Electrochemical behaviors of Mg^(2+) and B^(3+) deposition in fluoride molten salts

By using cyclic and linear sweep voltammetry,the electrochemical deposition behaviors of Mg^2＋ and B^3＋ in fluorides molten salts of KF-MgF2 and KF-KBF4 at 880℃ were investigated,respectively.The results show that the electrochemical reduction of Mg^2＋ is a one-step reaction as Mg^2＋＋2e-→Mg in KF-1%MgF2 molten salt,and the electrochemical reduction of B^3＋ is also a one-step reaction as B^3＋＋3e-→B in KF-KBF4 （1%,2% KBF4） molten salts.Both the cathodic reduction reactions of Mg^2＋ and B^3＋ are controlled by diffusion process.The diffusion coefficients of Mg^2＋ in KF-MgF2 molten salts and B^3＋ in KF-KBF4 molten salts are 6.8×10^-7 cm^2/s and 7.85×10^-7 cm^2/s,respectively.Moreover,the electrochemical synthesis of MgB2 by co-deposition of Mg and B was carried out in the KF-MgF2-KBF4 （molar ratio of 6：1：2） molten salt at 750℃.The X-ray diffraction analysis indicates that MgB2 can be deposited on graphite cathode in the KF-MgF2-KBF4 molten salt at 750℃.

Numerical and experimental investigation of a new conceptual fluoride salt freeze valve for thorium-based molten salt reactor

To improve the reliability and reduce energy consumption,a conceptual design of a freeze valve is proposed for the thorium-based molten salt reactor(TMSR)concept.Fins were utilized in this new design to enhance heat transfer and realize passive shut-off function,which could not be realized by the previous design.An experimental apparatus using the fluoride salt FLiNaK was constructed to conduct a series of preliminary solidification and melting experiments.In addition,the enthalpy-porosity method of ANSYS■Fluent solver was applied to simulate the solidification process of the salt at a specified operating temperature.Temperature distributions of the fluoride salt,solidification/melting time,and frozen plug effect were analyzed under natural convection heat transfer in an open space.The calculated salt temperatures exhibited good agreement with the experimental values.The results indicated that the range of effective operating temperature is 530-600℃ for the finned freeze valve.In this study,the ideal set operating temperature of the finned freeze valve was chosen as 560℃ to achieve competent performance.Moreover,560℃ is additionally the highest set operating temperature for maintaining excellent cooling performance and sustaining deep-frozen condition of the salt plug.At this set operating temperature,the simulation data indicated that the molten salt in the flat part of the finned freeze valve will completely solidify at 10.5 min.The percentage of solid salt in the flat and lower transitional parts of the valve reaches 29.60% in 30.0 min.Furthermore,the surface temperature of the proposed freeze valve is 11.10% lower compared with that of the TMSR freeze valve at a cooling gas supply of 173 m^3/h.Therefore,the new freeze valve was proven to be capable of reducing the energy consumption and realizing the passive shut-off function.

Process optimization of a closed-chamber distillation system for the recovery of FLiNaK molten salt

Low-pressure distillation has been proposed as a suitable technique for the recovery of carrier salt from molten salt reactor spent fuel.A closed-chamber distillation system,in which the pump is stopped and pressureinduced salt distillation is performed,was arranged for fluoride salt treatment.A stair-step optimization process was demonstrated to improve the recovery efficiency by up to 99%.The pressure change curve was feasible for estimating the distillation process,and a method for displaying the pressure value online in order to determine the endpoint was also developed.The decontamination factor of Nd in the condensate salt was deduced to be greater than 100 with 1 wt%NdF3–FLiNaK distillation.The optimal conditions developed in this study showed a high recovery ratio for the fluoride carrier salt and a high separation efficiency for rare earth products.

Neutronic study on the effect of first wall material thickness on tritium production and material damage in a fusion reactor

In this study,the effects of changing first wall materials and their thicknesses on a reactor were investigated to determine the displacement per atom(DPA)and gas production(helium and hydrogen)in the first wall,as well as the tritium breeding ratio(TBR)in the coolant and tritium breeding zones.Therefore,the modeling of the magnetic fusion reactor was determined based on the blanket parameters of the International Thermonuclear Experimental Reactor(ITER).Stainless steel(SS 316 LNIG),Oxide Dispersion Strengthened Steel alloy(PM2000 ODS),and China low-activation martensitic steel(CLAM)were used as the first wall(FW)materials.Fluoride family molten salt materials(FLiBe,FLiNaBe,FLiPb)and lithium oxide(LiO_(2))were considered the coolant and tritium production material in the blanket,respectively.Neutron transport calculations were performed using the wellknown 3D code MCNP5 using the continuous-energy Monte Carlo method.The built-in continuous energy nuclear and atomic data libraries along with the Evaluated Nuclear Data file(ENDF)system(ENDF/B-V and ENDF/B-VI)were used.Additionally,the activity cross-section data library CLAW-IV was used to evaluate both the DPA values and gas production of the first wall(FW)materials.An interface computer program written in the FORTRAN 90 language to evaluate the MCNP5 outputs was developed for the fusion reactor blanket.The results indicated that the best TBR value was obtained for the use of the FLiPb coolant,whereas depending on the thickness,the first wall replacement period in terms of radiation damage to all materials was between 6 and 11 years.

Electrochemical co-reduction of Y(Ⅲ)and Al(Ⅲ)in a fluoride molten salt system and electrolytic preparation of Y-Al intermediate alloys

In this study,a molten salt co-reduction method was proposed for preparing Y-Al intermediate alloys and the electrochemical co-reduction behaviors of Y(Ⅲ)and Al(Ⅲ)and the reaction mechanism of intermetallic compound formation were investigated by transient electrochemical techniques.The results show that the reduction of Y(Ⅲ)at the Mo electrode is a reversible electrochemical process with a single-step transfer of three electrons,which is controlled by the mass transfer rate.The diffusion coefficient of Y(Ⅲ)in the fluoride salt at a temperature of 1323 K is 5.0238×10^(-3)cm^(2)/s.Moreover,the thermodynamic properties associated with the formation of Y-Al intermetallic compounds were estimated using a steady-state electrochemical method.Y-Al intermediate alloy containing 92 wt%yttrium was prepared by constant current electrolysis at 1323 K in the LiF-YF_(3)-AIF_(3)-Y_(2)O_(3)(6 wt%)-Al_(2)O_(3)(1 wt%)system at a cathodic current density of 8 A/cm^(2)for 2 h.The Y-Al intermediate alloy is mainly composed ofα-Y2Al and Y phases.The development and application of this innovative technology have solved major technical problems,such as a long production process,high energy consumption,and serious segregation of alloy elements at this stage.