Synthesis of Flower-like NaY（MoO4）2 and Optical Property of NaY（MoO4）2：Eu^3＋

Flower-like NaY（MoO4）2 particles were synthesized through a microwave-assisted hydrother- mal process followed by a subsequent calcination process. The products were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, field-emission scanning electron mi- croscopy. The possible formation mechanism of the flower-like NaY（MoO4）2 precursor was proposed. The NaY（MoO4）2：Eu3＋ phosphors were also prepared and their luminescence properties showed the NaY（MoO4）2：Eu^3＋ materials with the emission peak at 612 nm had potential application as a red phosphor for white light-emitting diodes. Furthermore, the microwave-assisted hydrothermal process followed by a subsequent calcination process could be extended to prepare the other lanthanide molybdates with the flower-like morphology.

Photocatalytic Activity of Hierarchical Flower-Like TiO_(2) Superstructures with Dominant {001} Facets

The fabrication of well defined hierarchical structures of anatase TiO_(2) with a high percentage of reactive facets is of great importance and challenging.Hierarchically flower-like TiO_(2) superstructures(HFTS)self-assembled from anatase TiO_(2) nanosheets with exposed{001}facets(up to 87%)were synthesized by a simple alcohothermal strategy in a HF-H_(2)O-C_(2)H_(5)OH mixed solution using titanate nanotubes as precursor.The samples were characterized by X-ray diffraction,scanning electron microscopy,transmission electron microscopy,and N2 adsorption-desorption isotherms.The photocatalytic activity was evaluated by the photocatalytic oxidation decomposition of acetone in air and methyl orange in aqueous solution under UV illumination.The photocatalytic activity of HFTS was much higher than that of commercial Degussa P25 and tabular-shaped anatase TiO_(2) obtained using pure water as the synthesis medium.The enhancement in photocatalytic activity was related to several factors,including the hierarchically porous structure,exposed{001}facets,and increased light harvesting ability.The HFTS was also of interest for use in solar cells,photocatalytic H_(2) production,optoelectronic devices,sensors,and catalysis.

Superior de/hydrogenation performances of MgH2 catalyzed by 3D flower-like TiO2@C nanostructures

Magnesium hydride has been seen as a potential material for solid state hydrogen storage,but the kinetics and thermodynamics obstacles have hindered its development and application.Three-dimensional flower-like TiO2@C and TiO2 were synthesized as the catalyst for MgH2 system and great catalytic activities are acquired in the hydrogen sorption properties.Experiments also show that the flower-like TiO2@C is superior to flower-like TiO2 in improving the hydrogen storage properties of MgH2.The hydrogen desorption onset and peak temperatures of flower-like TiO2 doped MgH2 is reduced to 199.2℃and 245.4℃,while the primitive MgH2 starts to release hydrogen at 294.6℃and the rapid dehydrogenation temperature is even as high as 362.6℃.The onset and peak temperatures of flower-like TiO2@C doped MgH2 are further reduced to 180.3℃and 233.0℃.The flower-like TiO2@C doped MgH2 composite can release6.0 wt%hydrogen at 250℃within 7 min,and 4.86 wt%hydrogen at 225℃within 60 min,while flowerlike TiO2 doped MgH2 can release 6.0 wt%hydrogen at 250℃within 8 min,and 3.89 wt%hydrogen at225℃within 60 min.Hydrogen absorption kinetics is also improved dramatically.Moreover,compared with primitive MgH2 and the flower-like TiO2 doped MgH2,the activation energy of flower-like TiO2@C doped MgH2 is significantly decreased to 67.10 kJ/mol.All the improvement of hydrogen sorption properties can be ascribed to the flower-like structure and the two-phase coexistence of TiO2 and amorphous carbon.Such phase composition and unique structure are proved to be the critical factor to improve the hydrogen sorption properties of MgH2,which can be considered as the new prospect for improving the kinetics of light-metal hydrogen storage materials.

A highly efficient flower-like cobalt catalyst for electroreduction of carbon dioxide

Electrochemical conversion of CO2 into fuel has been regarded as a promising approach to achieve the global carbon cycle.Herein,we report an efficient cobalt catalyst with a unique flower-like morphology synthesized by a green and facile hydrothermal method,in which n-butylamine is used as the capping agent.The resultant catalyst shows superior electrocatalytic activity toward CO2 electroreduction,which is highly selective for generating formate with a Faraday efficiency of 63.4%.Electrochemical analysis reveals that the oxide on the surface is essential for the electrocatalysis of the CO2 reduction reaction.Cyclic voltammograms further suggest that this catalyst is highly active for the oxidation of reduced product,and can thus be seen as a bifunctional catalyst.

3D flower-like heterostructured TiO_2@Ni(OH)_2 microspheres for solar photocatalytic hydrogen production

TiO2@Ni(OH)2 core-shell microspheres were synthesized by a facile strategy to obtain a perfect 3D flower-like nanostructure with well-arranged Ni(OH)2 nanoflakes on the surfaces of TiO2 microspheres;this arrangement led to a six-fold enhancement in photocatalytic hydrogen evolution. The unique p-n type heterostructure not only promotes the separation and transfer of photogenerated charge carriers significantly, but also offers more active sites for photocatalytic hydrogen production. A photocatalytic mechanism is proposed based on the results of electrochemical measurements and X-ray photoelectron spectroscopy.

Growth mechanism and photocatalytic evaluation of flower-like ZnO microstructures prepared with SDBS assistance

Flower-like ZnO microstructures were successfully produced using a hydrothermal method employing ZnSO_(4)/(NH_(4))_(2)SO_(4) as a raw material.The effect of the operating parameters of the hydrothermal temperature, OH^(-)/Zn^(2+) molar ratio, time, and amount of dispersant on the phase structure and micromorphology of the ZnO particles were investigated.The synthesis conditions of the flower-like ZnO microstructures were: hydrothermal temperature of 160℃, OH^(-)/Zn^(2+) molar ratio of 5:1, reaction time of 4 h, and 4 mL of dispersant.The flower-like ZnO microstructures were comprised of hexagon-shaped ZnO rods arranged in a radiatively.Degradation experiments of Rhodamine B with the flower-like ZnO microstructures demonstrated a degradation efficiency of 97.6% after 4 h of exposure to sunshine, indicating excellent photocatalytic capacity.The growth mechanism of the flower-like ZnO microstructures was presented.

Synthesis of Mg_5(CO_3)_4(OH)_2·4H_2O with Flower-like Micro-structure and Its Catalytic Activity for Transesterification of Dimethyl Carbonate with Phenol

A novel flower-like hydrated magnesium carbonate hydroxide, Mg5 （CO3 ）4 （OH）2·4H2O, with micro-structure composed of individual thin nano-sheets was synthesized using a facile solution route without the use of template or organic surfactant. Reaction time has an important effect on the final morphology of the product. The micro-structure and morphology of Mg5 （CO3）4 （OH）2·4H2O were characterized by means of X-ray diffractometry （XRD）, fieldemission scanning electron microscopy（FE-SEM）. Brunauer-Emmett-Teller（BET） surface areas of the samples were also measured. The probable formation mechanism of flower-like micro-structure was discussed. It was found that Mg5 （CO3）4（ OH）2·4H2O with flower-like micro-structure was a novel and efficient catalyst for the synthesis of diphenyl carbonate （DPC） by transesterification of dimethyl carbonate （DMC） with phenol.

Reduced graphene oxide doping flower-like Fe_(7)S_(8) nanosheets for high performance potassium ion storage

Finding easy-to-operate strategy to obtain anode material with well-designed structure and excellent electrochemical performance is necessary to promote the development of the future potassium-ion batteries(PIBs).In this work,we synthesized reduced graphene oxide doping flower-like Fe_(7)S_(8) nanosheets electrode materials using one-step hydrothermal strategy.The rGO@Fe_(7)S_(8) composite is composed of homogeneous Fe_(7)S_(8) and reduced graphene oxide thin nanosheets.This unique structure not only promotes the penetration of electrolyte and increases the conductive of the pure Fe_(7)S_(8) electrode materials,but also relieves the volume expansion of K^(+) during charge/discharge process.When applied this interesting anode electrode for PIBs,the rGO@Fe_(7)S_(8) exhibits excellent electrochemical performance.It delivers a high reversible specific capacity of 445 mAh g^(-1) at 50 mA g^(-1),excellent rate performance(284 mAhg^(-1)at 500 mA g^(-1) and 237 mAh g^(-1) at 1000 mA g^(-1)),and a high cycling stability at 100 mA g^(-1)(maintained 355 mAh g^(-1) after 300 cycles).

Preparation and Characterization of Three-dimensional Chrysanthemun Flower-like Calcium Carbonate

Calcium carbonate with three-dimensional chrysanthemun flower-like structure was successfully prepared from calcium chloride and sodium carbonate ethanol/water mixed solution by a simple precipitation method,using trisodium citrate as crystal modifier.The experimental results show that the three-dimensional structure of chrysanthemun flower-like calcium carbonate is built up with several symmetrical micrometer multi-layer petals arranged around the multi-layer pancake-liked center,and the micrometer center and petals are assemblied by a large number of nanometer spherical particles with size 10-20 nm.It is found that the amount of trisodium citrate,the ethanol volume content has an important influence on the formation of this morphology.A possible mechanism is proposed to explain the formation of three-dimensional chrysanthemun flower-like calcium carbonate according the results.Scanning electron microscopy（SEM）,X-ray powder diffraction（XRD）,flourier transform infrared spectroscopy（FT-IR）,thermogravimety analysis（TG）,transmission electron microscopy（TEM） equipped with energy-dispersive X-ray（EDX）,and selected area electron diffraction（SAED） were used to characterize the crystals.

Fabrication and photocatalytical properties of flower-like TiO_2 nanostructures

Three-dimensional(3D)flower-like anatase TiO2 nanostructures and flower-like titanate nanostructures were successfully synthesized via hydrothermal synthesis followed by post-treatment from titanium powder.The flower-like anatase TiO2 nanostructures were characterized in detail with scanning electron microscopy(SEM),X-ray diffraction(XRD),UV-vis spectrum and nitrogen adsorption-desorption measurement,respectively.It is found that the flower-like TiO2 nanostructures have a high specific surface area and a large light-harvesting efficiency.The photocatalytical activity of the flower-like anatase TiO2 nanostructures was determined by degradation of methylene blue in aqueous solution,and was compared with commercial P25 titania.It is revealed that the photocatalytical activity of the flower-like anatase TiO2 nanostructures is enhanced a lot.The apparent rate constant of the flower-like anatase TiO2 nanostructures is almost 2 times that of P25 titania.

Flower-like ZnO modified with BiOI nanoparticles as adsorption/catalytic bifunctional hosts for lithium–sulfur batteries

Due to the high specific capacity and energy density, lithium–sulfur battery is regarded as a potential energy storage conversion system. However, the serious shuttle effect and the sluggish electrochemical reaction kinetics impede the practical use of lithium–sulfur battery. In the interests of breaking through the above knotty problems, herein we propose to use the polar flower-like Zn O modified by Bi OI nanoparticles as bifunctional host with catalytic and adsorption ability for polysulfides in lithium–sulfur battery.It can be found that this adsorption/catalytic host integrates the functions of adsorption and mutual catalytic conversion of polysulfides, in which the polar flower-like Zn O can effectively capture the polysulfides through strong polar-polar interaction, simultaneously the BiOI nanoparticles can accelerate the mutual conversion of polysulfides to Li2 S through reducing the activation energy and conversion energy barrier required for the electrochemical reaction. As a result, under a sulfur loading of 2.5 mg cm^(-2), the lithium–sulfur battery with Zn O/Bi OI/CNT/S as cathode reveals a considerable initial specific capacity of1267 mAh g^(-1) at a current density of 0.1 C. Even the current density increased to 1 C, the capacity can reach as 873.4 mAh g^(-1), together with a good capacity retention of 67.1% after 400 cycles. Therefore,after systematically study the positive effects of the flower-like ZnO modified by catalytic BiOI nanoparticles on the adsorption and catalytic conversion of polysulfides, this work provides a new idea for the development and application of high-performance lithium–sulfur batteries.

Facile fabrication of spherical flower-like Mg(OH)2 and its fast and efficient removal for heavy metal ions

Spherical flower-like Mg(OH)_(2) was fabricated from MgSO_(4) effluent and its adsorption performance for heavy metal ions was evaluated.The appropriate fabrication conditions are as follows:Mg^(2+)/NH4OH molar ratio of 1:0.5,temperature of 120°C and time of 1 h at Mg^(2+)concentration of 2 mol/L.Spherical flower-like Mg(OH)_(2) composed of ultra-thin sheets exhibits an excellent adsorption ability for Ni^(2+),Cu^(2+),Zn^(2+),Pb^(2+),Fe^(3+)and Co^(2+),and the adsorption reaches the equilibrium in 6 min.The maximum adsorption capacities of the studied heavy metal ions onto Mg(OH)_(2) at 20°C are 58.55,85.84,44.94,485.44,625.00 and 27.86 mg/g,respectively.The adsorption is well fitted by the Langmuir model,indicating that the adsorption is monolayer.The adsorption kinetics follows the pseudo-second-order model.Chemisorption is the operative mechanism.Spherical flower-like Mg(OH)_(2) is a qualified candidate for heavy metal ions removal.

Synthesis of Three-Dimensional Hierarchical Flower-Like Mg–Al Layered Double Hydroxides with Excellent Adsorption Performance for Organic Anionic Dyes

In this work,a facile and effective strategy to prepare three-dimensional(3D)hierarchical flower-like Mg–Al layered double hydroxides(3D-LDH)was developed via a one-step double-drop coprecipitation method usingγ-Al 2O 3particles as a template.The characterization and experimental results showed that the calcined product,3D-LDO,features a large specific surface area of 204.2 m^(2)/g,abundant active sites,and excellent adsorption performance for Congo red(CR),methyl orange(MO),and methyl blue(MB).The maximum adsorption capacities of 3D-LDO for CR,MO,and MB were 1428.6,476.2,and 1666.7 mg/g,respectively;such performance is superior to that of most reported adsorbents.The adsorption mechanism of organic anionic dyes by 3D-LDO was extensively investigated and attributed to surface adsorption,the memory effect of 3D-LDO,and the unique 3D hierarchical flower-like structure of the adsorbent.Recycling performance tests revealed that3D-LDO has satisfactory reusability for the three organic anionic dyes.

In-situ electrodeposited flower-like NiFeOxHy/rGO on nickel foam for oxygen evolution reaction

Developing cost-effective electrocatalysts for oxygen evolution reaction (OER) in basic media is critical to hydrogen production from renewable energy. Herein, in-situ electrodeposited flower-like NiFeO x H y and NiFeO x H y /rGO composite electrocatalysts on Ni foam for OER are reported. The active sites of the flower-like electrocatalysts are increased significantly due to the enhanced NiFeO x H y surface areas and numerous exposed layered edges and edge defects. Reduced graphene oxide (rGO) has been introduced to fabricate NiFeO x H y /rGO composite film, further improving the conductivity and OER performance of the flower-like NiFeO x H y . The optimized NiFeO x H y /rGO exhibits superior OER performance with a Tafel slope of 29.11 mV/decade, an overpotential of 200 mV at 10 mA/cm 2 in 1 mol/L KOH and favorable long-term stability.

Feature Designed Growth of 3D Flower-like SiO2 Growing on Polyethyleneimine Modified CaCO3 Microparticles

We report on the ability to create complex 3D flower-like SiO2 in vitro via CaCO3 micropar- icles supported by polyethyleneimine mediated biosilicification under experimentally altered chemical influences. The morphology, structure, composition of the product have been inves- tigated with the X-ray photoelectron spectrum, scanning electron microscope, transmission electron microscope, and energy-dispersive spectroscopy. Tile overall morphologies could be controlled to shift from a characteristic network of flower-like silica sphere to a sheet-like structure by adjusting physical adsorption of different amount of polyethyleneimine onto the surface of the CaCO3 microparticles.

Synthesis of flower-like WS_(2) by chemical vapor deposition

Flower-like tungsten disulfide(WS_(2))with a diameter of 5-10μm is prepared by chemical vapor deposition(CVD).Scanning electron microscopy(SEM),energy dispersive spectrometer(EDS),Raman spectroscopy,and ultraviolet-visible(UV-vis)spectroscopy are used to characterize its morphological and optical properties,and its growth mechanism is discussed.The key factors for the formation of flower-like WS_(2)are determined.Firstly,the cooling process causes the generation of nucleation dislocations,and then the"leaf"growth of flower-like WS_(2)is achieved by increasing the temperature.

A Novel Method Using Flower-like Manganese Oxide Nanozymes for Colorimetric Detection of Ascorbic Acid

This paper proposes a method of utilizing a flower-like MnOx nanozyme to conduct a colorimetric detection of ascorbic acid.The nanozyme is obtained by a chain of reaction of K3[Fe(CN)6],MnSO4·H2O,polyvinyl pyrrolidone(PVP),NH4F,ethanol,and water.During the experimental process,the flower-like nanozyme is added to the mixed solution,including phosphate buffer,H2O2,and 3,3’,5,5’-tetramethylbe nzidine(TMB).The optimum reaction condition as following:pH 3.0,30μL 500mM H2O2,25μL 92 mM TMB,and 30μL 0.1mM nanozyme.Under the optimum condition,the detection range is 2-26mM,and the linear detection range is 2-20mM.

Synthesis of Flower-Like Bi2Te3 Nano Structure and Studying Its Structural and Thermo-electric Properties

Flower-like Bi2Te3 nanostructures were successfully synthesised for the first time by a simple magnetron technique or D.C. sputtering method. The phase and morphology of the products were characterized by X-ray diffraction （XRD）, manning electron microscope （SEM） and atomic force microscope （AFM）. It was found that the as-deposited Bi2Te3 has a well re-crystallized Rhombohedral phase and consisted of a wealth of flower-like structure, also the thermo-electric properties of Bi2Te3 were examined and we find that the Seebeck coefficient is 136.6μ volt/K.

Characterization of MnWO_4 with flower-like clusters produced using spray pyrolysis

MnWO4 (huebnerite) with flower-like clusters of nano-plates was produced from the solutions containing MnCl2·4H2O and Na2WO4·2H2O by the 300 ℃ spray pyrolysis. The phase was detected by X-ray diffraction (XRD) and selected area electron diffraction (SAED), and is in accordance with the results characterized using energy dispersive X-ray (EDX) analysis. The flower-like clusters of nano-plates were characterized using scanning and transmission electron microscopes (SEM and TEM), and their parallel lattice planes using a high resolution transmission electron microscope (HRTEM). Vibration spectra of the huebnerite structured products were characterized using Raman and Fourier transform infrared (FTIR) spectrometers. Their photoluminescence (PL) emissions are in the same spectral region at 405-412 nm.

Flower-like CuS/γ-Fe_(2)O_(3) van der Waals heterostructures with highefficient electromagnetic wave absorption

The escalating electromagnetic(EM)pollution issues and the demand to elevate military stealth technology make it imperative to develop cost-effective and high-performance electromagnetic wave(EMW)absorbing materials.In this paper,the flower-like CuS/γ-Fe_(2)O_(3) van der Waals(vdW)heterostructures have been synthesized via a facile two-step solvothermal approach.The flower-like CuS skeleton increases the attenuation path of EMW while reducing the material density.Different contents ofγ-Fe_(2)O_(3) nanoparticles anchor between the flower-like CuS nanosheets to constitute a heterogeneous structure,which enables dielectric and magnetic loss synergistically to optimize impedance matching and remarkably improve the EMW absorption performance.The minimum reflection loss(RLmin)is-49.36 dB with a thickness of only 1.6 mm and the effective absorption bandwidth(EAB)reaches 4.64 GHz(13.36–18 GHz).By adjusting the thickness of the absorber,the EAB can cover 96%of the GHz band.Notably,the superior absorption of-61.53 dB at middle frequency band can be obtained by adjusting the amount of Fe_(2)O_(3) addition.In this study,the adjustment of EM parameters and the optimization of impedance matching have been achieved by constructing a novel vdW heterogeneous structure,which provides fresh ideas and references for the design of high-performance EMW absorbing materials.