Medical-grade poly(methyl methacrylate) (PMMA) is extensively employed in the fabrication of a variety of medical implants, including intraocular lenses (IOLs). However, a postoperative complication that leads to the ...Medical-grade poly(methyl methacrylate) (PMMA) is extensively employed in the fabrication of a variety of medical implants, including intraocular lenses (IOLs). However, a postoperative complication that leads to the failure of the implanted intraocular lenses has been recently identified. This process, termed calcification, occurs when calcium-containing deposits accumulate on the surface of the IOL. In this study direct gas fluorination was used to modify the surface of PMMA in an attempt to increase the service lifetime of the material in optical applications. PMMA discs exposed to a 20% fluorine/nitrogen gas mixture for 24 h were compared with untreated PMMA discs serving as control samples. Over time, both surface-fluorinated and untreated PMMA samples immersed in a simulated aqueous humour solution (SAHS) (pH 7.4, 35°C) were used to carry out in vitro studies. Attenuated total refractive Infrared spectroscopy (ATR-IR) Scanning electron microscopy (SEM), coupled with Energy dispersive X-ray analysis (EDX), showed that calcium-containing surface deposits were less abundant on surface-fluorinated PMMA compared with the control samples, indicating that the fluorinated surface was acting as a barrier to the deposits. Gravimetric analysis data showed that the decreased rate of diffusion compared with that of a control sample was due to the fluorinated surface.展开更多
Well-defined nonionic hydrophilic ω-acryloyl poly(ethylene oxide) macro-monomer (PEO-A) has been prepared by living anionic polymerization of ethylene oxidewith diphenyl methyl potassium as the initiator and acryloyl...Well-defined nonionic hydrophilic ω-acryloyl poly(ethylene oxide) macro-monomer (PEO-A) has been prepared by living anionic polymerization of ethylene oxidewith diphenyl methyl potassium as the initiator and acryloyl chloride as the reaction termi-nating agent. The polymer was characterized by FTIR and SEC. The emulsifier-free emul-sion polymerization of methyl methacrylate (MMA) and n-butyl acrylate (BA) containingvarious concentrations of PEO-A was studied. In all cases stable emulsion coplymerizationsof MMA and BA were obtained. The stabilizing effect was found to be dependent on themolecular weight and the feed amount of the macromonomer.展开更多
Nanostructure fabrication from block copolymers in my group normally involves polymer design, synthesis, self-assembly, selective domain crosslinking, and sometimes selective domain removal. Preparation of thin films ...Nanostructure fabrication from block copolymers in my group normally involves polymer design, synthesis, self-assembly, selective domain crosslinking, and sometimes selective domain removal. Preparation of thin films withnanochannels was used to illustrate the strategy we took. In this particular case, a linear triblock copolymer polyisoprenc-block-poly(2-cinnamoylethyl methacrylate)-block-poly(t-butyl acrylate), PI-b-PCEMA-b-PtBA, was used. Films, 25 to50 μm thick, were prepared from casting on glass slides a toluene solution of PI-b-PCEMA-b-PtBA and PtBA homopolymer,hPtBA, where hPtBA is shorter than the PtBA block. At the hPtBA mass faction of 20% relative to the triblock or the totalPtBA (hPtBA and PtBA block) volume fraction of 0.44, hPtBA and PtBA formed a seemingly continuous phase in the matrixof PCEMA and Pl. Such a block segregation pattern was locked in by photocrosslinking the PCEMA domain. Nanochannelswere formed by extracting out hPtBA with solvent. Alternatively. larger channels were obtained from extracting out hPtBAand hydrolyzing the t-butyl groups of the PtBA block. Such membranes were not liquid permeable but had gas permeabilityconstants ～6 orders of magnitude higher than that of low-density polyethylene films.展开更多
A cup shape is a dynamic morphology of cells and organelles. With the aim of elucidating the formation of the biotic cup-shaped morphology, this study investigated cup-shaped vesicles consisting of an amphiphilic dibl...A cup shape is a dynamic morphology of cells and organelles. With the aim of elucidating the formation of the biotic cup-shaped morphology, this study investigated cup-shaped vesicles consisting of an amphiphilic diblock copolymer from the aspect of synthetic polymer chemistry. Cup-shaped vesicles were obtained by the polymerization-induced self-assembly of poly(methacrylic acid)-block-poly(n-butyl methacrylate-random-methacrylic acid), PMAA-b-P(BMA-r-MAA), in an aqueous methanol solution using the photo nitroxide-mediated controlled/living radical polymerization technique. Field emission scanning electron microscopic observations demonstrated that the cup-shaped vesicles were suddenly formed during the late stage of the polymerization due to the extension of the hydrophobic P(BMA-r-MAA) block chain. During the early stage, the polymerization produced spherical vesicles rather than a cup shape. As the hydrophobic block chain was extended by the polymerization progress, the spherical vesicles reduced the size and were accompanied by the generation of small particles that were attached to the vesicles. The vesicles continued to reduce the size due to further extension of the hydrophobic chain;however, they suddenly grew into cup-shaped vesicles. This growth was accounted for by a change in the critical packing shape of the copolymer due to the hydrophobic chain extension. These findings are helpful for a better understanding of the biotic cup-shaped vesicle formation.展开更多
Polypropylene/poly（butyl methacrylate） （PP/PBMA） blends were prepared by diffusion and subseqtuent polymerization＇of butyl methacrylate （BMA） in commercial isotactic polypropylene （iPP） pellets. The diffusion...Polypropylene/poly（butyl methacrylate） （PP/PBMA） blends were prepared by diffusion and subseqtuent polymerization＇of butyl methacrylate （BMA） in commercial isotactic polypropylene （iPP） pellets. The diffusion kinetics, diametrical distribution of PBMA in a pellet and phase morphology of a typical PP/PBMA blend were investigated.展开更多
文摘Medical-grade poly(methyl methacrylate) (PMMA) is extensively employed in the fabrication of a variety of medical implants, including intraocular lenses (IOLs). However, a postoperative complication that leads to the failure of the implanted intraocular lenses has been recently identified. This process, termed calcification, occurs when calcium-containing deposits accumulate on the surface of the IOL. In this study direct gas fluorination was used to modify the surface of PMMA in an attempt to increase the service lifetime of the material in optical applications. PMMA discs exposed to a 20% fluorine/nitrogen gas mixture for 24 h were compared with untreated PMMA discs serving as control samples. Over time, both surface-fluorinated and untreated PMMA samples immersed in a simulated aqueous humour solution (SAHS) (pH 7.4, 35°C) were used to carry out in vitro studies. Attenuated total refractive Infrared spectroscopy (ATR-IR) Scanning electron microscopy (SEM), coupled with Energy dispersive X-ray analysis (EDX), showed that calcium-containing surface deposits were less abundant on surface-fluorinated PMMA compared with the control samples, indicating that the fluorinated surface was acting as a barrier to the deposits. Gravimetric analysis data showed that the decreased rate of diffusion compared with that of a control sample was due to the fluorinated surface.
文摘Well-defined nonionic hydrophilic ω-acryloyl poly(ethylene oxide) macro-monomer (PEO-A) has been prepared by living anionic polymerization of ethylene oxidewith diphenyl methyl potassium as the initiator and acryloyl chloride as the reaction termi-nating agent. The polymer was characterized by FTIR and SEC. The emulsifier-free emul-sion polymerization of methyl methacrylate (MMA) and n-butyl acrylate (BA) containingvarious concentrations of PEO-A was studied. In all cases stable emulsion coplymerizationsof MMA and BA were obtained. The stabilizing effect was found to be dependent on themolecular weight and the feed amount of the macromonomer.
文摘Nanostructure fabrication from block copolymers in my group normally involves polymer design, synthesis, self-assembly, selective domain crosslinking, and sometimes selective domain removal. Preparation of thin films withnanochannels was used to illustrate the strategy we took. In this particular case, a linear triblock copolymer polyisoprenc-block-poly(2-cinnamoylethyl methacrylate)-block-poly(t-butyl acrylate), PI-b-PCEMA-b-PtBA, was used. Films, 25 to50 μm thick, were prepared from casting on glass slides a toluene solution of PI-b-PCEMA-b-PtBA and PtBA homopolymer,hPtBA, where hPtBA is shorter than the PtBA block. At the hPtBA mass faction of 20% relative to the triblock or the totalPtBA (hPtBA and PtBA block) volume fraction of 0.44, hPtBA and PtBA formed a seemingly continuous phase in the matrixof PCEMA and Pl. Such a block segregation pattern was locked in by photocrosslinking the PCEMA domain. Nanochannelswere formed by extracting out hPtBA with solvent. Alternatively. larger channels were obtained from extracting out hPtBAand hydrolyzing the t-butyl groups of the PtBA block. Such membranes were not liquid permeable but had gas permeabilityconstants ～6 orders of magnitude higher than that of low-density polyethylene films.
文摘A cup shape is a dynamic morphology of cells and organelles. With the aim of elucidating the formation of the biotic cup-shaped morphology, this study investigated cup-shaped vesicles consisting of an amphiphilic diblock copolymer from the aspect of synthetic polymer chemistry. Cup-shaped vesicles were obtained by the polymerization-induced self-assembly of poly(methacrylic acid)-block-poly(n-butyl methacrylate-random-methacrylic acid), PMAA-b-P(BMA-r-MAA), in an aqueous methanol solution using the photo nitroxide-mediated controlled/living radical polymerization technique. Field emission scanning electron microscopic observations demonstrated that the cup-shaped vesicles were suddenly formed during the late stage of the polymerization due to the extension of the hydrophobic P(BMA-r-MAA) block chain. During the early stage, the polymerization produced spherical vesicles rather than a cup shape. As the hydrophobic block chain was extended by the polymerization progress, the spherical vesicles reduced the size and were accompanied by the generation of small particles that were attached to the vesicles. The vesicles continued to reduce the size due to further extension of the hydrophobic chain;however, they suddenly grew into cup-shaped vesicles. This growth was accounted for by a change in the critical packing shape of the copolymer due to the hydrophobic chain extension. These findings are helpful for a better understanding of the biotic cup-shaped vesicle formation.
基金support from the National Natural Science Foundation of China (No.51173095)
文摘Polypropylene/poly（butyl methacrylate） （PP/PBMA） blends were prepared by diffusion and subseqtuent polymerization＇of butyl methacrylate （BMA） in commercial isotactic polypropylene （iPP） pellets. The diffusion kinetics, diametrical distribution of PBMA in a pellet and phase morphology of a typical PP/PBMA blend were investigated.
