Effects of the flow pattern of intertubular liquid film on mass and heat transfer synergies in a falling-film dehumidification system with horizontal pipes are studied.A flow model of the dehumidifying solution betwee...Effects of the flow pattern of intertubular liquid film on mass and heat transfer synergies in a falling-film dehumidification system with horizontal pipes are studied.A flow model of the dehumidifying solution between horizontal pipes is established using Fluent software,the rule of transitions of the flow pattern between pipes is studied,critical Reynolds numbers of flow pattern transitions are obtained,and the accuracy of the model is verified by experiments.The mass transfer synergy angle and heat transfer synergy angle are respectively used as evaluation criteria for the mass transfer synergy and heat transfer synergy,and distribution laws of the synergy angles for droplet,droplet columnar and curtain flow patterns are obtained.Simulation results show that the mass transfer synergy angles corresponding to droplet,droplet columnar and curtain flow patterns all rise to a plateau with time.The mean mass-transfer synergy angle is 98°for the droplet flow pattern,higher than 96.5°for the droplet columnar flow pattern and 95°for the curtain flow pattern.The results show that the mass transfer synergy of the droplet flow pattern is better than that of the droplet columnar flow pattern and that of the curtain flow pattern.展开更多
Well completions are generally used to connect a reservoir to the surface so that fluids can be produced from orinjected into it. With these systems, pipe flows are typically established in the horizontal sections of ...Well completions are generally used to connect a reservoir to the surface so that fluids can be produced from orinjected into it. With these systems, pipe flows are typically established in the horizontal sections of slotted screencompletions and inflow control device (ICD) completions;moreover, an annular flow exists in the region betweenthe pipe and the borehole wall. On the basis of the principles of mass and momentum conservation, in the presentstudy, a coupling model considering the variable mass flow of the central tubing, the variable mass flow of theannular tubing and the reservoir seepage is implemented to simulate the wellbore–annulus–reservoir behaviorin the horizontal section of slotted-screen and ICD completions. In earlier models, only the central tubing variablemass flow and reservoir seepage flow were considered. The present results show that the closer the heel end, thegreater is the flow per unit length in the central tubing from the annulus. When external casing packers are notconsidered, the predicted production rate of the slotted screen completion, which is obtained using the variablemass flow model not taking into account the annulus flow, is 9.51% higher than the rate obtained using the (complete) model with annulus flow. In addition, the incomplete model forecasts the production of ICD completion ata 70.98% higher rate. Both models show that the pressure profile and flow profile of the borehole wall are relatively uniform in the wellbore–annulus–reservoir in horizontal wells.展开更多
The purpose of this paper is to understand the mechanism of non-axisymmetric wall-thinning that caused a pipe break in the pipeline of the Mihama nuclear power plant in 2004. The wall thinning was caused by the flow a...The purpose of this paper is to understand the mechanism of non-axisymmetric wall-thinning that caused a pipe break in the pipeline of the Mihama nuclear power plant in 2004. The wall thinning was caused by the flow accelerated corrosion which affects low carbon steel pipelines. The mass transfer rate measurement of the wall thinning behind an office in a curved swirling flow is carried out in a closed-circuit water tunnel using a benzoic acid dissolution method. The experimental results indicate that the high mass transfer rate is observed on one side of the pipe behind the orifice, which is similar to the observation of the wall-thinning rate in the Mihama case. This result suggests that the influence of the secondary flow in the long elbow combined with the swirling flow can produce the non-axisymmetric mass transfer phenomenon behind the orifice.展开更多
Corrosion products of structural materials when contained in water usually are in two states:soluble state and colloidal particles with diameter about 10^(-3)—10^(-1)μm.Deposits of such corrosion products on tube su...Corrosion products of structural materials when contained in water usually are in two states:soluble state and colloidal particles with diameter about 10^(-3)—10^(-1)μm.Deposits of such corrosion products on tube surfaces under high pressure will jeopardize the operating economy of power plant equipment and even result in accidents. A numerical study is reported in this paper of the natural convective heat and mass transfer on a vertical heated plate subject to the first or mixed kind of boundary conditions for high-pressure water(P=17MPa)containing metal corrosion products with consideration of variable thermophysical properties.展开更多
The present pagination reports both Brownian diffusion and thermophoresis aspects subject to magneto hydrodynamic Williamson fluid model.Assuming the flow is unsteady and blood is treated as Williamson fluid over a we...The present pagination reports both Brownian diffusion and thermophoresis aspects subject to magneto hydrodynamic Williamson fluid model.Assuming the flow is unsteady and blood is treated as Williamson fluid over a wedge with radiation.The governing equations are transformed into ordinary differential equations by using similarity variables.The analytical solutions of the transformed governing equations are obtained by using the RK 4th order method along with shooting technique solver.The effects of various physical parameters such as Hartmann number,local Weissenberg number,radiation parameter,unsteadiness parameter,Prandtl number,Lewis number,Brownian diffusion,thermophoresis,wedge angle parameter,moving wedge parameter,on velocity,temperature,concentration,skin friction,heat transfer rate and mass transfer rate have been discussed in detail.The velocity and temperature profile deprives for larger We and an opposite trend is observed for concentration.The radiation parameter is propositional to temperature and a counter behaviour is observed for Pr.展开更多
基金Project(2016YFC0700100)supported by the National Key R&D Program of ChinaProject(JDJQ20160103)supported by the Promotion of the Connotation Development Quota Project of Colleges and Universities-Outstanding Youth of Architectural University,China。
文摘Effects of the flow pattern of intertubular liquid film on mass and heat transfer synergies in a falling-film dehumidification system with horizontal pipes are studied.A flow model of the dehumidifying solution between horizontal pipes is established using Fluent software,the rule of transitions of the flow pattern between pipes is studied,critical Reynolds numbers of flow pattern transitions are obtained,and the accuracy of the model is verified by experiments.The mass transfer synergy angle and heat transfer synergy angle are respectively used as evaluation criteria for the mass transfer synergy and heat transfer synergy,and distribution laws of the synergy angles for droplet,droplet columnar and curtain flow patterns are obtained.Simulation results show that the mass transfer synergy angles corresponding to droplet,droplet columnar and curtain flow patterns all rise to a plateau with time.The mean mass-transfer synergy angle is 98°for the droplet flow pattern,higher than 96.5°for the droplet columnar flow pattern and 95°for the curtain flow pattern.The results show that the mass transfer synergy of the droplet flow pattern is better than that of the droplet columnar flow pattern and that of the curtain flow pattern.
基金the Scientific Research and Technological Development Project of CNPC(2019D-4413).
文摘Well completions are generally used to connect a reservoir to the surface so that fluids can be produced from orinjected into it. With these systems, pipe flows are typically established in the horizontal sections of slotted screencompletions and inflow control device (ICD) completions;moreover, an annular flow exists in the region betweenthe pipe and the borehole wall. On the basis of the principles of mass and momentum conservation, in the presentstudy, a coupling model considering the variable mass flow of the central tubing, the variable mass flow of theannular tubing and the reservoir seepage is implemented to simulate the wellbore–annulus–reservoir behaviorin the horizontal section of slotted-screen and ICD completions. In earlier models, only the central tubing variablemass flow and reservoir seepage flow were considered. The present results show that the closer the heel end, thegreater is the flow per unit length in the central tubing from the annulus. When external casing packers are notconsidered, the predicted production rate of the slotted screen completion, which is obtained using the variablemass flow model not taking into account the annulus flow, is 9.51% higher than the rate obtained using the (complete) model with annulus flow. In addition, the incomplete model forecasts the production of ICD completion ata 70.98% higher rate. Both models show that the pressure profile and flow profile of the borehole wall are relatively uniform in the wellbore–annulus–reservoir in horizontal wells.
文摘The purpose of this paper is to understand the mechanism of non-axisymmetric wall-thinning that caused a pipe break in the pipeline of the Mihama nuclear power plant in 2004. The wall thinning was caused by the flow accelerated corrosion which affects low carbon steel pipelines. The mass transfer rate measurement of the wall thinning behind an office in a curved swirling flow is carried out in a closed-circuit water tunnel using a benzoic acid dissolution method. The experimental results indicate that the high mass transfer rate is observed on one side of the pipe behind the orifice, which is similar to the observation of the wall-thinning rate in the Mihama case. This result suggests that the influence of the secondary flow in the long elbow combined with the swirling flow can produce the non-axisymmetric mass transfer phenomenon behind the orifice.
文摘Corrosion products of structural materials when contained in water usually are in two states:soluble state and colloidal particles with diameter about 10^(-3)—10^(-1)μm.Deposits of such corrosion products on tube surfaces under high pressure will jeopardize the operating economy of power plant equipment and even result in accidents. A numerical study is reported in this paper of the natural convective heat and mass transfer on a vertical heated plate subject to the first or mixed kind of boundary conditions for high-pressure water(P=17MPa)containing metal corrosion products with consideration of variable thermophysical properties.
文摘The present pagination reports both Brownian diffusion and thermophoresis aspects subject to magneto hydrodynamic Williamson fluid model.Assuming the flow is unsteady and blood is treated as Williamson fluid over a wedge with radiation.The governing equations are transformed into ordinary differential equations by using similarity variables.The analytical solutions of the transformed governing equations are obtained by using the RK 4th order method along with shooting technique solver.The effects of various physical parameters such as Hartmann number,local Weissenberg number,radiation parameter,unsteadiness parameter,Prandtl number,Lewis number,Brownian diffusion,thermophoresis,wedge angle parameter,moving wedge parameter,on velocity,temperature,concentration,skin friction,heat transfer rate and mass transfer rate have been discussed in detail.The velocity and temperature profile deprives for larger We and an opposite trend is observed for concentration.The radiation parameter is propositional to temperature and a counter behaviour is observed for Pr.
