Magmatic-hydrothermal Evolution and Mineralization Mechanisms of the Wangjiazhuang Cu(-Mo)Deposit in the Zouping Volcanic Basin,Shandong Province,China:Constraints from Fluid Inclusions

The Wangjiazhuang Cu(-Mo)deposit,located within the Zouping volcanic basin in western Shandong Province,China,is unique in this area for having an economic value.In order to expound the metallogenetic characteristics of this porphyry-like hydrothermal deposit,a detailed fluid inclusion study has been conducted,employing the techniques of representative sampling,fluid inclusion petrography,microthermometry,Raman spectroscopy,LA-ICP-MS analysis of single fluid inclusions,as well as cathode fluorescence spectrometer analysis of host mineral quartz.The deposit contains mainly two types of orebodies,i.e.veinlet-dissemination-stockwork orebodies in the K-Si alteration zone and pegmatiticquartz sulfide veins above them.In addition,minor breccia ore occurs locally.Four types of fluid inclusions in the deposit and altered quartz monzonite are identified:L-type one-or two-phase aqueous inclusions,V-type vapor-rich inclusions with V/L ratios greater than 50%-90%,D-type multiphase fluid inclusions containing daughter minerals or solids and S-type silicate-bearing fluid inclusions containing mainly muscovite and biotite.Ore petrography and fluid inclusion study has revealed a three-stage mineralization process,driven by magmatic-hydrothermal fluid activity,as follows.Initially,a hydrothermal fluid,separated from the parent magma,infiltrated into the quartz monzonite,resulting in its extensive K-Si alteration,as indicated by silicate-bearing fluid inclusions trapped in altered quartz monzonite.This is followed by the early mineralization,the formation of quartz veinlets and dissemination-stockwork ores.During the main mineralization stage,due to the participation and mixing of meteoric groundwater with magmatic-sourced hydrothermal fluid,the cooling and phase separation caused deposition of metals from the hydrothermal fluids.As a result,the pegmatitic-quartz sulfide-vein ores formed.In the late mineralization stage,decreasing fluid salinity led to the formation of L-type aqueous inclusions and chalcopyrite-sulfosalt ore.Coexistence of V-type and D-type inclusions and their similar homogenization temperatures with different homogenization modes suggest that phase separation or boiling of the ore-forming fluids took place during the early and the main mineralization stages.The formation P-T conditions of S-type inclusions and the early and the main mineralization stages were estimated as ca.156-182 MPa and 450-650℃,350-450℃,18-35 MPa and 280-380℃,8-15 MPa,respectively,based on the microthermometric data of the fluid inclusions formed at the individual stages.

Geochemical characteristics of temperature and pressure of Paleozoic reservoir fluid inclusions in Xuanjing region, Lower Yangtze area

In order to understand the geochemical characteristics of Paleozoic reservoir fluids in Xuanjing region,Lower Yangtze area,drilling core samples from Y and D wells were tested and analyzed to study the fluid inclusion types and composition.Pressure correction was undertaken to determine the temperature and pressure environment for inclusion formation,and the influence of fluid characteristics of the Upper Permian and Lower Triassic reservoirs on the preservation of shale gas was investigated.According to petrograph-ic observations,fluid inclusions are mainly brine and bitumen inclusions.Bitumen inclusions are mainly distributed in holes and fractures,and with smaller individuals.No visible fluorescence was observed,and the vitrinite reflectance is 3.39%–3.92%.This indicates that there had been oil and gas accumulation in the early stage of diagenesis in the study area,but due to the influence of magmatic hydrothermal solution,oil and gas underwent thermal metamorphism in the early stage,making liquid petroleum into solid bitumen.At present,oil and gas in the reservoir were largely formed in the late stage.During the continuous process in which shale was buried,light oil and gas were generated.Light oil and gas underwent magmatic and tectonic hydrothermal processes in some areas,resulting in high-temperature metamorphic cracking that formed dry gas.Moreover,nitrogen inclusions are found in fluid inclusions,forming metamorphic fluids caused by mag-matic hydrothermal activities.The study shows that Paleozoic reservoirs in Xuanjing area are characterized by self-generation and self-storage.Furthermore,the mechanism of shale gas accumulation is not only related to the buried hydrocarbon generation process of shale itself,but is also related to later magmatic activity and tectonic hydrothermal transformation.Therefore,preservation conditions are generally key factors of shale gas accumulation in this area.

Microthermometry and Synchrotron Radiation X-ray Fluorescence Analysis of Fluid Inclusions in the Dongping Gold Deposit,Northern Margin of the North China Craton

To shed light on the genesis of the Dongping deposit and reveal the behaviour of CO_(2),Au and other ore elements(e.g.,Cu,Fe,Zn,As,Sb,Co etc.)in ore-forming fluids,petrographic,microthermometric and synchrotron radiation X-ray fluorescence(SRXRF)analyses of fluid inclusions were conducted.The ore-forming fluid is characterized as an H_(2)O-CO_(2)-NaCl system with medium-high temperatures and low salinity.Four mineralization stages are identified,namely,feldsparquartz(stage 1);pyrite-white quartz(stage 2);sulfide-smoky grey quartz(stage 3);and carbonate-quartz(stage 4).Three types of inclusions were distinguished,based on fluid composition,phase assemblages and mode of homogenization.Type A:H_(2)O-rich fluid inclusions show 2 phases(liquid H_(2)O(LH_(2)O)+vapour H_(2)O(VH_(2)O))at room temperature and homogenize to the liquid phase.Type B:H_(2)O-CO_(2)fluid inclusions contain 2–3 phases(liquid H_(2)O(LH_(2)O)+vapour CO_(2)(VCO_(2));liquid H_(2)O(LH_(2)O)+liquid CO_(2)(LCO_(2)));liquid H_(2)O(LH_(2)O)+liquid CO_(2)(LCO_(2))+vapour CO_(2)(VCO_(2)))at room temperature and homogenized to the liquid H_(2)O phase.Type C:H_(2)O-CO_(2)fluid inclusions show 2 phases(liquid H_(2)O(LH_(2)O)+liquid CO_(2)(LCO_(2))at room temperature and homogenize to a critical state.CO_(2)is clearly more enriched in the fluid inclusions of stages 2 and 3 than in stage 1.Stage 1 is dominated by type A(H_(2)O-rich)inclusions with homogenization temperatures(Th)of 220–359℃and salinities of 1.1–3.1 wt%NaCl equivalent.Type B(CO_(2)-rich)inclusions gradually increase in stages 2 and 3.The Th range of type B inclusions in stage 2 is 241–397℃with salinities of 2.2–6.9 wt%NaCl equivalent;the Th range of type A inclusions is 217–373℃with salinities of 1.2–8.1 wt%NaCl equivalent.The Th range of type B inclusions in stage 3 is 215–361℃with salinities of 2.9–6.1 wt%NaCl equivalent;the range of type A inclusions is 158–351℃with a salinity of 0.7–5.5 wt%NaCl equivalent.Stage 4 is characterized by type A with Th of 151–250℃and salinities of 0.9–8.3 wt%NaCl equivalent.The mapping results show that elements As,Te and Sb are more concentrated in vapour CO_(2)than in liquid H_(2)O at room temperature,which suggests that vapour components are more able to transport elements when phase separation occurs.The SRXRF quantitative results show that Au,Cl,S and some other metals are obviously more enriched in the fluid inclusions of stages 2 and 3 than those in stage 1.Additionally,the contents of S in stages 1–3 are much lower than those of Cl,which suggests that gold might migrate mainly in the form of a gold-chloride complex.Au is more enriched in type B fluid inclusions than in type A fluid inclusions,which suggests that the enrichment and migration of gold are closely related to CO_(2)and CO_(2)plays a critical role in the migration and enrichment of gold.The trace elements in the fluid have a similar change trend to those in the Yanshanian syenogranite distributed in the southeastern part of the mining area,which may provide some evidence for an intrusion-related genesis for the Dongping gold deposit.

Geochemistry,Fluid Inclusions and Sulfur Isotopes of the Goshgarchay Cu-Au Deposit(Western Azerbaijan)in Lesser Caucasus:Implications for the Origins of Ore-forming Fluids

The Goshgarchay Cu-Au deposit is located in the central part of the northwest flank of the Murovdagh region in the Lesser Caucasus.The Goshgarchay Cu-Au deposit is associated with Middle Jurassic volcanic and Late Jurassic-Early Cretaceous high-K calc-alkaline intrusive rocks.The Cu-Au mineralization is commonly related to quartz-sericite-chlorite alteration dominantly composed of chalcopyrite,gold,sphalerite,pyrite,bornite,hematite,covellite,chalcocite,malachite,and azurite.The Goshgarchay copper-gold deposit,which is 600 m wide and approximately 1.2 km long,is seen as a faultcontrolled and vein-,stockwork-and disseminated type deposit.The Goshgarchay Cu-Au deposit predominantly comprises Cu(max.64500 ppm)and Au(max.11.3 ppm),while it comprises relatively less amounts Zn(max.437 ppm),Mo(max.47.5 ppm),Pb(max.134 ppm),and Ag(max.21 ppm).The homogenization temperatures and salinities of fluid inclusions in quartz for stage Ⅰ range from 380℃ to 327℃,and 6.9 wt% to 2.6 wt% NaCl eq.,respectively.Thand salinities in quartz for stage Ⅱ range from 304℃ to 253℃,and 7.6 wt% to 3.2 wt% NaCl eq.,respectively.The calculated δ^(34)S_(h2s)values(-1.5‰ to 5.5‰)of sulfides and especially the narrow range of δ^(34)S_(h2s) values of chalcopyrite and bornite(between -0.07‰ and +0.7‰)indicate that the source of the Goshgarchay Cu-Au mineralization is magmatic.Based on the mineralogical,geochemical,fluid inclusion,and sulfur isotopic data,the Goshgarchay Cu-Au deposit represents a late stage peripheral magmatic-hydrothermal mineralization probably underlain by a concealed porphyry deposit.

Mineralization of the Liwu large-scale stratiform copper deposits in Sichuan Province, China: Constraints from fluid inclusions

The Liwu stratiform copper deposit is located in the northwestern Jianglang dome,western China.Current studies mainly focus on the genetic type and mineralization of this deposit.Detailed fluid inclusion characteristics of metallogenic period quartz veins were studied to reveal the ore-forming fluid features.Laser Raman analysis indicates that the ore-forming fluids is a H_(2)O-NaCl-CH_(4)(-CO_(2))system.Fluid inclusions microthermometry shows a homogenization temperature of 181-375°C and a salinity of 5.26%-16.99%for the disseminated-banded Cu-Zn mineralization;but a homogenization temperature of 142-343°C and a salinity of 5.41%-21.19%for the massive-veined Cu-Zn mineralization.These features suggest a medium-high temperature and a medium salinity for the ore-forming fluids.H-O isotopic data indicates that the ore-forming fluids were mainly from the metamorphic and magmatic water,plus minor formation water.And sulfur isotopic data indicates that sulfur was mainly derived from the formation and magmatic rocks.Metallogenesis of the disseminated-banded mineralization was mainly correlated with fluid mixing and water-rock reaction;whereas that of the massive-veined mineralization was mainly correlated with fluid boiling.The genetic type of the deposit is a medium-high temperature hydrothermal deposit related to magmatism and controlled by shear zones.This study is beneficial to understand the stratiform copper deposit.

He-Ar Isotopic Systematics of Fluid Inclusions in Pyrites from PGEpolymetallic Deposits in Lower Cambrian Black Rock Series, South China

He-Ar isotopic compositions of fluid inclusions trapped in pyrites from some representative PGE-polymetallic deposits in Lower Cambrian black rock series in South China were analyzed by using an inert gas isotopic mass spectrometer. The results show that the ore-forming fluids possess a low 3He/4He ratio, varying from 0.43×10-8 to 26.39×10-8, with corresponding R/Ra value of 0.003-0.189. The 40Ar/36Ar ratios are 258-287, close to those of air saturated water (ASW). He-Ar isotopic indicator studies show that the ore-forming fluids were mainly derived from the formation water or basinal hot brine and sea water, while the content of mantle-derived fluid or deep-derived magmatic water might be negligible. The PGE-polymetallic mineralization might be related to the evolution of the Caledonian miogeosynclines distributed along the southern margin of the Yangtze Craton. During the Early Cambrian, the formation water or basinal hot brine trapped in Caledonian basins which accumulated giant thick sediments was expelled and migrated laterally along strata because of the pressure generated by overlying sediments. The basinal hot brine ascended along faults, mixed with sea water and finally deposited ore minerals.

Discovery and Significance of High CH_4 Primary Fluid Inclusions in Reservoir Volcanic Rocks of the Songliao Basin,NE China

Comparing compositions of the fluid inclusions in volcanic rocks to the contents and isotopes of the gases in corresponding volcanic reservoirs using microthermometry, Raman microspectroscopy and mass spectrum analysis, we found that： （1） up to 82 mole% methane exists in the primary inclusions hosted in the reservoir volcanic rocks; （2） high CH4 inclusions recognized in the volcanic rocks correspond to CH4-bcaring CO2 reservoirs that are rich in helium and with a high ^3He/^4He ratio and which show reversed order of 813C in alkane; （3） in gas reservoirs of such abiotic methane （〉80%） and a mix of CH4 and CO2, the enclosed content of CH4 in the volcanic inclusions is usually below 42 mole%, and the reversed order of δ^13C in alkane is sometimes irregular in the corresponding gas pools; （4） a glassy inclusion with a homogeneous temperature over 900℃ also contains a small portion of CH4 although predominantly CO2. This affinity between gas pool and content of inclusion in the same volcanic reservoirs demonstrates that magma-originated gases, both CH4 and CO2, have contributed significantly to the corresponding gas pools and that the assumed hydrocarbon budget of the bulk earth might be much larger than conventionally supposed.

Genesis of the Zhaokalong Fe-Cu Polymetallic Deposit at Yushu, China: Evidence from Ore Geochemistry and Fluid Inclusions

The ore types of the Zhaokalong Fe-Cu deposit are divided into two categories： sulfide-type and oxide-type. The sulfide-type ore include siderite ore, galena-sphalerite ore and chalcopyrite ore, whereas the oxide-type ore include magnetite ore and hematite ore. The ore textures and structures indicate that the Zhaokalong deposit is of the sedimentary-exhalative mineralization type. Geochemical analyses show that the two ore types have a high As, Sb, Mn, Co and Ni content. The REE patterns reveal an enrichment of the LREE compared to the HREE. Isotopic analysis of siderite ore reveal that the j13CpDB ranges from -2.01 to 3.34 （%0） whereas the JISOsMow ranges from 6.96 to 18.95 （%0）. The fluid inclusion microthermometry results indicate that homogenization temperatures of fluid inclusions in quartz range from 131 to 181~C, with salinity values of 1.06 to 8.04 wt% NaCI eq. The mineralizing fluid therefore belongs to the low temperature - low salinity system, with a mineralizing solution of a CO2-Ca2＋（Na＋, K＋）-SO42- （F-, CI--H20 system. The geochemical results and fluid inclusion data provide additional evidence that the Zhaokalong deposit is a sedex-type deposit that experienced two stages of mineralization. The sulfide mineralization probably occurred first, during the sedimentary exhalative process, as exhibited by the abundance of marine materials associated with the sulfide ores, indicating a higher temperature and relatively deoxidized oceanic depositional environment. After the main exhalative stage, hydrothermal activity was superimposed to the sulfide mineralization. The later stage oxide mineralization occurred in a low temperature and relatively oxidized environment, in which magmatic fluid circulation was dominant.

Degree of Brine Evaporation and Origin of the Mengyejing Potash Deposit：Evidence from Fluid Inclusions in Halite

The Mengyejing potash deposit is located in the southern port of the Simao Basin, Yunnan Province, and is hosted in mid-Cretaceous strata. The chemical compositions of fluid inclusions in halite crystals, collected from the level-610 adit in the deposit, were analysed by laser ablation inductively coupled plasma mass spectrometry（LA-ICP-MS）. The results show that the brine is of the Na-K-Mg-Ca-Cl type and has K concentrations that are distinctly higher than those of Mg and Ca, unlike normal brines associated with Cretaceous halite. The high K concentrations indicate that the degree of evaporation of the ancient Mengyejing saline lake was very high, reaching the sylvite deposition stage but rarely reaching the carnallite deposition stage. The trajectory of the H and O isotopic compositions of the brines in the halite-hosted fluid inclusions corresponds to intense evaporation, indicating that the net evaporation exceeded the net inflow of brines. These brine compositions in halite-hosted fluid inclusions were likely formed by the dissolution of previously deposited K-bearing minerals by fresh continental and/or seawater, forming a type of modified seawater, with deep hydrothermal fluids potentially supplying additional potassium. The basin likely experienced multiple seawater incursion, dissolution and redeposition events in a high-temperature environment with high evaporation rates.

Fluid Inclusions and Metallization of the Kendekeke Polymetallic Deposit in Qinghai Province, China

The Kendekeke polymetallic deposit,located in the middle part of the magmatic arc belt of Qimantag on the southwestern margin of the Qaidam Basin,is a polygenetic compound deposit in the Qimantag metallogenic belt of Qinghai Province.Multi-periodic ore-forming processes occurred in this deposit,including early-stage iron mineralization and lead-zinc-gold-polymetallic mineralization which was controlled by later hydrothermal process.The characteristics of the ore-forming fluids and mineralization were discussed by using the fluid inclusion petrography,Laser Raman Spectrum and micro-thermometry methods.Three stages,namely,S1-stage （copper-iron-sulfide stage）,S2-stage （lead-zinc-sulfide stage） and C-stage （carbonate stage） were included in the hydrothermal process as indicated by the results of this study.The fluid inclusions are in three types：aqueous inclusion （type I）,CO2-aqueous inclusion （type Ⅱ） and pure CO2 inclusion （type Ⅲ）.Type Ⅰ inclusions were observed in the S1-stage,having homogenization temperature at 240-320℃,and salinities ranging from 19.8％ to 25.0％ （wt％ NaCl equiv.）.All three types of inclusions,existing as immiscible inclusion assemblages,were presented in the S2-stage,with the lowest homogenization temperature ranging from 175 ℃ to 295℃,which represents the metallogenic temperature of the S2-stage.The salinities of these inclusions are in the range of 1.5％ to 16％.The fluid inclusions in the C-stage belong to types Ⅰ,Ⅱ and Ⅲ,having homogenization temperatures at 120-210℃,and salinities ranging from 0.9％ to 14.5％.These observations indicate that the ore-forming fluids evolved from high-temperature to low-temperature,from high-salinity to low-salinity,from homogenization to immiscible separation.Results of Laser Raman Spectroscopy show that high density of CO2 and CH4 were found as gas compositions in the inclusions.CO2,worked as the pH buffer of ore-forming fluids,together with reduction of organic gases （i.e.CH4,etc）,affected the transport and sediment of the minerals.The fluid system alternated between open and close systems,namely,between lithostatic pressure and hydrostatic pressure systems.The calculated metallogenic pressures are in the range of 30 to 87 Mpa corresponding to 3 km mineralization depth.Under the influence of tectonic movements,immiscible separation occurred in the original ore-forming fluids,which were derived from the previous high-salinity,high-temperature magmatic fluids.The separation of CO2 changed the physicochemical properties and composition of the original fluids,and then diluted by mixing with extraneous fluids such as meteoric water and groundwater,and metallogenic materials in the fluids such as lead,zinc and gold were precipitated.

A Preliminary Study on Fluid Inclusions and Mineralization of Xitieshan Sedimentary-Exhalative (SEDEX) Lead-Zinc Deposit

The Xitieshan lead-zinc deposit is located at the northern margin of the Qaidam Basin, Qinghai Province, China, and had developed a complete marine sedimentary-exhalative system. Our preliminary study of ore-forming fluids shows that fluid inclusions in quartz from altered stockwork rocks that represent the pipe facies have a wide range of temperature and salinity. The intense fluid activities are characteristics of the pipe facies of the exhalative system. Fluid inclusions in carbonates near the unstratified ore bodies hosted in the thick-bedded marble which represents vent-proximal facies are large in size and have moderate to high temperatures. They represent unerupted sub-seafloor fluid activity. Fluids in altered stockwork rocks and carbonates have similar H20-NaCI-CO2 system, both belonging to the sedimentary-exhalative system. The fluids migrate from the pipe facies to the unstratified ore bodies. Boiling of the fluids causes the separation of CO2 vapor and liquid H2O. When the fluids migrate into the unconsolidated thick-bedded marble, the escape of CO2, decreasing temperature and pressure as well as some involvement of seawater into the fluids result in the unmixing of fluids with high and low salinity and deposition of ore-forming materials. The two unmixed fluids were trapped in unconsolidated carbonates and the ore-forming materials were deposited in the unconsolidated carbonates to form the sedimentary-exhalative type unstratified ore bodies. The oreforming temperature of unstratified ore bodies is up to high temperature indicating that there is a huge ore-forming potential in its deep.

Geochronology,Fluid Inclusions and Isotopic Characteristics of the Dongjun Pb-Zn-Ag Deposit,Inner Mongolia,NE China

The Dongjun Pb-Zn-Ag deposit in the northern part of the Great Xing’an Range(NE China)consists of quartzsulfide vein-type and breccia-type mineralization,related to granite porphyry.Hydrothermal alteration is well-developed and includes potassic-silicic-sericitic alteration,phyllic alteration and propylitic alteration.Three stages of mineralization are recognized on the basis of field evidence and petrographic observation,demarcated by assemblages of quartz-pyritearsenopyrite(early stage),quartz-polymetallic sulfide(intermediate stage)and quartz-carbonate-pyrite(late stage).Zircon LA-ICP-MS U-Pb dating indicates that the granite porphyry was emplaced at 146.7±1.2 Ma(Late Jurassic).Microthermometry and laser Raman spectroscopy shows that ore minerals were deposited in conditions of intermediate temperatures(175-359℃),low salinity(0.5-9.3 wt% Na Cl eqv.)and low density(0.60-0.91 g/cm^(3)).Ore-forming fluids were derived largely from magmatic hydrothermal processes,with late-stage addition of meteoric water,belonging to a H_(2)O-NaCl-CO_(2)±CH_(4) system.The δ^(34)SV-CDT values range from 0.75‰ to 4.70‰.The ^(206)Pb/^(204)Pb,^(207)Pb/^(204)Pb,and ^(208)Pb/^(204)Pb values of the ore minerals are in the ranges of 18.240-18.371,15.542-15.570,and 38.100-38.178,respectively.Data for the S and Pb isotopic systems indicate that the ore-forming metals and sulfur were derived from Mesozoic magma.Based on the geological characteristics and geochemical signatures documented in this study,we conclude that the Dongjun deposit is a mesothermal magmatic hydrothermal vein-type Pb-Zn-Ag deposit controlled by fractures and related to granite porphyry,in response to Late Jurassic tectonic-magmatic-hydrothermal activity.We further conclude that fluid immiscibility,fluid mixing and fluid-rock interactions were the dominant mechanisms for deposition of the ore-forming materials.

Existence and release of fluid inclusions in bornite and its associated quartz and calcite

The existence and release of fluid inclusions in bornite and its associated minerals, namely, quartz and calcite were investigated and confirmed. The structures, forms, and phases of these large quantities of fluid inclusions were also studied. A mass of fluid inclusions with various sizes, distributions, shapes, and phases exist in bornite and its associated minerals. Their sizes vary from a few micrometers to tens of micrometers, and the forms appear as negative crystals, or elongated, elliptical, and irregular. At room temperature, fluid inclusions were mainly characterized as gas-liquid two- phase. However, small amounts of fluid inclusions with pure gas phase and pure liquid single-phase were also observed in quartz and calcite. These fluid inclusions initially broke during the ore crushing and grinding process and then released into the flotation pulp in the flotation process. The quantitative analysis of fluid inclusions in the solution and the comparisons of mineral dissolution show that the amount of copper and iron released by fluid inclusions in the bornite sample is higher than the amount dissolved by the mineral; fluid inclusions in the associated gangue minerals, quartz, and calcite also make contribution.

Fluid Inclusions and Isotope Geochemistry of the Emba Derho and the Debarwa VMS Deposits, Asmara District, Eritrea

Objective Recent exploration indicates several localities with significant gold, copper, and zinc resource potential in the Asmara district, Eritrea, including the Emba Derho and Debarwa volcanic-associated massive sulfide deposits. These deposits are hosted by the Neoproterozoic metamorphic volcanic rocks of Asmara green stone belt, which strike NNW-SSE and are 200 km long and 5-20 km wide, and the mineralization is often associated with the altered and deformed rocks. The Emba Derho deposit, located 12 km northwest of Asmara （Fig. la）, the capital of Eritrea, is the largest Cu-Zn-Au VMS deposit in the Asmara metallogeny belt. It is estimated that the Emba Derho deposit of the Asmara project contains total reserves of 49.8~106 tons of copper ores and 16.8~106 tons of zinc ores. The gold grade of this deposit is about 0.3 lg/t. The Debarwa deposit, situated 26 km southwest of Asmara, has similar ore features with the Emba Derho deposit.

Evaporation Stage of Paleo-saline Lake in the Sichuan Basin, China: Insight from Fluid inclusions in Halite

Sichuan Basin is one of the most important marine–salt forming basins in China. The Simian and Triassic have a large number of evaporites. The Triassic strata have found a large amount of polyhalite and potassium-rich brine. However, no soluble potassium salt deposit were found. In this study, the halite in well Changping 3 which is located at the eastern part of the Sichuan basin was studied using the characteristics, hydrogen and oxygen isotopes of the fluid inclusion in halite to reconstruct the paleoenvironment. The salt rocks in well Changping 3 can be divided into two types: grey salt rock and orange salt rock. The result shows that the isotopic composition of the halite fluid inclusion is distinct from the global precipitation line reflecting that the salt formation process is under strong evaporation conditions and the climate is extremely dry. At the same time, compared with the hydrogen and oxygen isotopes of brine in the Sichuan Basin and the hydrous isotope composition of the inclusions in the salt inclusions of other areas in China, it is shown that the evaporation depth of the ancient seawater in the Sichuan Basin was high and reached the precipitation of potassium and magnesium stage.

Genesis of the Ciemas Gold Deposit and Relationship with Epithermal Deposits in West Java,Indonesia:Constraints from Fluid Inclusions and Stable Isotopes

The Ciemas gold deposit is located in West Java of Indonesia, which is a Cenozoic magmatism belt resulting from the Indo-Australian plate subducting under the Eurasian plate. Two different volcanic rock belts and associated epithermal deposits are distributed in West Java： the younger late Miocene-Pliocene magmatic belt generated the Pliocene-Pleistocene epithermal deposits, while the older late Eocene-early Miocene magmatic belt generated the Miocene epithermal deposits. To constrain the physico-chemical conditions and the origin of the ore fluid in Ciemas, a detailed study of ore petrography, fluid inclusions, laser Raman spectroscopy, oxygen-hydrogen isotopes for quartz was conducted. The results show that hydrothermal pyrite and quartz are widespread, hydrothermal alteration is well developed, and that leaching structures such as vuggy rocks and extension structures such as comb quartz are common. Fluid inclusions in quartz are mainly liquid-rich two phase inclusions, with fluid compositions in the NaCI-H2O fluid system, and contain no or little CO2. Their homogenization temperatures cluster around 240℃-320℃, the salinities lie in the range of 14-17 wt.% NaCI equiv, and the calculated fluid densities are 0.65-1.00 g/cm^3. The values of δ18OH2O-VSMOW for quartz range from ＋5.5%0 to ＋7.7‰, the δDVSMOW of fluid inclusions in quartz ranges from -70‰ to -115‰. All of these data indicate that mixing of magmatic fluid with meteoric water resulted in the formation of the Ciemas deposit. A comparison among gold deposits of West Java suggests that Miocene epithermal ore deposits in the southernmost part of West Java were more affected by magmatic fluids and exhibit a higher degree of sulfidation than those of Pliocene-Pleistocene.

A Review of Fluid Inclusions in Diagenetic Systems

The study of fluid inclusions can help constrain the conditions at which diagenetic minerals precipitated,leading to a better understanding of the geologic controls and relative timing of changes in porosity and/or mineralising events.Many of the diagenetic minerals are easily deformed and it is important to check for any post-entrapment changes to the inclusions.Possible post-entrapment changes include reaction with the host crystal,necking down,nucleation metastability and thermal reequilibration.The recommended method of detecting these problems is to examine individual fluid inclusion assemblages（FIAs） and report data for each individual FIA.These studies have been enhanced by the development of new micro-analytical techniques such as micro-fluorescence spectroscopy,micro-infrared spectroscopy,nuclear magnetic resonance,various mass spectrometry techniques and the analysis of individual fluid inclusions using laser ablation/decrepitation methods.Special techniques have been developed for hydrocarbon-bearing inclusions such as the Grains containing Oil Inclusions（GOI）,Fluid Inclusion Stratigraphy（FIS）,and the Molecular Composition of Inclusions（MCI） techniques.The fluid inclusions that form in some minerals during diagenesis provide the only direct means of examining the fluids present in these systems.They provide useful temperature,pressure,and fluid composition data that cannot be obtained by other means.

Zn release from fluid inclusions in a natural sphalerite

The type, size, and compositions of fluid inclusions in a natural sphalerite were investigated and the total concentration of Zn released from the fluid inclusions was measured. To compare the total concentration of Zn released from the fluid inclusions with that dissolved from the sphalerite itself, dissolution experiments and theoretical calculations for the dissolution equilibrium of the sphalerite were also performed. The results indicate that large numbers of fluid inclusions with various sizes exist in the sphalerite, which can be divided into four types, i.e., pure gaseous inclusions, pure liquid inclusions, gas-liquid inclusions, and gas-liquid inclusions containing solid minerals. These inclusions were broken open during the grinding process, and their compositions were released to the solution. The total concentration of Zn released from these inclusions reaches 18.35×10^-6 mol/L, which is much higher than that of Zn dissolved from the sphalerite itself （1.93×10^-6 mol/L） and the theoretical calculation value （2.73×10^-8 mol/L）.

The homogenization temperature in the fluid inclusions of Ordovician halite and paleoclimatic implication

1 Introduction The homogenization temperature of fluid inclusions reflects the temperatures of the brines from which halite crystals grew.Therefore,it is a powerful mean to reveal the paleoclimate.Northern Shaanxi Salt Basin is located in the central and eastern of Ordos Basin.We have detail petrographical research and the homogenization

Characterization and recovery of the halophiles in the fluid inclusions in halite

1 Introduction It is the focus of geology and biology that the creature preserved in the geological history and the organic evolution.The creature preserved in geological history by these things:sedimentary,frozen earth,chrysophoron and evaporation salt.Evaporation salt can preserve the microbe