Based on the similarity theory,a new experimentalmethod named Similar ExperimentalMethod for Durability of Concrete（SEMDC）was established.The existing experimentalmethods for durability of concrete were summarized,a...Based on the similarity theory,a new experimentalmethod named Similar ExperimentalMethod for Durability of Concrete（SEMDC）was established.The existing experimentalmethods for durability of concrete were summarized,and the merits and demerits of these experimentalmethods were analyzed.Major factors affecting the durability of concrete were found through literature review.These factors were analyzed and the similarity criteria were established according to the similarity theory,and then the SEMDC was established according to the rules of these criteria.The various influentialfactors of the experimentalmethod were analyzed and the merits and demerits of this new experimentalmethod were discussed.According to SEMDC,changing the geometry shrinkage ratio was the only way to accelerate the test in order to keep the experiment similar to the reality.There were few other parameters which need to be changed in SEMDC,making the test easy to be achieved.According to SEMDC,time shrinkage ratio was the square of geometric shrinkage ratio,so an appropriate increase of the geometric shrinkage ratio could accelerate the test.Finally,an example of experimentaldesign for durability of concrete was devised theoretically base on SEMDC theory.展开更多
Experiments simulating the effect of coal mine stopping through a fault zone were designed based on a working face of the Qianqiu coal mine in Yima, China. Through simulation of the physical process of fault reactivat...Experiments simulating the effect of coal mine stopping through a fault zone were designed based on a working face of the Qianqiu coal mine in Yima, China. Through simulation of the physical process of fault reactivation and coal bumps, the displacement of the surrounding strata and evolution characteristics of fault stress under the effect of mining were studied. The mechanism of fault reactivation induced by coal mining was analyzed. The results show that shortly before fault reactiva- tion, the normal stress and shear stress increased rapidly and the risk of a fault slip occurring was also increased. The fault reac- tivation, caused by the mining activity, occurred when the working face was 25-35 m from the fault along the hanging wall. The influence of mining increased the possibility of fault reactivation, while the local failure of the bearing capacity of the working face was the direct cause of the fault slip. Our results indicate that the influence of fault slip on the coal of the working face had a transient impact and acted as a loading-unloading function.展开更多
A large number of high-voltage power transmission towers have recently been constructed in mining areas prone to subsidence. In order to ensure the safety of the transmission towers and the safe operation of transmiss...A large number of high-voltage power transmission towers have recently been constructed in mining areas prone to subsidence. In order to ensure the safety of the transmission towers and the safe operation of transmission systems, it is imperative to carry out research on the anti-deformation performance of transmission towers. In our study, we performed experiments on the anti-deformation performance of a transmission tower in a subsidence area on a scale model with a geometric scale ratio of 1:5 and analyzed the failure mechanism of the tower members. The results show that, when the axial distance between two supports changes, destabilization failure most likely occurs in the members of the bottom transverse layer because some parts of the main diagonal member bars yield under the action of compression. The failure mechanism of the tower members basically coincides with the lever principle.展开更多
This study employs similar simulation testing and discrete element simulation coupling to analyze the failure and deformation processes of a model coal seam's roof.The caving area of the overburden rock is divided...This study employs similar simulation testing and discrete element simulation coupling to analyze the failure and deformation processes of a model coal seam's roof.The caving area of the overburden rock is divided into three zones:the delamination fracture zone,broken fracture zone,and compaction zone.The caving and fracture zones'heights are approximately 110 m above the coal seam,with a maximum subsidence of 11 m.The delamination fracture zone's porosity range is between 0.2 and 0.3,while the remainder of the roof predominantly exhibits a porosity of less than 0.1.In addition,the numerical model's stress analysis revealed that the overburden rock's displacement zone forms an'arch-beam'structure starting from 160 m,with the maximum and minimum stress values decreasing as the distance of advancement increases.In the stress beam interval of the overburden rock,the maximum value changes periodically as the advancement distance increases.Based on a comparative analysis between observable data from on-site work and numerical simulation results,the stress data from the numerical simulation are essentially consistent with the actual results detected on-site,indicating the validity of the numerical simulation results.展开更多
基金Funded by the National Natural Science Foundation of China(Nos.50808173 and 51208504)
文摘Based on the similarity theory,a new experimentalmethod named Similar ExperimentalMethod for Durability of Concrete（SEMDC）was established.The existing experimentalmethods for durability of concrete were summarized,and the merits and demerits of these experimentalmethods were analyzed.Major factors affecting the durability of concrete were found through literature review.These factors were analyzed and the similarity criteria were established according to the similarity theory,and then the SEMDC was established according to the rules of these criteria.The various influentialfactors of the experimentalmethod were analyzed and the merits and demerits of this new experimentalmethod were discussed.According to SEMDC,changing the geometry shrinkage ratio was the only way to accelerate the test in order to keep the experiment similar to the reality.There were few other parameters which need to be changed in SEMDC,making the test easy to be achieved.According to SEMDC,time shrinkage ratio was the square of geometric shrinkage ratio,so an appropriate increase of the geometric shrinkage ratio could accelerate the test.Finally,an example of experimentaldesign for durability of concrete was devised theoretically base on SEMDC theory.
基金Supported by the Major State Basic Research Development Program Fund （2010CB226801） the National Natural Science Foundation of China （50704034） the State Key Laboratory of Coal Resources and Safe Mining Open Research Fund （SKLCRSM11KFB08）
文摘Experiments simulating the effect of coal mine stopping through a fault zone were designed based on a working face of the Qianqiu coal mine in Yima, China. Through simulation of the physical process of fault reactivation and coal bumps, the displacement of the surrounding strata and evolution characteristics of fault stress under the effect of mining were studied. The mechanism of fault reactivation induced by coal mining was analyzed. The results show that shortly before fault reactiva- tion, the normal stress and shear stress increased rapidly and the risk of a fault slip occurring was also increased. The fault reac- tivation, caused by the mining activity, occurred when the working face was 25-35 m from the fault along the hanging wall. The influence of mining increased the possibility of fault reactivation, while the local failure of the bearing capacity of the working face was the direct cause of the fault slip. Our results indicate that the influence of fault slip on the coal of the working face had a transient impact and acted as a loading-unloading function.
基金the National Natural Science Foundation of China (No. 50004008)the Science Fund of China University of Mining and Technology (No. OB061045)
文摘A large number of high-voltage power transmission towers have recently been constructed in mining areas prone to subsidence. In order to ensure the safety of the transmission towers and the safe operation of transmission systems, it is imperative to carry out research on the anti-deformation performance of transmission towers. In our study, we performed experiments on the anti-deformation performance of a transmission tower in a subsidence area on a scale model with a geometric scale ratio of 1:5 and analyzed the failure mechanism of the tower members. The results show that, when the axial distance between two supports changes, destabilization failure most likely occurs in the members of the bottom transverse layer because some parts of the main diagonal member bars yield under the action of compression. The failure mechanism of the tower members basically coincides with the lever principle.
基金National Key R&D Program of China(2023YFC3009100,2023YFC3009102)National Natural Science Foundation of China(52304198)Open Fund of the National and Local Joint Engineering Research Center for Safe and Accurate Coal Mining(EC2021016).
文摘This study employs similar simulation testing and discrete element simulation coupling to analyze the failure and deformation processes of a model coal seam's roof.The caving area of the overburden rock is divided into three zones:the delamination fracture zone,broken fracture zone,and compaction zone.The caving and fracture zones'heights are approximately 110 m above the coal seam,with a maximum subsidence of 11 m.The delamination fracture zone's porosity range is between 0.2 and 0.3,while the remainder of the roof predominantly exhibits a porosity of less than 0.1.In addition,the numerical model's stress analysis revealed that the overburden rock's displacement zone forms an'arch-beam'structure starting from 160 m,with the maximum and minimum stress values decreasing as the distance of advancement increases.In the stress beam interval of the overburden rock,the maximum value changes periodically as the advancement distance increases.Based on a comparative analysis between observable data from on-site work and numerical simulation results,the stress data from the numerical simulation are essentially consistent with the actual results detected on-site,indicating the validity of the numerical simulation results.
