Unique double-layer solid electrolyte interphase formed with fluorinated ether-based electrolytes for high-voltage lithium metal batteries

Li metal batteries using high-voltage layered oxides cathodes are of particular interest due to their high energy density.However,they suffer from short lifespan and extreme safety concerns,which are attributed to the degradation of layered oxides and the decomposition of electrolyte at high voltage,as well as the high reactivity of metallic Li.The key is the development of stable electrolytes against both highvoltage cathodes and Li with the formation of robust interphase films on the surfaces.Herein,we report a highly fluorinated ether,1,1,1-trifluoro-2-[(2,2,2-trifluoroethoxy)methoxy]ethane(TTME),as a cosolvent,which not only functions as a diluent forming a localized high concentration electrolyte(LHCE),but also participates in the construction of the inner solvation structure.The TTME-based electrolyte is stable itself at high voltage and induces the formation of a unique double-layer solid electrolyte interphase(SEI)film,which is embodied as one layer rich in crystalline structural components for enhanced mechanical strength and another amorphous layer with a higher concentration of organic components for enhanced flexibility.The Li||Cu cells display a noticeably high Coulombic efficiency of 99.28%after 300 cycles and Li symmetric cells maintain stable cycling more than 3200 h at 0.5 mA/cm^(2) and 1.0m Ah/cm^(2).In addition,lithium metal cells using LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) and Li CoO_(2) cathodes(both loadings~3.0 m Ah/cm^(2))realize capacity retentions of>85%over 240 cycles with a charge cut-off voltage of 4.4 V and 90%for 170 cycles with a charge cut-off voltage of 4.5 V,respectively.This study offers a bifunctional ether-based electrolyte solvent beneficial for high-voltage Li metal batteries.

Lithium-ion and solvent co-intercalation enhancing the energy density of fluorinated graphene cathode

Fluorinated carbons CF_xhold the highest theoretical energy density(e.g.,2180 W h kg^(-1)when x=1)among all cathode materials of lithium primary batteries.However,the low conductivity and severe polarization limit it to achieve its theory.In this study,we design a new electrolyte,namely 1 M LiBF_(4)DMSO:DOL(1:9 vol.),achieving a high energy density in Li/CF_xprimary cells.The DMSO with a small molecular size and high donor number successfully solvates Li^(+)into a defined Li^(+)-solvation structure.Such solvated Li^(+)can intercalate into the large-spacing carbon layers and achieve an improved capacity.Consequently,when discharged to 1.0 V,the CF_(1.12)cathode demonstrates a specific capacity of 1944 m A h g^(-1)with a specific energy density of 3793 W h kg^(-1).This strategy demonstrates that designing the electrolyte is powerful in improving the electrochemical performance of CF_(x) cathode.

All-fluorinated electrolyte for non-flammable batteries with ultra-high specific capacity at 4.7 V

Li metal batteries(LMBs)with LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2)(NMC811)cathodes could release a specific energy of>500 Wh kg^(-1) by increasing the charge voltage.However,high-nickel cathodes working at high voltages accelerate degradations in bulk and at interfaces,thus significantly degrading the cycling lifespan and decreasing the specific capacity.Here,we rationally design an all-fluorinated electrolyte with addictive tri(2,2,2-trifluoroethyl)borate(TFEB),based on 3,3,3-fluoroethylmethylcarbonate(FEMC)and fluoroethylene carbonate(FEC),which enables stable cycling of high nickel cathode(LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2),NMC811)under a cut-off voltage of 4.7 V in Li metal batteries.The electrolyte not only shows the fire-extinguishing properties,but also inhibits the transition metal dissolution,the gas production,side reactions on the cathode side.Therefore,the NMC811||Li cell demonstrates excellent performance by using limited Li and high-loading cathode,delivering a specific capacity>220 mA h g^(-1),an average Coulombic efficiency>99.6%and capacity retention>99.7%over 100 cycles.

Thermal Runaway of Lithium-Ion Batteries Employing Flame-Retardant Fluorinated Electrolytes

Fluorinated electrolytes possess good antioxidant capacity that provides high compatibility to high-voltage cathode and flame retardance;thus,they are considered as a promising solution for advanced lithium-ion batteries carrying both high-energy density and high safety.Moreover,the fluorinated electrolytes are widely used to form stable electrolyte interphase,due to their chemical reactivity with lithiated graphite or lithium.However,the influence of this reactivity on the thermal safety of batteries is seldom discussed.Herein,we demonstrate that the flame-retardant fluorinated electrolytes help to reduce the flammability,while the lithium-ion batteries with flame-retardant fluorinated electrolytes still undergo thermal runaway and disclose their different thermal runaway pathway from that of battery with conventional electrolyte.The reduction in fluorinated components(e.g.,LiPF 6 and fluoroethylene carbonate(FEC))by fully lithiated graphite accounts for a significant heat release during battery thermal runaway.The 13%of total heat is sufficient to trigger the chain reactions during battery thermal runaway.This study deepens the understanding of the thermal runaway mechanism of lithium-ion batteries employing flame-retardant fluorinated electrolytes,providing guidance on the concept of electrolyte design for safer lithium-ion batteries.

Fluorinated soft carbon as an ultra-high energy density potassium-ion battery cathode enabled by a ternary phase K_(x)FC

Fluorinated carbons(CFx)have been widely applied as lithium primary batteries due to their ultra-high energy density.It will be a great promise if CFx can be rechargeable.In this study,we rationally tune the C-F bond strength for the alkaline intercalated CFx via importing an electronegative weaker element K instead of Li.It forms a ternary phase K_(x)FC instead of two phases(LiF+C)in lithium-ion batteries.Meanwhile,we choose a large layer distance and more defects CFx,namely fluorinated soft carbon,to accommodate K.Thus,we enable CFx rechargeable as a potassium-ion battery cathode.In detail fluorinated soft carbon CF_(1.01) presents a reversible specific capacity of 339 mA h g^(-1)(797 Wh kg^(-1))in the 2nd cycle and maintains 330 mA h g^(-1)(726 Wh kg^(-1))in the 15th cycle.This study reveals the importance of tuning chemical bond stability using different alkaline ions to endow batteries with rechargeability.This work provides good references for focusing on developing reversible electrode materials from popular primary cell configurations.

Fluoridation routes,function mechanism and application of fluorinated/fluorine-doped nanocarbon-based materials for various batteries:A review

With the popularity and widespread applications of electronics,higher demands are being placed on the performance of battery materials.Due to the large difference in electronegativity between fluorine and carbon atoms,doping fluorine atoms in nanocarbon-based materials is considered an effective way to improve the performance of used battery.However,there is still a blank in the systematic review of the mechanism and research progress of fluorine-doped nanostructured carbon materials in various batteries.In this review,the synthetic routes of fluorinated/fluorine-doped nanocarbon-based(CF_x)materials under different fluorine sources and the function mechanism of CF_x in various batteries are reviewed in detail.Subsequently,judging from the dependence between the structure and electrochemical performance of nanocarbon sources,the progress of CF_x based on different dimensions(0D–3D)for primary battery applications is reviewed and the balance between energy density and power density is critically discussed.In addition,the roles of CF_x materials in secondary batteries and their current applications in recent years are summarized in detail to illustrate the effect of introducing F atoms.Finally,we envisage the prospect of CF_x materials and offer some insights and recommendations to facilitate the further exploration of CF_x materials for various high-performance battery applications.

Enhanced surface-insulating performance of EP composites by doping plasmafluorinated ZnO nanofiller

The surface flashover of epoxy resin(EP) composites is a pivotal problem in the field of highvoltage insulation.The regulation of the interface between the filler and matrix is an effective means to suppress flashover.In this work,nano ZnO was fluorinated and grafted using lowtemperature plasma technology,and the fluorinated filler was doped into EP to study the DC surface flashover performance of the composite.The results show that plasma fluorination can effectively inhibit the agglomeration by grafting –CFxgroups onto the surface of nano-ZnO particles.The fluorine-containing groups at the interface provide higher charge binding traps and enhance the insulation strength at the interface.At the same time,the interface bond cooperation caused by plasma treatment also promoted the accelerating effect of nano ZnO on charge dissipation.The two effects synergistically improve the surface flashover performance of epoxy composites.When the concentration of fluorinated ZnO filler is 20%,the flashover voltage has the highest increase,which is 31.52% higher than that of pure EP.In addition,fluorinated ZnO can effectively reduce the dielectric constant and dielectric loss of epoxy composites.The interface interaction mechanism was further analyzed using molecular dynamics simulation and density functional theory simulation.

Fluorine-Modulated MXene-Derived Catalysts for Multiphase Sulfur Conversion in Lithium-Sulfur Battery

Fluorine owing to its inherently high electronegativity exhibits charge delocalization and ion dissociation capabilities;as a result,there has been an influx of research studies focused on the utilization of fluorides to optimize solid electrolyte interfaces and provide dynamic protection of electrodes to regulate the reaction and function performance of batteries.Nonetheless,the shuttle effect and the sluggish redox reaction kinetics emphasize the potential bottlenecks of lithium-sulfur batteries.Whether fluorine modulation regulate the reaction process of Li-S chemistry?Here,the TiOF/Ti_(3)C_(2)MXene nanoribbons with a tailored F distribution were constructed via an NH4F fluorinated method.Relying on in situ characterizations and electrochemical analysis,the F activates the catalysis function of Ti metal atoms in the consecutive redox reaction.The positive charge of Ti metal sites is increased due to the formation of O-Ti-F bonds based on the Lewis acid-base mechanism,which contributes to the adsorption of polysulfides,provides more nucleation sites and promotes the cleavage of S-S bonds.This facilitates the deposition of Li_(2)S at lower overpotentials.Additionally,fluorine has the capacity to capture electrons originating from Li_(2)S dissolution due to charge compensation mechanisms.The fluorine modulation strategy holds the promise of guiding the construction of fluorine-based catalysts and facilitating the seamless integration of multiple consecutive heterogeneous catalytic processes.

Illuminating β-arrestin conformational dynamics by fluorine NMR

In a recent paper, solution-state ^(19)F NMR spectroscopy was used to probe the conformational dynamics of β-arrestin-1, an essential adaptor and signaling component of the G-protein couple receptor (GPCR) signaling pathway. This work reveals a highly complex conformational energy landscape of β-arrestin-1, and illuminates the molecular mechanism of the membrane phosphoinositide PIP2-induced β-arrestin-1 activation at residue level.(https://doi.org/10.1038/s41467-023-43694-1).

Selective oxidation of ethylbenzene catalyzed by fluorinated metalloporphyrins with molecular oxygen

This paper reported the oxidation of ethylbenzene catalyzed by fluorinated metalloporphyrins under mild conditions without any additives. The results showed that the cobalt(II)(5,10,15,20-tetrakis(pentafluorophenyl))porphyrin was the best catalyst among the fluorinated metalloporphyrins. The conversion of ethylbenzene reached 38.6%, the selectivity to acetophenone reached 94.0%, and the turnover number is 2719 under the optimal conditions.

Exploring high-voltage fluorinated carbonate electrolytes for LiNi0.5Mn1.5O4 cathode in Li-ion batteries

Ethyl-(2,2,2-trifluoroethyl)carbonate(ETFEC)is investigated as a solvent component in high-voltage electrolytes for LiNi0.5Mn1.5O4(LNMO).Our results show that the self-discharge behavior and the high temperature cycle performance can be significantly improved by the addition of 10%ETFEC into the normal carbonate electrolytes,e.g.,the capacity retention improved from 65.3%to 77.1%after 200 cycles at 60℃.The main reason can be ascribed to the high stability of ETFEC which prevents large oxidation of the electrolyte on the cathode surface.In addition,we also explore the feasibility of electrolytes using single fluoriated-solvents with and without additives.Our results show that the cycle performance of LNMO material can be greatly improved in 1 MLiPF6+pure ETFEC-solvent system with 2 wt%ethylene carbonate(EC)or ethylene sulfate(DTD).The capacity retention of the LNMO materials is 93%after 300 cycles,even better than that of carbonate-based electrolytes.It is shown that the additives are oxidized on the surface of LNMO particles and contribute to the formation of cathode/electrolyte interphase(CEI)films.This composite CEI film plays a crucial role in suppressing the serious decomposition of the electrolyte at high voltage.

Recent progress in fluorinated electrolytes for improving the performance of Li–S batteries

Lithium–sulfur(Li–S) batteries represent a "beyond Li-ion" technology with low cost and high theoretical energy density and should fulfill the ever-growing requirements of electric vehicles and stationary energy storage systems. However, the sulfur-based conversion reaction in conventional liquid electrolytes results in issues like the so-called shuttle effect of polysulfides and lithium dendrite growth, which deteriorate the electrochemical performance and safety of Li–S batteries. Optimization of conventional organic solvents(including ether and carbonate) by fluorination to form fluorinated electrolytes is a promising strategy for the practical application of Li–S batteries. The fluorinated electrolytes, owing to the high electronegativity of fluorine, possesses attractive physicochemical properties, including low melting point,high flash point, and low solubility of lithium polysulfide, and can form a compact and stable solid electrolyte interphase(SEI) with the lithium metal anode. Herein, we review recent advancements in the development of fluorinated electrolytes for use in Li–S batteries. The effect of solvent molecular structure on the performance of Li–S batteries and the formation mechanism of SEI on the cathode and anode sides are analyzed and discussed in detail. The remaining challenges and future perspectives of fluorinated electrolytes for Li–S batteries are also presented.

Synthesis and characterization of fluorinated polyurethane with fluorine-containing pendent groups

A novel fluorinated polyurethane （FPU） with fluorine-containing pendent groups was prepared by using fluorinated polyether glycol （PTMG-g-HFP） as a soft segment, 1,6-hexamethylene diisocyanate （HDI） or toluene diisocyanate （TD1） as a hard segment and 1,4-butanodiol （BDO） as a chain extender. FTIR, ^1H NMR, ^13C NMR and GPC were used to characterize the structure of the fluorinated polyurethane. Thermal stabilities of the fluorinated polyurethane and the corresponding hydrogenated polyurethane were studied by TGA. XPS analysis at two different sampling depths for the fluorinated polyurethane was used to investigate the surface compositions of FPU. The results showed the fluorine enrichment on the surface of FPU.

Synthesis of New Fluorinated Podophyllotoxin Derivatives

Five fluorinated podophyllotoxin derivatives were synthesized using dimethylamino- sulfurtrifluoride (DAST).

LARGELY IMPROVED BLOOD COMPATIBILITY OF POLYURETHANE BY BLENDING WITH FLUORINATED PHOSPHATIDYLCHOLINE POLYURETHANE

The improvement of biocompatibility of polyurethanes was investigated.The results demonstrate that the blood compatibility of polyurethanes can be further improved by just simply mixing with the fluorinated phosphatidylcholine poly(carbonate urethane)s(FPCPCUs).The solution blending was done by mixing poly(ether urethane)(PEU)with FPCPCU in different compositions.An increased blood compatibility of the blend films was observed with the increase of FPCPCU content,and when FPCPCU content reached to 40 wt%(40F...

Synthesis and characterization of fluorinated PEO-b-PDMS-b-fluorinated PEO by free radical addition

Fluorinated poly（ethylene oxide） propyl-b-polydimethylsiloxane-b-propyl fluorinated poly（ethylene oxide） （FPEO-b-PDMS-b- FPEO） was synthesized by a free radical addition of carbon-hydrogen of polyether segments of poly（ethylene oxide） propyl-b- polydimethylsiloxane-b-propyl poty（ethylene oxide） （PEO-b-PDMS-b-PEO） to hexafluoropropylene （HFP） using tert-butyl peroxypivalate as an initiator. In order to reduce the possibility of side reaction, the protection and deprotection via silylation were used for the end-hydroxyls in PEO-b-PDMS-b-PEO chain. The structure of Intermediates and FPEO-b-PDMS-b-FPEO was confirmed by means of Fourier transform infrared and 1H NMR spectroscopy. The effects of amount of initiator, reaction temperature and time on free radical addition were investigated in detail. 2009 Xing Yuan Zhang. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.

Determination of fluorinated quinolone antibacterials by ion chromatography with fluorescence detection

For preparing fluorinated quinolone antibiotic medicine locally used in stomatology, simultaneous determination of norfloxacin, ciprofloxacin, and enoxacin was carried out by multiphase ion chromatography with fluorescence detection. Quinolone antibiotics were separated by Dionex OmniPac PAX-500 column with an eluent of 15 mmol/L H2SO4 and 35% methanol （v/v） at a flow-rate of 1.0 ml/min and detected with fluorescence with excitation and emission wave lengths of 347 ran and 420 ran respectively. The detection limits （S/N=3） of norfloxacin, ciprofloxacin and enoxacin were 50, 105 and 80 ng/ml respectively. The relative standard deviations of retention time, peak area and peak height were less than 1.1% and good linear relationship resulted. The developed method was applied to pharmaceutical formulations and biological fluids.

ORGANO-SOLUBLE FLUORINATED POLYIMIDES DERIVED FROM α,α-BIS(4-AMINO-3,5-DIMETHYLPHENYL)-4'-FLUOROPHENYL METHANE AND VARIOUS AROMATIC DIANHYDRIDES

Organo-soluble fluorinated polyimides were synthesized by the polycondensation of a new aromatic diamine α,α-bis(4-amino-3,5-dimethylphenyl)-4'-fluorophenyl methane with several aromatic dianhydrides.The one-step polymerizationprocedure was conducted at 180℃ in m-cresol,producing the polyimides with inherent viscosities of 0.68-0.76 dL.g^(-1).Thepolyimides could be soluble not only in polar aprotic solvents,such as N-methyl-2-pyrrolidinone,and N,N-dimethylacetamide,but also in common organic solvents,such as chloroform,cyclopentanone,m-cresol and so on.Thepolyimide films show excellent transparency with the UV-Vis cut-off lengths of 310-360 nm and light transmittances ofhigher than 80% in the visible region.In addition,the polyimides exhibit good thermal stability with an initial decompositiontemperature(T_d)higher than 530℃ and have more than 60% of residual weight retentions at 700℃.

Synthesis and Bioactivity of Novel Fluorinated Heteroaromatic Ureas

In order to find new urea cytokinins, a series of novel fluorinated heteroaromatic ureas have been designed and synthesized, The crystal structure of 3g was further determined by single crystal X-ray diffraction to obtain the structural feature of this class of urea compounds. The preliminary bioassay showed that some title compounds have good cytokinin activity.

SELF-ASSEMBLED MICRO-DOMAINS ON THE UPPERMOST SURFACE OF FLUORINATED POLY(CARBONATE URETHANE)S WITH FLUORINATED SIDE CHAIN ATTACHED ON HARD SEGMENTS

The surface phase separated structure of polyurethanes is always desired due to the advantage of better biocompatibility, compared with the homogeneous one. The key issue is how to control and characterize the surface morphology. In this work, we report the uppermost surface morphology of fluorinated poly(carbonate urethane)s with fluorinated side chains attached to hard segments as studied by AFM, XPS and contact angle measurement. A self-assembled micro-domain with the fluorinated side chain standing up on the uppermost surface has been proposed for polyurethane with higher fluorinated content, based on the result obtained.