Sound Transmission Loss Analysis of a Double Plate-Acoustic Cavity Coupling System with In-Plane Functionally Graded Materials

In this paper, the isogeometric analysis (IGA) is employed to develop an acoustic radiation model for a double plate-acoustic cavity coupling system, with a focus on analyzing the sound transmission loss (STL). The functionally graded (FG) plate exhibits a different material properties in-plane, and the power-law rule is adopted as the governing principle for material mixing. To validate the harmonic response and demonstrate the accuracy and convergence of the isogeometric modeling, ANASYS is utilized to compare with numerical examples. A plane wave serves as the acoustic excitation, and the Rayleigh integral is applied to discretize the radiated plate. The STL results are compared with the literature, confirming the reliability of the coupling system. Finally, the investigation is conducted to study impact of cavity depth and power-law parameter on the STL.

Vibration Reduction by a Partitioned Dynamic Vibration Absorber with Acoustic Black Hole Features

Vibration quality is a vital indicator for assessing the progress of modern equipment.The dynamic vibration absorber(DVA)based on the acoustic black hole(ABH)feature is a new passive control method that manipulates waves.It offers efficient energy focalization and broad-spectrum vibration suppression,making it highly promising for applications in large equipment such as aircraft,trains,and ships.Despite previous advancements in ABH-DVA development,certain challenges remain,particularly in ensuring effective coupling with host structures during control.To address these issues,this study proposes a partitioned ABH-featured dynamic vibration absorber(PABH-DVA)with partitions in the radial direction of the disc.By employing a plate as the host structure,simulations and experiments were conducted,demonstrating that the PABH-DVA outperforms the original symmetric ABH-DVA in terms of damping performance.The study also calculated and compared the coupling coefficients of the two ABH-DVAs to uncover the mechanism behind the enhanced damping.Simulation results revealed that the PABH-DVA exhibits more coupled modes,occasionally with lower coupling coefficients than the symmetric ABH-DVA.The influence of frequency ratio and modal mass was further analyzed to explain the reasons behind the PABH-DVA's superior damping performance.Additionally,the study discussed the impact of the number of slits and their orientation.This research further explains the coupling mechanism between the ABH-DVA and the controlled structure,and provides new ideas for the further application of ABH in engineering.

Bandgap adjustment of a sandwich-like acoustic metamaterial plate with a frequency-displacement feedback control method

Several types of acoustic metamaterials composed of resonant units have been developed to achieve low-frequency bandgaps.In most of these structures,bandgaps are determined by their geometric configurations and material properties.This paper presents a frequency-displacement feedback control method for vibration suppression in a sandwich-like acoustic metamaterial plate.The band structure is theoretically derived using the Hamilton principle and validated by comparing the theoretical calculation results with the finite element simulation results.In this method,the feedback voltage is related to the displacement of a resonator and the excitation frequency.By applying a feedback voltage on the piezoelectric fiber-reinforced composite(PFRC)layers attached to a cantilever-mass resonator,the natural frequency of the resonator can be adjusted.It ensures that the bandgap moves in a frequency-dependent manner to keep the excitation frequency within the bandgap.Based on this frequency-displacement feedback control strategy,the bandgap of the metamaterial plate can be effectively adjusted,and the vibration of the metamaterial plate can be significantly suppressed.

Simulation Analysis of Torsion Beam Hydroforming Based on the Fluid-Solid Coupling Method

Hydroformed parts are widely used in industrial automotive parts because of their higher stiffness and fatigue strength and reduced weight relative to their corresponding cast and welded parts.This paper reports a hydraulicforming experimental platform for rectangular tube fittings that was constructed to conduct an experiment on the hydraulic forming of rectangular tube fittings.A finite element model was established on the basis of the fluid–solid coupling method and simulation analysis.The correctness of the simulation analysis and the feasibility of the fluid–solid coupling method for hydraulic forming simulation analysis were verified by comparing the experimental results with the simulation results.On the basis of the simulation analysis of the hydraulic process of the torsion beam using the fluid–solid coupling method,a sliding mold suitable for the hydroforming of torsion beams was designed for its structural characteristics.The effects of fluid characteristics,shaping pressure,axial feed rate,and friction coefficient on the wall thicknesses of torsions beams during formation were investigated.Fluid movement speed was related to tube deformation.Shaping pressure had a significant effect on rounded corners and straight edges.The axial feed speed was increased,and the uneven distribution of wall thicknesses was effectively improved.Although the friction coefficient had a nonsignificant effect on the wall thickness of the ladder-shaped region,it had a significant influence on a large deformation of wall thickness in the V-shaped area.In this paper,a method of fluid-solid coupling simulation analysis and sliding die is proposed to study the high pressure forming law in torsion beam.

Acoustic longitudinal mode coupling in w-shaped Al/Ge Co-doped fibre

This paper proposes a novel fibre structure aiming at distributed temperature and strain sensing. Utilizing Al2O3 and CeO2 as dopants to form a w-shaped acoustic waveguide, it realizes modal coupling between longitudinal acoustic modes of its inner and outer core layers, leading to a dual-peak or multi-peak Brillouin gain spectrum. The relationship between the acoustic mode coupling properties and the fibre materials, doping concentrations and structural parameters are investigated, showing that the positions of mode coupling points in acoustic dispersion curves and the coupling intensities can be designed flexibly. A specific fibre design for the discriminative sensing of temperature and strain under a pump wavelength of 1.55 μm is given. The responses of its Brillouin gain properties on temperature and strain are analysed theoretically, demonstrating its potential for distributed fibre Brillouin sensing.

The Propagation, Excitation and Coupling of Acoustic Waves in Phonon Band-gap Materials

Acoustic wave exhibits inherently different characters of propagation, excitation and coupling in phonon band-gap materials in which its elastic, piezoelectric constants are modulated in order of acoustic wavelength. These kinds of novel materials were exampled by phononic crystals with elastic constants modulation, acoustic superlattice and ionic-type phononic crystals with piezoelectric constants modulation. In this talk, phonic crystals were constructed with steel rods embedded in air. Negative refraction of acoustic wave was both experimentally and theoretically established in the phononic crystals. The propagation of acoustic wave in the crystals show acoustic band structures because the waves are strong scattered at the Brillouin Zone Boundaries, analogy to electron band structure in real crystals and photonic band structure in photonic crystals. In the acoustic superlattice, ultrasonic waves could be excited by applied alternative electric fields by piezoelectric effect. The frequency, mode and amplitude of the excited wave are determined by the microstructured parameters of the acoustic superlattice at the condition of phase matching. Ionic-type phononic crystals describe the coupling between superlattice phonon and electromagnetic wave. The coupling process resulted in the polariton with a dispersion relation totally different from that of both superlattice phonon and E-M waves, analogy to the polariton of the ionic crystals but in microwave instead of infrared light. These microstructural dielectric materials show artificial abnormal properties and will find novel application in ultrasonic devices and microwave devices.

Application of the generalized quasi-complementary energy principle to the fluid-solid coupling problem

The fluid-solid coupling theory, an interdisciplinary science between hydrodynamics and solid mechanics, is an important tool for response analysis and direct design of structures in naval architecture and ocean engineering. By applying the corresponding relations between generalized forces and generalized displacements, convolutions were performed between the basic equations of elasto-dynamics in the primary space and corresponding virtual quantities. The results were integrated and then added algebraically. In light of the fact that body forces and surface forces are both follower forces, the generalized quasi-complementary energy principle with two kinds of variables for an initial value problem is established in non-conservative systems. Using the generalized quasi-complementary energy principle to deal with the fluid-solid coupling problem and to analyze the dynamic response of structures, a method for using two kinds of variables simultaneously for calculation of force and displacement was derived.

Fluid-solid coupling numerical simulation of charge process in variable-mass thermodynamic system

Abstract： A joint solution model of variabk：-mass flow in two-phase region and fluid-solid coupling heat transfer, concerned about the charge process of variable-mass thermodynamic system, is built up and calculated by the finite element method （FEM）. The results are basically consistent with relative experimental data. The calculated average heat transfer coefficient reaches 1.7~105 W/（m2. K）. When the equal percentage valve is used, the system needs the minimum requirements of valve control, but brings the highest construction cost. With the： decrease of initial steam pressure, the heat transfer intensity also weakens but the steam flow increases. With the initial water filling coefficient increasing or the temperature of steam supply decreasing, the amount of accumulative steam flow increases with the growth of steam pressure. When the pressure of steam supply drops, the steam flow gradient increases during the maximum opening period of control valve, and causes the maximum steam flow to increase.

Fully fluid-solid coupling dynamic model for seismic response of underground structures in saturated soils

The seismic response characteristics of underground structures in saturated soils are investigated.A fully fluid-solid coupling dynamic model is developed and implemented into ABAQUS with a user-defined element to simulate the dynamic behavior of saturated soils.The accuracy of the model is validated using a classic example in literature.The performance of the model is verified by its application on simulating the seismic response characteristics of a subway station built in saturated soils.The merits of the model are demonstrated by comparing the difference of the seismic response of an underground structure in saturated soils between using the fully coupling model and a single-phase medium model.The study finds that the fully coupling model developed herein can simulate the dynamic response characteristics of the underground structures in saturated soils with high accuracy.The seismic response of the underground structure tends to be underestimated by using the single-phase medium model compared with using the fully coupling model,which provides a weaker confining action to the underground structure.

Couple analyzing the acoustic emission characters from hard composite rock fracture

Rock mass is fractured media. Its fracture is a nonlinear process. Theaccumulation of acoustic emission (AF) is closely related to the degree of damage. The dynamicsproblem is simply described based on the non-equilibrium statistical theory of crack evolvement,trying to use the hybrid analysis of the statistical theory and scan electron microscopy (SEM), thecharacters of AE signals from rock damage in a mined-out area is synthetically analyzed andevaluated. These provide an evidence to reverse deduce and accurately infer the position of rockfracture for dynamical hazard control.

FLUID-SOLID COUPLING MATHEMATICAL MODEL OF CONTAMINANT TRANSPORT IN UNSATURATED ZONE AND ITS ASYMPTOTICAL SOLUTION

The process of contaminant transport is a problem of multicomponent and multiphase flow in unsaturated zone. Under the presupposition that gas existence affects water transport, a coupled mathematical model of contaminant transport in unsaturated zone has been established based on fluid_solid interaction mechanics theory. The asymptotical solutions to the nonlinear coupling mathematical model were accomplished by the perturbation and integral transformation method. The distribution law of pore pressure, pore water velocity and contaminant concentration in unsaturated zone has been presented under the conditions of with coupling and without coupling gas phase. An example problem was used to provide a quantitative verification and validation of the model. The asymptotical solution was compared with Faust model solution. The comparison results show reasonable agreement between asymptotical solution and Faust solution, and the gas effect and media deformation has a large impact on the contaminant transport. The theoretical basis is provided for forecasting contaminant transport and the determination of the relationship among pressure_saturation_permeability in laboratory.

Fluid-solid coupling model for studying wellbore instability in drilling of gas hydrate bearing sediments

As the oil or gas exploration and development activities in deep and ultra- deep waters become more and more, encountering gas hydrate bearing sediments （HBS） is almost inevitable. The variation in temperature and pressure can destabilize gas hydrate in nearby formation around the borehole, which may reduce the strength of the formation and result in wellbore instability. A non-isothermal, transient, two-phase, and fluid-solid coupling mathematical model is proposed to simulate the complex stability performance of a wellbore drilled in HBS. In the model, the phase transition of hydrate dissociation, the heat exchange between drilling fluid and formation, the change of mechanical and petrophysical properties, the gas-water two-phase seepage, and its interaction with rock deformation are considered. A finite element simulator is developed, and the impact of drilling mud on wellbore instability in HBS is simulated. Results indicate that the re- duction in pressure and the increase in temperature of the drilling fluid can accelerate hydrate decomposition and lead to mechanical properties getting worse tremendously. The cohesion decreases by 25% when the hydrate totally dissociates in HBS. This easily causes the wellbore instability accordingly. In the first two hours after the formation is drilled, the regions of hydrate dissociation and wellbore instability extend quickly. Then, with the soaking time of drilling fluid increasing, the regions enlarge little. Choosing the low temperature drilling fluid and increasing the drilling mud pressure appropriately can benefit the wellbore stability of HBS. The established model turns out to be an efficient tool in numerical studies of the hydrate dissociation behavior and wellbore stability of HBS.

Numerical simulation on fault water-inrush based on fluid-solid coupling theory

About 75% water-inrush accidents in China are caused by geological structure such as faults, therefore, it is necessary to investigate the water-inrush mechanism of faults to provide references for the mining activity above confined water. In this paper, based on the fluid-solid coupling theory, we built the stress-seepage coupling model for rock, then we combined with an example of water-inrush caused by fault, studied the water-inrush mechanism by using the numerical software COMSOL Mutiphysics, analyzed the change rule of shear stress, vertical stress, plastic area and water pressure for stope with a fault, and estimated the water-inrush risk at the different distances between working faces and the fault. The numerical simula- tion results indicate that： （1） the water-inrush risk will grow as the decrease of the distance between working face and the fault; （2） the failure mode of the rock in floor with fault is shear failure; （3） the rock between water-containing fault and working face failure is the reason for water-inrush.

Circuit-field coupled finite element analysis method for an electromagnetic acoustic transducer under pulsed voltage excitation

This paper presents an analytical method for electromagnetic acoustic transducers （EMATs） under voltage excitation and considers the non-uniform distribution of the biased magnetic field. A complete model of EMATs including the non-uniform biased magnetic field, a pulsed eddy current field and the acoustic field is built up. The pulsed voltage excitation is transformed to the frequency domain by fast Fourier transformation （FFT）. In terms of the time harmonic field equations of the EMAT system, the impedances of the coils under different frequencies are calculated according to the circuit-field coupling method and Poynting＇s theorem. Then the currents under different frequencies are calculated according to Ohm＇s law and the pulsed current excitation is obtained by inverse fast Fourier transformation （IFFT）. Lastly, the sequentially coupled finite element method （FEM） is used to calculate the Lorentz force in the EMATs under the current excitation. An actual EMAT with a two-layer two-bundle printed circuit board （PCB） coil, a rectangular permanent magnet and an aluminium specimen is analysed. The coil impedances and the pulsed current are calculated and compared with the experimental results. Their agreement verified the validity of the proposed method. Furthermore, the influences of lift-off distances and the non-uniform static magnetic field on the Lorentz force under pulsed voltage excitation are studied.

An iterative algorithm for analysis of coupled structural-acoustic systems subject to random excitations

This paper analyzes the random response of structural-acoustic coupled systems. Most existing works on coupled structural-acoustic analysis are limited to systems under deterministic excitations due to high computational cost required by a random response analysis. To reduce the computational burden involved in the coupled random analysis, an iterative procedure based on the Pseudo excitation method has been developed. It is found that this algorithm has an overwhelming advantage in computing efficiency over traditional methods, as demonstrated by some numerical examples given in this paper.

NUMERICAL SIMULATION OF COUPLED STRUCTURAL- ACOUSTIC PROBLEMS USING FEM/IBEM

The numerical method of a coupled finite element and indirect boundary element equation for computing both the structural vibration and the acoustic radiation was presented. The coupling matrices were discussed and physical degrees of freedom of the structure were treated in terms of its modal basis in vacuum to decouple the computation from the entire coupled structural acoustic equations. The numerical results for the ellipsoidal shell immersed in two different fluids indicate that heavy fluid changes greatly structural and acoustic behavior. This method can be applied to analyze acoustic and vibration for arbitrary complex structures in fluids.

3D numerical simulation in acoustic-elastic coupled media with staggered-grid finite-difference method

Acoustic-elastic coupled media is often encountered in most marine explorations, and accurate simulation of acoustic-elastic coupled media is of great significance. At present, the study of acoustic-elastic coupled media still assumes that the solid of the acoustic-elastic coupled media is isotropic, but this assumption is not in accordance with the actual situation. In this paper, we derive the solid media of acoustic-elastic coupled media from isotropic media to anisotropic media, and propose an acoustic-elastic coupled medium based ontransverse isotropic media with vertical symmetric axes(VTI) to improve the accuracy of forward modeling. Based on the relationship between the Thomsen parameter and the coefficient matrix of the anisotropic elastic wave equation, we transform the Thomson parameter into a velocity model with anisotropic properties. We use a staggered grid finite difference method to simulate the propagation of a wavefield in a three-dimensional acoustic-elastic coupled media. We obtain the snapshots of the wave field when the solid of the acoustic-elastic coupled media is an isotropic medium and a VTI media. When the solid of the acoustic-elastic coupled media is considered VTI media, we can observe the qP wave and qS wave that cannot be observed in the isotropic medium from the wave field snapshot. We can also find that the seismic records obtained by the method we use are more realistic. The algorithm proposed in this paper is of great significance for high-precision ocean numerical simulation.

Fluid-solid coupling numerical simulation of micro-disturbance grouting treatment for excessive deformation of shield tunnel

Micro-disturbance grouting is a recovery technique to reduce the excessive deformation of operational shield tunnels in urban areas.The grout mass behaves as a fluid in the ground before hardening to form a grout–soil mixture,which highlights the necessity of using fluid–solid coupling method in the simulation of grouting process.Within a discrete element modeling environment,this paper proposes a novel fluid-solid coupling method based on the pore density flow calculation.To demonstrate the effectiveness of this method,it is applied to numerical simulation of micro-disturbance grouting process for treatment of large transverse deformation of a shield tunnel in Shanghai Metro,China.The simulation results reveal the mechanism of recovering tunnel convergence by micro-disturbance grouting in terms of compaction and fracture of soil,energy analysis during grouting,and mechanical response of soil-tunnel interaction system.Furthermore,the influence of the three main grouting parameters(i.e.,grouting pressure,grouting distance,and grouting height)on tunnel deformation recovery efficiency is evaluated through parametric analysis.In order to efficiently recover large transverse deformation of shield tunnel in Shanghai Metro,it is suggested that the grouting pressure should be about 0.55 MPa,the grouting height should be in the range of 6.2–7.0 m,and the grouting distance should be in the range of 3.0–3.6 m.The results provide a valuable reference for grouting treatment projects of over-deformed shield tunnel in soft soil areas.

Numerical Simulation of the Mass Movement Process of the 2018 Sedongpu Glacial Debris Flow by Using the Fluid-Solid Coupling Method

In the context of global warming and intensified human activities,glacier instability in plateau regions has increased,and glacier debris flows have become active,which poses a significant threat to the lives and property of people and socioeconomic development.The mass movement process of glacier debris flows is extremely complex,so this paper uses the 2018 Sedongpu glacier debris flow event on the Qinghai-Tibet Plateau as an example and applies a numerical simulation method to invert the whole process of mass movement.In view of the interaction between phases in the process of motion,we use the fluid-solid coupling method to describe the mass movement.The granular-flow model and drift-flux model are employed in FLOW3D software to study the mass movement process of glacier debris flows and explore their dynamic characteristics.The results indicate that the glacier debris flow lasted for 700 s,and the movement process was roughly divided into four stages,including initiation,scraping,surging and deposition;the depositional characteristics calculated by the fluid-solid coupling model are consistent with the actual survey results and have good reliability;strong erosion occurs during the mass movement,the clear volume amplification effect,and the first wave climbs 17.8 m across the slope.The fluid-solid coupling method can better simulate glacier debris flows in plateau regions,which is helpful for the study of the mechanism and dynamic characteristics of such disasters.

Vibration and Acoustic Radiation from Orthogonally Stiffened Infinite Circular Cylindrical Shells in Water

Based on the motion differential equations of vibration and acoustic coupling system for thin elastic shells with ribs, by means of the Fourier integral transformation and the Fourier inverse transformation, as well as the stationary phase method, an analytic solution, which has satisfying computational effectiveness and precision, is derived for the solution to the vibration and acoustic radiation from a submerged stiffened infinite circular cylinder with both ring and axial ribs. It is easy to analyze the effect of stiffening supports in the acoustic radiation field by use of the formulas obtained by the presented method and corresponding numerical computation. It is shown that the axial-stiffeners can improve the mechanical and acoustical characteristics. Moreover, the present method can be used to study the acoustic radiation mechanism of the type of structure.