indicated that the combination of ozonation with photocatalytic oxidation on the degradation of formaldehyde showed a synergetic action, e.g,, it could considerably increase decomposing of formaldehyde. The degradation efficiency of formaldehyde was between 73.6% and 79.4% while the initial concentration in the range of 1.84--24 mg/m^3 by O3/TiO2flJV process. The optimal humidity was about 50% in UV/TiO2/O3 processs and degradation of formaldehyde increases from 39.0% to 94.1% when the ozone content increased from 0 to 141 mg/m^3. Furthermore, the kinetics of formaldehyde degradation reaction could be described by Langmuir-Hinshelwood model. The rate constant k of 46.72 mg/（m^3.min） and Langmuir adsorption coefficient K of 0.0268 m^3/mg were obtained.

Video-based measurement and data analysis of traffic flow on urban expressways

A new video-based measurement is proposed to collect and investigate traffic flow parameters. The output of the measurement is velocity-headway distance data pairs. Because density can be directly acquired by the reciprocal of headway distance, the data pairs have the advantage of better simultaneity than those from common detectors. By now, over 33 000 pairs of data have been collected from two road sections in the cities of Shanghai and Zhengzhou. Through analyzing the video files recording traffic movements on urban expressways, the following issues are studied：laws of vehicle velocity changing with headway distance, proportions of di0erent driving behaviors in the traffic system, and characteristics of traffic flow in snowy days. The results show that the real road traffic is very complex, and factors such as location and climate need to be taken into consideration in the formation of traffic flow models.

INSTABILITY OF HAGEN-POISEUILLE FLOW FOR NON-AXISYMMETRIC MODE

An investigation is described for instability problem of flow through a pipe of circular cross section. As a disturbance motion, we consider a general non-axisym-metric mode. An associated amplitude or modulation equation has been derived for this disturbance motion. This equation belongs to a diffusion type.The coefficient of it can be negative while Reynolds number increases, because of the complex interaction between molecular diffusion and convection. The negative diffusivity, when it occurs, causes a concentration and focussing of energy within decaying slugs, acting as a role of reversing natural decays.

Key theoretical and technical issues and countermeasures for effective development of Gulong shale oil, Daqing Oilfield, NE China

Aiming at the four issues of underground storage state,exploitation mechanism,crude oil flow and efficient recovery,the key theoretical and technical issues and countermeasures for effective development of Gulong shale oil are put forward.Through key exploration and research on fluid occurrence,fluid phase change,exploitation mechanism,oil start-up mechanism,flow regime/pattern,exploitation mode and enhanced oil recovery(EOR)of shale reservoirs with different storage spaces,multi-scale occurrence states of shale oil and phase behavior of fluid in nano confined space were provided,the multi-phase,multi-scale flow mode and production mechanism with hydraulic fracture-shale bedding fracture-matrix infiltration as the core was clarified,and a multi-scale flow mathematical model and recoverable reserves evaluation method were preliminarily established.The feasibility of development mode with early energy replenishment and recovery factor of 3o%was discussed.Based on these,the researches of key theories and technologies for effective development of Gulong shale oil are proposed to focus on:(1)in-situ sampling and non-destructive testing of core and fluid;(2)high-temperature,high-pressure,nano-scale laboratory simulation experiment;(3)fusion of multi-scale multi-flow regime numerical simulation technology and large-scale application software;(4)waterless(CO_(2))fracturing technique and the fracturing technique for increasing the vertical fracture height;(5)early energy replenishment to enhance oil recovery;(6)lifecycle technical and economic evaluation.Moreover,a series of exploitation tests should be performed on site as soon as possible to verify the theoretical understanding,optimize the exploitation mode,form supporting technologies,and provide a generalizable development model,thereby supporting and guiding the effective development and production of Gulong shale oil.

A Numerical Study of the TipWake of aWind Turbine Impeller Using Extended Proper Orthogonal Decomposition

The behavior of the tip wake of a wind turbine is one of the hot issues in the wind power field.This problem can partially be tackled using Computational Fluid Dynamics(CFD).However,this approach lacks the ability to provide insights into the spatial structure of important high-order flows.Therefore,with the horizontal axis wind turbine as the main focus,in this work,firstly,we conduct CFD simulations of the wind turbine in order to obtain a data-driven basis relating to multiple working conditions for further analysis.Then,these data are studied using an extended Proper Orthogonal Decomposition(POD)algorithm.The quantitative results indicate that the tip vortex in the wake has a complicated spatio-temporal morphological configuration in the higher-order extended POD space.The radial velocity modes obtained are effective and credible,and such reconstructed flow of the tip vortex becomes clearer with the increase of the reconstruction orders.Interestingly,the changes of relatively high-order correlation coefficients are essentially affected by the periodic fusion of tip and central eddies in the wake.

Predicting the mode of flow in pneumatic conveying systems—A review

An initial prediction of the particulate mode of flow in pneumatic conveying systems is beneficial as this knowledge can provide clearer direction to the pneumatic conveying design process. There are three general categories of modes of flow, two dense flows： fluidised dense phase and plug flow, and dilute phase oniy. Detailed in this paper is a review of the commonly used and available techniques for predicting mode of flow. Two types of predictive charts were defined： basic particle parameter based （e.g. particle size and density） and air-particle parameter based （e.g. permeability and de-aeration）. The basic particle techniques were found to have strong and weak areas of predictive ability, on the basis of a comparison with data from materials with known mode of flow capability. It was found that there was only slight improvement in predictive ability when the particle density was replaced by loose-poured bulk density in the basic parameter techniques. The air-particle-parameter-based techniques also showed well-defined regions for mode of flow prediction though the data set used was smaller than that for the basic techniques. Also, it was found to be difficult to utilise de-aeration values from different researchers and subsequently, an air-particle-based technique was developed which does not require any de-aeration parameter in its assessment.

Simulation of mass balance behavior in a large-scale circulating fluidized bed reactor

We determine using a compound model the influence of the mass of granular matter on the behavior of a supercritical circulating fluidized bed （CFB） reactor. Population balance enables a stationary-regime modeling of the mass flow of granular matter inside a CFB unit in a large-scale. The simulation includes some important dynamic processes of gas-particle flows in fluidized bed such as attrition, fragmenta- tion, elutriation, and fuel combustion. Numerical calculations with full boiler loading were performed of operational parameters such as furnace temperature, furnace pressure, feeding materials mass flows, and excess air ratio. Furthermore, three bed inventory masses were adopted as experimental variables in the simulation model of mass balance. This approach enables a sensitivity study of mass flows of granular matter inside a CFB facility. Some computational results from this population balance model obtained for a supercritical CFB reactor are presented that show consistency with the operational data for large-scale CFB units.