FITTING CORRECTION METHOD OF RING ARTIFACTS FOR RECONSTRUCTING CONE-BEAM CT IMAGES

In high-resolution cone-beam computed tomography （CBCT） using the flat-panel detector, imperfect or defect detector elements cause ring artifacts due to the none-uniformity of their X-ray response. They often disturb the image quality. A dedicated fitting correction method for high-resolution micro-CT is presented. The method converts each elementary X-ray response curve to an average one, and eliminates response inconsistency among pixels. Other factors of the method are discussed, such as the correction factor variability by different sampling frames and nonlinear factors over the whole spectrum. Results show that the noise and artifacts are both reduced in reconstructed images

LEAST-SQUARES METHOD-BASED FEATURE FITTING AND EXTRACTION IN REVERSE ENGINEERING

The main purpose of reverse engineering is to convert discrete data pointsinto piecewise smooth, continuous surface models. Before carrying out model reconstruction it issignificant to extract geometric features because the quality of modeling greatly depends on therepresentation of features. Some fitting techniques of natural quadric surfaces with least-squaresmethod are described. And these techniques can be directly used to extract quadric surfaces featuresduring the process of segmentation for point cloud.

Solving single-frequency phase ambiguity using parameter weights fitting and constrained equation ambiguity resolution methods

Based on the structural characteristics of the double-differenced normal equation, a new method was proposed to resolve the ambiguity float solution through a selection of parameter weights to construct an appropriate regularized matrix, and a singular decomposition method was used to generate regularization parameters. Numerical test results suggest that the regularized ambiguity float solution is more stable and reliable than the least-squares float solution. The mean square error matrix of the new method possesses a lower correlation than the variancecovariance matrix of the least-squares estimation. The size of the ambiguity search space is reduced and the search efficiency is improved. The success rate of the integer ambiguity searching process is improved significantly when the ambiguity resolution by using constraint equation method is used to determine the correct ambiguity integervector. The ambiguity resolution by using constraint equation method requires an initial input of the ambiguity float solution candidates which are obtained from the LAMBDA method in the new method. In addition, the observation time required to fix reliable integer ambiguities can he significantly reduced.

Multiple Suppression Using T-A Dual Polynomial Fitting Method

Principles of polynomial fitting zero offset profile are introduced, and a new polynomial fitting method, tbe time-amplitude dual fitting method, is developed. The method can be used to purify seismic waves and suppress multiples. The effect of suppressing multiples is compared with other multiple suppression methods.

Fitting method of pseudo-polynomial for solving nonlinear parametric adjustment

The optimal condition and its geometrical characters of the least square adjustment were proposed. Then the relation between the transformed surface and least squares was discussed. Based on the above, a non iterative method, called the fitting method of pseudo polynomial, was derived in detail. The final least squares solution can be determined with sufficient accuracy in a single step and is not attained by moving the initial point in the view of iteration. The accuracy of the solution relys wholly on the frequency of Taylor’s series. The example verifies the correctness and validness of the method. [

Estimation of mass transfer coefficient in ozone absorption by linear least square fitting and Simplex search methods

For physical ozone absorption without reaction,two parametric estimation methods,i.e.the common linear least square fitting and non-linear Simplex search methods,were applied,respectively,to determine the ozone mass transfer coefficient during absorption and both methods give almost the same mass transfer coefficient.While for chemical absorption with ozone decomposition reaction,the common linear least square fitting method is not applicable for the evaluation of ozone mass transfer coefficient due to the difficulty of model linearization for describing ozone concentration dissolved in water.The nonlinear Simplex method obtains the mass transfer coefficient by minimizing the sum of the differences between the simulated and experimental ozone concentration during the whole absorption process,without the limitation of linear relationship between the dissolved ozone concentration and absorption time during the initial stage of absorption.Comparison of the ozone concentration profiles between the simulation and experimental data demonstrates that Simplex method may determine ozone mass transfer coefficient during absorption in an accurate and high efficiency way with wide applicability.

Combined Application of Wide-Field Electromagnetic Method and Flow Field Fitting Method for High-Resolution Exploration： A Case Study of the Anjialing No. 1 Coal Mine

The Anjialing No. 1 Coal Mine in Shanxi Province, China, contains a complicated old goaf and an unknown water distribution that hold high potential for serious water hazards. Due to poor detection resolution, previous attempts have failed to determine the scope of the old goal and the water distribution in the mine by separate use of various exploration methods such as seismic method, direct current resistivity, audio magnetotellurics, controlled-source audio-frequency magnetotellurics, and transient electromag-netics. To solve this difficult problem, a combination of the wide-field electromagnetic method and the flow field fitting method with three-dimensional resistivity data inversion was applied to determine the precise scope of the goal and the locations where water is present, and to identify the hydraulic con- nection between the water layers so as to provide reliable technical support for safe coal production. Reasonable results were achieved, with all these goals being met. As a result, a mining area of nearly 4 km^2 has been released for operation.

Three-Step Predictor-Corrector of Exponential Fitting Method for Nonlinear Schroedinger Equations

We develop the three-step explicit and implicit schemes of exponential fitting methods. We use the three- step explicit exponential fitting scheme to predict an approximation, then use the three-step implicit exponential fitting scheme to correct this prediction. This combination is called the three-step predictor-corrector of exponential fitting method. The three-step predictor-corrector of exponential fitting method is applied to numerically compute the coupled nonlinear Schroedinger equation and the nonlinear Schroedinger equation with varying coefficients. The numerical results show that the scheme is highly accurate.

Nonlinear Fitting Method of Long-Term Distributions for Statistical Analysis of Extreme Negative Surge Elevations

Hydrologic frequency analysis plays an important role in coastal and ocean engineering for structural design and disaster prevention in coastal areas. This paper proposes a Nonlinear Least Squares Method (NLSM), which estimates the three unknown parameters of the Weibull distribution simultaneously by an iteration method. Statistical test shows that the NLSM fits each data sample well. The effects of different parameter-fitting methods, distribution models, and threshold values are also discussed in the statistical analysis of storm set-down elevation. The best-fitting probability distribution is given and the corresponding return values are estimated for engineering design.

Research on the Model of Linear Data Fitting Method

By using the method of least square linear fitting to analyze data do not exist errors under certain conditions, in order to make the linear data fitting method that can more accurately solve the relationship expression between the volume and quantity in scientific experiments and engineering practice, this article analyzed data error by commonly linear data fitting method, and proposed improved process of the least distance squ^re method based on least squares method. Finally, the paper discussed the advantages and disadvantages through the example analysis of two kinds of linear data fitting method, and given reasonable control conditions for its application.

A Microcomputer Fitted Method for Determination of the True ODF of Hexagonal Materials according to the Maximum-Entropy Estimate

A method which is especially suitable for microcomputer calculation of the true orientation distribution function (ODF) according to the maximum-entropy estimate is proposed for hexagonal system polycrystalline materials with physical symmetry.The resultant computational software system has been also designed and first carried out in a microcomputer PANAFACOM-U1200 being on line with the X-ray diffractometer D/max-3A.The simu- lated calculation shows that the method is concisely pragmatic and easily popularized,while the results obtained are trust worthy.

ADAPTIVE MESHLESS METHOD BASED ON LOCAL FIT TECHNOLOGY

An h-adaptive meshless method is proposed in this paper. The error estimation is based on local fit technology, usually confined to Voronoi Cells. The error is achieved by comparison of the computational results with smoothed ones, which are projected with Taylor series. Voronoi Cells are introduced not only for integration of potential energy but also for guidance of refinement. New nodes are placed within those cells with high estimated error. At the end of the paper, two numerical examples with severe stress gradient are analyzed. Through adaptive analysis accurate results are obtained at critical subdomains, which validates the efficiency of the method.

Energy-Minimizing Curve Fitting for High-Order Surface Mesh Generation

We investigate different techniques for fitting Bézier curves to surfaces in context of high-order curvilinear mesh generation. Starting from distance-based least-squares fitting we develop an incremental algorithm, which incorporates approximations of stretch and bending energy. In the process, the algorithm reduces the energy weight in favor of accuracy, leading to an optimized set of sampling points. This energy-minimizing fitting strategy is applied to analytically defined as well as triangulated surfaces. The results confirm that the proposed method straightens and shortens the curves efficiently. Moreover the method preserves the accuracy and convergence behavior of distance-based fitting. Preliminary application to surface mesh generation shows a remarkable improvement of patch quality in high curvature regions.

ON CONSTRUCTION OF HIGH ORDER EXPONENTIALLY FITTED METHODS BASED ON PARAMETERIZED RATIONAL APPROXIMATIONS TO exp

By the discussion of the formula and properties of (4,4) parametric form rational approximation to function exp(q), the fourth order derivative one_step exponentially fitted method and the third order derivative hybrid one_step exponentially fitted method are presented, their order p satisfying 6≤p≤8. The necessary and sufficient conditions for the two methods to be A_ stable are given. Finally, for the fourth order derivative method, the error bound and the necessary and sufficient conditions for it to be median are discussed.

Improvement of scattering correction for in situ coastal and inland water absorption measurement using exponential fitting approach

The absorption coefficient of water is an important bio-optical parameter for water optics and water color remote sensing. However, scattering correction is essential to obtain accurate absorption coefficient values in situ using the nine-wavelength absorption and attenuation meter AC9. Establishing the correction always fails in Case 2 water when the correction assumes zero absorption in the near-infrared(NIR) region and underestimates the absorption coefficient in the red region, which affect processes such as semi-analytical remote sensing inversion. In this study, the scattering contribution was evaluated by an exponential fitting approach using AC9 measurements at seven wavelengths(412, 440, 488, 510, 532, 555, and 715 nm) and by applying scattering correction. The correction was applied to representative in situ data of moderately turbid coastal water, highly turbid coastal water, eutrophic inland water, and turbid inland water. The results suggest that the absorption levels in the red and NIR regions are significantly higher than those obtained using standard scattering error correction procedures. Knowledge of the deviation between this method and the commonly used scattering correction methods will facilitate the evaluation of the effect on satellite remote sensing of water constituents and general optical research using different scatteringcorrection methods.

Study on Coal Consumption Curve Fitting of the Thermal Power Based on Genetic Algorithm

Coal consumption curve of the thermal power plant can reflect the function relationship between the coal consumption of unit and load, which plays a key role for research on unit economic operation and load optimal dispatch. Now get coal consumption curve is generally obtained by least square method, but which are static curve and these curves remain unchanged for a long time, and make them are incompatible with the actual operation situation of the unit. Furthermore, coal consumption has the characteristics of typical nonlinear and time varying, sometimes the least square method does not work for nonlinear complex problems. For these problems, a method of coal consumption curve fitting of the thermal power plant units based on genetic algorithm is proposed. The residual analysis method is used for data detection;quadratic function is employed to the objective function;appropriate parameters such as initial population size, crossover rate and mutation rate are set;the unit’s actual coal consumption curves are fitted, and comparing the proposed method with least squares method, the results indicate that fitting effect of the former is better than the latter, and further indicate that the proposed method to do curve fitting can best approximate known data in a certain significance, and they can real-timely reflect the interdependence between power output and coal consumption.

Exponentially-Fitted 2-Step Simpson’s Method for Oscillatory/Periodic Problems

Following a six-step flow chart, exponentially-fitted variant of the 2-step Simpson’s method suitable for solving ordinary differential equations with periodic/oscillatory behaviour is constructed. The qualitative properties of the constructed methods are also investigated. Numerical experiments on standard problems confirming the theoretical expectations regarding the constructed methods compared with other existing standard methods are also presented. Our results unify and improve the existing classical 2-step Simpson’s method.

半变系数模型的Back-Fitting估计

针对半变系数回归模型给出了一种后向拟合方法,该方法可得到模型中常值系数估计量的精确表达式;同时给出了实验设计方法和数值模拟结果,用于验证所提出的估计方法对估计常值系数具有满意的精度和稳定性.

用不同方法评估山西地震台网的监测能力

基于山西数字地震台网2015—2019年记录的地震目录及观测报告数据,采用“基于概率的完整性震级”PMC方法、震级—序号法、最优拟合度(GFT)法和最大曲率法等多种方法分别评估山西地震台网的监测能力。结合山西测震台网的实际情况和不同评估方法的计算原理进行对比分析,结果显示,部分台站围限的区域能监测到M L1.0及以下的地震外,其余区域的监测能力下限为M L1.5;“基于概率的完整性震级”方法更适合用于评估山西地震台网的监测能力。随着预警台网的正式运行,建议采用该方法对地震预警台网的实际监测能力重新评估。

四参数正弦曲线拟合的快速算法

对四参数正弦拟合软件运行时间进行了研究,提出一种软件拟合时间的定量评价方法,对序列长度、序列所含信号周波数、正弦波形幅度、相位、直流分量,以及A/D位数等不同因素条件,给四参数正弦曲线拟合所用时间的影响进行了定量评价,获得了拟合时间随各个因素而变化的规律。针对影响软件运行时间的主要因素,提出了以减少拟合序列长度为手段,进而降低拟合所用时间的快速拟合方法。它们是直接序列截取法和二次抽样法。并在一组实验上验证了所述方法的有效性与可行性,获得了二次抽样法优于直接截取法的明确结论。所述方法可用于四参数正弦拟合的快速运算。