Geochemistry and depositional environment of fuchsite quartzites from Sargur Group,western Dharwar Craton,India

Meso-Neoarchean fuchsite quartzites are present in different stratigraphic positions of Dharwar Craton including the oldest(~3.3 Ga)Sargur Group of western Dharwar Craton.The present study deals with the petro-graphic and geochemical characteristics of the fuchsite quartzites from the Ghattihosahalli belt to evaluate their genesis,depositional setting and the enigma involved in the ancient sedimentation history.Their major mineral assemblages include quartz,fuchsite,and feldspars along with accessory kyanite and rutile.The geochemical com-positions are characterized by high SiO_(2),Al_(2)O_(3),low MgO,CaO,strongly enriched Cr(1326–6899 ppm),Ba(1165–3653 ppm),Sr(46–210 ppm),V(107–868 ppm)and Zn(11–158 ppm)contents compared to the upper continental crust(UCC).The UCC normalized rare earth element(REE)patterns are characterized by depleted light REE[(La/Sm)UCC=0.33–0.95]compared to heavy REE[(Gd/Yb)_(UCC)=0.42–1.65]with conspicuous positive Eu-anomalies(Eu/Eu^(*)=1.35–18.27)characteristic of hydrothermal solutions evidenced through the interlayered barites.The overall major and trace element systematics reflect a combined mafic-felsic provenance and suggest their deposition at a passive continental margin environ-ment.The comprehensivefield,petrographic,and geo-chemical studies indicate that these quartzites are infiltrated by Cr-richfluids released during high-grade metamorphism of associated ultramafic rocks.The Sargur and the subse-quent Dharwar orogeny amalgamated diverse lithounits from different tectonic settings,possibly leading to the release of Cr-richfluids and the formation of fuchsite quartzite during or after the orogeny.Thesefindings sug-gest a pre-existing stable crust prior to the Sargur Group and the link between orogenic events and various mineral deposits in the Dharwar Craton.

Depositional process of hyperpycnal flow deposits:A case study on Lower Cretaceous Sangyuan outcrop in the Luanping Basin,Northeast China

Sedimentary process research is of great significance for understanding the distribution and characteristics of sediments.Through the detailed observation and measurement of the Sangyuan outcrop in Luanping Basin,this paper studies the depositional process of the hyperpycnal flow deposits,and divides their depositional process into three phases,namely,acceleration,erosion and deceleration.In the acceleration phase,hyperpycnal flow begins to enter the basin nearby,and then speeds up gradually.Deposits developed in the acceleration phase are reverse.In addition,the original deposits become unstable and are taken away by hyperpycnal flows under the eroding force.As a result,there are a lot of mixture of red mud pebbles outside the basin and gray mud pebbles within the basin.In the erosion phase,the reverse deposits are eroded and become thinner or even disappear.Therefore,no reverse grading characteristic is found in the proximal major channel that is closer to the source,but it is still preserved in the middle branch channel that is far from the source.After entering the deceleration phase,normally grading deposits appear and cover previous deposits.The final deposits in the basin are special.Some are reverse,and others are normal.They are superimposed with each other under the action of hyperpycnal flow.The analysis of the Sangyuan outcrop demonstrates the sedimentary process and distribution of hyperpycnites,and reasonably explain the sedimentary characteristics of hyperpycnites.It is helpful to the prediction of oil and gas exploration targets in gravity flow deposits.

Depositional Environment and Origin of Inertinite-rich Coal in the Ordos Basin

Inertinite-rich coal is widely distributed in the Ordos Basin,represented by the No.2 coal seam of the Middle Jurassic Yan'an Formation.This paper combined coal petrology and geochemistry to analyze the origin of inertinite,changes in the coal-forming environment and control characteristics of wildfire.Research has shown that there are two forms of inertinite sources in the study area.Alongside typical fusinization,wildfire events also play a substantial role in inertinite formation.There are significant fluctuations in the coal-forming environment of samples at different depths.Coal samples were formed in dry forest swamp with low water levels and strong oxidation,which have a high inertinite content,and the samples formed in wet forest swamp and limnic showed low inertinite content.Conversely,the inertinite content of different origins does not fully correspond to the depositional environment characterized by dryness and oxidation.Nonpyrogenic inertinites were significantly influenced by climatic conditions,while pyrofusinite was not entirely controlled by climatic conditions but rather directly impacted by wildfire events.The high oxygen level was the main factor causing widespread wildfire events.Overall,the combination of wildfire activity and oxidation generates a high content of inertinite in the Middle Jurassic coal of the Ordos Basin.

Biological origin and depositional environment of crude oils in the Qiongdongnan Basin: Insights from molecular biomarkers and whole oil carbon isotope

Molecular biomarker and whole oil carbon isotope(δ^(13)C_(oil)) analyses were conducted on eleven typical crude oils from the Qiongdongnan Basin to investigate their biological sources and depositional environments. Saturated hydrocarbon biomarkers in most samples are characterized by angiosperm-derived compounds, with aromatic compounds dominated by the naphthalene, phenanthrene, biphenyl, and fluorene series. The related source rocks of these oils were mainly deposited under oxic condition, but a subanoxic-suboxic and enclosed water column condition in the Central Depression during Oligocene.The identification of simonellite and related compounds in the aromatic fractions provides reliable evidence for the input of coniferous gymnosperms. Cadalene may also have a potential association with gymnosperms since it shows a strong positive correlation with simonellite. Evidence from density, nalkanes, short-chain alkylbenzenes and secondary brine inclusions indicates that the unique crude oil B13-1 may have suffered from thermal alteration. These crude oils(excluding B13-1) can be classified into four types based on the δ^(13)C_(oil)values and molecular biomarkers. Type A oil(solely S34-3) is characterized by non-angiosperm plants, with minor dinoflagellates and increasing contribution from conifer gymnosperms than others. Type B oils(L17-2, L18-1, L25-1, and L25-1W) show heavy δ^(13)C_(oil)(-24 ‰to-25 ‰) and mixed contributions from both angiosperms and marine algae, with the marine algae contribution increasing. Type C oils(L13-2 and B21-1) share similar biological sources with Type B, but the moderately δ^(13)C_(oil)(-25‰ to-26‰) and high level of terrestrial biomarkers suggesting a predominant contribution of angiosperms. Type D oils(Y13-1a, Y13-1b, and Y13-4) possess the lightestδ^(13)C_(oil)(mainly below-26‰) and are primarily derived from angiosperms, with mangrove vegetation playing an important role. Spearman correlation analysis among 14 source biomarker parameters withδ^(13)C_(oil)and geological setting of related source rocks implied that the marine algae should be responsible for the heavy δ^(13)C_(oil)in the Type B. The contribution of marine algae in the Central Depression may have been neglected in the past, as it is usually covered by remarkable angiosperm biomarkers.

Distribution and geochemical significance of alkylbenzenes for crude oil with different depositional environments and thermal maturities

A total of 45 alkylbenzenes were detected and identified in crude oils with different depositional environments and thermal maturities from the Tarim Basin,Beibuwan Basin,and Songliao Basin using comprehensive two-dimensional gas chromatography time-of-flight mass spectrometry(GC×GCTOFMS).By analyzing the distribution characteristics of C0-C5alkylbenzenes,it is found that the content of some alkylbenzenes varies greatly in crude oils.Based on the distribution characteristics of 1,2,4,5-tetramethylbenzene(Te MB)and 1,2,3,4-Te MB,the ratio of 1,2,4,5-Te MB to 1,2,3,4-Te MB is proposed to indicate the organic matter origin and depositional environment of ancient sediments.Oil samples originated mainly from lower hydrobiont,algae,bacteria and source rocks deposited under reducing/anoxic conditions have low 1,2,4,5-/1,2,3,4-Te MB values(less than 0.6),while oil samples originated mainly from terrestrial higher plants and source rocks deposited under oxic/sub-oxic conditions have higher 1,2,4,5-/1,2,3,4-Te MB values(greater than 1.0).The significant difference of 1,2,4,5-/1,2,3,4-Te MB values is controlled by 1,2,4,5-Te MB content.1,2,4,5-Te MB content in oils derived from source rocks deposited in oxidized sedimentary environment(greater than 1.0 mg/g whole oil)is higher than that in oils from source rocks deposited in reduced sedimentary environment(less than 1.0 mg/g whole oil).1,2,4,5-/1,2,3,4-Te MB ratio might not or slightly be affected by evaporative fractionation,biodegradation and thermal maturity.1,2,4,5-/1,2,3,4-Te MB ratio and 1,2,4,5-Te MB content can be used as supplementary parameter for the identification of sedimentary environment and organic matter input.It should be noted that compared to the identification of organic matter sources,the 1,2,4,5-/1,2,3,4-Te MB parameter is more effective in identifying sedimentary environments.

Depositional model of the Member Deng-2 marginal microbial mound-bank complex of the Dengying Formation in the southwestern Sichuan Basin, SW China: Implications for the Ediacaran microbial mound construction and hydrocarbon exploration

Recent advances in hydrocarbon exploration have been made in the Member Deng-2 marginal microbial mound-bank complex reservoirs of the Dengying Formation in the western Sichuan Basin, SW China,where the depositional process is regarded confusing. The microfacies, construction types, and depositional model of the Member Deng-2 marginal microbial mound-bank complex have been investigated using unmanned aerial vehicle photography, outcrop section investigation, thin section identification,and seismic reflections in the southwestern Sichuan Basin. The microbialite lithologic textures in this region include thrombolite, dendrolite, stromatolite, fenestral stromatolite, spongiostromata stone,oncolite, aggregated grainstone, and botryoidal grapestone. Based on the comprehensive analysis of“depositional fabrics-lithology-microfacies”, an association between a fore mound, mound framework,and back mound subfacies has been proposed based on water depth, current direction, energy level and lithologic assemblages. The microfacies of the mound base, mound core, mound flank, mound cap, and mound flat could be recognized among the mound framework subfacies. Two construction types of marginal microbial mound-bank complex have been determined based on deposition location, mound scale, migration direction, and sedimentary facies association. Type Jinkouhe microbial mound constructions(TJMMCs) develop along the windward margin owing to their proximity to the seaward subfacies fore mound, with a northeastwardly migrated microbial mound on top of the mud mound,exhibiting the characteristics of large-sized mounds and small-sized banks in the surrounding area. Type E'bian microbial mound constructions(TEMMCs) primarily occur on the leeward margin, resulting from the presence of onshore back mound subfacies, with the smaller southwestward migrated microbial mounds existing on a thicker microbial flat. The platform margin microbial mound depositional model can be correlated with certain lateral comparison profile and seismic reflection structures in the 2D seismic section, which can provide references for future worldwide exploration. Microbial mounds with larger buildups and thicker vertical reservoirs are typically targeted on the windward margin, while small-sized microbial mounds and flats with better lateral connections are typically focused on the leeward margin.

Impact of Pollutant Concentration and Particle Deposition on the Radiative Flow of Casson-Micropolar Fluid between Parallel Plates

Assessing the behaviour and concentration of waste pollutants deposited between two parallel plates is essential for effective environmental management.Determining the effectiveness of treatment methods in reducing pollution scales is made easier by analysing waste discharge concentrations.The waste discharge concentration analysis is useful for assessing how effectively wastewater treatment techniques reduce pollution levels.This study aims to explore the Casson micropolar fluid flow through two parallel plates with the influence of pollutant concentration and thermophoretic particle deposition.To explore the mass and heat transport features,thermophoretic particle deposition and thermal radiation are considered.The governing equations are transformed into ordinary differential equations with the help of suitable similarity transformations.The Runge-Kutta-Fehlberg’s fourthfifth order technique and shooting procedure are used to solve the reduced set of equations and boundary conditions.The integration of a neural network model based on the Levenberg-Marquardt algorithm serves to improve the accuracy of predictions and optimize the analysis of parameters.Graphical outcomes are displayed to analyze the characteristics of the relevant dimensionless parameters in the current problem.Results reveal that concentration upsurges as the micropolar parameter increases.The concentration reduces with an upsurge in the thermophoretic parameter.An upsurge in the external pollutant source variation and the local pollutant external source parameters enhances mass transport.The surface drag force declines for improved values of porosity and micropolar parameters.

Influence of laser shock peening on microstructure and high-temperature oxidation resistance of Ti45Al8Nb alloy fabricated via laser melting deposition

Laser shock peening(LSP)was used to enhance the high-temperature oxidation resistance of laser melting deposited Ti45Al8Nb alloy.The microstructure and high-temperature oxidation behavior of the as-deposited Ti45Al8Nb alloy before and after LSP were investigated by scanning electron microscopy,X-ray diffraction,and electron backscatter diffraction.The results indicated that the rate of mass gain in the as-deposited sample after LSP exhibited a decrease when exposed to an oxidation temperature of 900℃,implying that LSP-treated samples exhibited superior oxidation resistance at high temperatures.A gradient structure with a fine-grain layer,a deformed-grain layer,and a coarse-grain layer was formed in the LSP-treated sample,which facilitated the diffusion of the Al atom during oxidation,leading to the formation of a dense Al_(2)O_(3)layer on the surface.The mechanism of improvement in the oxidation resistance of the as-deposited Ti45Al8Nb alloy via LSP was discussed.

Microstructure and depositional mechanism of Ni-P coatings with nano-ceria particles by pulse electrodeposition

Nano-CeO2 （RE） particles were co-deposited into Ni-P binary composite coatings by applying pulse current （PC） under ultrasonic （U） field. Morphology, chemical content and crystal microstructure were characterized by environmental scanning electron microscopy （E-SEM） with energy dispersive X-ray analysis （EDXA）, XRD diffractometry and transmission electron microscopy （TEM）. Experimental results show that Ni-P coating reinforced with 15g/L nano-CeO2, in amorphous state and with compact structure, can be improved in the microhardness from HV0.2580 to HV0.2780 by annealing at 600 °C for 2 h. The highest content of codeposited Ce and deposition rate can reach 2.3% and 68 μm/h, respectively. Furthermore, the effect of RE adsorption and pulse overpotential on depositional mechanism was investigated. n-CeO2 particles or Ce4＋ ions with strong adsorption capacity acted as the catalytic nucleus to improve densification effectively. During annealing at 600 °C for 2 h, n-CeO2 particles will uniformly adsorb on crystal grain to preferentially pad and heal up gaps of cracking Ni boundaries, promoting dispersion strengthening with refiner-grained structure.

Assessment of widely used methods to derive depositional ages from detrital zircon populations

The calculation of a maximum depositional age(MDA)from a detrital zircon sample can provide insight into a variety of geological problems.However,the impact of sample size and calculation method on the accuracy of a resulting MDA has not been evaluated.We use large populations of synthetic zircon dates(N≈25,000)to analyze the impact of varying sample size(n),measurement uncertainty,and the abundance of neardepositional-age zircons on the accuracy and uncertainty of 9 commonly used MDA calculation methods.Furthermore,a new method,the youngest statistical population is tested.For each method,500 samples of n synthetic dates were drawn from the parent population and MDAs were calculated.The mean and standard deviation of each method ove r the 500 trials at each n-value(50-1000,in increments of 50)were compa red to the known depositional age of the synthetic population and used to compare the methods quantitatively in two simulation scenarios.The first simulation scenario varied the proportion of near-depositional-age grains in the synthetic population.The second scenario varied the uncertainty of the dates used to calculate the MDAs.Increasing sample size initially decreased the mean residual error and standard deviation calculated by each method.At higher n-values(>~300 grains),calculated MDAs changed more slowly and the mean resid ual error increased or decreased depending on the method used.Increasing the p roportion of near-depositional-age grains and lowering measurement uncertainty decreased the number of measurements required for the calculated MDAs to stabilize and decreased the standard deviation in calculated MDAs of the 500 samples.Results of the two simulation scenarios show that the most successful way to increase the accuracy of a calculated M DA is by acquiring a large number of low-uncertainty measurements(300300)approach is used if the calculation of accurate MDAs are key to research goals.Other acquisition method s,such as high-to moderate-precision measurement methods(e.g.,1%-5%,2σ)acquiring low-to moderate-n datasets(50300).Additionally,they are most susceptible to producing erroneous MDAs due to contamination in the field or laboratory,or through disturbances of the youngest zircon’s U-Pb systematics(e.g.,lead loss).More conservative methods that still produce accurate MDAs and are less susceptible to contamination or lead loss include:youngest grain cluster at 1σunce rtainty(YGC 1σ),youngest grain clusterat 2σuncertainty(YGC 2σ),and youngest statistical population(YSP).The ages calculated by these methods may be more useful and appealing when fitting calculated MDAs in to pre-existing chronostratigraphic frameworks,as they are less likely to be younger than the true depositional age.From the results of our numerical models we illustrate what geologic processes(i.e.,tectonic or sedimentary)can be resolved using MDAs derived from strata of different ages.

Palaeogeomorphology and its control on the development of sequence stratigraphy and depositional systems of the Early Silurian in the Tarim Basin

The Silurian in the Tarim Basin was deposited on the basement deformed by the Caledonian tectonic movements at the end of the Late Ordovician. The development and distribution of sedimentary sequences of the Early Silurian have been clearly controlled by the palaeogeomorphology of the Late Ordovician. Based on unconformity characteristics and distribution of erosion, several zones can be differentiated including a high uplifted erosion zone, a transitional slope zone and a depression zone. The central and west Tabei Uplift zones show high angular unconformity and intense erosion. The Tarim Basin in the late Ordovician shows characteristics of higher in the west, lower in the east while higher in the south, lower in the north. The Early Silurian mainly developed transgressive and highstand systems tracts on the whole, while the lowstand systems tract only developed partly below the slope break. The palaeogeomorphology controlled the elastic source supply and deposit distribution. Braided delta system and tidal flat-estuary system were deposited. The duration of uplifting of the Tazhong paleo- uplift was longer than that of the Tabei paleo-uplift, and deposition was later. This led to the lower and middle members of the Kepingtage Formation missing in that area. As a large-scale transgression occurred during the deposition period of the upper member of the Kepingtage Formation, sediment from the west of the basin was transported and deposited by tides and waves, forming tidal-marine debris systems above the uplift. Proximal alluvial fan and fan delta coarse elastic deposits developed in proximal uplift zone in the east and southeast of the basin, and braided delta put forward to the transitional zone between the edge of uplift and the sea. Large-scale tidal channel, sub-distributary channel and mouth bar of the delta front can form favorable reservoirs, and they are primary targets for oil and gas exploration. This research on sequence-depositional systems development and distribution controlled by palaeogeomorphology is significant in guiding the prediction of reservoir sandstones.

Geochronology and Geochemistry of the Radiolarian Cherts of the Mada'er Area,Southwestern Tianshan:Implications for Depositional Environment

In the southwestern Tianshan,the geologic ages of many strata and their depositional environments are still poorly constrained because of complex structures.The Mada＇er area is located in the Kuokesaleling belt,Southwestern Tianshan.The cherts from the former Wupata＇erkan Group contain abundant radiolarian fossils,including 10 species which are identified as late Devonian to early Carboniferous in age.Eleven chert samples have SiO_2 contents ranging from 88.80 wt%to 93.28 wt%, and 2.02 wt%to 3.72 wt%for Al_2O_3.The SiO_2/Al_2O_3 ratios of all samples vary from 23.84 to 46.11, much lower than those of the pure cherts（80-1400）.These values suggest that the cherts contain high ratios of terrigenous materials.The Al_2O_3/（Al_2O_3＋Fe_2O_3）ratios vary between 0.64 and 0.77,whereas V and Cu concentrations range from 10.92 ppm to 26.7 ppm and from 2.15 ppm to 34.1 ppm respectively. The Ti/V ratios vary from 25.53 to 44.93.The total REE concentrations of the cherts are between 30.78 ppm and 59.26 ppm,averaging 45.46 ppm.The（La/Ce）_N ratios range from 0.81 to 1.12,and 0.88-1.33 for（La/Yb）_N,averaging 1.09,which suggests a continental margin environment.Consequently,it is inferred that the cherts formed in a residual sea environment during the late Devonian to early Carboniferous time,which suggests that the collision between the Karakum-Tarim and Kazakhstan-Junggar plates did not occur at the time.In addition,the regional geological information indicates that the study area experienced a post-collision stage during the early Permian,and thus it is likely that the collision between the two plates took place in the late Carboniferous.

Mass-transport Deposits of the Upper Cretaceous Qingshankou Formation, Songliao Terrestrial Basin, Northeast China: Depositional Characteristics, Recognition Criteria and External Geometry

Extensive mass transport deposits（MTDs）, which form a significant component of the stratigraphic record in ancient and modern deep water systems, mostly distributed in the continental margin of ocean basins worldwide. To date, no large-scale MTDs have been found in Chinese terrestrial basins. Based on integrated analysis of the seismic, drilling, core and logging data, this article report MTDs have been found in Songliao terrestrial basin（SLTB）, Northeast China. During the depositional period of the Upper Cretaceous Qingshankou Formation, slope break of lacustrine basins was an ideal discharge place for gravity depositions. Regional sedimentary study of MTDs reveals that Cretaceous-age MTDs in SLTB were deposited in slope-break environments by slide, slump and debris flow, and MTDs were mixed with little turbidite simultaneously. Besides the massive aspect, key features of MTDs are the common presence of deformational structures or softsedimentary deformation, floating shale clasts, boudins, microfaults, distortion beddings, rotated sand debris. Detailed mapping of two three-dimensional（3-D） seismic surveys acquired in Yingtai（YT） and Haituozi（HTZ） areas reveals that MTDs are characterized by chaotic, mounded, and transparent seismic reflection. Growth fault, slope gully and geomorphology of the slope break greatly influenced the sedimentary process and external geometry of MTDs, and as a consequence, MTDs in SLTB exhibit classic fan-like geometry and some special（non-fan-like） external geometry. Furthermore, fanlike MTDs can be divided into three subcategories, including isolated fan, mother-son fan and stacked fan. Non-fan-like MTDs can be divided into two subcategories, strip-like MTDs and faulted-pit MTDs. A new sedimentary model has been built for MTDs in SLTB. MTDs have become a new exploration and development target in the SLTB.

Late Carboniferous-Early Permian Sequence Stratigraphy and Depositional Evolution in the Northeast Ordos Basin,North China

Sequence stratigraphical analysis was applied to the Upper Carboniferous-Lower Permian sedimentary succession of the northeastern Ordos Basin, north China based on data acquired from ten entire logging curves and eight outcrops. The facies framework of the lithostratigraphical unit, the Taiyuan Formation comprises seven facies in two facies associations, varying from fluvio-delta to shelf-barrier islands. The facies are presented within a chronostratigraphical framework, linked by systems tract, which in turn are limited by flooding surfaces and sequence boundaries. Six third-order depositional sequences are recognised, bounded by six type 2 unconformities. An upwards-shallowing epicontinental sea sedimentary model is created, which consists of a sandstone, coal seam and carbonate succession.

Depositional and Ecological Features of Permian Oxygen Deficient Deposits at Shangsi Section,Northeast Sichuan,China

Because oxygen deficient conditions enhance the preservation of depositional organic matter, analysis on paleooxygenation conditions of depositional environments becomes a routine work in evaluations of potential hydrocarbon source rocks. The article focuses on depositional and ecological features relating to oxygen deficient shelfal environments at the Shangsi （上寺） Section, as a part of multidiscipline collaboration to reevaluate the hydrocarbon potential of the Middle and Upper Permian, Guangyuan （广元）, Northeast Sichuan （四川） Province. Ichnofabric Zoophycos, sepiolite-bearing limestones （SBL） were interpreted as indicators of dysaerobic environments. Laminated calcareous and/or siliceous mudstones with pelagic ammonites and radiolarians were believed to be the deposits of anaerobic environments. When rhythmic succession was considered, average strategy was adopted for the oxygenation explanation of a given interval. The anaerobic condition in this Permian section was observed in the upper part of the latest Permian Dalong （大隆） Formation, in which siliceous mudstones with ammonite, radiolarians develop in association with lower U/Mo ratio, lower blomarker ratio of Pr/Ph, and the highest TOC content. The topmost Maokou （茅口） Formation, featured by thin-bedded calcareous and siliceous mudstones with ammonite, thin-shelled bivalves, and laminations would be deposits of the quasianaerobic condition. The middle part of the Members Ⅰ and Ⅲ of the Chihsia Formation is proposed to be dysaerobic condition as indicated by occurrences of SBL and ichnofabric features, with the Member Ⅲ being the severe dysaerobic condition.

Depositional Patterns and Oil／Gas Accumulation Features of Sha-3 Member Turbidites in Dongying Depression, Bohai Bay Basin

Recent exploration results indicate that a significant exploration potential remains in the Dongying Depression of the Bohai Bay Basin and the undiscovered oil and gas are largely reservoired in subtle traps including turbidite litholigcal traps of the Sha-3 Member. In order to effectively guide the exploration program targeting turbidites, this study will focus on the depositional models of the Sha-3 Member turbidites and oil/gas accumulation characteristics in these turbidites. Two corresponding relationships were found. One is that the East African Rift Valley provides a modern analog for the depositional systems in the Dongying Depression. The other is that the depositional models of line-sourced slope aprons, single point-source submarine fan and multiple source ramp turbidite, established for deep-sea turbidites, can be applied to interpret the depositional features of the turbidite fans of three different origins: slope turbidite aprons, lake floor turbidite fans and delta-fed turbidite fans in the Sha-3 Member. Updip sealing integrity is the key factor determining whether oil/gas accumulates or not in the slope aprons and lake floor fans. The factors controlling oil/gas migration and accumulation in the delta-fed turbidite fans are not very clear. Multiple factors rather than a single factor probably played significant roles in these processes.

Depositional architecture of the late Ordovician drowned carbonate platform margin and its responses to sea-level fluctuation in the northern slope of the Tazhong region, Tarim Basin

The Tazhong Uplift of the late Ordovician is a drowned rimmed carbonate platform. The carbonate rock of the late Ordovician Lianglitage Formation in the northern slope of the Tazhong region is one of the significant petroliferous intervals. Based on petrofacies, depositional cycles, natural gammaray spectrometry and carbon/oxygen isotope data from the Lianglitage Formation, one 2nd-order, three 3rd-order and several 4th-order sequences have been recognized, and the late Ordovician relative sealevel fluctuation curve has been established. The sequences O3 1-1 and O3 1-2 on the platform are composed of highstand and transgressive systems tracts, but lack the lowstand systems tract. The sequence O3 1-3 is a drowning sequence. The sequence O3 1-1 overlapped the eroded slope and pinched out to the northwest and landward. The highstand systems tract in the sequence O3 1-2 consists of low-angle sigmoid and high-angle shingled progradation configuration. Major sedimentary facies of the Lianglitage Formation include reef and shoal in the platform margin and lagoon, which can be subdivided into coral-sponge-stromatoporoid reef complex, sand shoal, lime mud mound, and intershoal sea. Reefs, sand shoals and their complex are potential reservoir facies. The reefs and sand shoals in the sequence O3 1-1 developed in the upper of its highstand systems tract. In the sequence O3 1-2, the highstand systems tract with an internal prograding configuration is a response to the lateral shifting of the complex of reef and sand shoal. The transgressive systems tract, in particular the sand shoals, developed widely on the slope of the platform margin and interior. The reefs in the sequence O3 1-3 migrated towards high positions and formed retrograding reefs in the western platform and low relief in the platform interior. Basinward lateral migration of the reefs and pure carbonate rock both characterize highstand systems tract and show that the rise of the relative sea-level was very slow. Shingled prograding stacking pattern of the 4th-order sequences and reefs grow horizontally, which represents the late stage of highstand systems tract and implies relative sealevel stillstand. Reefs migrating towards high land and impure carbonate rock both indicate transgressive systems tract and suggest that the relative sea-level rose fast. Erosional truncation and epidiagenetic karstification represent a falling relative sea-level. The relative sea-level fluctuation and antecedent palaeotopography control the development and distribution of reef complexes and unconformity karst zones. Currently, the composite zone of epidiagenetic karstic intervals and high-energy complexes of reefs and sand shoals with prograding configuration is an important oil and gas reservoir in the northern slope of the Tazhong carbonate platform.

Sedimentary facies and depositional model of shallow water delta dominated by fluvial for Chang 8 oil-bearing group of Yanchang Formation in southwestern Ordos Basin,China

A systematic analysis of southwestern Ordos Basin's sedimentary characteristics,internal architectural element association styles and depositional model was illustrated through core statistics,well logging data and outcrop observations in Chang 8 oil-bearing group.This analysis indicates that shallow water delta sediments dominated by a fluvial system is the primary sedimentary system of the Chang 8 oil-bearing group of the Yanchang Formation in southwestern Ordos Basin.Four microfacies with fine grain sizes are identified: distributary channels,sheet sandstone,mouth bar and interdistributary fines.According to the sandbody's spatial distribution and internal architecture,two types of sandbody architectural element associations are identified: amalgamated distributary channels and thin-layer lobate sandstone.In this sedimentary system,net-like distributary channels at the delta with a narrow ribbon shape compose the skeleton of the sandbody that extends further into the delta front and shades into contiguous lobate distribution sheet sandstone in the distal delta front.The mouth bar is largely absent in this system.By analyzing the palaeogeomorphology,the palaeostructure background,sedimentary characteristics,sedimentary facies types and spatial distribution of sedimentary facies during the Chang 8 period,a distinctive depositional model of the Chang 8 shallow water fluvial-dominated delta was established,which primarily consists of straight multi-phase amalgamated distributary channels in the delta plain,net-like distributary channels frequently diverting and converging in the proximal delta front,sheet sandstones with dispersing contiguous lobate shapes in the distal delta front,and prodelta or shallow lake mudstones.

Ore-forming Response to Syndepositional Submarine Volcanism in Langshan-Zhaertai Mesoproterozoic SEDEX Ore Belt, Inner Mongolia, China

Ore forming process of the Dongshengmiao, Huogeqi, Tanyaokou and Jiashengpan deposits in Langshan Zhaertai Mesoproterozoic SEDEX metallogenic belt is closely related to the syndepositional volcanic activities based on the following facts: (1) The Sm Nd isochron age of the basic volcanic rocks varies from 1 491 Ma to 1 824 Ma (more than or close to the model age of the lead isotope of all sulfide minerals) in these deposits, with ε (Nd, t ) =(3.48-6.40)±0.80, whose REE composition is enriched in LREE and depleted in HREE, indicating that these volcanic rocks were derived from the mantle or lower crust. (2) The REE composition of some Pb Zn Py ores is also enriched in LREE and depleted in HREE. The chondrite normalized REE patterns are similar to those of the basic volcanic rocks. (3) In the lead isotope composition diagram of Doe and Zartman, most of sphalerite, galena, pyrite, pyrrhotite and chalcopyrite are plotted on both sides of the line for the mantle or between the lines for the mantle and lower crust. (4) Cobalt content of some pyrites is much higher than their nickel content ( w (Co)/ w (Ni)= 11.91- 12.19). (5) Some volcanic blocks and debrises have been picked out from some pyrite and pyrrhotite ores. (6) All Zn Pb Cu Fe sulfide orebodies in these deposits occur in the strata overlying the metamorphic volcanic rocks in the only second ore bearing formation. The Jiashengpan deposit lacks in syndepositional volcanic rocks in the host succession, only Pb and Zn occur without Cu, but the Dongshengmiao, Tanyaokou and Huogeqi deposits with syndepositonal volcanic rocks in the host succession contain Cu, indicating the relatively high ore forming temperatures, besides Pb and Zn. The syndepositional volcanic eruption directly supplied some ore forming metals and resulted in the secular geothermal anomaly favorable for the circulation of the submarine convective hydrothermal system, and in the precipitation of deep mineralizing fluids exhaling into the anoxide basins along the syndepositional fault system in the Langshan Zhaertai rift.

Depositional Age, Provenance Characteristics and Tectonic Setting of the Ailaoshan Group in the Southwestern South China Block

The depositional and metamorphic ages and provenances of the Ailaoshan(ALS) Group in the Ailaoshan-Red River(ALS-RR) shear zone, southwestern South China Block(SCB), were investigated to constrain the tectonic history of the southwestern SCB. In this study, we use petrology, geochemical analysis, zircon cathodoluminescence imaging and UPb geochronology to analyse samples of quartzite, garnet-bearing two-mica schist and metapelite. The age spectra of detrital zircon grains from these metasediments show two dominant age peaks at 550–424 Ma and 876–730 Ma and two subordinate peaks at 970–955 Ma and ~2450 Ma. The youngest peak, corresponding to the early Palaeozoic, accounts for more than 20% of the total dates and constrains the deposition of the ALS Group to the Palaeozoic rather than the Palaeoproterozoic as traditionally thought. Moreover, two peaks of metamorphic ages corresponding to the Permo-Triassic and Cenozoic were also identified, and these ages document the tectonothermal events associated with the Indosinian collision between the Indochina Block and the SCB and the Himalayan collision between the Indian and Asian plates. Geochemical data suggest that the provenances of the ALS Group were dominated by continental arc and recycled metasedimentary rocks. The comparison of probability density distribution plots of the detrital zircon U-Pb age data indicates that the Neoproterozoic detritus in the ALS Group was probably derived from the arc-related Neoproterozoic intrusive bodies in the northwestern and southwestern SCB. Furthermore, the early Palaeozoic detritus might have been sourced from eroded early Palaeozoic strata and magmatic plutons in Cathaysia and volcanic rocks in the western Indochina Block.