We devoloped an efficient and simple method to synthesize fluorene derivatives via intramolecular Friedel-Crafts alkylation of chalcones.The transform is catalyzed by TfOH in CH_(3)NO_(2)at 80℃and the yield is up to ...We devoloped an efficient and simple method to synthesize fluorene derivatives via intramolecular Friedel-Crafts alkylation of chalcones.The transform is catalyzed by TfOH in CH_(3)NO_(2)at 80℃and the yield is up to 99%.展开更多
Several series of fluorene-based light-emitting polymers with the emphasis on achieving efficient and stable bluelight emission are reported. Spiro-functionalization may narrow the emission spectra (with smaller tail ...Several series of fluorene-based light-emitting polymers with the emphasis on achieving efficient and stable bluelight emission are reported. Spiro-functionalization may narrow the emission spectra (with smaller tail at Ionger wavelengths)of fluorene homopolymers to provide purer blue emission. The thermal spectral stability of the polymers could also beimproved because of the elevation of the glass transition temperature caused by the spiro-functionalization. However, theexcimer emission in fluorene homopolymers is not suppressed by the spiro-functionalization. Alternate copolymers of 9,9-dihexylfluorene and substituted phenylenes may emit efficient blue ligh both in solution and in film. The optical propertiesare dependent on the substituion on the phenylene ring. The alkoxy-substituted polymers displayed efficient PL and EL andgood thermal spectral stability. The HOMO and LUMO energy levels of the polymers based on the backbone structure couldbe tuned in a wide range by attaching different functional groups on the phenylene ring. By attaching europium(III) complexat the ends of the side chains in the alternate copolymers, we have demonstrated a new approach to achieving red emissionwith a very narrow spectrum. The copolymers of 9,9-dihexylfluorene and thiophene and bithiophene with differentsubstitutions were also synthesized to study the effect of substitution and regioregularity on the optical and other physicalproperties of the polymers.展开更多
A novel compound of 10-(3,4-dichlorophenymethylidyne)-9,10-dihydrofluorene (C20H12Cl2, Mr = 323.20) was synthesized via Knoevenagel reaction under microwave irradiation (500 w) within short reaction time (8 min...A novel compound of 10-(3,4-dichlorophenymethylidyne)-9,10-dihydrofluorene (C20H12Cl2, Mr = 323.20) was synthesized via Knoevenagel reaction under microwave irradiation (500 w) within short reaction time (8 min), giving a high yield of product (87%). Its structure was determined by IR, 1H NMR, MS, elemental analysis and X-ray diffraction. The crystal of the new compound is of monoclinic system, space group P21/c with a = 12.8781(13), b = 16.5067(16), c = 7.4656(7), β = 103.567(2)o, V = 1542.7(3)3, Z = 4, Dc = 1.392 g/cm3, μ = 0.413 mm-1, F(000) = 664, R = 0.0569 and wR = 0.1342 for 3355 observed reflections with I 2σ(I). The crystal structure involves a conjugated system which shows an olefin structure.展开更多
The solubilities of fluorene in Exxsol D30, Exxsol D40, and crude dimethyl ethylbenzene(DME) from 299.25 to 356.85 K were investigated using the gas chromatography(GC) observation technique. Solubility curves were obt...The solubilities of fluorene in Exxsol D30, Exxsol D40, and crude dimethyl ethylbenzene(DME) from 299.25 to 356.85 K were investigated using the gas chromatography(GC) observation technique. Solubility curves were obtained based on the results and correlated with the modified Apelblat and λh equations to provide a valid model to predict the dissolution thermodynamic properties of fluorene at different temperatures, which is important in separating fluorene by crystallization.展开更多
A novel fluorene derivative containing triphenylamine groups, 2,7-bis[4-(diphe- nylamino)-phenyl]fluorene (C49H36N2, Mr = 652.80), was synthesized via Suzuki coupling reaction (yield: 19%) and its crystal struc...A novel fluorene derivative containing triphenylamine groups, 2,7-bis[4-(diphe- nylamino)-phenyl]fluorene (C49H36N2, Mr = 652.80), was synthesized via Suzuki coupling reaction (yield: 19%) and its crystal structure was determined by single-crystal X-ray diffraction. It crystallizes in triclinic, space group P1 with a = 9.320(4), b = 11.250(6), c = 17.369(6) A, a = 88.035(3), β = 86.450(5), γ = 73.524(5)°. V= 1742.8(13)A3, Z = 2, Dc = 1.244 g/cm3, p(MoKa) = 0.072 mm-1, F(000) = 688, S = 1.095, the final R = 0.0616 and wR = 0.1878. It presents a linear framework constituted by a linkage of fluorene as a bridge and two triphenylamine groups. Its spectral and electrochemical properties were studied by UV-Vis absorption, fluorescence spectroscopy and cyclic voltammetry (CV). This compound can emit intense blue fluorescence with a peak wavelength of 446 nm and a full width at half maximum (FWHM) of 38 nm under UV excitation at 350 nm in film. The highest occupied molecular orbital (HOMO) energy level, the lowest unoccupied molecular orbital (LUMO) energy level and optical band gap (Eg) of the title compound are -5.46, -2.57 and 2.89 eV, respectively.展开更多
Geometric structures of 135 polychlorinated fluorene (PCFR) molecules were optimized using density functional theory (DFT) at the B3LYP/6-311G** level and their thermodynamic properties in the ideal gas state we...Geometric structures of 135 polychlorinated fluorene (PCFR) molecules were optimized using density functional theory (DFT) at the B3LYP/6-311G** level and their thermodynamic properties in the ideal gas state were calculated. The relations of these thermodynamic properties with the number and position of chlorine atoms were also explored, from which the relative stability of PCFR congeners was theoretically proposed according to the magnitude of the relative standard Gibbs free energy of formation (Δr,fGθ). The results show that the geometric configuration of PCFR isomers is determined by the position of chlorine atoms. There exist two types of intramolecular weak interactions, i.e., C–H···Cl and Cl···Cl interactions in PCFR molecules. The change of ΔfHθ and ΔfGθ of most stable PCFR isomers with increasing the number of chlorine atoms is different from that in most unstable PCFR congeners. The values of ΔfHθ and ΔfGθ for PCFR isomers with the same number of chlorine atoms strongly depend on the position of chlorine atoms and the relative stability of PCFR congeners is mainly determined by intramolecular delocalized π bond and Cl···Cl nuclear repulsive interaction.展开更多
A series of linear and X-shaped oligo(para-phenylene) derivatives functionalized with fluorene ethynylenes 1,3 and 4 were synthesized through sequent Sonogashira coupling and Suzuki-Miyaura reaction in high yield.Th...A series of linear and X-shaped oligo(para-phenylene) derivatives functionalized with fluorene ethynylenes 1,3 and 4 were synthesized through sequent Sonogashira coupling and Suzuki-Miyaura reaction in high yield.The electron-donating group-OCH3 and electron-withdrawing counterparts-CF3 were introduced to tune the spectra properties of compounds 3 and 4.The detail investigation of their photophysical properties in solution and film indicated that the introduction of both -OCH3 and -CF3 makes maximum emission distinct red-shift in comparison with parent compound 1,but the latter more prominently.展开更多
Novel fluorene-based poly(aromatic diacetylene)s have been synthesized by CuCl-catalyzed oxidative coupling of aromatic diynes.New aromatic diynes 2,7-diethynyl-9,9-bis(triphenylamine)fluorene(M_1)is synthesized by mu...Novel fluorene-based poly(aromatic diacetylene)s have been synthesized by CuCl-catalyzed oxidative coupling of aromatic diynes.New aromatic diynes 2,7-diethynyl-9,9-bis(triphenylamine)fluorene(M_1)is synthesized by multistep reactions.The structures and properties of the polymers are characterized and evaluated by IR,NMR,TGA,UV, photoluminescence(PL),and cyclic voltammetry analyses.These polymers possess good thermal stability.All the polymers are completely soluble in coammon solvents such as toluene,THF,c...展开更多
Organic light-emitting diodes (OLEDs) composed of a novel fluorene derivative of 2,3-bis(9,9-dihexyl-9H-fluoren- 2-yl)-6,7-difluoroquinoxaline (F2Py) were fabricated, and exciplex emission was observed in the de...Organic light-emitting diodes (OLEDs) composed of a novel fluorene derivative of 2,3-bis(9,9-dihexyl-9H-fluoren- 2-yl)-6,7-difluoroquinoxaline (F2Py) were fabricated, and exciplex emission was observed in the device. To depress the exciplex in an OLED for pure colour light emission, 4, 4'-N,N'-dicarbazole-biphenyl (CBP) was inserted as a separator at the donor/acceptor interface. It was found that the device without the CBP layer emitted a green light peaking at 542 nm from the exciplex and a shoulder peak about 430 nm from F2Py. In contrast, the OLED with CBP layer emitted only a blue light peak at about 432 nm from F2Py. Device efficiencies were calculated by a simulative mode in an injection controlled type mechanism, and the results showed that exciplexes yield much lower quantum efficiency than excitons. The device with CBP has a higher power efficiency as no exciplex was present.展开更多
Fluorene is a polycyclic aromatic hydrocarbon, which is a hazardous toxic chemical in the environment. The measurement of low concentrations of fluorene is a subject of intense interest in chemistry and in the environ...Fluorene is a polycyclic aromatic hydrocarbon, which is a hazardous toxic chemical in the environment. The measurement of low concentrations of fluorene is a subject of intense interest in chemistry and in the environment. Polypyrrole chitosan cobalt ferrite nanoparticles are prepared using the electrochemical method. The prepared layers are characterized using field emission scanning electron microscopy, Fourier transform infrared spectroscopy, and energy dispersive spectroscopy. The layers are used to detect fluorene using the surface plasmon resonance technique at room temperature. The composite layer is evaluated after detection of fluorene using atomic force microscopy. The fluorene is bound on the layer, and the shift of the resonance angle is about 0.0052°, corresponding to the limitation of 0.01 ppm.展开更多
Two new cobalt(II) coordination complexes, namely [Co(HL)2(biim)(H2O)2]n·n H2O(1) and [Co(Et L)2(biim)]n·3 n(H2O)·2 n(Et HL)(2)(H2L =(fluorene-9,9-diyl)dipropanoic acid, biim = 1,...Two new cobalt(II) coordination complexes, namely [Co(HL)2(biim)(H2O)2]n·n H2O(1) and [Co(Et L)2(biim)]n·3 n(H2O)·2 n(Et HL)(2)(H2L =(fluorene-9,9-diyl)dipropanoic acid, biim = 1,3-bis(imidazol-1-yl)butane), have been synthesized using the same starting reactants but different solvent medium. The two complexes exhibit distinctly different structures. Compound 1 exhibits a one-dimensional linear chain structure. However, complex 2 reveals a one-dimensional zigzag chain structure. Thermogravimetric analyses(TGA) and luminescent properties of these two complexes have been discussed.展开更多
Oxidation kinetics of fluorene (Fl) and its halogenated derivatives, namely, 2,7-dichlorofluorene (Fl-Cl), 2,7-dibromofluorene (Fl-Br) and 2,7-diiodofluorene (Fl-I), by permanganate ion in both perchloric and sulfuric...Oxidation kinetics of fluorene (Fl) and its halogenated derivatives, namely, 2,7-dichlorofluorene (Fl-Cl), 2,7-dibromofluorene (Fl-Br) and 2,7-diiodofluorene (Fl-I), by permanganate ion in both perchloric and sulfuric acid media have been investigated using conventional spectrophotometric technique. In both acidic media, the reactions manifested first order kineticsin [permanganate] and less than unit order each in [reductants] and [acid]. Increasing ionic strength had no effect on the oxidation rates. Oxidation rates of fluorenes in perchloric acid were higher than those in sulfuric acid and the order of the oxidation rates was: Fl > Fl-I > Fl-Br > Fl-Cl. Final oxidation products were identified by GC/MS and FT-IR analyses in all cases as 9H-fluorenone derivatives. Reaction constants as well as activation parameters of the second order rate constants were also evaluated.展开更多
Hexakis(4-methoxyphenyl)benzene (HPB-OMe(1)) and hexakis(2,6-dimethyl-4-methoxyphenyl)benzene (HPB-OMe(2)) were synthesized via organometallic complex catalysis. The treatment of HPB-OMe(1) with FeCl3 caused cyclodehy...Hexakis(4-methoxyphenyl)benzene (HPB-OMe(1)) and hexakis(2,6-dimethyl-4-methoxyphenyl)benzene (HPB-OMe(2)) were synthesized via organometallic complex catalysis. The treatment of HPB-OMe(1) with FeCl3 caused cyclodehydrogenation at two positions to yield an oligophenylene with an indeno[1,2-b]fluorene structure (IF-OMe). Deprotection of the methoxy groups of these compounds was conducted by treatment with BBr3. Deprotonation of the OH groups of HPB-OH(1), HPB-OH(2), and IF-OH through treatment with NaH caused a bathochromic shift in the absorption and photoluminescence (PL) peaks. The bathochromic shift of the deprotonated species increased with the donor number (DN) of the solvents. These observations can be explained as the consequence of intramolecular charge transfer (ICT) from the ONa groups to the inner benzene rings.展开更多
Alternating copolymerization of 9,9-dihexyl-2,7-dibromofluorene, N-hexyl-2,7-dibromocarbazole (HCz) with diethynyldimethylsilane, diethynyldiphenylsilane, has been investigated using Sonogashira coupling reaction. Pho...Alternating copolymerization of 9,9-dihexyl-2,7-dibromofluorene, N-hexyl-2,7-dibromocarbazole (HCz) with diethynyldimethylsilane, diethynyldiphenylsilane, has been investigated using Sonogashira coupling reaction. Photophysical properties of the resulting copolymers were investigated with UV-Vis absorption and photoluminescence spectroscopy. All the copolymers in chloro-form solution showed absorption peaks at 270 - 280 nm with shoulder peaks at around 380 nm derived from π-π* transition or intra-molecular charge transfer through σ-π moiety, respectively. The chloroform solutions of the copolymers showed broad emission peaks at 415 - 425 nm. The emission wave lengths of the copolymers in the solid state (cast film) detected at 360 - 385 nm were remarkably blue-shifted in comparison with those in the chloroform solutions. Hydrosilylation reaction of the copolymers with 1,4-bis(dimethylsilyl)benzene yielded networked copolymers soluble in chloroform, indicating formation of branching polymers. The chloroform solutions of the HCz-based networked copolymers showed bimodal emission derived from new highly energy states in the σ-π conjugation.展开更多
π-Electron coupling of pendant conjugated segment inπ-stacked semiconducting polymers always causes the formation of defect trapped sites and further quenched high-band excitons,which is harmful to the performance a...π-Electron coupling of pendant conjugated segment inπ-stacked semiconducting polymers always causes the formation of defect trapped sites and further quenched high-band excitons,which is harmful to the performance and stability of deep-blue polymer light-emitting diodes(PLEDs).Herein,considerate of“defect”carbazole(Cz)electromers in poly(N-vinylcarbazole)(PVK),a series of fluorene units are introduced into pendant segments(PVCz-DMeF,PVCz-FMeNPh and PVCz-DFMeNPh)to suppress the strongπ-electron coupling of pendant Cz units and enhance radiative transition toward fabricating sable PLEDs.Compared to PVCz-FMeNPh and PVCz-DFMeNPh,PVCz-DMeF spin-coated films show a relatively efficient deep-blue emission,completely similar to its single pendant chromophore,confirmed an extremely weak charge-transfer and electron coupling between adjacent pendant segments.Therefore,PLEDs based on PVCz-DMeF present stable and deep-blue emission with a high color purity(0.17,0.08),associated with extremely weak defect emission at 600∼700nm(induced by carbazole electromers).Finally,PLEDs based on PVCz-DMeF/F8BT blended films(1:1)also present the high maximum luminance(Lmax)of 6261 cd/m2 and current efficiency(CE_(max))of 2.03 cd/A,confirmed slightly trapped sites formation.Therefore,precisely control the arrangement and packing model of pendant units inπ-stacked polymer is an essential prerequisite for building efficient and stable emitter for optoelectronic devices.展开更多
As a novel class of spirofluorenes,spirobifluorene(SBF)and spiro[fluo-rene-9,9'-xanthene]derivatives(SFXs)have orthogonal geometric config-uration,spiro-conjugation effect,and rigid steric hindrance,which can be w...As a novel class of spirofluorenes,spirobifluorene(SBF)and spiro[fluo-rene-9,9'-xanthene]derivatives(SFXs)have orthogonal geometric config-uration,spiro-conjugation effect,and rigid steric hindrance,which can be widely used in the fields of synthetic chemistry,materials chemistry and supramolecular chemistry.Due to their facile one-pot synthetic route,and to the variety of molecular designs,SFXs are expected to become new spiro functional materials that replace SBF.In this review,we present the history,development and expansion of SFXs synthesis in one-pot methods,and the advantages and limitations of one-pot synthesis are also dis-cussed.展开更多
A diamine(WuFDA) containing vertical rigid non-planar conjugated fluorene moiety and low polarizability group(C―F)was designed and synthesized through three steps of reactions(halogenated reaction, Suzuki coupling re...A diamine(WuFDA) containing vertical rigid non-planar conjugated fluorene moiety and low polarizability group(C―F)was designed and synthesized through three steps of reactions(halogenated reaction, Suzuki coupling reaction, and reduction reaction).Four kinds of high performance functional polyimides(WuFPI-6 F, WuFPI-BP, WuFPI-BT, and WuFPI-PM) were thus prepared by the condensation polymerization of WuFDA with four commercial dianhydride 6 FDA, BPDA, BTDA, and PMDA, respectively. The polyimides exhibited low dielectric constant, excellent thermal stability, outstanding solubility, good film-forming property, and mechanical properties. The dielectric constants of the polyimides were in the range of 2.28-2.88(f = 10~4 Hz). The 5% weight-loss temperatures(Td 5%)in nitrogen were in the range of 555-584 °C, and the glass transition temperatures(T_g) were in the range of 408-448 °C. The weight loss of WuFPI-BP maintaining at 450 and 500 °C for half an hour was only 0.33% and 1.26%, respectively. All the WuFPIs could be dissolved in almost all organic solvents, even chloroform. The tensile strength and tensile modulus of these films were in the ranges of 78.6-85.7 MPa and 3.1-3.2 GPa, respectively. In addition, the polyimides displayed light color with special fluorescent and resistive switching(ON-OFF) characteristics; the maximum fluorescence emission was observed at 422-424 nm in NMP solution and at 470-548 nm in film state. The memory devices with the configuration of indium tin oxide/WuFPIs/aluminum(ITO/WuFPIs/Al) exhibited distinct volatile memory characteristics of static random access memory(SRAM), with an ON/OFF current ratio of 10~5-10~6. These functional polyimides showed attractive potential applications in the field of high performance flexible polymer photoelectronic devices or polymer memory devices.展开更多
On account of the advantages of organic electroluminescent materials compared with their inorganic counterparts,the development of organic electroluminescent materials is one of the hot areas of the optoelectronic mat...On account of the advantages of organic electroluminescent materials compared with their inorganic counterparts,the development of organic electroluminescent materials is one of the hot areas of the optoelectronic materials.Fluorene and its derivatives,which have an aromatic biphenyl structure with a wide energy gap in the backbones and high luminescent efficiency,have drawn much attention of ma-terial chemists and device physicists.However,one drawback of fluorene-based electroluminescent blue materials is that there is an occurrence of long wavelength emission after annealing the films in air or after operating organic light-emitting diodes for a long time.To clarify the origin of this long wave-length emission,the scientists at home and abroad have put forward all kinds of correlative explana-tions.Among the scientists,some thought it was caused by excimer-related species,while some others claimed that it was caused by the fluorenone of photooxdized fluorene.The corresponding solutions to this problem have also been proposed and the problem has been partially resolved in some degree.The present review summarizes and analyzes the progress made on the origin of long wavelength emission in fluorene-based electroluminescent blue materials at home and abroad in the past few years.Some issues to be addressed and hotspots to be further investigated are also presented and discussed.展开更多
A novel fluorene-bridged tetraketone monomer,9,9-bis[(4-benzilyloxy)phenyl]fluorene(FLTK) was synthesized and characterized.The tetraketone was polymerized with various aromatic tetraamines to afford a series of polyp...A novel fluorene-bridged tetraketone monomer,9,9-bis[(4-benzilyloxy)phenyl]fluorene(FLTK) was synthesized and characterized.The tetraketone was polymerized with various aromatic tetraamines to afford a series of polyphenylquinoxalines(PPQs).The obtained polymers were found to be soluble in common organic solvents such as N-methyl-2-pyrrolidone(NMP),chloroform and m-cresol.Flexible and tough PPQ films obtained by spin-casting their NMP solutions exhibited tensile strengths higher than 60 MPa.The films also demonstrated good thermal stability up to 500℃in nitrogen and glass transition temperatures higher than 280℃.In addition,the PPQ films exhibited good hydrolytic stability. High surface and volume resistivity retentions were achieved for the films after immersion or boiling in water for 24 h.展开更多
A fluorescent organic triarylamine with a symmetric structure, 2,7-bis(N-α-naphthyl-phenylamino)-9,9- diethylfluorene (NPAEF) was synthesized using two methods, modified Ullmann coupling and modified palladium-cataly...A fluorescent organic triarylamine with a symmetric structure, 2,7-bis(N-α-naphthyl-phenylamino)-9,9- diethylfluorene (NPAEF) was synthesized using two methods, modified Ullmann coupling and modified palladium-catalyzed amination. An activated copper and a combination of Pd(OAc)2/P(t-Bu)3 and Pd(dba)2/P(t-Bu)3 were selected as catalysts to improve yields of reactions. These synthetic procedures were also successfully applied to an asymmetric 2-dimesitylboron-7-(N-phenyl-α-naphthylamino)-9,9-diethylfluorene (BNPEF). Photoluminescent emission peaks in solid film and in diluted solution of NPAEF were both observed at 461 nm, while the main emission peaks of BNPEF appeared at 422 nm in hexane, and at 480 nm in methanol. The double emission peaks of BNPEF in hexane reflected fine structure in the vibrational state. With an increasing polarity of solvent, the main PL emission peaks were red-shifted and vibrational fine structure disappeared. Additionally, energy levels of NPAEF were investigated and an electroluminescence (EL) device of ITO/PVK:NPAEF/Al was fabricated, which showed a turn-on voltage of 9 V and peaked at 462 nm. The EL spectrum was in good agreement with PL spectrum, which indicated that they were from the same emitting center in the device.展开更多
文摘We devoloped an efficient and simple method to synthesize fluorene derivatives via intramolecular Friedel-Crafts alkylation of chalcones.The transform is catalyzed by TfOH in CH_(3)NO_(2)at 80℃and the yield is up to 99%.
文摘Several series of fluorene-based light-emitting polymers with the emphasis on achieving efficient and stable bluelight emission are reported. Spiro-functionalization may narrow the emission spectra (with smaller tail at Ionger wavelengths)of fluorene homopolymers to provide purer blue emission. The thermal spectral stability of the polymers could also beimproved because of the elevation of the glass transition temperature caused by the spiro-functionalization. However, theexcimer emission in fluorene homopolymers is not suppressed by the spiro-functionalization. Alternate copolymers of 9,9-dihexylfluorene and substituted phenylenes may emit efficient blue ligh both in solution and in film. The optical propertiesare dependent on the substituion on the phenylene ring. The alkoxy-substituted polymers displayed efficient PL and EL andgood thermal spectral stability. The HOMO and LUMO energy levels of the polymers based on the backbone structure couldbe tuned in a wide range by attaching different functional groups on the phenylene ring. By attaching europium(III) complexat the ends of the side chains in the alternate copolymers, we have demonstrated a new approach to achieving red emissionwith a very narrow spectrum. The copolymers of 9,9-dihexylfluorene and thiophene and bithiophene with differentsubstitutions were also synthesized to study the effect of substitution and regioregularity on the optical and other physicalproperties of the polymers.
基金Supported by the Team Research for Excellent Mid-aged and Young Teachers of Higher Education of Hubei Province (T201006)
文摘A novel compound of 10-(3,4-dichlorophenymethylidyne)-9,10-dihydrofluorene (C20H12Cl2, Mr = 323.20) was synthesized via Knoevenagel reaction under microwave irradiation (500 w) within short reaction time (8 min), giving a high yield of product (87%). Its structure was determined by IR, 1H NMR, MS, elemental analysis and X-ray diffraction. The crystal of the new compound is of monoclinic system, space group P21/c with a = 12.8781(13), b = 16.5067(16), c = 7.4656(7), β = 103.567(2)o, V = 1542.7(3)3, Z = 4, Dc = 1.392 g/cm3, μ = 0.413 mm-1, F(000) = 664, R = 0.0569 and wR = 0.1342 for 3355 observed reflections with I 2σ(I). The crystal structure involves a conjugated system which shows an olefin structure.
文摘The solubilities of fluorene in Exxsol D30, Exxsol D40, and crude dimethyl ethylbenzene(DME) from 299.25 to 356.85 K were investigated using the gas chromatography(GC) observation technique. Solubility curves were obtained based on the results and correlated with the modified Apelblat and λh equations to provide a valid model to predict the dissolution thermodynamic properties of fluorene at different temperatures, which is important in separating fluorene by crystallization.
基金supported by the National Natural Science Foundation of China (Nos. 20805024, and 20971075)the Foundation of the Education Department of Zhejiang Province (No. Y201016284)+2 种基金the Ningbo Municipal Natural Science Foundation (No. 2010A610146)the research foundation of Ningbo University (No. xkl071)the K. C. Wong Magna Fund in Ningbo University
文摘A novel fluorene derivative containing triphenylamine groups, 2,7-bis[4-(diphe- nylamino)-phenyl]fluorene (C49H36N2, Mr = 652.80), was synthesized via Suzuki coupling reaction (yield: 19%) and its crystal structure was determined by single-crystal X-ray diffraction. It crystallizes in triclinic, space group P1 with a = 9.320(4), b = 11.250(6), c = 17.369(6) A, a = 88.035(3), β = 86.450(5), γ = 73.524(5)°. V= 1742.8(13)A3, Z = 2, Dc = 1.244 g/cm3, p(MoKa) = 0.072 mm-1, F(000) = 688, S = 1.095, the final R = 0.0616 and wR = 0.1878. It presents a linear framework constituted by a linkage of fluorene as a bridge and two triphenylamine groups. Its spectral and electrochemical properties were studied by UV-Vis absorption, fluorescence spectroscopy and cyclic voltammetry (CV). This compound can emit intense blue fluorescence with a peak wavelength of 446 nm and a full width at half maximum (FWHM) of 38 nm under UV excitation at 350 nm in film. The highest occupied molecular orbital (HOMO) energy level, the lowest unoccupied molecular orbital (LUMO) energy level and optical band gap (Eg) of the title compound are -5.46, -2.57 and 2.89 eV, respectively.
基金supported by the Natural Science Research Program of Henan Provincial Department of Education (No. 2009A150022)the Young Talented Teacher Foundation of Xinyang Normal University
文摘Geometric structures of 135 polychlorinated fluorene (PCFR) molecules were optimized using density functional theory (DFT) at the B3LYP/6-311G** level and their thermodynamic properties in the ideal gas state were calculated. The relations of these thermodynamic properties with the number and position of chlorine atoms were also explored, from which the relative stability of PCFR congeners was theoretically proposed according to the magnitude of the relative standard Gibbs free energy of formation (Δr,fGθ). The results show that the geometric configuration of PCFR isomers is determined by the position of chlorine atoms. There exist two types of intramolecular weak interactions, i.e., C–H···Cl and Cl···Cl interactions in PCFR molecules. The change of ΔfHθ and ΔfGθ of most stable PCFR isomers with increasing the number of chlorine atoms is different from that in most unstable PCFR congeners. The values of ΔfHθ and ΔfGθ for PCFR isomers with the same number of chlorine atoms strongly depend on the position of chlorine atoms and the relative stability of PCFR congeners is mainly determined by intramolecular delocalized π bond and Cl···Cl nuclear repulsive interaction.
基金Beijing Natural Science Foundation(No.2093033)Scientific Research Project of Beijing Educational Committee(Nos.KM 200910020012 and KM 201010020002) for financial support
文摘A series of linear and X-shaped oligo(para-phenylene) derivatives functionalized with fluorene ethynylenes 1,3 and 4 were synthesized through sequent Sonogashira coupling and Suzuki-Miyaura reaction in high yield.The electron-donating group-OCH3 and electron-withdrawing counterparts-CF3 were introduced to tune the spectra properties of compounds 3 and 4.The detail investigation of their photophysical properties in solution and film indicated that the introduction of both -OCH3 and -CF3 makes maximum emission distinct red-shift in comparison with parent compound 1,but the latter more prominently.
基金This project was financially supported by National Natural Science Foundation of China(No.50473034).
文摘Novel fluorene-based poly(aromatic diacetylene)s have been synthesized by CuCl-catalyzed oxidative coupling of aromatic diynes.New aromatic diynes 2,7-diethynyl-9,9-bis(triphenylamine)fluorene(M_1)is synthesized by multistep reactions.The structures and properties of the polymers are characterized and evaluated by IR,NMR,TGA,UV, photoluminescence(PL),and cyclic voltammetry analyses.These polymers possess good thermal stability.All the polymers are completely soluble in coammon solvents such as toluene,THF,c...
基金Project supported by the National Natural Science Foundation of China(Grant Nos.60736005,60876051 and 60425101-1)the Young Talent Project of Sichuan Province of China(Grant No.09ZQ026-074)+2 种基金the Natural Science Foundation of Sichuan Province of China(Grant No.9140A02060609DZ0208)the Program for New Century Excellent Talents in University(Grant No.NCET-06-0812)the Special Research Foundation for Returned Overseas Scholars of the State Education Ministry (Grant No.GGRYJ08-05)
文摘Organic light-emitting diodes (OLEDs) composed of a novel fluorene derivative of 2,3-bis(9,9-dihexyl-9H-fluoren- 2-yl)-6,7-difluoroquinoxaline (F2Py) were fabricated, and exciplex emission was observed in the device. To depress the exciplex in an OLED for pure colour light emission, 4, 4'-N,N'-dicarbazole-biphenyl (CBP) was inserted as a separator at the donor/acceptor interface. It was found that the device without the CBP layer emitted a green light peaking at 542 nm from the exciplex and a shoulder peak about 430 nm from F2Py. In contrast, the OLED with CBP layer emitted only a blue light peak at about 432 nm from F2Py. Device efficiencies were calculated by a simulative mode in an injection controlled type mechanism, and the results showed that exciplexes yield much lower quantum efficiency than excitons. The device with CBP has a higher power efficiency as no exciplex was present.
文摘Fluorene is a polycyclic aromatic hydrocarbon, which is a hazardous toxic chemical in the environment. The measurement of low concentrations of fluorene is a subject of intense interest in chemistry and in the environment. Polypyrrole chitosan cobalt ferrite nanoparticles are prepared using the electrochemical method. The prepared layers are characterized using field emission scanning electron microscopy, Fourier transform infrared spectroscopy, and energy dispersive spectroscopy. The layers are used to detect fluorene using the surface plasmon resonance technique at room temperature. The composite layer is evaluated after detection of fluorene using atomic force microscopy. The fluorene is bound on the layer, and the shift of the resonance angle is about 0.0052°, corresponding to the limitation of 0.01 ppm.
基金Supported by the Key projects of Hubei Provincial Education Department(D20171902)
文摘Two new cobalt(II) coordination complexes, namely [Co(HL)2(biim)(H2O)2]n·n H2O(1) and [Co(Et L)2(biim)]n·3 n(H2O)·2 n(Et HL)(2)(H2L =(fluorene-9,9-diyl)dipropanoic acid, biim = 1,3-bis(imidazol-1-yl)butane), have been synthesized using the same starting reactants but different solvent medium. The two complexes exhibit distinctly different structures. Compound 1 exhibits a one-dimensional linear chain structure. However, complex 2 reveals a one-dimensional zigzag chain structure. Thermogravimetric analyses(TGA) and luminescent properties of these two complexes have been discussed.
文摘Oxidation kinetics of fluorene (Fl) and its halogenated derivatives, namely, 2,7-dichlorofluorene (Fl-Cl), 2,7-dibromofluorene (Fl-Br) and 2,7-diiodofluorene (Fl-I), by permanganate ion in both perchloric and sulfuric acid media have been investigated using conventional spectrophotometric technique. In both acidic media, the reactions manifested first order kineticsin [permanganate] and less than unit order each in [reductants] and [acid]. Increasing ionic strength had no effect on the oxidation rates. Oxidation rates of fluorenes in perchloric acid were higher than those in sulfuric acid and the order of the oxidation rates was: Fl > Fl-I > Fl-Br > Fl-Cl. Final oxidation products were identified by GC/MS and FT-IR analyses in all cases as 9H-fluorenone derivatives. Reaction constants as well as activation parameters of the second order rate constants were also evaluated.
文摘Hexakis(4-methoxyphenyl)benzene (HPB-OMe(1)) and hexakis(2,6-dimethyl-4-methoxyphenyl)benzene (HPB-OMe(2)) were synthesized via organometallic complex catalysis. The treatment of HPB-OMe(1) with FeCl3 caused cyclodehydrogenation at two positions to yield an oligophenylene with an indeno[1,2-b]fluorene structure (IF-OMe). Deprotection of the methoxy groups of these compounds was conducted by treatment with BBr3. Deprotonation of the OH groups of HPB-OH(1), HPB-OH(2), and IF-OH through treatment with NaH caused a bathochromic shift in the absorption and photoluminescence (PL) peaks. The bathochromic shift of the deprotonated species increased with the donor number (DN) of the solvents. These observations can be explained as the consequence of intramolecular charge transfer (ICT) from the ONa groups to the inner benzene rings.
文摘Alternating copolymerization of 9,9-dihexyl-2,7-dibromofluorene, N-hexyl-2,7-dibromocarbazole (HCz) with diethynyldimethylsilane, diethynyldiphenylsilane, has been investigated using Sonogashira coupling reaction. Photophysical properties of the resulting copolymers were investigated with UV-Vis absorption and photoluminescence spectroscopy. All the copolymers in chloro-form solution showed absorption peaks at 270 - 280 nm with shoulder peaks at around 380 nm derived from π-π* transition or intra-molecular charge transfer through σ-π moiety, respectively. The chloroform solutions of the copolymers showed broad emission peaks at 415 - 425 nm. The emission wave lengths of the copolymers in the solid state (cast film) detected at 360 - 385 nm were remarkably blue-shifted in comparison with those in the chloroform solutions. Hydrosilylation reaction of the copolymers with 1,4-bis(dimethylsilyl)benzene yielded networked copolymers soluble in chloroform, indicating formation of branching polymers. The chloroform solutions of the HCz-based networked copolymers showed bimodal emission derived from new highly energy states in the σ-π conjugation.
基金supported by the National Natural Science Foundation of China(Nos.22105099 and 61874053)Natural Science Foundation of Jiangsu Province(No.BK20200700)+2 种基金the China Postdoctoral Science Foundation(No.2022M711591)the open research fund from Anhui Province Key Laboratory of Optoelectronic Materials Science and Technology(No.OMST202101)the State Key Laboratory of Luminescent Materials and Devices(South China University of Technology).
文摘π-Electron coupling of pendant conjugated segment inπ-stacked semiconducting polymers always causes the formation of defect trapped sites and further quenched high-band excitons,which is harmful to the performance and stability of deep-blue polymer light-emitting diodes(PLEDs).Herein,considerate of“defect”carbazole(Cz)electromers in poly(N-vinylcarbazole)(PVK),a series of fluorene units are introduced into pendant segments(PVCz-DMeF,PVCz-FMeNPh and PVCz-DFMeNPh)to suppress the strongπ-electron coupling of pendant Cz units and enhance radiative transition toward fabricating sable PLEDs.Compared to PVCz-FMeNPh and PVCz-DFMeNPh,PVCz-DMeF spin-coated films show a relatively efficient deep-blue emission,completely similar to its single pendant chromophore,confirmed an extremely weak charge-transfer and electron coupling between adjacent pendant segments.Therefore,PLEDs based on PVCz-DMeF present stable and deep-blue emission with a high color purity(0.17,0.08),associated with extremely weak defect emission at 600∼700nm(induced by carbazole electromers).Finally,PLEDs based on PVCz-DMeF/F8BT blended films(1:1)also present the high maximum luminance(Lmax)of 6261 cd/m2 and current efficiency(CE_(max))of 2.03 cd/A,confirmed slightly trapped sites formation.Therefore,precisely control the arrangement and packing model of pendant units inπ-stacked polymer is an essential prerequisite for building efficient and stable emitter for optoelectronic devices.
基金the National Natural Science Foundation of China(21774061,2207112 and 61935017)Natural Science Foundation major research program integration project(Grant Number 91833306)+1 种基金Six Peak Talents Foundation of Jiangsu Province(XCLCXTD-009)Open Project from State Key Labor-atory of Supramolecular Structure and Materials at Jilin University(No.sklssm202014).
文摘As a novel class of spirofluorenes,spirobifluorene(SBF)and spiro[fluo-rene-9,9'-xanthene]derivatives(SFXs)have orthogonal geometric config-uration,spiro-conjugation effect,and rigid steric hindrance,which can be widely used in the fields of synthetic chemistry,materials chemistry and supramolecular chemistry.Due to their facile one-pot synthetic route,and to the variety of molecular designs,SFXs are expected to become new spiro functional materials that replace SBF.In this review,we present the history,development and expansion of SFXs synthesis in one-pot methods,and the advantages and limitations of one-pot synthesis are also dis-cussed.
基金financial support by the National 973 Program of China (No. 2014CB643605)the National Natural Science Foundation of China (Nos. 51373204 and 51873239)+3 种基金the Science and Technology Project of Guangdong Province (Nos. 2015B090915003 and 2015B090913003)the China Postdoctoral Science Foundation (No. 2017M612801)the Leading Scientific, Technical and Innovation Talents of Guangdong Special Support Program (No. 2016TX03C295)the Fundamental Research Funds for the Central Universities (No. 161gzd08)
文摘A diamine(WuFDA) containing vertical rigid non-planar conjugated fluorene moiety and low polarizability group(C―F)was designed and synthesized through three steps of reactions(halogenated reaction, Suzuki coupling reaction, and reduction reaction).Four kinds of high performance functional polyimides(WuFPI-6 F, WuFPI-BP, WuFPI-BT, and WuFPI-PM) were thus prepared by the condensation polymerization of WuFDA with four commercial dianhydride 6 FDA, BPDA, BTDA, and PMDA, respectively. The polyimides exhibited low dielectric constant, excellent thermal stability, outstanding solubility, good film-forming property, and mechanical properties. The dielectric constants of the polyimides were in the range of 2.28-2.88(f = 10~4 Hz). The 5% weight-loss temperatures(Td 5%)in nitrogen were in the range of 555-584 °C, and the glass transition temperatures(T_g) were in the range of 408-448 °C. The weight loss of WuFPI-BP maintaining at 450 and 500 °C for half an hour was only 0.33% and 1.26%, respectively. All the WuFPIs could be dissolved in almost all organic solvents, even chloroform. The tensile strength and tensile modulus of these films were in the ranges of 78.6-85.7 MPa and 3.1-3.2 GPa, respectively. In addition, the polyimides displayed light color with special fluorescent and resistive switching(ON-OFF) characteristics; the maximum fluorescence emission was observed at 422-424 nm in NMP solution and at 470-548 nm in film state. The memory devices with the configuration of indium tin oxide/WuFPIs/aluminum(ITO/WuFPIs/Al) exhibited distinct volatile memory characteristics of static random access memory(SRAM), with an ON/OFF current ratio of 10~5-10~6. These functional polyimides showed attractive potential applications in the field of high performance flexible polymer photoelectronic devices or polymer memory devices.
基金the National Natural Science Foundation of China(Grant Nos:90406021,20774043and20574012)Natural Science Foundation of Jiangsu College Council(Grant No:KJD150148)Scientific Research Foundation of Nanjing University of Posts and Telecommunications(Grant No:NY206069)
文摘On account of the advantages of organic electroluminescent materials compared with their inorganic counterparts,the development of organic electroluminescent materials is one of the hot areas of the optoelectronic materials.Fluorene and its derivatives,which have an aromatic biphenyl structure with a wide energy gap in the backbones and high luminescent efficiency,have drawn much attention of ma-terial chemists and device physicists.However,one drawback of fluorene-based electroluminescent blue materials is that there is an occurrence of long wavelength emission after annealing the films in air or after operating organic light-emitting diodes for a long time.To clarify the origin of this long wave-length emission,the scientists at home and abroad have put forward all kinds of correlative explana-tions.Among the scientists,some thought it was caused by excimer-related species,while some others claimed that it was caused by the fluorenone of photooxdized fluorene.The corresponding solutions to this problem have also been proposed and the problem has been partially resolved in some degree.The present review summarizes and analyzes the progress made on the origin of long wavelength emission in fluorene-based electroluminescent blue materials at home and abroad in the past few years.Some issues to be addressed and hotspots to be further investigated are also presented and discussed.
基金supported by the National Natural Science Foundation of China(Nos.51873104 and 51011120100)
文摘A novel fluorene-bridged tetraketone monomer,9,9-bis[(4-benzilyloxy)phenyl]fluorene(FLTK) was synthesized and characterized.The tetraketone was polymerized with various aromatic tetraamines to afford a series of polyphenylquinoxalines(PPQs).The obtained polymers were found to be soluble in common organic solvents such as N-methyl-2-pyrrolidone(NMP),chloroform and m-cresol.Flexible and tough PPQ films obtained by spin-casting their NMP solutions exhibited tensile strengths higher than 60 MPa.The films also demonstrated good thermal stability up to 500℃in nitrogen and glass transition temperatures higher than 280℃.In addition,the PPQ films exhibited good hydrolytic stability. High surface and volume resistivity retentions were achieved for the films after immersion or boiling in water for 24 h.
基金Supported by the National Natural Science Foundation of China (Grant Nos. 20674004, 60776039, 60825407 & 10434030)Beijing Commission of Education (Grant No. KM200710015009)+2 种基金Beijing Sustentation Fund for Elitist (Grant No. 20041D0500410)Laboratory of Printing and Packaging Material and Technology and Beijing Area Major Laboratory Project (Grant No. KF200811)BJTU Fund (Grant No. 2006XM043)
文摘A fluorescent organic triarylamine with a symmetric structure, 2,7-bis(N-α-naphthyl-phenylamino)-9,9- diethylfluorene (NPAEF) was synthesized using two methods, modified Ullmann coupling and modified palladium-catalyzed amination. An activated copper and a combination of Pd(OAc)2/P(t-Bu)3 and Pd(dba)2/P(t-Bu)3 were selected as catalysts to improve yields of reactions. These synthetic procedures were also successfully applied to an asymmetric 2-dimesitylboron-7-(N-phenyl-α-naphthylamino)-9,9-diethylfluorene (BNPEF). Photoluminescent emission peaks in solid film and in diluted solution of NPAEF were both observed at 461 nm, while the main emission peaks of BNPEF appeared at 422 nm in hexane, and at 480 nm in methanol. The double emission peaks of BNPEF in hexane reflected fine structure in the vibrational state. With an increasing polarity of solvent, the main PL emission peaks were red-shifted and vibrational fine structure disappeared. Additionally, energy levels of NPAEF were investigated and an electroluminescence (EL) device of ITO/PVK:NPAEF/Al was fabricated, which showed a turn-on voltage of 9 V and peaked at 462 nm. The EL spectrum was in good agreement with PL spectrum, which indicated that they were from the same emitting center in the device.